From b563b4e3f2dd601e19b46ada31bd176fc0a16efc Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Fri, 22 Mar 2013 01:29:28 +0100 Subject: cpufreq / intel_pstate: Add function to check that all MSRs are valid Some VMs seem to try to implement some MSRs but not all the registers the driver needs. Check to make sure all the MSR that we need are available. If any of the required MSRs are not available refuse to load. References: https://bugzilla.redhat.com/show_bug.cgi?id=922923 Reported-by: Josh Stone Signed-off-by: Dirk Brandewie Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index f6dd1e761129..cd9c5f4f5805 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -752,6 +752,29 @@ static struct cpufreq_driver intel_pstate_driver = { static int __initdata no_load; +static int intel_pstate_msrs_not_valid(void) +{ + /* Check that all the msr's we are using are valid. */ + u64 aperf, mperf, tmp; + + rdmsrl(MSR_IA32_APERF, aperf); + rdmsrl(MSR_IA32_MPERF, mperf); + + if (!intel_pstate_min_pstate() || + !intel_pstate_max_pstate() || + !intel_pstate_turbo_pstate()) + return -ENODEV; + + rdmsrl(MSR_IA32_APERF, tmp); + if (!(tmp - aperf)) + return -ENODEV; + + rdmsrl(MSR_IA32_MPERF, tmp); + if (!(tmp - mperf)) + return -ENODEV; + + return 0; +} static int __init intel_pstate_init(void) { int cpu, rc = 0; @@ -764,6 +787,9 @@ static int __init intel_pstate_init(void) if (!id) return -ENODEV; + if (intel_pstate_msrs_not_valid()) + return -ENODEV; + pr_info("Intel P-state driver initializing.\n"); all_cpu_data = vmalloc(sizeof(void *) * num_possible_cpus()); -- cgit v1.2.3 From e6f3eb29be471c4b536a91daab76d4aeda72a261 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Sun, 24 Mar 2013 00:54:39 +0100 Subject: cpufreq / intel_pstate: Fix calculation of current frequency Use the correct pstate value to calculate the effective frequency. References: https://bugzilla.redhat.com/show_bug.cgi?id=923942 Reported-by: Satish Balay Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index cd9c5f4f5805..b662529072f7 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -454,7 +454,7 @@ static inline void intel_pstate_calc_busy(struct cpudata *cpu, sample->idletime_us * 100, sample->duration_us); core_pct = div64_u64(sample->aperf * 100, sample->mperf); - sample->freq = cpu->pstate.turbo_pstate * core_pct * 1000; + sample->freq = cpu->pstate.max_pstate * core_pct * 1000; sample->core_pct_busy = div_s64((sample->pstate_pct_busy * core_pct), 100); -- cgit v1.2.3 From 05e99c8cf9d4e53ef6e016815db40a89a6156529 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 20 Mar 2013 14:21:10 +0000 Subject: intel-pstate: Use #defines instead of hard-coded values. They are defined in coreboot (MSR_PLATFORM) and the other one is already defined in msr-index.h. Let's use those. Signed-off-by: Konrad Rzeszutek Wilk Acked-by: Viresh Kumar Acked-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index b662529072f7..ad72922919ed 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -358,14 +358,14 @@ static void intel_pstate_sysfs_expose_params(void) static int intel_pstate_min_pstate(void) { u64 value; - rdmsrl(0xCE, value); + rdmsrl(MSR_PLATFORM_INFO, value); return (value >> 40) & 0xFF; } static int intel_pstate_max_pstate(void) { u64 value; - rdmsrl(0xCE, value); + rdmsrl(MSR_PLATFORM_INFO, value); return (value >> 8) & 0xFF; } @@ -373,7 +373,7 @@ static int intel_pstate_turbo_pstate(void) { u64 value; int nont, ret; - rdmsrl(0x1AD, value); + rdmsrl(MSR_NHM_TURBO_RATIO_LIMIT, value); nont = intel_pstate_max_pstate(); ret = ((value) & 255); if (ret <= nont) -- cgit v1.2.3 From 187da1d97f3a949b967274d7ee2f95d3a4f39251 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Fri, 22 Mar 2013 10:13:52 +0000 Subject: cpufreq: stats: do cpufreq_cpu_put() corresponding to cpufreq_cpu_get() In cpufreq_stats_free_sysfs() we aren't balancing calls to cpufreq_cpu_get() with cpufreq_cpu_put(). This will never let us have ref count to policy->kobj as zero. We will get a hang if somehow cpufreq_driver_unregister() is called. And that can happen when we compile our driver as module and insmod/rmmod it. Signed-off-by: Viresh Kumar Acked-by: Amit Kucheria Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq_stats.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 2fd779eb1ed1..bfd6273fd873 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -180,15 +180,19 @@ static void cpufreq_stats_free_sysfs(unsigned int cpu) { struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); - if (!cpufreq_frequency_get_table(cpu)) + if (!policy) return; - if (policy && !policy_is_shared(policy)) { + if (!cpufreq_frequency_get_table(cpu)) + goto put_ref; + + if (!policy_is_shared(policy)) { pr_debug("%s: Free sysfs stat\n", __func__); sysfs_remove_group(&policy->kobj, &stats_attr_group); } - if (policy) - cpufreq_cpu_put(policy); + +put_ref: + cpufreq_cpu_put(policy); } static int cpufreq_stats_create_table(struct cpufreq_policy *policy, -- cgit v1.2.3 From aa77a52764a92216b61a6c8079b5c01937c046cd Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sun, 24 Mar 2013 15:58:12 +0000 Subject: cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init() With the addition of following patch: fcf8058 cpufreq: Simplify cpufreq_add_dev() cpufreq driver's .init() routine must initialize policy->cpus with mask of all possible CPUs (Online + Offline) that share the clock. Then the core would copy this mask onto policy->related_cpus and will reset policy->cpus to carry only online cpus. acpi-cpufreq driver wasn't updated with this assumption and so sometimes when we try to hot[un]plug CPUs at run time, sysfs directories get corrupted. This patch fixes acpi-cpufreq driver against this corruption. Reported-and-tested-by: Maciej Rutecki Tested-by: Borislav Petkov Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/acpi-cpufreq.