From a4d8f64f7267a88d4688f5c216926f5f6cafbae6 Mon Sep 17 00:00:00 2001 From: Leilk Liu Date: Wed, 31 Oct 2018 16:49:16 +0800 Subject: spi: mediatek: use correct mata->xfer_len when in fifo transfer when xfer_len is greater than 64 bytes and use fifo mode to transfer, the actual length from the third time is mata->xfer_len but not len in mtk_spi_interrupt(). Signed-off-by: Leilk Liu Signed-off-by: Mark Brown --- drivers/spi/spi-mt65xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 3dc31627c655..0c2867deb36f 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -522,11 +522,11 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id) mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len); mtk_spi_setup_packet(master); - cnt = len / 4; + cnt = mdata->xfer_len / 4; iowrite32_rep(mdata->base + SPI_TX_DATA_REG, trans->tx_buf + mdata->num_xfered, cnt); - remainder = len % 4; + remainder = mdata->xfer_len % 4; if (remainder > 0) { reg_val = 0; memcpy(®_val, -- cgit v1.2.3 From e82e62e390d39c3819641cd721695702180d54fb Mon Sep 17 00:00:00 2001 From: Sebastian Parschauer Date: Wed, 7 Nov 2018 13:36:40 +0100 Subject: HID: Add quirk for Microsoft PIXART OEM mouse The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. References: https://www.spinics.net/lists/linux-usb/msg88965.html http://linet.gr.jp/~kojima/PlamoWeb/ML/htdocs/201808/msg00019.html Signed-off-by: Sebastian Parschauer CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index c0d668944dbe..02ce75f5ea4e 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -805,6 +805,7 @@ #define USB_DEVICE_ID_MS_TYPE_COVER_2 0x07a9 #define USB_DEVICE_ID_MS_POWER_COVER 0x07da #define USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER 0x02fd +#define USB_DEVICE_ID_MS_PIXART_MOUSE 0x00cb #define USB_VENDOR_ID_MOJO 0x8282 #define USB_DEVICE_ID_RETRO_ADAPTER 0x3201 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 8237dd86fb17..d82e5ab48837 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -107,6 +107,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C05A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C06A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_MCS, USB_DEVICE_ID_MCS_GAMEPADBLOCK), HID_QUIRK_MULTI_INPUT }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PIXART_MOUSE), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE_PRO_2), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2), HID_QUIRK_NO_INIT_REPORTS }, -- cgit v1.2.3 From 0fd791841a6d67af1155a9c3de54dea51220721e Mon Sep 17 00:00:00 2001 From: Benson Leung Date: Thu, 8 Nov 2018 15:59:21 -0800 Subject: HID: input: Ignore battery reported by Symbol DS4308 The Motorola/Zebra Symbol DS4308-HD is a handheld USB barcode scanner which does not have a battery, but reports one anyway that always has capacity 2. Let's apply the IGNORE quirk to prevent it from being treated like a power supply so that userspaces don't get confused that this accessory is almost out of power and warn the user that they need to charge their wired barcode scanner. Reported here: https://bugs.chromium.org/p/chromium/issues/detail?id=804720 Signed-off-by: Benson Leung Reviewed-by: Benjamin Tissoires Signed-off-by: Benjamin Tissoires --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-input.c | 3 +++ 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 02ce75f5ea4e..3004322eb8e4 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1044,6 +1044,7 @@ #define USB_VENDOR_ID_SYMBOL 0x05e0 #define USB_DEVICE_ID_SYMBOL_SCANNER_1 0x0800 #define USB_DEVICE_ID_SYMBOL_SCANNER_2 0x1300 +#define USB_DEVICE_ID_SYMBOL_SCANNER_3 0x1200 #define USB_VENDOR_ID_SYNAPTICS 0x06cb #define USB_DEVICE_ID_SYNAPTICS_TP 0x0001 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index a2f74e6adc70..44ea8e7c71a9 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -325,6 +325,9 @@ static const struct hid_device_id hid_battery_quirks[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084), HID_BATTERY_QUIRK_IGNORE }, + { HID_USB_DEVICE(USB_VENDOR_ID_SYMBOL, + USB_DEVICE_ID_SYMBOL_SCANNER_3), + HID_BATTERY_QUIRK_IGNORE }, {} }; -- cgit v1.2.3 From 70df9ebbd82c794ddfbb49d45b337f18d5588dc2 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Fri, 9 Nov 2018 16:42:14 -0800 Subject: hwmon (ina2xx) Fix NULL id pointer in probe() When using DT configurations, the id pointer might turn out to be NULL. Then the driver encounters NULL pointer access: Unable to handle kernel read from unreadable memory at vaddr 00000018 [...] PC is at ina2xx_probe+0x114/0x200 LR is at ina2xx_probe+0x10c/0x200 [...] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b The reason is that i2c core returns the id pointer by matching id_table with client->name, while the client->name is actually using the name from the first string in the DT compatible list, not the best one. So i2c core would fail to match the id_table if the best matched compatible string isn't the first one, and then would return a NULL id pointer. This probably should be fixed in i2c core. But it doesn't hurt to make the driver robust. So this patch fixes it by using the "chip" that's added to unify both DT and non-DT configurations. Additionally, since id pointer could be null, so as id->name: ina2xx 10-0047: power monitor (null) (Rshunt = 1000 uOhm) ina2xx 10-0048: power monitor (null) (Rshunt = 10000 uOhm) So this patch also fixes NULL name pointer, using client->name to play safe and to align with hwmon->name. Fixes: bd0ddd4d0883 ("hwmon: (ina2xx) Add OF device ID table") Signed-off-by: Nicolin Chen Signed-off-by: Guenter Roeck --- drivers/hwmon/ina2xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index 71d3445ba869..c2252cf452f5 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -491,7 +491,7 @@ static int ina2xx_probe(struct i2c_client *client, } data->groups[group++] = &ina2xx_group; - if (id->driver_data == ina226) + if (chip == ina226) data->groups[group++] = &ina226_group; hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, @@ -500,7 +500,7 @@ static int ina2xx_probe(struct i2c_client *client, return PTR_ERR(hwmon_dev); dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n", - id->name, data->rshunt); + client->name, data->rshunt); return 0; } -- cgit v1.2.3 From 35fdc3902179366489a12cae4cb3ccc3b95f0afe Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 11 Nov 2018 13:01:11 +0100 Subject: hwmon: (raspberrypi) Fix initial notify MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In case an under-voltage happens before probing the driver wont write the critical warning into the kernel log. So don't init of last_throttled during probe and fix this issue. Fixes: 74d1e007915f ("hwmon: Add support for RPi voltage sensor") Reported-by: "Noralf Trønnes" Signed-off-by: Stefan Wahren Signed-off-by: Guenter Roeck --- drivers/hwmon/raspberrypi-hwmon.