# Makefile for VIM on Win32 (Cygwin and MinGW) # # This file contains common part for Cygwin and MinGW and it is included # from Make_cyg.mak and Make_ming.mak. # # Info at http://www.mingw.org # Alternative x86 and 64-builds: http://mingw-w64.sourceforge.net # Also requires GNU make, which you can download from the same sites. # Get missing libraries from http://gnuwin32.sf.net. # # Tested on Win32 NT 4 and Win95. # # To make everything, just 'make -f Make_ming.mak'. # To make just e.g. gvim.exe, 'make -f Make_ming.mak gvim.exe'. # After a run, you can 'make -f Make_ming.mak clean' to clean up. # # NOTE: Sometimes 'GNU Make' will stop after building vimrun.exe -- I think # it's just run out of memory or something. Run again, and it will continue # with 'xxd'. # # "make upx" makes *compressed* versions of the 32 bit GUI and console EXEs, # using the excellent UPX compressor: # https://upx.github.io/ # "make mpress" uses the MPRESS compressor for 32- and 64-bit EXEs: # http://www.matcode.com/mpress.htm # # Maintained by Ron Aaron et al. # Updated 2014 Oct 13. #>>>>> choose options: # FEATURES=[TINY | SMALL | NORMAL | BIG | HUGE] # Set to TINY to make minimal version (few features). FEATURES=HUGE # Set to yes for a debug build. DEBUG=no # Set to yes to create a mapfile. #MAP=yes # Set to yes to measure code coverage. COVERAGE=no # Better encryption support using libsodium. # Set to yes or specify the path to the libsodium directory to enable it. #SODIUM=yes # Set to SIZE for size, SPEED for speed, MAXSPEED for maximum optimization. OPTIMIZE=MAXSPEED # Set to yes to make gvim, no for vim. GUI=yes # Set to yes to enable the DLL support (EXPERIMENTAL). # Creates vim{32,64}.dll, and stub gvim.exe and vim.exe. # "GUI" should be also set to "yes". #VIMDLL=yes # Set to no if you do not want to use DirectWrite (DirectX). # MinGW-w64 is needed, and ARCH should be set to i686 or x86-64. DIRECTX=yes # Disable Color emoji support # (default is yes if DIRECTX=yes, requires WinSDK 8.1 or later.) #COLOR_EMOJI=no # Set to one of i386, i486, i586, i686 as the minimum target processor. # For amd64/x64 architecture set ARCH=x86-64 . # If not set, it will be automatically detected. (Normally i686 or x86-64.) #ARCH=i686 # Set to yes to cross-compile from unix; no=native Windows (and Cygwin). CROSS=no # Set to path to iconv.h and libiconv.a to enable using 'iconv.dll'. # Use "yes" when the path does not need to be define. #ICONV="." ICONV=yes GETTEXT=yes # Set to yes to include IME support. IME=yes DYNAMIC_IME=yes # Set to yes to enable writing a postscript file with :hardcopy. POSTSCRIPT=no # Set to yes to enable OLE support. OLE=no # Set the default $(WINVER). Use 0x0501 to make it work with WinXP. ifndef WINVER # WINVER = 0x0501 WINVER = 0x0600 endif # Set to yes to enable Cscope support. CSCOPE=yes # Set to yes to enable Netbeans support (requires CHANNEL). NETBEANS=$(GUI) # Set to yes to enable inter process communication. ifeq (HUGE, $(FEATURES)) CHANNEL=yes else CHANNEL=$(GUI) endif # Set to yes to enable terminal support. ifeq (HUGE, $(FEATURES)) TERMINAL=yes else TERMINAL=no endif # Set to yes to enable sound support. ifneq ($(findstring $(FEATURES),BIG HUGE),) SOUND=yes else SOUND=no endif ifndef CTAGS # this assumes ctags is Exuberant ctags CTAGS = ctags -I INIT+,INIT2+,INIT3+,INIT4+,INIT5+ --fields=+S endif # Link against the shared version of libstdc++ by default. Set # STATIC_STDCPLUS to "yes" to link against static version instead. ifndef STATIC_STDCPLUS STATIC_STDCPLUS=no endif # Link against the shared version of libwinpthread by default. Set # STATIC_WINPTHREAD to "yes" to link against static version instead. ifndef STATIC_WINPTHREAD STATIC_WINPTHREAD=$(STATIC_STDCPLUS) endif # If you use TDM-GCC(-64), change HAS_GCC_EH to "no". # This is used when STATIC_STDCPLUS=yes. HAS_GCC_EH=yes # If the user doesn't want gettext, undefine it. ifeq (no, $(GETTEXT)) GETTEXT= endif # Added by E.F. Amatria 2001 Feb 23 # Uncomment the first line and one of the following three if you want Native Language # Support. You'll need gnu_gettext.win32, a MINGW32 Windows PORT of gettext by # Franco Bez . It may be found at # http://home.a-city.de/franco.bez/gettext/gettext_win32_en.html # Tested with mingw32 with GCC-2.95.2 on Win98 # Updated 2001 Jun 9 #GETTEXT=c:/gettext.win32.msvcrt #STATIC_GETTEXT=USE_STATIC_GETTEXT #DYNAMIC_GETTEXT=USE_GETTEXT_DLL #DYNAMIC_GETTEXT=USE_SAFE_GETTEXT_DLL SAFE_GETTEXT_DLL_OBJ = $(GETTEXT)/src/safe_gettext_dll/safe_gettext_dll.o # Alternatively, if you uncomment the two following lines, you get a "safe" version # without linking the safe_gettext_dll.o object file. #DYNAMIC_GETTEXT=DYNAMIC_GETTEXT #GETTEXT_DYNAMIC=gnu_gettext.dll INTLPATH=$(GETTEXT)/lib/mingw32 INTLLIB=gnu_gettext # If you are using gettext-0.10.35 from http://sourceforge.net/projects/gettext # or gettext-0.10.37 from http://sourceforge.net/projects/mingwrep/ # uncomment the following, but I can't build a static version with them, ?-(| #GETTEXT=c:/gettext-0.10.37-20010430 #STATIC_GETTEXT=USE_STATIC_GETTEXT #DYNAMIC_GETTEXT=DYNAMIC_GETTEXT #INTLPATH=$(GETTEXT)/lib #INTLLIB=intl # Command definitions (depends on cross-compiling and shell) ifeq ($(CROSS),yes) # cross-compiler prefix: ifndef CROSS_COMPILE CROSS_COMPILE = i586-pc-mingw32msvc- endif DEL = rm MKDIR = mkdir -p DIRSLASH = / else # normal (Windows) compilation: ifndef CROSS_COMPILE CROSS_COMPILE = endif # About the "sh.exe" condition, as explained by