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 937bc286591f..57a8774f0b4e 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -730,7 +730,6 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { cpumask_copy(policy->cpus, perf->shared_cpu_map); } - cpumask_copy(policy->related_cpus, perf->shared_cpu_map); #ifdef CONFIG_SMP dmi_check_system(sw_any_bug_dmi_table); @@ -742,7 +741,6 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (check_amd_hwpstate_cpu(cpu) && !acpi_pstate_strict) { cpumask_clear(policy->cpus); cpumask_set_cpu(cpu, policy->cpus); - cpumask_copy(policy->related_cpus, cpu_sibling_mask(cpu)); policy->shared_type = CPUFREQ_SHARED_TYPE_HW; pr_info_once(PFX "overriding BIOS provided _PSD data\n"); } -- cgit v1.2.3 From 469dd1c4ac0869cf7d1f87eac9b5a93865c10b76 Mon Sep 17 00:00:00 2001 From: Fabio Valentini Date: Mon, 11 Mar 2013 19:16:34 +0000 Subject: ACPI / PM: fix suspend and resume on Sony Vaio VGN-FW21M Add Sony Vaio VGN-FW21M to the device blacklist in drivers/acpi/sleep.c. Fixes suspend/resume on this device (device no longer reboots instead of resuming). References: https://bugzilla.kernel.org/show_bug.cgi?id=55001 Signed-off-by: Fabio Valentini Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sleep.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 24213033fbae..9c1a435d10e6 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -193,6 +193,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, { .callback = init_nvs_nosave, + .ident = "Sony Vaio VGN-FW21M", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"), + }, + }, + { + .callback = init_nvs_nosave, .ident = "Sony Vaio VPCEB17FX", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), -- cgit v1.2.3 From aaf9d93be71c68558c25b4052ac979ee6b7eb809 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Tue, 19 Mar 2013 06:48:07 +0000 Subject: ACPI / APEI: fix error status check condition for CPER In Table 18-289, ACPI5.0 SPEC, the error data length in CPER Generic Error Data Entry can be 0, which means this generic error data entry can have only one header. So fix the check conditon for it. Signed-off-by: Chen Gong Reviewed-by: Huang Ying Signed-off-by: Rafael J. Wysocki --- drivers/acpi/apei/cper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c index 1e5d8a40101e..fefc2ca7cc3e 100644 --- a/drivers/acpi/apei/cper.c +++ b/drivers/acpi/apei/cper.c @@ -405,7 +405,7 @@ int apei_estatus_check(const struct acpi_hest_generic_status *estatus) return rc; data_len = estatus->data_length; gdata = (struct acpi_hest_generic_data *)(estatus + 1); - while (data_len > sizeof(*gdata)) { + while (data_len >= sizeof(*gdata)) { gedata_len = gdata->error_data_length; if (gedata_len > data_len - sizeof(*gdata)) return -EINVAL; -- cgit v1.2.3 From b8b6611048b7b57b86fbdc9153649ad4dc52135f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 11 Mar 2013 05:05:16 +0000 Subject: PCI / ACPI: hold acpi_scan_lock during root bus hotplug During merging the PCI tree with the PM/ACPI tree, Linus noticed that we don't use the same lock using patten about ACPI PCI root as acpiphp. Here apply the same locking patten, and we need to execute acpi_bus_hot_remove_device() via acpi_os_hotplug_execute() as it also holds acpi_scan_lock. [rjw: Changelog] Reported-by: Linus Torvalds Signed-off-by: Yinghai Lu No-objection-from: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki --- drivers/acpi/pci_root.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 0ac546d5e53f..5ff173066127 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -646,6 +646,7 @@ static void handle_root_bridge_insertion(acpi_handle handle) static void handle_root_bridge_removal(struct acpi_device *device) { + acpi_status status; struct acpi_eject_event *ej_event; ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL); @@ -661,7 +662,9 @@ static void handle_root_bridge_removal(struct acpi_device *device) ej_event->device = device; ej_event->event = ACPI_NOTIFY_EJECT_REQUEST; - acpi_bus_hot_remove_device(ej_event); + status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device, ej_event); + if (ACPI_FAILURE(status)) + kfree(ej_event); } static void _handle_hotplug_event_root(struct work_struct *work) @@ -676,8 +679,9 @@ static void _handle_hotplug_event_root(struct work_struct *work) handle = hp_work->handle; type = hp_work->type; - root = acpi_pci_find_root(handle); + acpi_scan_lock_acquire(); + root = acpi_pci_find_root(handle); acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); switch (type) { @@ -711,6 +715,7 @@ static void _handle_hotplug_event_root(struct work_struct *work) break; } + acpi_scan_lock_release(); kfree(hp_work); /* allocated in handle_hotplug_event_bridge */ kfree(buffer.pointer); } -- cgit v1.2.3