/*
*
* Bluetooth HCI UART driver for Broadcom devices
*
* Copyright (C) 2015 Intel Corporation
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/of.h>
#include <linux/property.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/tty.h>
#include <linux/interrupt.h>
#include <linux/dmi.h>
#include <linux/pm_runtime.h>
#include <linux/serdev.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "btbcm.h"
#include "hci_uart.h"
#define BCM_NULL_PKT 0x00
#define BCM_NULL_SIZE 0
#define BCM_LM_DIAG_PKT 0x07
#define BCM_LM_DIAG_SIZE 63
#define BCM_AUTOSUSPEND_DELAY 5000 /* default autosleep delay */
/* device driver resources */
struct bcm_device {
/* Must be the first member, hci_serdev.c expects this. */
struct hci_uart serdev_hu;
struct list_head list;
struct device *dev;
const char *name;
struct gpio_desc *device_wakeup;
struct gpio_desc *shutdown;
struct clk *clk;
bool clk_enabled;
u32 init_speed;
u32 oper_speed;
int irq;
bool irq_active_low;
#ifdef CONFIG_PM
struct hci_uart *hu;
bool is_suspended; /* suspend/resume flag */
#endif
};
/* generic bcm uart resources */
struct bcm_data {
struct sk_buff *rx_skb;
struct sk_buff_head txq;
struct bcm_device *dev;
};
/* List of BCM BT UART devices */
static DEFINE_MUTEX(bcm_device_lock);
static LIST_HEAD(bcm_device_list);
static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
{
if (hu->serdev)
serdev_device_set_baudrate(hu->serdev, speed);
else
hci_uart_set_baudrate(hu, speed);
}
static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
{
struct hci_dev *hdev = hu->hdev;
struct sk_buff *skb;
struct bcm_update_uart_baud_rate param;
if (speed > 3000000) {
struct bcm_write_uart_clock_setting clock;
clock.type = BCM_UART_CLOCK_48MHZ;
bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type);
/* This Broadcom specific command changes the UART's controller
* clock for baud rate > 3000000.
*/
skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: failed to write clock (%d)",
err);
return err;
}
kfree_skb(skb);
}
bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed);
param.zero = cpu_to_le16(0);
param.baud_rate = cpu_to_le32(speed);
/* This Broadcom specific command changes the UART's controller baud
* rate.
*/
skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), ¶m,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)",
err);
return err;
}
kfree_skb(skb);
return 0;
}
/* bcm_device_exists should be protected by bcm_device_lock */
static bool bcm_device_exists(struct bcm_device *device)
{
struct list_head *p;
#ifdef CONFIG_PM
/* Devices using serdev always exist */
if (device && device->hu && device->hu->serdev)
return true;
#endif
list_for_each(p, &bcm_device_list) {
struct bcm_device *dev = list_entry(p, struct bcm_device, list);
if (device == dev)
return true;
}
return false;
}
static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
{
if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled)
clk_prepare_enable(dev->clk);
gpiod_set_value(dev->shutdown, powered