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c index be5ba4690895..0d0457245e7d 100644 --- a/drivers/hwmon/raspberrypi-hwmon.c +++ b/drivers/hwmon/raspberrypi-hwmon.c @@ -115,7 +115,6 @@ static int rpi_hwmon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct rpi_hwmon_data *data; - int ret; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -124,11 +123,6 @@ static int rpi_hwmon_probe(struct platform_device *pdev) /* Parent driver assure that firmware is correct */ data->fw = dev_get_drvdata(dev->parent); - /* Init throttled */ - ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED, - &data->last_throttled, - sizeof(data->last_throttled)); - data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt", data, &rpi_chip_info, -- cgit v1.2.3 From 38cd989ee38c16388cde89db5b734f9d55b905f9 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Tue, 13 Nov 2018 19:48:54 -0800 Subject: hwmon: (ina2xx) Fix current value calculation The current register (04h) has a sign bit at MSB. The comments for this calculation also mention that it's a signed register. However, the regval is unsigned type so result of calculation turns out to be an incorrect value when current is negative. This patch simply fixes this by adding a casting to s16. Fixes: 5d389b125186c ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Nicolin Chen Signed-off-by: Guenter Roeck --- drivers/hwmon/ina2xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index c2252cf452f5..07ee19573b3f 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -274,7 +274,7 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg, break; case INA2XX_CURRENT: /* signed register, result in mA */ - val = regval * data->current_lsb_uA; + val = (s16)regval * data->current_lsb_uA; val = DIV_ROUND_CLOSEST(val, 1000); break; case INA2XX_CALIBRATION: -- cgit v1.2.3 From 91b9deefedf4c35a01027ce38bed7299605026a3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 15 Nov 2018 15:59:39 -0800 Subject: spi: omap2-mcspi: Add missing suspend and resume calls I've been wondering still about omap2-mcspi related suspend and resume flakeyness and looks like we're missing calls to spi_master_suspend() and spi_master_resume(). Adding those and using pm_runtime_force_suspend() and pm_runtime_force_resume() makes things work for suspend and resume and allows us to stop using noirq suspend and resume. And while at it, let's use SET_SYSTEM_SLEEP_PM_OPS to simplify things further. Signed-off-by: Tony Lindgren Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 37 +++++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index f024c3fc3679..2fd8881fcd65 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1540,13 +1540,26 @@ static int omap2_mcspi_remove(struct platform_device *pdev) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:omap2_mcspi"); -#ifdef CONFIG_SUSPEND -static int omap2_mcspi_suspend_noirq(struct device *dev) +static int __maybe_unused omap2_mcspi_suspend(struct device *dev) { - return pinctrl_pm_select_sleep_state(dev); + struct spi_master *master = dev_get_drvdata(dev); + struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + int error; + + error = pinctrl_pm_select_sleep_state(dev); + if (error) + dev_warn(mcspi->dev, "%s: failed to set pins: %i\n", + __func__, error); + + error = spi_master_suspend(master); + if (error) + dev_warn(mcspi->dev, "%s: master suspend failed: %i\n", + __func__, error); + + return pm_runtime_force_suspend(dev); } -static int omap2_mcspi_resume_noirq(struct device *dev) +static int __maybe_unused omap2_mcspi_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct omap2_mcspi *mcspi = spi_master_get_devdata(master); @@ -1557,17 +1570,17 @@ static int omap2_mcspi_resume_noirq(struct device *dev) dev_warn(mcspi->dev, "%s: failed to set pins: %i\n", __func__, error); - return 0; -} + error = spi_master_resume(master); + if (error) + dev_warn(mcspi->dev, "%s: master resume failed: %i\n", + __func__, error); -#else -#define omap2_mcspi_suspend_noirq NULL -#define omap2_mcspi_resume_noirq NULL -#endif + return pm_runtime_force_resume(dev); +} static const struct dev_pm_ops omap2_mcspi_pm_ops = { - .suspend_noirq = omap2_mcspi_suspend_noirq, - .resume_noirq = omap2_mcspi_resume_noirq, + SET_SYSTEM_SLEEP_PM_OPS(omap2_mcspi_suspend, + omap2_mcspi_resume) .runtime_resume = omap_mcspi_runtime_resume, }; -- cgit v1.2.3 From 243cfe3fb8978c7eec24511aba7dac98819ed896 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Fri, 16 Nov 2018 13:47:11 +0000 Subject: hwmon: (mlxreg-fan) Fix macros for tacho fault reading Fix macros for tacometer fault reading. This fix is relevant for three Mellanox systems MQMB7, MSN37, MSN34, which are about to be released to the customers. At the moment, none of them is at customers sites. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak Signed-off-by: Guenter Roeck --- drivers/hwmon/mlxreg-fan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c index de46577c7d5a..d8fa4bea4bc8 100644 --- a/drivers/hwmon/mlxreg-fan.c +++ b/drivers/hwmon/mlxreg-fan.c @@ -51,7 +51,7 @@ */ #define MLXREG_FAN_GET_RPM(rval, d, s) (DIV_ROUND_CLOSEST(15000000 * 100, \ ((rval) + (s)) * (d))) -#define MLXREG_FAN_GET_FAULT(val, mask) (!!((val) ^ (mask))) +#define MLXREG_FAN_GET_FAULT(val, mask) (!((val) ^ (mask))) #define MLXREG_FAN_PWM_DUTY2STATE(duty) (DIV_ROUND_CLOSEST((duty) * \ MLXREG_FAN_MAX_STATE, \ MLXREG_FAN_MAX_DUTY)) -- cgit v1.2.3 From 09aaf6813cfca4c18034fda7a43e68763f34abb1 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Thu, 15 Nov 2018 10:44:57 +0800 Subject: hwmon: (w83795) temp4_type has writable permission Both datasheet and comments of store_temp_mode() tell us that temp1~4_type is writable, so fix it. Signed-off-by: Yao Wang Signed-off-by: Huacai Chen Fixes: 39deb6993e7c (" hwmon: (w83795) Simplify temperature sensor type handling") Signed-off-by: Guenter Roeck --- drivers/hwmon/w83795.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c index 49276bbdac3d..1bb80f992aa8 100644 --- a/drivers/hwmon/w83795.c +++ b/drivers/hwmon/w83795.c @@ -1691,7 +1691,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr, * somewhere else in the code */ #define SENSOR_ATTR_TEMP(index) { \ - SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \ + SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 5 ? S_IWUSR : 0), \ show_temp_mode, store_temp_mode, NOT_USED, index - 1), \ SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \ NULL, TEMP_READ, index - 1), \ -- cgit v1.2.3 From 8c01db7619f07c85c5cd81ec5eb83608b56c88f5 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 14 Nov 2018 13:55:09 -0800 Subject: HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges When a UHID_CREATE command is written to the uhid char device, a copy_from_user() is done from a user pointer embedded in the command. When the address limit is KERNEL_DS, e.g. as is the case during sys_sendfile(), this can read from kernel memory. Alternatively, information can be leaked from a setuid binary that is tricked to write to the file descriptor. Therefore, forbid UHID_CREATE in these cases. No other commands in uhid_char_write() are affected by this bug and UHID_CREATE is marked as "obsolete", so apply the restriction to UHID_CREATE only rather than to uhid_char_write() entirely. Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to Jann Horn for commit 9da3f2b740544 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses"), allowing this bug to be found. Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com Fixes: d365c6cfd337 ("HID: uhid: add UHID_CREATE and UHID_DESTROY events") Cc: # v3.6+ Cc: Jann Horn Cc: Andy Lutomirski Signed-off-by: Eric Biggers Reviewed-by: Jann Horn Signed-off-by: Jiri Kosina --- drivers/hid/uhid.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c index 3c5507313606..051639c09f72 100644 --- a/drivers/hid/uhid.c +++ b/drivers/hid/uhid.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -722,6 +723,17 @@ static ssize_t uhid_char_write(struct file *file, const char __user *buffer, switch (uhid->input_buf.type) { case UHID_CREATE: + /* + * 'struct uhid_create_req' contains a __user pointer which is + * copied from, so it's unsafe to allow this with elevated + * privileges (e.g. from a setuid binary) or via kernel_write(). + */ + if (file->f_cred != current_cred() || uaccess_kernel()) { + pr_err_once("UHID_CREATE from different security context by process %d (%s), this is not allowed.\n", + task_tgid_vnr(current), current->comm); + ret = -EACCES; + goto unlock; + } ret = uhid_dev_create(uhid, &uhid->input_buf); break; case UHID_CREATE2: -- cgit v1.2.3 From 4d26d1d1e8065bb3326a7c06d5d4698e581443a9 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 14 Nov 2018 14:16:42 +0100 Subject: Revert "HID: uhid: use strlcpy() instead of strncpy()" This reverts commit 336fd4f5f25157e9e8bd50e898a1bbcd99eaea46. Please note that `strlcpy()` does *NOT* do what you think it does. strlcpy() *ALWAYS* reads the full input string, regardless of the 'length' parameter. That is, if the input is not zero-terminated, strlcpy() will *READ* beyond input boundaries. It does this, because it always returns the size it *would* copy if the target was big enough, not the truncated size it actually copied. The original code was perfectly fine. The hid device is zero-initialized and the strncpy() functions copied up to n-1 characters. The result is always zero-terminated this way. This is the third time someone tried to replace strncpy with strlcpy in this function, and gets it wrong. I now added a comment that should at least make people reconsider. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/uhid.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c index 051639c09f72..840634e0f1e3 100644 --- a/drivers/hid/uhid.c +++ b/drivers/hid/uhid.c @@ -497,12 +497,13 @@ static int uhid_dev_create2(struct uhid_device *uhid, goto err_free; } - len = min(sizeof(hid->name), sizeof(ev->u.create2.name)); - strlcpy(hid->name, ev->u.create2.name, len); - len = min(sizeof(hid->phys), sizeof(ev->u.create2.phys)); - strlcpy(hid->phys, ev->u.create2.phys, len); - len = min(sizeof(hid->uniq), sizeof(ev->u.create2.uniq)); - strlcpy(hid->uniq, ev->u.create2.uniq, len); + /* @hid is zero-initialized, strncpy() is correct, strlcpy() not */ + len = min(sizeof(hid->name), sizeof(ev->u.create2.name)) - 1; + strncpy(hid->name, ev->u.create2.name, len); + len = min(sizeof(hid->phys), sizeof(ev->u.create2.phys)) - 1; + strncpy(hid->phys, ev->u.create2.phys, len); + len = min(sizeof(hid->uniq), sizeof(ev->u.create2.uniq)) - 1; + strncpy(hid->uniq, ev->u.create2.uniq, len); hid->ll_driver = &uhid_hid_driver; hid->bus = ev->u.create2.bus; -- cgit v1.2.3 From 385a4886778f6d6e61eff1d4d295af332d7130e1 Mon Sep 17 00:00:00 2001 From: Rodrigo Rivas Costa Date: Sun, 14 Oct 2018 19:36:43 +0200 Subject: HID: steam: remove input device when a hid client is running. Previously, when a HID client such as the Steam Client was running, this driver disabled its input device to avoid doubling the input events. While it worked mostly fine, some games got confused by the idle gamepad, and switched to two player mode, or asked the user to choose which gamepad to use. Other games just crashed, probably a bug in Unity [1]. With this commit, when a HID client starts, the input device is removed; when the HID client ends the input device is recreated. [1]: https://github.com/ValveSoftware/steam-for-linux/issues/5645 Signed-off-by: Rodrigo Rivas Costa Signed-off-by: Jiri Kosina --- drivers/hid/hid-steam.c | 154 ++++++++++++++++++++++++++++-------------------- 1 file changed, 90 insertions(+), 64 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c index 0422ec2b13d2..dc4128bfe2ca 100644 --- a/drivers/hid/hid-steam.c +++ b/drivers/hid/hid-steam.c @@ -23,8 +23,9 @@ * In order to avoid breaking them this driver creates a layered hidraw device, * so it can detect when the client is running and then: * - it will not send any command to the controller. - * - this input device will be disabled, to avoid double input of the same + * - this input device will be removed, to avoid double input of the same * user action. + * When the client is closed, this input device will be created again. * * For additional functions, such as changing the right-pad margin or switching * the led, you can use the user-space tool at: @@ -113,7 +114,7 @@ struct steam_device { spinlock_t lock; struct hid_device *hdev, *client_hdev; struct mutex mutex; - bool client_opened, input_opened; + bool client_opened; struct input_dev __rcu *input; unsigned long quirks; struct work_struct work_connect; @@ -279,18 +280,6 @@ static void steam_set_lizard_mode(struct steam_device *steam, bool enable) } } -static void steam_update_lizard_mode(struct steam_device *steam) -{ - mutex_lock(&steam->mutex); - if (!steam->client_opened) { - if (steam->input_opened) - steam_set_lizard_mode(steam, false); - else - steam_set_lizard_mode(steam, lizard_mode); - } - mutex_unlock(&steam->mutex); -} - static int steam_input_open(struct input_dev *dev) { struct steam_device *steam = input_get_drvdata(dev); @@ -301,7 +290,6 @@ static int steam_input_open(struct input_dev *dev) return ret; mutex_lock(&steam->mutex); - steam->input_opened = true; if (!steam->client_opened && lizard_mode) steam_set_lizard_mode(steam, false); mutex_unlock(&steam->mutex); @@ -313,7 +301,6 @@ static void steam_input_close(struct input_dev *dev) struct steam_device *steam = input_get_drvdata(dev); mutex_lock(&steam->mutex); - steam->input_opened = false; if (!steam->client_opened && lizard_mode) steam_set_lizard_mode(steam, true); mutex_unlock(&steam->mutex); @@ -400,7 +387,7 @@ static int steam_battery_register(struct steam_device *steam) return 0; } -static int