#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # # A test for strict prioritization of traffic in the switch. Run two streams of # traffic, each through a different ingress port, one tagged with PCP of 1, the # other with PCP of 2. Both streams converge at one egress port, where they are # assigned TC of, respectively, 1 and 2, with strict priority configured between # them. In H3, we expect to see (almost) exclusively the high-priority traffic. # # Please see qos_mc_aware.sh for an explanation of why we use mausezahn and # counters instead of just running iperf3. # # +---------------------------+ +-----------------------------+ # | H1 | | H2 | # | $h1.111 + | | + $h2.222 | # | 192.0.2.33/28 | | | | 192.0.2.65/28 | # | e-qos-map 0:1 | | | | e-qos-map 0:2 | # | | | | | | # | $h1 + | | + $h2 | # +-----------------|---------+ +---------|-------------------+ # | | # +-----------------|-------------------------------------|-------------------+ # | $swp1 + + $swp2 | # | >1Gbps | | >1Gbps | # | +---------------|-----------+ +----------|----------------+ | # | | $swp1.111 + | | + $swp2.222 | | # | | BR111 | SW | BR222 | | # | | $swp3.111 + | | + $swp3.222 | | # | +---------------|-----------+ +----------|----------------+ | # | \_____________________________________/ | # | | | # | + $swp3 | # | | 1Gbps bottleneck | # | | ETS: (up n->tc n for n in 0..7) | # | | strict priority | # +------------------------------------|--------------------------------------+ # | # +--------------------|--------------------+ # | + $h3 H3 | # | / \ | # | / \ | # | $h3.111 + + $h3.222 | # | 192.0.2.34/28 192.0.2.66/28 | # +-----------------------------------------+ ALL_TESTS=" ping_ipv4 test_ets_strict " lib_dir=$(dirname $0)/../../../net/forwarding NUM_NETIFS=6 source $lib_dir/lib.sh source $lib_dir/devlink_lib.sh source qos_lib.sh h1_create() { simple_if_init $h1 mtu_set $h1 10000 vlan_create $h1 111 v$h1 192.0.2.33/28 ip link set dev $h1.111 type vlan egress-qos-map 0:1 } h1_destroy() { vlan_destroy $h1 111 mtu_restore $h1 simple_if_fini $h1 } h2_create() { simple_if_init $h2 mtu_set $h2 10000 vlan_create $h2 222 v$h2 192.0.2.65/28 ip link set dev $h2.222 type vlan egress-qos-map 0:2 } h2_destroy() { vlan_destroy $h2 222 mtu_restore $h2 simple_if_fini $h2 } h3_create() { simple_if_init $h3 mtu_set $h3 10000 vlan_create $h3 111 v$h3 192.0.2.34/28 vlan_create $h3 222 v$h3 192.0.2.66/28 } h3_destroy() { vlan_destroy $h3 222 vlan_destroy $h3 111 mtu_restore $h3 simple_if_fini $h3 } switch_create() { ip link set dev $swp1 up mtu_set $swp1 10000 ip link set dev $swp2 up mtu_set $swp2 10000 # prio n -> TC n, strict scheduling lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:1,2:2,3:3,4:4,5:5,6:6,7:7 lldptool -T -i $swp3 -V ETS-CFG tsa=$( )"0:strict,"$( )"1:strict,"$( )"2:strict,"$( )"3:strict,"$( )"4:strict,"$( )"5:strict,"$( )"6:strict,"$( )"7:strict" sleep 1 ip link set dev $swp3 up mtu_set $swp3 10000 ethtool -s $swp3 speed 1000 autoneg off vlan_create $swp1 111 vlan_create $swp2 222 vlan_create $swp3 111 vlan_create $swp3 222 ip link add name br111 up type bridge vlan_filtering 0 ip link set dev $swp1.111 master br111 ip link set dev $swp3.111 master br111 ip link add name br222 up type bridge vlan_filtering 0 ip link set dev $swp2.222 master br222 ip link set dev $swp3.222 master br222 # Make sure that ingress quotas are smaller than egress so that there is # room for both streams of traffic to be admitted to shared buffer. devlink_pool_size_thtype_save 0 devlink_pool_size_thtype_set 0 dynamic 10000000 devlink_pool_size_thtype_save 4 devlink_pool_size_thtype_set 4 dynamic 10000000 