Ken Takata: # # If the makefile is executed with mingw32-make and sh.exe is not found in # $PATH, then $SHELL is set to "sh.exe" (without any path). In this case, # unix-like commands might not work and a dos-style path is needed. # # If the makefile is executed with mingw32-make and sh.exe IS found in $PATH, # then $SHELL is set with the actual path of sh.exe (e.g. # "C:/msys64/usr/bin/sh.exe"). In this case, unix-like commands can be used. # # If it is executed by the "make" command from cmd.exe, $SHELL is set to # "/bin/sh". If the "make" command is in the $PATH, other unix-like commands # might also work. # # If it is executed by the "make" command from a unix-like shell, # $SHELL is set with the unix-style path (e.g. "/bin/bash"). # In this case, unix-like commands can be used. # ifneq (sh.exe, $(SHELL)) DEL = rm MKDIR = mkdir -p DIRSLASH = / else DEL = del MKDIR = mkdir DIRSLASH = \\ endif endif CC := $(CROSS_COMPILE)gcc CXX := $(CROSS_COMPILE)g++ ifeq ($(UNDER_CYGWIN),yes) WINDRES := $(CROSS_COMPILE)windres else WINDRES := windres endif # Get the default ARCH. ifndef ARCH ARCH := $(shell $(CC) -dumpmachine | sed -e 's/-.*//' -e 's/_/-/' -e 's/^mingw32$$/i686/') endif # Perl interface: # PERL=[Path to Perl directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_PERL=yes (to load the Perl DLL dynamically) # PERL_VER=[Perl version, eg 56, 58, 510] (default is 524) ifdef PERL ifndef PERL_VER PERL_VER=524 endif ifndef DYNAMIC_PERL DYNAMIC_PERL=yes endif # on Linux, for cross-compile, it's here: #PERLLIB=/home/ron/ActivePerl/lib # on NT, it's here: PERLEXE=$(PERL)/bin/perl PERLLIB=$(PERL)/lib PERLLIBS=$(PERLLIB)/Core ifeq ($(UNDER_CYGWIN),yes) PERLTYPEMAP:=$(shell cygpath -m $(PERLLIB)/ExtUtils/typemap) XSUBPPTRY:=$(shell cygpath -m $(PERLLIB)/ExtUtils/xsubpp) else PERLTYPEMAP=$(PERLLIB)/ExtUtils/typemap XSUBPPTRY=$(PERLLIB)/ExtUtils/xsubpp endif XSUBPP_EXISTS=$(shell $(PERLEXE) -e "print 1 unless -e '$(XSUBPPTRY)'") ifeq "$(XSUBPP_EXISTS)" "" XSUBPP=$(PERLEXE) $(XSUBPPTRY) else XSUBPP=xsubpp endif endif # Lua interface: # LUA=[Path to Lua directory] (Set inside Make_cyg.mak or Make_ming.mak) # LUA_LIBDIR=[Path to Lua library directory] (default: $LUA/lib) # LUA_INCDIR=[Path to Lua include directory] (default: $LUA/include) # DYNAMIC_LUA=yes (to load the Lua DLL dynamically) # LUA_VER=[Lua version, eg 51, 52] (default is 53) ifdef LUA ifndef DYNAMIC_LUA DYNAMIC_LUA=yes endif ifndef LUA_VER LUA_VER=53 endif ifeq (no,$(DYNAMIC_LUA)) LUA_LIBDIR = $(LUA)/lib LUA_LIB = -L$(LUA_LIBDIR) -llua endif endif # MzScheme interface: # MZSCHEME=[Path to MzScheme directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_MZSCHEME=yes (to load the MzScheme DLL dynamically) # MZSCHEME_VER=[MzScheme