steam_register(struct steam_device *steam) +static int steam_input_register(struct steam_device *steam) { struct hid_device *hdev = steam->hdev; struct input_dev *input; @@ -414,17 +401,6 @@ static int steam_register(struct steam_device *steam) return 0; } - /* - * Unlikely, but getting the serial could fail, and it is not so - * important, so make up a serial number and go on. - */ - if (steam_get_serial(steam) < 0) - strlcpy(steam->serial_no, "XXXXXXXXXX", - sizeof(steam->serial_no)); - - hid_info(hdev, "Steam Controller '%s' connected", - steam->serial_no); - input = input_allocate_device(); if (!input) return -ENOMEM; @@ -492,11 +468,6 @@ static int steam_register(struct steam_device *steam) goto input_register_fail; rcu_assign_pointer(steam->input, input); - - /* ignore battery errors, we can live without it */ - if (steam->quirks & STEAM_QUIRK_WIRELESS) - steam_battery_register(steam); - return 0; input_register_fail: @@ -504,27 +475,88 @@ input_register_fail: return ret; } -static void steam_unregister(struct steam_device *steam) +static void steam_input_unregister(struct steam_device *steam) { struct input_dev *input; + rcu_read_lock(); + input = rcu_dereference(steam->input); + rcu_read_unlock(); + if (!input) + return; + RCU_INIT_POINTER(steam->input, NULL); + synchronize_rcu(); + input_unregister_device(input); +} + +static void steam_battery_unregister(struct steam_device *steam) +{ struct power_supply *battery; rcu_read_lock(); - input = rcu_dereference(steam->input); battery = rcu_dereference(steam->battery); rcu_read_unlock(); - if (battery) { - RCU_INIT_POINTER(steam->battery, NULL); - synchronize_rcu(); - power_supply_unregister(battery); + if (!battery) + return; + RCU_INIT_POINTER(steam->battery, NULL); + synchronize_rcu(); + power_supply_unregister(battery); +} + +static int steam_register(struct steam_device *steam) +{ + int ret; + + /* + * This function can be called several times in a row with the + * wireless adaptor, without steam_unregister() between them, because + * another client send a get_connection_status command, for example. + * The battery and serial number are set just once per device. + */ + if (!steam->serial_no[0]) { + /* + * Unlikely, but getting the serial could fail, and it is not so + * important, so make up a serial number and go on. + */ + if (steam_get_serial(steam) < 0) + strlcpy(steam->serial_no, "XXXXXXXXXX", + sizeof(steam->serial_no)); + + hid_info(steam->hdev, "Steam Controller '%s' connected", + steam->serial_no); + + /* ignore battery errors, we can live without it */ + if (steam->quirks & STEAM_QUIRK_WIRELESS) + steam_battery_register(steam); + + mutex_lock(&steam_devices_lock); + list_add(&steam->list, &steam_devices); + mutex_unlock(&steam_devices_lock); } - if (input) { - RCU_INIT_POINTER(steam->input, NULL); - synchronize_rcu(); + + mutex_lock(&steam->mutex); + if (!steam->client_opened) { + steam_set_lizard_mode(steam, lizard_mode); + ret = steam_input_register(steam); + } else { + ret = 0; + } + mutex_unlock(&steam->mutex); + + return ret; +} + +static void steam_unregister(struct steam_device *steam) +{ + steam_battery_unregister(steam); + steam_input_unregister(steam); + if (steam->serial_no[0]) { hid_info(steam->hdev, "Steam Controller '%s' disconnected", steam->serial_no); - input_unregister_device(input); + mutex_lock(&steam_devices_lock); + list_del(&steam->list); + mutex_unlock(&steam_devices_lock); + steam->serial_no[0] = 0; } } @@ -600,6 +632,9 @@ static int steam_client_ll_open(struct hid_device *hdev) mutex_lock(&steam->mutex); steam->client_opened = true; mutex_unlock(&steam->mutex); + + steam_input_unregister(steam); + return ret; } @@ -609,13 +644,13 @@ static void steam_client_ll_close(struct hid_device *hdev) mutex_lock(&steam->mutex); steam->client_opened = false; - if (steam->input_opened) - steam_set_lizard_mode(steam, false); - else - steam_set_lizard_mode(steam, lizard_mode); mutex_unlock(&steam->mutex); hid_hw_close(steam->hdev); + if (steam->connected) { + steam_set_lizard_mode(steam, lizard_mode); + steam_input_register(steam); + } } static int steam_client_ll_raw_request(struct hid_device *hdev, @@ -744,11 +779,6 @@ static int steam_probe(struct hid_device *hdev, } } - mutex_lock(&steam_devices_lock); - steam_update_lizard_mode(steam); - list_add(&steam->list, &steam_devices); - mutex_unlock(&steam_devices_lock); - return 0; hid_hw_open_fail: @@ -774,10 +804,6 @@ static void steam_remove(struct hid_device *hdev) return; } - mutex_lock(&steam_devices_lock); - list_del(&steam->list); - mutex_unlock(&steam_devices_lock); - hid_destroy_device(steam->client_hdev); steam->client_opened = false; cancel_work_sync(&steam->work_connect); @@ -792,12 +818,14 @@ static void steam_remove(struct hid_device *hdev) static void steam_do_connect_event(struct steam_device *steam, bool connected) { unsigned long flags; + bool changed; spin_lock_irqsave(&steam->lock, flags); + changed = steam->connected != connected; steam->connected = connected; spin_unlock_irqrestore(&steam->lock, flags); - if (schedule_work(&steam->work_connect) == 0) + if (changed && schedule_work(&steam->work_connect) == 0) dbg_hid("%s: connected=%d event already queued\n", __func__, connected); } @@ -1019,13 +1047,8 @@ static int steam_raw_event(struct hid_device *hdev, return 0; rcu_read_lock(); input = rcu_dereference(steam->input); - if (likely(input)) { + if (likely(input)) steam_do_input_event(steam, input, data); - } else { - dbg_hid("%s: input data without connect event\n", - __func__); - steam_do_connect_event(steam, true); - } rcu_read_unlock(); break; case STEAM_EV_CONNECT: @@ -1074,7 +1097,10 @@ static int steam_param_set_lizard_mode(const char *val, mutex_lock(&steam_devices_lock); list_for_each_entry(steam, &steam_devices, list) { - steam_update_lizard_mode(steam); + mutex_lock(&steam->mutex); + if (!steam->client_opened) + steam_set_lizard_mode(steam, lizard_mode); + mutex_unlock(&steam->mutex); } mutex_unlock(&steam_devices_lock); return 0; -- cgit v1.2.3 From 12d43aacf9a74d0eb66fd0ea54ebeb79ca28940f Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 14 Nov 2018 05:35:20 +0000 Subject: HID: multitouch: Add pointstick support for Cirque Touchpad Cirque Touchpad/Pointstick combo is similar to Alps devices, it requires MT_CLS_WIN_8_DUAL to expose its pointstick as a mouse. Signed-off-by: Kai-Heng Feng Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-multitouch.c | 6 ++++++ 2 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 3004322eb8e4..3917fc4cf96a 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -275,6 +275,9 @@ #define USB_VENDOR_ID_CIDC 0x1677 +#define I2C_VENDOR_ID_CIRQUE 0x0488 +#define I2C_PRODUCT_ID_CIRQUE_121F 0x121F + #define USB_VENDOR_ID_CJTOUCH 0x24b8 #define USB_DEVICE_ID_CJTOUCH_MULTI_TOUCH_0020 0x0020 #define USB_DEVICE_ID_CJTOUCH_MULTI_TOUCH_0040 0x0040 diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index f7c6de2b6730..dca0a3a90fb8 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -1814,6 +1814,12 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) }, + /* Cirque devices */ + { .driver_data = MT_CLS_WIN_8_DUAL, + HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, + I2C_VENDOR_ID_CIRQUE, + I2C_PRODUCT_ID_CIRQUE_121F) }, + /* CJTouch panels */ { .driver_data = MT_CLS_NSMU, MT_USB_DEVICE(USB_VENDOR_ID_CJTOUCH, -- cgit v1.2.3 From 86c31524b27c7e686841dd4a79eda95cfd989f16 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 14 Nov 2018 07:24:57 +0000 Subject: HID: i2c-hid: Disable runtime PM for LG touchscreen LG touchscreen (1fd2:8001) stops working after reboot: [ 4.859153] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 4.936070] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 9.948224] i2c_hid i2c-SAPS2101:00: failed to reset device. The device in question stops working after receives SLEEP, ON, SLEEP commands in a short period. The scenario is like this: - Once the desktop session closes, it also closed the hid device, so the device gets runtime suspended and receives a SLEEP command. - Before calling shutdown callback, it gets runtime resumed and received an ON command. - In the shutdown callback, it receives another SLEEP command. I failed to find a reliable interval between ON/SLEEP commands that can make it work, so let's simply disable runtime PM for the device. Signed-off-by: Kai-Heng Feng Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/i2c-hid/i2c-hid-core.c | 2 ++ 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 3917fc4cf96a..2114ac647bef 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -710,6 +710,7 @@ #define USB_VENDOR_ID_LG 0x1fd2 #define USB_DEVICE_ID_LG_MULTITOUCH 0x0064 #define USB_DEVICE_ID_LG_MELFAS_MT 0x6007 +#define I2C_DEVICE_ID_LG_8001 0x8001 #define USB_VENDOR_ID_LOGITECH 0x046d #define USB_DEVICE_ID_LOGITECH_AUDIOHUB 0x0a0e diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index 3cde7c1b9c33..8555ce7e737b 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -177,6 +177,8 @@ static const struct i2c_hid_quirks { I2C_HID_QUIRK_NO_RUNTIME_PM }, { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33, I2C_HID_QUIRK_DELAY_AFTER_SLEEP }, + { USB_VENDOR_ID_LG, I2C_DEVICE_ID_LG_8001, + I2C_HID_QUIRK_NO_RUNTIME_PM }, { 0, 0 } }; -- cgit v1.2.3 From fb862c3b199d28bee238d52e8270eae8650d6cb0 Mon Sep 17 00:00:00 2001 From: Sebastian Parschauer Date: Tue, 20 Nov 2018 07:25:08 +0100 Subject: HID: Add quirk for Primax PIXART OEM mice The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for two Primax mice as well. 0x4e22 is the Dell MS111-P and 0x4d0f is the unbranded HP Portia mouse HP 697738-001. Both were built until approx. 2014. Those were the standard mice from those vendors and are still around - even as new old stock. Reference: https://github.com/sriemer/fix-linux-mouse/issues/11 Signed-off-by: Sebastian Parschauer CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 2 ++ drivers/hid/hid-quirks.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 2114ac647bef..ed35c9a9a110 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1210,6 +1210,8 @@ #define USB_DEVICE_ID_PRIMAX_MOUSE_4D22 0x4d22 #define USB_DEVICE_ID_PRIMAX_KEYBOARD 0x4e05 #define USB_DEVICE_ID_PRIMAX_REZEL 0x4e72 +#define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F 0x4d0f +#define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22 0x4e22 #define USB_VENDOR_ID_RISO_KAGAKU 0x1294 /* Riso Kagaku Corp. */ diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index d82e5ab48837..c85a79986b6a 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -130,6 +130,8 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_MOUSE_4D22), HID_QUIRK_ALWAYS_POLL }, + { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F), HID_QUIRK_ALWAYS_POLL }, + { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003), HID_QUIRK_NOGET }, -- cgit v1.2.3 From e2b95b27196cc90f37016d79432fb2af3f9c9291 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:06 +0100 Subject: Revert "HID: input: simplify/fix high-res scroll event handling" This reverts commit 044ee890286153a1aefb40cb8b6659921aecb38b. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-input.c | 43 ++++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 44ea8e7c71a9..28ee2ed88a1a 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -1858,30 +1858,31 @@ EXPORT_SYMBOL_GPL(hidinput_disconnect); void hid_scroll_counter_handle_scroll(struct hid_scroll_counter *counter, int hi_res_value) { - int low_res_value, remainder, multiplier; + int low_res_scroll_amount; + /* Some wheels will rest 7/8ths of a notch from the previous notch + * after slow movement, so we want the threshold for low-res events to + * be in the middle of the notches (e.g. after 4/8ths) as opposed to on + * the notches themselves (8/8ths). + */ + int threshold = counter->resolution_multiplier / 2; input_report_rel(counter->dev, REL_WHEEL_HI_RES, hi_res_value * counter->microns_per_hi_res_unit); - /* - * Update the low-res remainder with the high-res value, - * but reset if the direction has changed. - */ - remainder = counter->remainder; - if ((remainder ^ hi_res_value) < 0) - remainder = 0; - remainder += hi_res_value; - - /* - * Then just use the resolution multiplier to see if - * we should send a low-res (aka regular wheel) event. - */ - multiplier = counter->resolution_multiplier; - low_res_value = remainder / multiplier; - remainder -= low_res_value * multiplier; - counter->remainder = remainder; - - if (low_res_value) - input_report_rel(counter->dev, REL_WHEEL, low_res_value); + counter->remainder += hi_res_value; + if (abs(counter->remainder) >= threshold) { + /* Add (or subtract) 1 because we want to trigger when the wheel + * is half-way to the next notch (i.e. scroll 1 notch after a + * 1/2 notch movement, 2 notches after a 1 1/2 notch movement, + * etc.). + */ + low_res_scroll_amount = + counter->remainder / counter->resolution_multiplier + + (hi_res_value > 0 ? 1 : -1); + input_report_rel(counter->dev, REL_WHEEL, + low_res_scroll_amount); + counter->remainder -= + low_res_scroll_amount * counter->resolution_multiplier; + } } EXPORT_SYMBOL_GPL(hid_scroll_counter_handle_scroll); -- cgit v1.2.3 From d0341efe7449860e1bbfdd282b3b7f0c34309222 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:07 +0100 Subject: Revert "HID: logitech: fix a used uninitialized GCC warning" This reverts commit 5fe2ccbef9d7aecf5c4402c753444f1a12096cfd. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index f01280898b24..5f0c080059c6 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -1231,6 +1231,7 @@ static int hidpp_hrw_get_wheel_capability(struct hidpp_device *hidpp, *multiplier = response.fap.params[0]; return 0; return_default: + *multiplier = 8; hid_warn(hidpp->hid_dev, "Couldn't get wheel multiplier (error %d), assuming %d.