devlink_port_pool_th_save $swp1 0 devlink_port_pool_th_set $swp1 0 6 devlink_tc_bind_pool_th_save $swp1 1 ingress devlink_tc_bind_pool_th_set $swp1 1 ingress 0 6 devlink_port_pool_th_save $swp2 0 devlink_port_pool_th_set $swp2 0 6 devlink_tc_bind_pool_th_save $swp2 2 ingress devlink_tc_bind_pool_th_set $swp2 2 ingress 0 6 devlink_tc_bind_pool_th_save $swp3 1 egress devlink_tc_bind_pool_th_set $swp3 1 egress 4 7 devlink_tc_bind_pool_th_save $swp3 2 egress devlink_tc_bind_pool_th_set $swp3 2 egress 4 7 devlink_port_pool_th_save $swp3 4 devlink_port_pool_th_set $swp3 4 7 } switch_destroy() { devlink_port_pool_th_restore $swp3 4 devlink_tc_bind_pool_th_restore $swp3 2 egress devlink_tc_bind_pool_th_restore $swp3 1 egress devlink_tc_bind_pool_th_restore $swp2 2 ingress devlink_port_pool_th_restore $swp2 0 devlink_tc_bind_pool_th_restore $swp1 1 ingress devlink_port_pool_th_restore $swp1 0 devlink_pool_size_thtype_restore 4 devlink_pool_size_thtype_restore 0 ip link del dev br222 ip link del dev br111 vlan_destroy $swp3 222 vlan_destroy $swp3 111 vlan_destroy $swp2 222 vlan_destroy $swp1 111 ethtool -s $swp3 autoneg on mtu_restore $swp3 ip link set dev $swp3 down lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:0,2:0,3:0,4:0,5:0,6:0,7:0 mtu_restore $swp2 ip link set dev $swp2 down mtu_restore $swp1 ip link set dev $swp1 down } setup_prepare() { h1=${NETIFS[p1]} swp1=${NETIFS[p2]} swp2=${NETIFS[p3]} h2=${NETIFS[p4]} swp3=${NETIFS[p5]} h3=${NETIFS[p6]} h3mac=$(mac_get $h3) vrf_prepare h1_create h2_create h3_create switch_create } cleanup() { pre_cleanup switch_destroy h3_destroy h2_destroy h1_destroy vrf_cleanup } ping_ipv4() { ping_test $h1 192.0.2.34 " from H1" ping_test $h2 192.0.2.66 " from H2" } rel() { local old=$1; shift local new=$1; shift bc <<< " scale=2 ret = 100 * $new / $old if (ret > 0) { ret } else { 0 } " } test_ets_strict() { RET=0 # Run high-prio traffic on its own. start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac local -a rate_2 rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2")) check_err $? "Could not get high enough prio-2 ingress rate" local rate_2_in=${rate_2[0]} local rate_2_eg=${rate_2[1]} stop_traffic # $h2.222 # Start low-prio stream. start_traffic $h1.111 192.0.2.33 192.0.2.34 $h3mac local -a rate_1 rate_1=($(measure_rate $swp1 $h3 rx_octets_prio_1 "prio 1")) check_err $? "Could not get high enough prio-1 ingress rate" local rate_1_in=${rate_1[0]} local rate_1_eg=${rate_1[1]} # High-prio and low-prio on their own should have about the same # throughput. local rel21=$(rel $rate_1_eg $rate_2_eg) check_err $(bc <<< "$rel21 < 95") check_err $(bc <<< "$rel21 > 105") # Start the high-prio stream--now both streams run. start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac rate_3=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2 w/ 1")) check_err $? "Could not get high enough prio-2 ingress rate with prio-1" local rate_3_in=${rate_3[0]} local rate_3_eg=${rate_3[1]} stop_traffic # $h2.222 stop_traffic # $h1.111 # High-prio should have about the same throughput whether or not # low-prio is in the system. local rel32=$(rel $rate_2_eg $rate_3_eg) check_err $(bc <<< "$rel32 < 95") log_test "strict priority" echo "Ingress to switch:" echo " p1 in rate $(humanize $rate_1_in)" echo " p2 in rate $(humanize $rate_2_in)" echo " p2 in rate w/ p1 $(humanize $rate_3_in)" echo "Egress from switch:" echo " p1 eg rate $(humanize $rate_1_eg)" echo " p2 eg rate $(humanize $rate_2_eg) ($rel21% of p1)" echo " p2 eg rate w/ p1 $(humanize $rate_3_eg) ($rel32% of p2)" } trap cleanup EXIT setup_prepare setup_wait tests_run exit $EXIT_STATUS