version] (default is 3m_a0solc (6.6)) # Used for the DLL file name. E.g.: # C:\Program Files (x86)\Racket\lib\libracket3m_XXXXXX.dll # MZSCHEME_DEBUG=no ifdef MZSCHEME ifndef DYNAMIC_MZSCHEME DYNAMIC_MZSCHEME=yes endif ifndef MZSCHEME_VER MZSCHEME_VER=3m_a0solc endif # for version 4.x we need to generate byte-code for Scheme base ifndef MZSCHEME_GENERATE_BASE MZSCHEME_GENERATE_BASE=no endif ifneq ($(wildcard $(MZSCHEME)/lib/msvc/libmzsch$(MZSCHEME_VER).lib),) MZSCHEME_MAIN_LIB=mzsch else MZSCHEME_MAIN_LIB=racket endif ifndef MZSCHEME_PRECISE_GC MZSCHEME_PRECISE_GC=no ifneq ($(wildcard $(MZSCHEME)\lib\lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).dll),) ifeq ($(wildcard $(MZSCHEME)\lib\libmzgc$(MZSCHEME_VER).dll),) MZSCHEME_PRECISE_GC=yes endif else ifneq ($(wildcard $(MZSCHEME)\lib\msvc\lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).lib),) ifeq ($(wildcard $(MZSCHEME)\lib\msvc\libmzgc$(MZSCHEME_VER).lib),) MZSCHEME_PRECISE_GC=yes endif endif endif endif ifeq (no,$(DYNAMIC_MZSCHEME)) ifeq (yes,$(MZSCHEME_PRECISE_GC)) MZSCHEME_LIB=-l$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER) else MZSCHEME_LIB=-l$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER) -lmzgc$(MZSCHEME_VER) endif # the modern MinGW can dynamically link to dlls directly. # point MZSCHEME_DLLS to where you put libmzschXXXXXXX.dll and libgcXXXXXXX.dll ifndef MZSCHEME_DLLS MZSCHEME_DLLS=$(MZSCHEME) endif MZSCHEME_LIBDIR=-L$(MZSCHEME_DLLS) -L$(MZSCHEME_DLLS)\lib endif endif # Python interface: # PYTHON=[Path to Python directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_PYTHON=yes (to load the Python DLL dynamically) # PYTHON_VER=[Python version, eg 22, 23, ..., 27] (default is 27) ifdef PYTHON ifndef DYNAMIC_PYTHON DYNAMIC_PYTHON=yes endif ifndef PYTHON_VER PYTHON_VER=27 endif ifndef DYNAMIC_PYTHON_DLL DYNAMIC_PYTHON_DLL=python$(PYTHON_VER).dll endif ifdef PYTHON_HOME PYTHON_HOME_DEF=-DPYTHON_HOME=\"$(PYTHON_HOME)\" endif ifeq (no,$(DYNAMIC_PYTHON)) PYTHONLIB=-L$(PYTHON)/libs -lpython$(PYTHON_VER) endif # my include files are in 'win32inc' on Linux, and 'include' in the standard # NT distro (ActiveState) ifndef PYTHONINC ifeq ($(CROSS),no) PYTHONINC=-I $(PYTHON)/include else PYTHONINC=-I $(PYTHON)/win32inc endif endif endif # Python3 interface: # PYTHON3=[Path to Python3 directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_PYTHON3=yes (to load the Python3 DLL dynamically) # PYTHON3_VER=[Python3 version, eg 31, 32] (default is 36) ifdef PYTHON3 ifndef DYNAMIC_PYTHON3 DYNAMIC_PYTHON3=yes endif ifndef PYTHON3_VER PYTHON3_VER=36 endif ifndef DYNAMIC_PYTHON3_DLL DYNAMIC_PYTHON3_DLL=python$(PYTHON3_VER).dll endif ifdef PYTHON3_HOME PYTHON3_HOME_DEF=-DPYTHON3_HOME=L\"$(PYTHON3_HOME)\" endif