\n", ret, *multiplier); @@ -2695,7 +2696,7 @@ static int hi_res_scroll_look_up_microns(__u32 product_id) static int hi_res_scroll_enable(struct hidpp_device *hidpp) { int ret; - u8 multiplier = 8; + u8 multiplier; if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2121) { ret = hidpp_hrw_set_wheel_mode(hidpp, false, true, false); @@ -2703,9 +2704,10 @@ static int hi_res_scroll_enable(struct hidpp_device *hidpp) } else if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2120) { ret = hidpp_hrs_set_highres_scrolling_mode(hidpp, true, &multiplier); - } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */ + } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */ { ret = hidpp10_enable_scrolling_acceleration(hidpp); - + multiplier = 8; + } if (ret) return ret; -- cgit v1.2.3 From a69616d5b3e13f18cdec1c759818aec87866ac0c Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:08 +0100 Subject: Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice" This reverts commit 3fe1d6bbcd16f384d2c7dab2caf8e4b2df9ea7e6. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 5f0c080059c6..fd6a8c325fa0 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -3314,11 +3314,13 @@ static void hidpp_remove(struct hid_device *hdev) static const struct hid_device_id hidpp_devices[] = { { /* wireless touchpad */ - LDJ_DEVICE(0x4011), + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, 0x4011), .driver_data = HIDPP_QUIRK_CLASS_WTP | HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS }, { /* wireless touchpad T650 */ - LDJ_DEVICE(0x4101), + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, 0x4101), .driver_data = HIDPP_QUIRK_CLASS_WTP | HIDPP_QUIRK_DELAYED_INIT }, { /* wireless touchpad T651 */ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, @@ -3358,13 +3360,16 @@ static const struct hid_device_id hidpp_devices[] = { { /* Mouse Logitech Performance MX */ LDJ_DEVICE(0x101a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, { /* Keyboard logitech K400 */ - LDJ_DEVICE(0x4024), + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, 0x4024), .driver_data = HIDPP_QUIRK_CLASS_K400 }, { /* Solar Keyboard Logitech K750 */ - LDJ_DEVICE(0x4002), + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, 0x4002), .driver_data = HIDPP_QUIRK_CLASS_K750 }, - { LDJ_DEVICE(HID_ANY_ID) }, + { HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, HID_ANY_ID)}, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL), .driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS}, -- cgit v1.2.3 From 5372fc3797691065b8318f0cc9ab8695cebb17e1 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:09 +0100 Subject: Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice" This reverts commit d56ca9855bf924f3bc9807a3e42f38539df3f41f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 249 +-------------------------------------- 1 file changed, 4 insertions(+), 245 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index fd6a8c325fa0..7f8218f6ff56 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -64,14 +64,6 @@ MODULE_PARM_DESC(disable_tap_to_click, #define HIDPP_QUIRK_NO_HIDINPUT BIT(23) #define HIDPP_QUIRK_FORCE_OUTPUT_REPORTS BIT(24) #define HIDPP_QUIRK_UNIFYING BIT(25) -#define HIDPP_QUIRK_HI_RES_SCROLL_1P0 BIT(26) -#define HIDPP_QUIRK_HI_RES_SCROLL_X2120 BIT(27) -#define HIDPP_QUIRK_HI_RES_SCROLL_X2121 BIT(28) - -/* Convenience constant to check for any high-res support. */ -#define HIDPP_QUIRK_HI_RES_SCROLL (HIDPP_QUIRK_HI_RES_SCROLL_1P0 | \ - HIDPP_QUIRK_HI_RES_SCROLL_X2120 | \ - HIDPP_QUIRK_HI_RES_SCROLL_X2121) #define HIDPP_QUIRK_DELAYED_INIT HIDPP_QUIRK_NO_HIDINPUT @@ -157,7 +149,6 @@ struct hidpp_device { unsigned long capabilities; struct hidpp_battery battery; - struct hid_scroll_counter vertical_wheel_counter; }; /* HID++ 1.0 error codes */ @@ -1166,101 +1157,6 @@ static int hidpp_battery_get_property(struct power_supply *psy, return ret; } -/* -------------------------------------------------------------------------- */ -/* 0x2120: Hi-resolution scrolling */ -/* -------------------------------------------------------------------------- */ - -#define HIDPP_PAGE_HI_RESOLUTION_SCROLLING 0x2120 - -#define CMD_HI_RESOLUTION_SCROLLING_SET_HIGHRES_SCROLLING_MODE 0x10 - -static int hidpp_hrs_set_highres_scrolling_mode(struct hidpp_device *hidpp, - bool enabled, u8 *multiplier) -{ - u8 feature_index; - u8 feature_type; - int ret; - u8 params[1]; - struct hidpp_report response; - - ret = hidpp_root_get_feature(hidpp, - HIDPP_PAGE_HI_RESOLUTION_SCROLLING, - &feature_index, - &feature_type); - if (ret) - return ret; - - params[0] = enabled ? BIT(0) : 0; - ret = hidpp_send_fap_command_sync(hidpp, feature_index, - CMD_HI_RESOLUTION_SCROLLING_SET_HIGHRES_SCROLLING_MODE, - params, sizeof(params), &response); - if (ret) - return ret; - *multiplier = response.fap.params[1]; - return 0; -} - -/* -------------------------------------------------------------------------- */ -/* 0x2121: HiRes Wheel */ -/* -------------------------------------------------------------------------- */ - -#define HIDPP_PAGE_HIRES_WHEEL 0x2121 - -#define CMD_HIRES_WHEEL_GET_WHEEL_CAPABILITY 0x00 -#define CMD_HIRES_WHEEL_SET_WHEEL_MODE 0x20 - -static int hidpp_hrw_get_wheel_capability(struct hidpp_device *hidpp, - u8 *multiplier) -{ - u8 feature_index; - u8 feature_type; - int ret; - struct hidpp_report response; - - ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_HIRES_WHEEL, - &feature_index, &feature_type); - if (ret) - goto return_default; - - ret = hidpp_send_fap_command_sync(hidpp, feature_index, - CMD_HIRES_WHEEL_GET_WHEEL_CAPABILITY, - NULL, 0, &response); - if (ret) - goto return_default; - - *multiplier = response.fap.params[0]; - return 0; -return_default: - *multiplier = 8; - hid_warn(hidpp->hid_dev, - "Couldn't get wheel multiplier (error %d), assuming %d.\n", - ret, *multiplier); - return ret; -} - -static int hidpp_hrw_set_wheel_mode(struct hidpp_device *hidpp, bool invert, - bool high_resolution, bool use_hidpp) -{ - u8 feature_index; - u8 feature_type; - int ret; - u8 params[1]; - struct hidpp_report response; - - ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_HIRES_WHEEL, - &feature_index, &feature_type); - if (ret) - return ret; - - params[0] = (invert ? BIT(2) : 0) | - (high_resolution ? BIT(1) : 0) | - (use_hidpp ? BIT(0) : 0); - - return hidpp_send_fap_command_sync(hidpp, feature_index, - CMD_HIRES_WHEEL_SET_WHEEL_MODE, - params, sizeof(params), &response); -} - /* -------------------------------------------------------------------------- */ /* 0x4301: Solar Keyboard */ /* -------------------------------------------------------------------------- */ @@ -2524,8 +2420,7 @@ static int m560_raw_event(struct hid_device *hdev, u8 *data, int size) input_report_rel(mydata->input, REL_Y, v); v = hid_snto32(data[6], 8); - hid_scroll_counter_handle_scroll( - &hidpp->vertical_wheel_counter, v); + input_report_rel(mydata->input, REL_WHEEL, v); input_sync(mydata->input); } @@ -2653,73 +2548,6 @@ static int g920_get_config(struct hidpp_device *hidpp) return 0; } -/* -------------------------------------------------------------------------- */ -/* High-resolution scroll wheels */ -/* -------------------------------------------------------------------------- */ - -/** - * struct hi_res_scroll_info - Stores info on a device's high-res scroll wheel. - * @product_id: the HID product ID of the device being described. - * @microns_per_hi_res_unit: the distance moved by the user's finger for each - * high-resolution unit reported by the device, in - * 256ths of a millimetre. - */ -struct hi_res_scroll_info { - __u32 product_id; - int microns_per_hi_res_unit; -}; - -static struct hi_res_scroll_info hi_res_scroll_devices[] = { - { /* Anywhere MX */ - .product_id = 0x1017, .microns_per_hi_res_unit = 445 }, - { /* Performance MX */ - .product_id = 0x101a, .microns_per_hi_res_unit = 406 }, - { /* M560 */ - .product_id = 0x402d, .microns_per_hi_res_unit = 435 }, - { /* MX Master 2S */ - .product_id = 0x4069, .microns_per_hi_res_unit = 406 }, -}; - -static int hi_res_scroll_look_up_microns(__u32 product_id) -{ - int i; - int num_devices = sizeof(hi_res_scroll_devices) - / sizeof(hi_res_scroll_devices[0]); - for (i = 0; i < num_devices; i++) { - if (hi_res_scroll_devices[i].product_id == product_id) - return hi_res_scroll_devices[i].microns_per_hi_res_unit; - } - /* We don't have a value for this device, so use a sensible default. */ - return 406; -} - -static int hi_res_scroll_enable(struct hidpp_device *hidpp) -{ - int ret; - u8 multiplier; - - if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2121) { - ret = hidpp_hrw_set_wheel_mode(hidpp, false, true, false); - hidpp_hrw_get_wheel_capability(hidpp, &multiplier); - } else if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2120) { - ret = hidpp_hrs_set_highres_scrolling_mode(hidpp, true, - &multiplier); - } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */ { - ret = hidpp10_enable_scrolling_acceleration(hidpp); - multiplier = 8; - } - if (ret) - return ret; - - hidpp->vertical_wheel_counter.resolution_multiplier = multiplier; - hidpp->vertical_wheel_counter.microns_per_hi_res_unit = - hi_res_scroll_look_up_microns(hidpp->hid_dev->product); - hid_info(hidpp->hid_dev, "multiplier = %d, microns = %d\n", - multiplier, - hidpp->vertical_wheel_counter.microns_per_hi_res_unit); - return 0; -} - /* -------------------------------------------------------------------------- */ /* Generic HID++ devices */ /* -------------------------------------------------------------------------- */ @@ -2765,11 +2593,6 @@ static void hidpp_populate_input(struct hidpp_device *hidpp, wtp_populate_input(hidpp, input, origin_is_hid_core); else if (hidpp->quirks & HIDPP_QUIRK_CLASS_M560) m560_populate_input(hidpp, input, origin_is_hid_core); - - if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL) { - input_set_capability(input, EV_REL, REL_WHEEL_HI_RES); - hidpp->vertical_wheel_counter.dev = input; - } } static int hidpp_input_configured(struct hid_device *hdev, @@ -2888,27 +2711,6 @@ static int hidpp_raw_event(struct hid_device *hdev, struct hid_report *report, return 0; } -static int hidpp_event(struct hid_device *hdev, struct hid_field *field, - struct hid_usage *usage, __s32 value) -{ - /* This function will only be called for scroll events, due to the - * restriction imposed in hidpp_usages. - */ - struct hidpp_device *hidpp = hid_get_drvdata(hdev); - struct hid_scroll_counter *counter = &hidpp->vertical_wheel_counter; - /* A scroll event may occur before the multiplier has been retrieved or - * the input device set, or high-res scroll enabling may fail. In such - * cases we must return early (falling back to default behaviour) to - * avoid a crash in hid_scroll_counter_handle_scroll. - */ - if (!(hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL) || value == 0 - || counter->dev == NULL || counter->resolution_multiplier == 0) - return 0; - - hid_scroll_counter_handle_scroll(counter, value); - return 1; -} - static int hidpp_initialize_battery(struct hidpp_device *hidpp) { static atomic_t battery_no = ATOMIC_INIT(0); @@ -3120,9 +2922,6 @@ static void hidpp_connect_event(struct hidpp_device *hidpp) if (hidpp->battery.ps) power_supply_changed(hidpp->battery.ps); - if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL) - hi_res_scroll_enable(hidpp); - if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT) || hidpp->delayed_input) /* if the input nodes are already created, we can stop now */ return; @@ -3308,10 +3107,6 @@ static void hidpp_remove(struct hid_device *hdev) mutex_destroy(&hidpp->send_mutex); } -#define LDJ_DEVICE(product) \ - HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, \ - USB_VENDOR_ID_LOGITECH, (product)) - static const struct hid_device_id hidpp_devices[] = { { /* wireless touchpad */ HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, @@ -3326,39 +3121,10 @@ static const struct hid_device_id hidpp_devices[] = { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_T651), .driver_data = HIDPP_QUIRK_CLASS_WTP }, - { /* Mouse Logitech Anywhere MX */ - LDJ_DEVICE(0x1017), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, - { /* Mouse Logitech Cube */ - LDJ_DEVICE(0x4010), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2120 }, - { /* Mouse Logitech M335 */ - LDJ_DEVICE(0x4050), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech M515 */ - LDJ_DEVICE(0x4007), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2120 }, { /* Mouse logitech M560 */ - LDJ_DEVICE(0x402d), - .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560 - | HIDPP_QUIRK_HI_RES_SCROLL_X2120 }, - { /* Mouse Logitech M705 (firmware RQM17) */ - LDJ_DEVICE(0x101b), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, - { /* Mouse Logitech M705 (firmware RQM67) */ - LDJ_DEVICE(0x406d), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech M720 */ - LDJ_DEVICE(0x405e), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech MX Anywhere 2 */ - LDJ_DEVICE(0x404a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { LDJ_DEVICE(0xb013), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { LDJ_DEVICE(0xb018), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { LDJ_DEVICE(0xb01f), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech MX Anywhere 2S */ - LDJ_DEVICE(0x406a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech MX Master */ - LDJ_DEVICE(0x4041), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { LDJ_DEVICE(0x4060), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { LDJ_DEVICE(0x4071), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech MX Master 2S */ - LDJ_DEVICE(0x4069), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech Performance MX */ - LDJ_DEVICE(0x101a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, 0x402d), + .