ifeq (no,$(DYNAMIC_PYTHON3)) PYTHON3LIB=-L$(PYTHON3)/libs -lpython$(PYTHON3_VER) endif ifndef PYTHON3INC ifeq ($(CROSS),no) PYTHON3INC=-I $(PYTHON3)/include else PYTHON3INC=-I $(PYTHON3)/win32inc endif endif endif # TCL interface: # TCL=[Path to TCL directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_TCL=yes (to load the TCL DLL dynamically) # TCL_VER=[TCL version, eg 83, 84] (default is 86) # TCL_VER_LONG=[Tcl version, eg 8.3] (default is 8.6) # You must set TCL_VER_LONG when you set TCL_VER. # TCL_DLL=[TCL dll name, eg tcl86.dll] (default is tcl86.dll) ifdef TCL ifndef DYNAMIC_TCL DYNAMIC_TCL=yes endif ifndef TCL_VER TCL_VER = 86 endif ifndef TCL_VER_LONG TCL_VER_LONG = 8.6 endif ifndef TCL_DLL TCL_DLL = tcl$(TCL_VER).dll endif TCLINC += -I$(TCL)/include endif # Ruby interface: # RUBY=[Path to Ruby directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_RUBY=yes (to load the Ruby DLL dynamically, "no" for static) # RUBY_VER=[Ruby version, eg 19, 22] (default is 22) # RUBY_API_VER_LONG=[Ruby API version, eg 1.8, 1.9.1, 2.2.0] # (default is 2.2.0) # You must set RUBY_API_VER_LONG when changing RUBY_VER. # Note: If you use Ruby 1.9.3, set as follows: # RUBY_VER=19 # RUBY_API_VER_LONG=1.9.1 (not 1.9.3, because the API version is 1.9.1.) ifdef RUBY ifndef DYNAMIC_RUBY DYNAMIC_RUBY=yes endif # Set default value ifndef RUBY_VER RUBY_VER = 22 endif ifndef RUBY_VER_LONG RUBY_VER_LONG = 2.2.0 endif ifndef RUBY_API_VER_LONG RUBY_API_VER_LONG = $(RUBY_VER_LONG) endif ifndef RUBY_API_VER RUBY_API_VER = $(subst .,,$(RUBY_API_VER_LONG)) endif ifndef RUBY_PLATFORM ifeq ($(RUBY_VER), 16) RUBY_PLATFORM = i586-mswin32 else ifneq ($(wildcard $(RUBY)/lib/ruby/$(RUBY_API_VER_LONG)/i386-mingw32),) RUBY_PLATFORM = i386-mingw32 else ifneq ($(wildcard $(RUBY)/lib/ruby/$(RUBY_API_VER_LONG)/x64-mingw32),) RUBY_PLATFORM = x64-mingw32 else ifneq ($(wildcard $(RUBY)/lib/ruby/$(RUBY_API_VER_LONG)/x64-mingw-ucrt),) RUBY_PLATFORM = x64-mingw-ucrt else RUBY_PLATFORM = i386-mswin32 endif endif ifndef RUBY_INSTALL_NAME ifeq ($(RUBY_VER), 16) RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_API_VER) else ifndef RUBY_MSVCRT_NAME # Base name of msvcrXX.dll which is used by ruby's dll. RUBY_MSVCRT_NAME = msvcrt endif ifeq ($(RUBY_PLATFORM),x64-mingw-ucrt) RUBY_INSTALL_NAME = x64-ucrt-ruby$(RUBY_API_VER) else ifeq ($(ARCH),x86-64) RUBY_INSTALL_NAME = x64-$(RUBY_MSVCRT_NAME)-ruby$(RUBY_API_VER) else RUBY_INSTALL_NAME = $(RUBY_MSVCRT_NAME)-ruby$(RUBY_API_VER) endif endif endif ifeq (19, $(word 1,$(sort 19 $(RUBY_VER)))) RUBY_19_OR_LATER = 1 endif ifdef RUBY_19_OR_LATER RUBYINC = -I $(RUBY)/include/ruby-$(RUBY_API_VER_LONG) -I $(RUBY)/include/ruby-$(RUBY_API_VER_LONG)/$(RUBY_PLATFORM) else RUBYINC = -I $(RUBY)/lib/ruby/$(RUBY_API_VER_LONG)/$(RUBY_PLATFORM) endif ifeq (no, $(DYNAMIC_RUBY)) RUBYLIB = -L$(RUBY)/lib -l$(RUBY_INSTALL_NAME) endif endif # RUBY # See feature.h for a list of options. # Any other defines can be included here. DEF_GUI=-DFEAT_GUI_MSWIN -DFEAT_CLIPBOARD DEFINES=-DWIN32 -DWINVER=$(WINVER) -D_WIN32_WINNT=$(WINVER) \ -DHAVE_PATHDEF -DFEAT_$(FEATURES) -DHAVE_STDINT_H ifeq ($(ARCH),x86-64) DEFINES+=-DMS_WIN64 endif #>>>>> end of choices ########################################################################### CFLAGS = -I. -Iproto $(DEFINES) -pipe -march=$(ARCH) -Wall CXXFLAGS = -std=gnu++11 # This used to have --preprocessor, but it's no longer supported WINDRES_FLAGS = EXTRA_LIBS = ifdef GETTEXT DEFINES += -DHAVE_GETTEXT -DHAVE_LOCALE_H GETTEXTINCLUDE = $(GETTEXT)/include GETTEXTLIB = $(INTLPATH) ifeq (yes, $(GETTEXT)) DEFINES += -DDYNAMIC_GETTEXT else ifdef DYNAMIC_GETTEXT DEFINES += -D$(DYNAMIC_GETTEXT) ifdef GETTEXT_DYNAMIC DEFINES += -DGETTEXT_DYNAMIC -DGETTEXT_DLL=\"$(GETTEXT_DYNAMIC)\" endif endif endif ifdef PERL CFLAGS += -I$(PERLLIBS) -DFEAT_PERL -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS ifeq (yes, $(DYNAMIC_PERL)) CFLAGS += -DDYNAMIC_PERL -DDYNAMIC_PERL_DLL=\"perl$(PERL_VER).dll\" EXTRA_LIBS += -L$(PERLLIBS) -lperl$(PERL_VER) endif endif ifdef LUA LUA_INCDIR = $(LUA)/include CFLAGS += -I$(LUA_INCDIR) -I$(LUA) -DFEAT_LUA ifeq (yes, $(DYNAMIC_LUA)) CFLAGS += -DDYNAMIC_LUA -DDYNAMIC_LUA_DLL=\"lua$(LUA_VER).dll\" endif endif ifdef MZSCHEME ifndef MZSCHEME_COLLECTS MZSCHEME_COLLECTS=$(MZSCHEME)/collects ifeq (yes, $(UNDER_CYGWIN)) MZSCHEME_COLLECTS:=$(shell cygpath -m $(MZSCHEME_COLLECTS) | sed -e 's/ /\\ /g') endif endif CFLAGS += -I$(MZSCHEME)/include -DFEAT_MZSCHEME -DMZSCHEME_COLLECTS=\"$(MZSCHEME_COLLECTS)\" ifeq (yes, $(DYNAMIC_MZSCHEME)) ifeq (yes, $(MZSCHEME_PRECISE_GC)) # Precise GC does not use separate dll CFLAGS += -DDYNAMIC_MZSCHEME -DDYNAMIC_MZSCH_DLL=\"lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).dll\" -DDYNAMIC_MZGC_DLL=\"lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).dll\" else CFLAGS += -DDYNAMIC_MZSCHEME -DDYNAMIC_MZSCH_DLL=\"lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).dll\" -DDYNAMIC_MZGC_DLL=\"libmzgc$(MZSCHEME_VER).dll\" endif endif ifeq (yes, "$(MZSCHEME_DEBUG)") CFLAGS += -DMZSCHEME_FORCE_GC endif endif ifdef RUBY CFLAGS += -DFEAT_RUBY $(RUBYINC) ifeq (yes, $(DYNAMIC_RUBY)) CFLAGS += -DDYNAMIC_RUBY -DDYNAMIC_RUBY_DLL=\"$(RUBY_INSTALL_NAME).dll\" endif CFLAGS += -DRUBY_VERSION=$(RUBY_VER) ifneq ($(findstring w64-mingw32,$(CC)),) # A workaround for MinGW-w64 CFLAGS += -DHAVE_STRUCT_TIMESPEC -DHAVE_STRUCT_TIMEZONE endif endif ifdef PYTHON CFLAGS += -DFEAT_PYTHON ifeq (yes, $(DYNAMIC_PYTHON)) CFLAGS += -DDYNAMIC_PYTHON -DDYNAMIC_PYTHON_DLL=\"$(DYNAMIC_PYTHON_DLL)\" endif endif ifdef PYTHON3 CFLAGS += -DFEAT_PYTHON3 ifeq (yes, $(DYNAMIC_PYTHON3)) CFLAGS += -DDYNAMIC_PYTHON3 -DDYNAMIC_PYTHON3_DLL=\"$(DYNAMIC_PYTHON3_DLL)\" else CFLAGS += -DPYTHON3_DLL=\"$(DYNAMIC_PYTHON3_DLL)\" endif endif ifdef TCL CFLAGS += -DFEAT_TCL $(TCLINC) ifeq (yes, $(DYNAMIC_TCL)) CFLAGS += -DDYNAMIC_TCL -DDYNAMIC_TCL_DLL=\"$(TCL_DLL)\" -DDYNAMIC_TCL_VER=\"$(TCL_VER_LONG)\" endif endif ifeq ($(POSTSCRIPT),yes) DEFINES += -DMSWINPS endif ifeq (yes, $(OLE)) DEFINES += -DFEAT_OLE endif ifeq ($(CSCOPE),yes) DEFINES += -DFEAT_CSCOPE endif ifeq ($(NETBEANS),yes) # Only allow NETBEANS for a GUI build. ifeq (yes, $(GUI)) DEFINES += -DFEAT_NETBEANS_INTG ifeq ($(NBDEBUG), yes) DEFINES += -DNBDEBUG NBDEBUG_INCL = nbdebug.h NBDEBUG_SRC = nbdebug.c endif endif endif ifeq ($(CHANNEL),yes) DEFINES += -DFEAT_JOB_CHANNEL -DFEAT_IPV6 ifeq ($(shell expr "$$(($(WINVER)))" \>= "$$((0x600))"),1) DEFINES += -DHAVE_INET_NTOP endif endif ifeq ($(TERMINAL),yes) DEFINES += -DFEAT_TERMINAL TERM_DEPS = \ libvterm/include/vterm.h \ libvterm/include/vterm_keycodes.h \ libvterm/src/rect.h \ libvterm/src/utf8.h \ libvterm/src/vterm_internal.h endif ifeq ($(SOUND),yes) DEFINES += -DFEAT_SOUND endif # DirectWrite (DirectX) ifeq ($(DIRECTX),yes) # Only allow DirectWrite for a GUI build. ifeq (yes, $(GUI)) DEFINES += -DFEAT_DIRECTX -DDYNAMIC_DIRECTX ifneq ($(COLOR_EMOJI),no) DEFINES += -DFEAT_DIRECTX_COLOR_EMOJI endif endif endif ifdef SODIUM DEFINES += -DHAVE_SODIUM ifeq ($(SODIUM),yes) SODIUM_DLL = libsodium-23.dll else SODIUM_DLL = libsodium.dll CFLAGS += -I $(SODIUM)/include endif ifndef DYNAMIC_SODIUM DYNAMIC_SODIUM=yes endif ifeq ($(DYNAMIC_SODIUM),yes) DEFINES += -DDYNAMIC_SODIUM -DDYNAMIC_SODIUM_DLL=\"$(SODIUM_DLL)\" else SODIUMLIB = -lsodium endif endif # Only allow XPM for a GUI build. ifeq (yes, $(GUI)) ifndef XPM ifeq ($(ARCH),i386) XPM = xpm/x86 endif ifeq ($(ARCH),i486) XPM = xpm/x86 endif ifeq ($(ARCH),i586) XPM = xpm/x86 endif ifeq ($(ARCH),i686) XPM = xpm/x86 endif ifeq ($(ARCH),x86-64) XPM = xpm/x64 endif endif ifdef XPM ifneq ($(XPM),no) CFLAGS += -DFEAT_XPM_W32 -I $(XPM)/include -I $(XPM)/../include endif endif endif ifeq ($(DEBUG),yes) CFLAGS += -g -fstack-check DEBUG_SUFFIX=d else ifeq ($(OPTIMIZE), SIZE) CFLAGS += -Os else ifeq ($(OPTIMIZE), MAXSPEED) CFLAGS += -O3 CFLAGS += -fomit-frame-pointer -freg-struct-return else # SPEED CFLAGS += -O2 endif LFLAGS += -s endif ifeq ($(COVERAGE),yes) CFLAGS += --coverage LFLAGS += --coverage endif LIB = -lkernel32 -luser32 -lgdi32 -ladvapi32 -lcomdlg32 -lcomctl32 -lnetapi32 -lversion GUIOBJ = $(OUTDIR)/gui.o $(OUTDIR)/gui_w32.o $(OUTDIR)/gui_beval.o CUIOBJ = $(OUTDIR)/iscygpty.o OBJ = \ $(OUTDIR)/alloc.o \ $(OUTDIR)/arabic.o \ $(OUTDIR)/arglist.o \ $(OUTDIR)/autocmd.o \ $(OUTDIR)/beval.o \ $(OUTDIR)/blob.o \ $(OUTDIR)/blowfish.o \ $(OUTDIR)/buffer.o \ $(OUTDIR)/bufwrite.o \ $(OUTDIR)/change.o \ $(OUTDIR)/charset.o \ $(OUTDIR)/cindent.o \ $(OUTDIR)/clientserver.o \ $(OUTDIR)/clipboard.o \ $(OUTDIR)/cmdexpand.o \ $(OUTDIR)/cmdhist.o \ $(OUTDIR)/crypt.o \ $(OUTDIR)/crypt_zip.o \ $(OUTDIR)/debugger.o \ $(OUTDIR)/dict.o \ $(OUTDIR)/diff.o \ $(OUTDIR)/digraph.o \ $(OUTDIR)/drawline.o \ $(OUTDIR)/drawscreen.o \ $(OUTDIR)/edit.o \ $(OUTDIR)/eval.o \ $(OUTDIR)/evalbuffer.o \ $(OUTDIR)/evalfunc.o \ $(OUTDIR)/evalvars.o \ $(OUTDIR)/evalwindow.o \ $(OUTDIR)/ex_cmds.o \ $(OUTDIR)/ex_cmds2.o \ $(OUTDIR)/ex_docmd.o \ $(OUTDIR)/ex_eval.o \ $(OUTDIR)/ex_getln.o \ $(OUTDIR)/fileio.o \ $(OUTDIR)/filepath.o \ $(OUTDIR)/findfile.o \ $(OUTDIR)/float.o \ $(OUTDIR)/fold.o \ $(OUTDIR)/getchar.o \ $(OUTDIR)/gui_xim.o \ $(OUTDIR)/hardcopy.o \ $(OUTDIR)/hashtab.o \ $(OUTDIR)/help.o \ $(OUTDIR)/highlight.o \ $(OUTDIR)/if_cscope.o \ $(OUTDIR)/indent.o \ $(OUTDIR)/insexpand.o \ $(OUTDIR)/json.o \ $(OUTDIR)/list.o \ $(OUTDIR)/locale.o \ $(OUTDIR)/main.o \ $(OUTDIR)/map.o \ $(OUTDIR)/mark.o \ $(OUTDIR)/match.o \ $(OUTDIR)/memfile.o \ $(OUTDIR)/memline.o \ $(OUTDIR)/menu.o \ $(OUTDIR)/message.o \ $(OUTDIR)/misc1.o \ $(OUTDIR)/misc2.o \ $(OUTDIR)/mouse.o \ $(OU
/*
 *	The firmware this driver downloads into the Localtalk card is a
 *	separate program and is not GPL'd source code, even though the Linux
 *	side driver and the routine that loads this data into the card are.
 *	
 *	It is taken from the COPS SDK and is under the following license
 *
 *	This material is licensed to you strictly for use in conjunction with
 *	the use of COPS LocalTalk adapters.
 *	There is no charge for this SDK. And no waranty express or implied
 *	about its fitness for any purpose. However, we will cheerefully
 *	refund every penny you paid for this SDK...
 *	Regards,
 *
 *	Thomas F. Divine
 *	Chief Scientist
 */


/*      cops_ffdrv.h: LocalTalk driver firmware dump for Linux.
 *
 *      Authors:
 *      - Jay Schulist <jschlst@samba.org>
 */


#ifdef CONFIG_COPS_DAYNA

static const unsigned char ffdrv_code[] = {
	58,3,0,50,228,149,33,255,255,34,226,149,
	249,17,40,152,33,202,154,183,237,82,77,68,
	11,107,98,19,54,0,237,176,175,50,80,0,
	62,128,237,71,62,32,237,57,51,62,12,237,
	57,50,237,57,54,62,6,237,57,52,62,12,
	237,57,49,33,107,137,34,32,128,33,83,130,
	34,40,128,33,86,130,34,42,128,33,112,130,
	34,36,128,33,211,130,34,38,128,62,0,237,
	57,16,33,63,148,34,34,128,237,94,205,15,
	130,251,205,168,145,24,141,67,111,112,121,114,
	105,103,104,116,32,40,67,41,32,49,57,56,
	56,32,45,32,68,97,121,110,97,32,67,111,
	109,109,117,110,105,99,97,116,