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560 }, { /* Keyboard logitech K400 */ HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, USB_VENDOR_ID_LOGITECH, 0x4024), @@ -3378,19 +3144,12 @@ static const struct hid_device_id hidpp_devices[] = { MODULE_DEVICE_TABLE(hid, hidpp_devices); -static const struct hid_usage_id hidpp_usages[] = { - { HID_GD_WHEEL, EV_REL, REL_WHEEL }, - { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} -}; - static struct hid_driver hidpp_driver = { .name = "logitech-hidpp-device", .id_table = hidpp_devices, .probe = hidpp_probe, .remove = hidpp_remove, .raw_event = hidpp_raw_event, - .usage_table = hidpp_usages, - .event = hidpp_event, .input_configured = hidpp_input_configured, .input_mapping = hidpp_input_mapping, .input_mapped = hidpp_input_mapped, -- cgit v1.2.3 From 00acc9e2c4a55045d73f2615429742369996d801 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:10 +0100 Subject: Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"" This reverts commit 051dc9b0579602bd63e9df74d0879b5293e71581. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 47 +++++++++++----------------------------- 1 file changed, 13 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 7f8218f6ff56..19cc980eebce 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -400,53 +400,32 @@ static void hidpp_prefix_name(char **name, int name_length) #define HIDPP_SET_LONG_REGISTER 0x82 #define HIDPP_GET_LONG_REGISTER 0x83 -/** - * hidpp10_set_register_bit() - Sets a single bit in a HID++ 1.0 register. - * @hidpp_dev: the device to set the register on. - * @register_address: the address of the register to modify. - * @byte: the byte of the register to modify. Should be less than 3. - * Return: 0 if successful, otherwise a negative error code. - */ -static int hidpp10_set_register_bit(struct hidpp_device *hidpp_dev, - u8 register_address, u8 byte, u8 bit) +#define HIDPP_REG_GENERAL 0x00 + +static int hidpp10_enable_battery_reporting(struct hidpp_device *hidpp_dev) { struct hidpp_report response; int ret; u8 params[3] = { 0 }; ret = hidpp_send_rap_command_sync(hidpp_dev, - REPORT_ID_HIDPP_SHORT, - HIDPP_GET_REGISTER, - register_address, - NULL, 0, &response); + REPORT_ID_HIDPP_SHORT, + HIDPP_GET_REGISTER, + HIDPP_REG_GENERAL, + NULL, 0, &response); if (ret) return ret; memcpy(params, response.rap.params, 3); - params[byte] |= BIT(bit); + /* Set the battery bit */ + params[0] |= BIT(4); return hidpp_send_rap_command_sync(hidpp_dev, - REPORT_ID_HIDPP_SHORT, - HIDPP_SET_REGISTER, - register_address, - params, 3, &response); -} - - -#define HIDPP_REG_GENERAL 0x00 - -static int hidpp10_enable_battery_reporting(struct hidpp_device *hidpp_dev) -{ - return hidpp10_set_register_bit(hidpp_dev, HIDPP_REG_GENERAL, 0, 4); -} - -#define HIDPP_REG_FEATURES 0x01 - -/* On HID++ 1.0 devices, high-res scroll was called "scrolling acceleration". */ -static int hidpp10_enable_scrolling_acceleration(struct hidpp_device *hidpp_dev) -{ - return hidpp10_set_register_bit(hidpp_dev, HIDPP_REG_FEATURES, 0, 6); + REPORT_ID_HIDPP_SHORT, + HIDPP_SET_REGISTER, + HIDPP_REG_GENERAL, + params, 3, &response); } #define HIDPP_REG_BATTERY_STATUS 0x07 -- cgit v1.2.3 From f1539a0c2545d7bd82e451bd1464f2a820f55de4 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:11 +0100 Subject: Revert "HID: input: Create a utility class for counting scroll events" This reverts commit 1ff2e1a44e02d4bdbb9be67c7d9acc240a67141f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-input.c | 45 --------------------------------------------- 1 file changed, 45 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 28ee2ed88a1a..d6fab5798487 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -1841,48 +1841,3 @@ void hidinput_disconnect(struct hid_device *hid) } EXPORT_SYMBOL_GPL(hidinput_disconnect); -/** - * hid_scroll_counter_handle_scroll() - Send high- and low-resolution scroll - * events given a high-resolution wheel - * movement. - * @counter: a hid_scroll_counter struct describing the wheel. - * @hi_res_value: the movement of the wheel, in the mouse's high-resolution - * units. - * - * Given a high-resolution movement, this function converts the movement into - * microns and emits high-resolution scroll events for the input device. It also - * uses the multiplier from &struct hid_scroll_counter to emit low-resolution - * scroll events when appropriate for backwards-compatibility with userspace - * input libraries. - */ -void hid_scroll_counter_handle_scroll(struct hid_scroll_counter *counter, - int hi_res_value) -{ - int low_res_scroll_amount; - /* Some wheels will rest 7/8ths of a notch from the previous notch - * after slow movement, so we want the threshold for low-res events to - * be in the middle of the notches (e.g. after 4/8ths) as opposed to on - * the notches themselves (8/8ths). - */ - int threshold = counter->resolution_multiplier / 2; - - input_report_rel(counter->dev, REL_WHEEL_HI_RES, - hi_res_value * counter->microns_per_hi_res_unit); - - counter->remainder += hi_res_value; - if (abs(counter->remainder) >= threshold) { - /* Add (or subtract) 1 because we want to trigger when the wheel - * is half-way to the next notch (i.e. scroll 1 notch after a - * 1/2 notch movement, 2 notches after a 1 1/2 notch movement, - * etc.). - */ - low_res_scroll_amount = - counter->remainder / counter->resolution_multiplier - + (hi_res_value > 0 ? 1 : -1); - input_report_rel(counter->dev, REL_WHEEL, - low_res_scroll_amount); - counter->remainder -= - low_res_scroll_amount * counter->resolution_multiplier; - } -} -EXPORT_SYMBOL_GPL(hid_scroll_counter_handle_scroll); -- cgit v1.2.3 From 45611c61dd503454b2edae00aabe1e429ec49ebe Mon Sep 17 00:00:00 2001 From: Bernd Eckstein <3erndeckstein@gmail.com> Date: Fri, 23 Nov 2018 13:51:26 +0100 Subject: usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2 The bug is not easily reproducable, as it may occur very infrequently (we had machines with 20minutes heavy downloading before it occurred) However, on a virual machine (VMWare on Windows 10 host) it occurred pretty frequently (1-2 seconds after a speedtest was started) dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback before it is set. This causes the following problems: - double free of the skb or potential memory leak - in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually general protection fault Example dmesg output: [ 134.841986] ------------[ cut here ]------------ [ 134.841987] recvmsg bug: copied 9C24A555 seq 9C24B557 rcvnxt 9C25A6B3 fl 0 [ 134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0 [ 134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp