From 4fb873c9648e383206e0a91cef9b03aa54066aca Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Mon, 5 Nov 2018 16:36:07 +0100
Subject: drm/imx: ignore plane updates on disabled crtcs

This patch fixes backtraces like the following when sending SIGKILL to a
process with a currently pending plane update:

    [drm:ipu_plane_atomic_check] CRTC should be enabled
    [drm:drm_framebuffer_remove] *ERROR* failed to commit
    ------------[ cut here ]------------
    WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498
    atomic remove_fb failed with -22

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/gpu/drm/imx/ipuv3-plane.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c
index c390924de93d..21e964f6ab5c 100644
--- a/drivers/gpu/drm/imx/ipuv3-plane.c
+++ b/drivers/gpu/drm/imx/ipuv3-plane.c
@@ -370,9 +370,9 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
 	if (ret)
 		return ret;
 
-	/* CRTC should be enabled */
+	/* nothing to check when disabling or disabled */
 	if (!crtc_state->enable)
-		return -EINVAL;
+		return 0;
 
 	switch (plane->type) {
 	case DRM_PLANE_TYPE_PRIMARY:
-- 
cgit v1.2.3


From 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Thu, 20 Dec 2018 11:06:38 +0300
Subject: gpu: ipu-v3: Fix i.MX51 CSI control registers offset

The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative
to the control module registers on IPUv3EX.
This patch fixes wrong values for i.MX51 CSI0/CSI1.

Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/gpu/ipu-v3/ipu-common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
index 474b00e19697..5b7cdbfe062f 100644
--- a/drivers/gpu/ipu-v3/ipu-common.c
+++ b/drivers/gpu/ipu-v3/ipu-common.c
@@ -898,8 +898,8 @@ static struct ipu_devtype ipu_type_imx51 = {
 	.cpmem_ofs = 0x1f000000,
 	.srm_ofs = 0x1f040000,
 	.tpm_ofs = 0x1f060000,
-	.csi0_ofs = 0x1f030000,
-	.csi1_ofs = 0x1f038000,
+	.csi0_ofs = 0x1e030000,
+	.csi1_ofs = 0x1e038000,
 	.ic_ofs = 0x1e020000,
 	.disp0_ofs = 0x1e040000,
 	.disp1_ofs = 0x1e048000,
-- 
cgit v1.2.3


From aa3312012f103f91f123600bbf768b11c8f431bc Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Sun, 13 Jan 2019 09:47:42 +0100
Subject: drm/imx: imx-ldb: add missing of_node_puts

The device node iterators perform an of_node_get on each
iteration, so a jump out of the loop requires an of_node_put.

Move the initialization channel->child = child; down to just
before the call to imx_ldb_register so that intervening failures
don't need to clear it.  Add a label at the end of the function to
do all the of_node_puts.

The semantic patch that finds part of this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
*  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/gpu/drm/imx/imx-ldb.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c
index 2c5bbe317353..e31e263cf86b 100644
--- a/drivers/gpu/drm/imx/imx-ldb.c
+++ b/drivers/gpu/drm/imx/imx-ldb.c
@@ -643,8 +643,10 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 		int bus_format;
 
 		ret = of_property_read_u32(child, "reg", &i);
-		if (ret || i < 0 || i > 1)
-			return -EINVAL;
+		if (ret || i < 0 || i > 1) {
+			ret = -EINVAL;
+			goto free_child;
+		}
 
 		if (!of_device_is_available(child))
 			continue;
@@ -657,7 +659,6 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 		channel = &imx_ldb->channel[i];
 		channel->ldb = imx_ldb;
 		channel->chno = i;
-		channel->child = child;
 
 		/*
 		 * The output port is port@4 with an external 4-port mux or
@@ -667,13 +668,13 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 						  imx_ldb->lvds_mux ? 4 : 2, 0,
 						  &channel->panel, &channel->bridge);
 		if (ret && ret != -ENODEV)
-			return ret;
+			goto free_child;
 
 		/* panel ddc only if there is no bridge */
 		if (!channel->bridge) {
 			ret = imx_ldb_panel_ddc(dev, channel, child);
 			if (ret)
-				return ret;
+				goto free_child;
 		}
 
 		bus_format = of_get_bus_format(dev, child);
@@ -689,18 +690,26 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 		if (bus_format < 0) {
 			dev_err(dev, "could not determine data mapping: %d\n",
 				bus_format);
-			return bus_format;
+			ret = bus_format;
+			goto free_child;
 		}
 		channel->bus_format = bus_format;
+		channel->child = child;
 
 		ret = imx_ldb_register(drm, channel);
-		if (ret)
-			return ret;
+		if (ret) {
+			channel->child = NULL;
+			goto free_child;
+		}
 	}
 
 	dev_set_drvdata(dev, imx_ldb);
 
 	return 0;
+
+free_child:
+	of_node_put(child);
+	return ret;
 }
 
 static void imx_ldb_unbind(struct device *dev, struct device *master,
-- 
cgit v1.2.3


From bb867d219fda7fbaabea3314702474c4eac2b91d Mon Sep 17 00:00:00 2001
From: Steve Longerbeam <slongerbeam@gmail.com>
Date: Tue, 16 Oct 2018 17:31:40 -0700
Subject: gpu: ipu-v3: Fix CSI offsets for imx53

The CSI offsets are wrong for both CSI0 and CSI1. They are at
physical address 0x1e030000 and 0x1e038000 respectively.

Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/gpu/ipu-v3/ipu-common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
index 5b7cdbfe062f..0a7d4395d427 100644
--- a/drivers/gpu/ipu-v3/ipu-common.c
+++ b/drivers/gpu/ipu-v3/ipu-common.c
@@ -914,8 +914,8 @@ static struct ipu_devtype ipu_type_imx53 = {
 	.cpmem_ofs = 0x07000000,
 	.srm_ofs = 0x07040000,
 	.tpm_ofs = 0x07060000,
-	.csi0_ofs = 0x07030000,
-	.csi1_ofs = 0x07038000,
+	.csi0_ofs = 0x06030000,
+	.csi1_ofs = 0x06038000,
 	.ic_ofs = 0x06020000,
 	.disp0_ofs = 0x06040000,
 	.disp1_ofs = 0x06048000,
-- 
cgit v1.2.3


From eb0200a4357da100064971689d3a0e9e3cf57f33 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Tue, 18 Dec 2018 16:46:29 +0100
Subject: gpu: ipu-v3: pre: don't trigger update if buffer address doesn't
 change

On a NOP double buffer update where current buffer address is the same
as the next buffer address, the SDW_UPDATE bit clears too late. As we
are now using this bit to determine when it is safe to signal flip
completion to userspace this will delay completion of atomic commits
where one plane doesn't change the buffer by a whole frame period.

Fix this by remembering the last buffer address and just skip the
double buffer update if it would not change the buffer address.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: initialize last_bufaddr in ipu_pre_configure]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/gpu/ipu-v3/ipu-pre.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers')

diff --git a/drivers/gpu/ipu-v3/ipu-pre.c b/drivers/gpu/ipu-v3/ipu-pre.c
index 2f8db9d62551..4a28f3fbb0a2 100644
--- a/drivers/gpu/ipu-v3/ipu-pre.c
+++ b/drivers/gpu/ipu-v3/ipu-pre.c
@@ -106,6 +106,7 @@ struct ipu_pre {
 	void			*buffer_virt;
 	bool			in_use;
 	unsigned int		safe_window_end;
+	unsigned int		last_bufaddr;
 };
 
 static DEFINE_MUTEX(ipu_pre_list_mutex);
@@ -185,6 +186,7 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width,
 
 	writel(bufaddr, pre->regs + IPU_PRE_CUR_BUF);
 	writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
+	pre->last_bufaddr = bufaddr;
 
 	val = IPU_PRE_PREF_ENG_CTRL_INPUT_PIXEL_FORMAT(0) |
 	      IPU_PRE_PREF_ENG_CTRL_INPUT_ACTIVE_BPP(active_bpp) |
@@ -242,7 +244,11 @@ void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr)
 	unsigned short current_yblock;
 	u32 val;
 
+	if (bufaddr == pre->last_bufaddr)
+		return;
+
 	writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
+	pre->last_bufaddr = bufaddr;
 
 	do {
 		if (time_after(jiffies, timeout)) {
-- 
cgit v1.2.3


From 82abf33766712d8446ea137a3400165e31bd12c7 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Fri, 7 Dec 2018 11:16:53 -0800
Subject: drm/sched: Always trace the dependencies we wait on, to fix a race.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The entity->dependency can go away completely once we've called
drm_sched_entity_add_dependency_cb() (if the cb is called before we
get around to tracing).  The tracepoint is more useful if we trace
every dependency instead of just ones that get callbacks installed,
anyway, so just do that.

Fixes any easy-to-produce OOPS when tracing the scheduler on V3D with
"perf record -a -e gpu_scheduler:.\* glxgears" and DEBUG_SLAB enabled.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/scheduler/sched_entity.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/scheduler/sched_entity.c b/drivers/gpu/drm/scheduler/sched_entity.c
index 4463d3826ecb..e2942c9a11a7 100644
--- a/drivers/gpu/drm/scheduler/sched_entity.c
+++ b/drivers/gpu/drm/scheduler/sched_entity.c
@@ -440,13 +440,10 @@ struct drm_sched_job *drm_sched_entity_pop_job(struct drm_sched_entity *entity)
 
 	while ((entity->dependency =
 			sched->ops->dependency(sched_job, entity))) {
+		trace_drm_sched_job_wait_dep(sched_job, entity->dependency);
 
-		if (drm_sched_entity_add_dependency_cb(entity)) {
-
-			trace_drm_sched_job_wait_dep(sched_job,
-						     entity->dependency);
+		if (drm_sched_entity_add_dependency_cb(entity))
 			return NULL;
-		}
 	}
 
 	/* skip jobs from entity that marked guilty */
-- 
cgit v1.2.3


From 727962f030c23422a01e8b22d0f463815fb15ec4 Mon Sep 17 00:00:00 2001
From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Date: Thu, 24 Jan 2019 12:06:00 -0500
Subject: drm/amd/display: Expose connector VRR range via debugfs

[Why]
It's useful to know the min and max vrr range for IGT testing.

[How]
Expose the min and max vfreq for the connector via a debugfs file
on the connector, "vrr_range".

Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 .../drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c  | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
index 9a7ac58eb18e..ddd75a4d8ba5 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
@@ -671,6 +671,25 @@ static ssize_t dp_phy_test_pattern_debugfs_write(struct file *f, const char __us
 	return bytes_from_user;
 }
 
+/*
+ * Returns the min and max vrr vfreq through the connector's debugfs file.
+ * Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range
+ */
+static int vrr_range_show(struct seq_file *m, void *data)
+{
+	struct drm_connector *connector = m->private;
+	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
+
+	if (connector->status != connector_status_connected)
+		return -ENODEV;
+
+	seq_printf(m, "Min: %u\n", (unsigned int)aconnector->min_vfreq);
+	seq_printf(m, "Max: %u\n", (unsigned int)aconnector->max_vfreq);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(vrr_range);
+
 static const struct file_operations dp_link_settings_debugfs_fops = {
 	.owner = THIS_MODULE,
 	.read = dp_link_settings_read,
@@ -697,7 +716,8 @@ static const struct {
 } dp_debugfs_entries[] = {
 		{"link_settings", &dp_link_settings_debugfs_fops},
 		{"phy_settings", &dp_phy_settings_debugfs_fop},
-		{"test_pattern", &dp_phy_test_pattern_fops}
+		{"test_pattern", &dp_phy_test_pattern_fops},
+		{"vrr_range", &vrr_range_fops}
 };
 
 int connector_debugfs_init(struct amdgpu_dm_connector *connector)
-- 
cgit v1.2.3


From 7fd56e0260a22c0cfaf9adb94a2427b76e239dd0 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Date: Wed, 6 Feb 2019 12:01:16 -0200
Subject: drm/vkms: Fix license inconsistent

Fixes license inconsistent related to the VKMS driver and remove the
redundant boilerplate comment.

Fixes: 854502fa0a38 ("drm/vkms: Add basic CRTC initialization")

Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206140116.7qvy2lpwbcd7wds6@smtp.gmail.com
---
 drivers/gpu/drm/vkms/vkms_crc.c    | 3 ++-
 drivers/gpu/drm/vkms/vkms_crtc.c   | 8 +-------
 drivers/gpu/drm/vkms/vkms_drv.c    | 7 +------
 drivers/gpu/drm/vkms/vkms_drv.h    | 2 ++
 drivers/gpu/drm/vkms/vkms_gem.c    | 8 +-------
 drivers/gpu/drm/vkms/vkms_output.c | 8 +-------
 drivers/gpu/drm/vkms/vkms_plane.c  | 8 +-------
 7 files changed, 9 insertions(+), 35 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
index 9d9e8146db90..d7b409a3c0f8 100644
--- a/drivers/gpu/drm/vkms/vkms_crc.c
+++ b/drivers/gpu/drm/vkms/vkms_crc.c
@@ -1,4 +1,5 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
+
 #include "vkms_drv.h"
 #include <linux/crc32.h>
 #include <drm/drm_atomic.h>
diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
index 177bbcb38306..eb56ee893761 100644
--- a/drivers/gpu/drm/vkms/vkms_crtc.c
+++ b/drivers/gpu/drm/vkms/vkms_crtc.c
@@ -1,10 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
 
 #include "vkms_drv.h"
 #include <drm/drm_atomic_helper.h>
diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
index 83087877565c..7dcbecb5fac2 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.c
+++ b/drivers/gpu/drm/vkms/vkms_drv.c
@@ -1,9 +1,4 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
 
 /**
  * DOC: vkms (Virtual Kernel Modesetting)
diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
index e4469cd3d254..81f1cfbeb936 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.h
+++ b/drivers/gpu/drm/vkms/vkms_drv.h
@@ -1,3 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
 #ifndef _VKMS_DRV_H_
 #define _VKMS_DRV_H_
 
diff --git a/drivers/gpu/drm/vkms/vkms_gem.c b/drivers/gpu/drm/vkms/vkms_gem.c
index 80311daed47a..138b0bb325cf 100644
--- a/drivers/gpu/drm/vkms/vkms_gem.c
+++ b/drivers/gpu/drm/vkms/vkms_gem.c
@@ -1,10 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
 
 #include <linux/shmem_fs.h>
 
diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
index 271a0eb9042c..4173e4f48334 100644
--- a/drivers/gpu/drm/vkms/vkms_output.c
+++ b/drivers/gpu/drm/vkms/vkms_output.c
@@ -1,10 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
 
 #include "vkms_drv.h"
 #include <drm/drm_crtc_helper.h>
diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
index 418817600ad1..0e67d2d42f0c 100644
--- a/drivers/gpu/drm/vkms/vkms_plane.c
+++ b/drivers/gpu/drm/vkms/vkms_plane.c
@@ -1,10 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
 
 #include "vkms_drv.h"
 #include <drm/drm_plane_helper.h>
-- 
cgit v1.2.3


From 9659c1af451a92533d2d8dfcecd1a848a08a883b Mon Sep 17 00:00:00 2001
From: Clint Taylor <clinton.a.taylor@intel.com>
Date: Mon, 17 Dec 2018 14:13:47 -0800
Subject: drm/i915/icl: combo port vswing programming changes per BSPEC
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In August 2018 the BSPEC changed the ICL port programming sequence to
closely resemble earlier gen programming sequence. Restrict combo phy to
HBR max rate unless eDP panel is connected to port.

v2: remove debug code that Imre found
v3: simplify translation table if-else
v4: edp translation table now based on link rate and low_swing
v5: Misc review comments + r-b
BSpec: 21257
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1545084827-5776-1-git-send-email-clinton.a.taylor@intel.com
(cherry picked from commit b265a2a6255f581258ccfdccbd2efca51a142fe2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h  |   4 +
 drivers/gpu/drm/i915/intel_ddi.c | 238 ++++++++++++++-------------------------
 drivers/gpu/drm/i915/intel_dp.c  |   4 +-
 3 files changed, 93 insertions(+), 153 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0a7d60509ca7..29acdb96160d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1866,6 +1866,10 @@ enum i915_power_well_id {
 
 #define CNL_PORT_TX_DW7_GRP(port)	_MMIO(_CNL_PORT_TX_DW_GRP((port), 7))
 #define CNL_PORT_TX_DW7_LN0(port)	_MMIO(_CNL_PORT_TX_DW_LN0((port), 7))
+#define ICL_PORT_TX_DW7_AUX(port)	_MMIO(_ICL_PORT_TX_DW_AUX(7, port))
+#define ICL_PORT_TX_DW7_GRP(port)	_MMIO(_ICL_PORT_TX_DW_GRP(7, port))
+#define ICL_PORT_TX_DW7_LN0(port)	_MMIO(_ICL_PORT_TX_DW_LN(7, 0, port))
+#define ICL_PORT_TX_DW7_LN(port, ln)	_MMIO(_ICL_PORT_TX_DW_LN(7, ln, port))
 #define   N_SCALAR(x)			((x) << 24)
 #define   N_SCALAR_MASK			(0x7F << 24)
 
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 4079050f9d6c..7edce1b7b348 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -494,103 +494,58 @@ static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_1_05V[] = {
 	{ 0x2, 0x7F, 0x3F, 0x00, 0x00 },	/* 400   400      0.0   */
 };
 
-struct icl_combo_phy_ddi_buf_trans {
-	u32 dw2_swing_select;
-	u32 dw2_swing_scalar;
-	u32 dw4_scaling;
-};
-
-/* Voltage Swing Programming for VccIO 0.85V for DP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_85V[] = {
-				/* Voltage mV  db    */
-	{ 0x2, 0x98, 0x0018 },	/* 400         0.0   */
-	{ 0x2, 0x98, 0x3015 },	/* 400         3.5   */
-	{ 0x2, 0x98, 0x6012 },	/* 400         6.0   */
-	{ 0x2, 0x98, 0x900F },	/* 400         9.5   */
-	{ 0xB, 0x70, 0x0018 },	/* 600         0.0   */
-	{ 0xB, 0x70, 0x3015 },	/* 600         3.5   */
-	{ 0xB, 0x70, 0x6012 },	/* 600         6.0   */
-	{ 0x5, 0x00, 0x0018 },	/* 800         0.0   */
-	{ 0x5, 0x00, 0x3015 },	/* 800         3.5   */
-	{ 0x6, 0x98, 0x0018 },	/* 1200        0.0   */
-};
-
-/* FIXME - After table is updated in Bspec */
-/* Voltage Swing Programming for VccIO 0.85V for eDP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_85V[] = {
-				/* Voltage mV  db    */
-	{ 0x0, 0x00, 0x00 },	/* 200         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 200         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         6.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 250         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 350         0.0   */
-};
-
-/* Voltage Swing Programming for VccIO 0.95V for DP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_95V[] = {
-				/* Voltage mV  db    */
-	{ 0x2, 0x98, 0x0018 },	/* 400         0.0   */
-	{ 0x2, 0x98, 0x3015 },	/* 400         3.5   */
-	{ 0x2, 0x98, 0x6012 },	/* 400         6.0   */
-	{ 0x2, 0x98, 0x900F },	/* 400         9.5   */
-	{ 0x4, 0x98, 0x0018 },	/* 600         0.0   */
-	{ 0x4, 0x98, 0x3015 },	/* 600         3.5   */
-	{ 0x4, 0x98, 0x6012 },	/* 600         6.0   */
-	{ 0x5, 0x76, 0x0018 },	/* 800         0.0   */
-	{ 0x5, 0x76, 0x3015 },	/* 800         3.5   */
-	{ 0x6, 0x98, 0x0018 },	/* 1200        0.0   */
+/* icl_combo_phy_ddi_translations */
+static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hbr2[] = {
+						/* NT mV Trans mV db    */
+	{ 0xA, 0x35, 0x3F, 0x00, 0x00 },	/* 350   350      0.0   */
+	{ 0xA, 0x4F, 0x37, 0x00, 0x08 },	/* 350   500      3.1   */
+	{ 0xC, 0x71, 0x2F, 0x00, 0x10 },	/* 350   700      6.0   */
+	{ 0x6, 0x7F, 0x2B, 0x00, 0x14 },	/* 350   900      8.2   */
+	{ 0xA, 0x4C, 0x3F, 0x00, 0x00 },	/* 500   500      0.0   */
+	{ 0xC, 0x73, 0x34, 0x00, 0x0B },	/* 500   700      2.9   */
+	{ 0x6, 0x7F, 0x2F, 0x00, 0x10 },	/* 500   900      5.1   */
+	{ 0xC, 0x6C, 0x3C, 0x00, 0x03 },	/* 650   700      0.6   */
+	{ 0x6, 0x7F, 0x35, 0x00, 0x0A },	/* 600   900      3.5   */
+	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 },	/* 900   900      0.0   */
 };
 
-/* FIXME - After table is updated in Bspec */
-/* Voltage Swing Programming for VccIO 0.95V for eDP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_95V[] = {
-				/* Voltage mV  db    */
-	{ 0x0, 0x00, 0x00 },	/* 200         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 200         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         6.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 250         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 350         0.0   */
+static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_edp_hbr2[] = {
+						/* NT mV Trans mV db    */
+	{ 0x0, 0x7F, 0x3F, 0x00, 0x00 },	/* 200   200      0.0   */
+	{ 0x8, 0x7F, 0x38, 0x00, 0x07 },	/* 200   250      1.9   */
+	{ 0x1, 0x7F, 0x33, 0x00, 0x0C },	/* 200   300      3.5   */
+	{ 0x9, 0x7F, 0x31, 0x00, 0x0E },	/* 200   350      4.9   */
+	{ 0x8, 0x7F, 0x3F, 0x00, 0x00 },	/* 250   250      0.0   */
+	{ 0x1, 0x7F, 0x38, 0x00, 0x07 },	/* 250   300      1.6   */
+	{ 0x9, 0x7F, 0x35, 0x00, 0x0A },	/* 250   350      2.9   */
+	{ 0x1, 0x7F, 0x3F, 0x00, 0x00 },	/* 300   300      0.0   */
+	{ 0x9, 0x7F, 0x38, 0x00, 0x07 },	/* 300   350      1.3   */
+	{ 0x9, 0x7F, 0x3F, 0x00, 0x00 },	/* 350   350      0.0   */
 };
 
-/* Voltage Swing Programming for VccIO 1.05V for DP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_1_05V[] = {
-				/* Voltage mV  db    */
-	{ 0x2, 0x98, 0x0018 },	/* 400         0.0   */
-	{ 0x2, 0x98, 0x3015 },	/* 400         3.5   */
-	{ 0x2, 0x98, 0x6012 },	/* 400         6.0   */
-	{ 0x2, 0x98, 0x900F },	/* 400         9.5   */
-	{ 0x4, 0x98, 0x0018 },	/* 600         0.0   */
-	{ 0x4, 0x98, 0x3015 },	/* 600         3.5   */
-	{ 0x4, 0x98, 0x6012 },	/* 600         6.0   */
-	{ 0x5, 0x71, 0x0018 },	/* 800         0.0   */
-	{ 0x5, 0x71, 0x3015 },	/* 800         3.5   */
-	{ 0x6, 0x98, 0x0018 },	/* 1200        0.0   */
+static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_edp_hbr3[] = {
+						/* NT mV Trans mV db    */
+	{ 0xA, 0x35, 0x3F, 0x00, 0x00 },	/* 350   350      0.0   */
+	{ 0xA, 0x4F, 0x37, 0x00, 0x08 },	/* 350   500      3.1   */
+	{ 0xC, 0x71, 0x2F, 0x00, 0x10 },	/* 350   700      6.0   */
+	{ 0x6, 0x7F, 0x2B, 0x00, 0x14 },	/* 350   900      8.2   */
+	{ 0xA, 0x4C, 0x3F, 0x00, 0x00 },	/* 500   500      0.0   */
+	{ 0xC, 0x73, 0x34, 0x00, 0x0B },	/* 500   700      2.9   */
+	{ 0x6, 0x7F, 0x2F, 0x00, 0x10 },	/* 500   900      5.1   */
+	{ 0xC, 0x6C, 0x3C, 0x00, 0x03 },	/* 650   700      0.6   */
+	{ 0x6, 0x7F, 0x35, 0x00, 0x0A },	/* 600   900      3.5   */
+	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 },	/* 900   900      0.0   */
 };
 
-/* FIXME - After table is updated in Bspec */
-/* Voltage Swing Programming for VccIO 1.05V for eDP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_1_05V[] = {
-				/* Voltage mV  db    */
-	{ 0x0, 0x00, 0x00 },	/* 200         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 200         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         6.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 250         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 350         0.0   */
+static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_hdmi[] = {
+						/* NT mV Trans mV db    */
+	{ 0xA, 0x60, 0x3F, 0x00, 0x00 },	/* 450   450      0.0   */
+	{ 0xB, 0x73, 0x36, 0x00, 0x09 },	/* 450   650      3.2   */
+	{ 0x6, 0x7F, 0x31, 0x00, 0x0E },	/* 450   850      5.5   */
+	{ 0xB, 0x73, 0x3F, 0x00, 0x00 },	/* 650   650      0.0   ALS */
+	{ 0x6, 0x7F, 0x37, 0x00, 0x08 },	/* 650   850      2.3   */
+	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 },	/* 850   850      0.0   */
+	{ 0x6, 0x7F, 0x35, 0x00, 0x0A },	/* 600   850      3.0   */
 };
 
 struct icl_mg_phy_ddi_buf_trans {
@@ -871,43 +826,23 @@ cnl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
 	}
 }
 
-static const struct icl_combo_phy_ddi_buf_trans *
+static const struct cnl_ddi_buf_trans *
 icl_get_combo_buf_trans(struct drm_i915_private *dev_priv, enum port port,
-			int type, int *n_entries)
+			int type, int rate, int *n_entries)
 {
-	u32 voltage = I915_READ(ICL_PORT_COMP_DW3(port)) & VOLTAGE_INFO_MASK;
-
-	if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
-		switch (voltage) {
-		case VOLTAGE_INFO_0_85V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_85V);
-			return icl_combo_phy_ddi_translations_edp_0_85V;
-		case VOLTAGE_INFO_0_95V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_95V);
-			return icl_combo_phy_ddi_translations_edp_0_95V;
-		case VOLTAGE_INFO_1_05V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_1_05V);
-			return icl_combo_phy_ddi_translations_edp_1_05V;
-		default:
-			MISSING_CASE(voltage);
-			return NULL;
-		}
-	} else {
-		switch (voltage) {
-		case VOLTAGE_INFO_0_85V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_85V);
-			return icl_combo_phy_ddi_translations_dp_hdmi_0_85V;
-		case VOLTAGE_INFO_0_95V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_95V);
-			return icl_combo_phy_ddi_translations_dp_hdmi_0_95V;
-		case VOLTAGE_INFO_1_05V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_1_05V);
-			return icl_combo_phy_ddi_translations_dp_hdmi_1_05V;
-		default:
-			MISSING_CASE(voltage);
-			return NULL;
-		}
+	if (type == INTEL_OUTPUT_HDMI) {
+		*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_hdmi);
+		return icl_combo_phy_ddi_translations_hdmi;
+	} else if (rate > 540000 && type == INTEL_OUTPUT_EDP) {
+		*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr3);
+		return icl_combo_phy_ddi_translations_edp_hbr3;
+	} else if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
+		*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr2);
+		return icl_combo_phy_ddi_translations_edp_hbr2;
 	}
+
+	*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hbr2);
+	return icl_combo_phy_ddi_translations_dp_hbr2;
 }
 
 static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port)
@@ -918,8 +853,8 @@ static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port por
 
 	if (IS_ICELAKE(dev_priv)) {
 		if (intel_port_is_combophy(dev_priv, port))
-			icl_get_combo_buf_trans(dev_priv, port,
-						INTEL_OUTPUT_HDMI, &n_entries);
+			icl_get_combo_buf_trans(dev_priv, port, INTEL_OUTPUT_HDMI,
+						0, &n_entries);
 		else
 			n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
 		default_entry = n_entries - 1;
@@ -2275,13 +2210,14 @@ static void bxt_ddi_vswing_sequence(struct intel_encoder *encoder,
 u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 	enum port port = encoder->port;
 	int n_entries;
 
 	if (IS_ICELAKE(dev_priv)) {
 		if (intel_port_is_combophy(dev_priv, port))
 			icl_get_combo_buf_trans(dev_priv, port, encoder->type,
-						&n_entries);
+						intel_dp->link_rate, &n_entries);
 		else
 			n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
 	} else if (IS_CANNONLAKE(dev_priv)) {
@@ -2462,14 +2398,15 @@ static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
 }
 
 static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
-					 u32 level, enum port port, int type)
+					u32 level, enum port port, int type,
+					int rate)
 {
-	const struct icl_combo_phy_ddi_buf_trans *ddi_translations = NULL;
+	const struct cnl_ddi_buf_trans *ddi_translations = NULL;
 	u32 n_entries, val;
 	int ln;
 
 	ddi_translations = icl_get_combo_buf_trans(dev_priv, port, type,
-						   &n_entries);
+						   rate, &n_entries);
 	if (!ddi_translations)
 		return;
 
@@ -2478,34 +2415,23 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
 		level = n_entries - 1;
 	}
 
-	/* Set PORT_TX_DW5 Rterm Sel to 110b. */
+	/* Set PORT_TX_DW5 */
 	val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
-	val &= ~RTERM_SELECT_MASK;
+	val &= ~(SCALING_MODE_SEL_MASK | RTERM_SELECT_MASK |
+		  TAP2_DISABLE | TAP3_DISABLE);
+	val |= SCALING_MODE_SEL(0x2);
 	val |= RTERM_SELECT(0x6);
-	I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
-
-	/* Program PORT_TX_DW5 */
-	val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
-	/* Set DisableTap2 and DisableTap3 if MIPI DSI
-	 * Clear DisableTap2 and DisableTap3 for all other Ports
-	 */
-	if (type == INTEL_OUTPUT_DSI) {
-		val |= TAP2_DISABLE;
-		val |= TAP3_DISABLE;
-	} else {
-		val &= ~TAP2_DISABLE;
-		val &= ~TAP3_DISABLE;
-	}
+	val |= TAP3_DISABLE;
 	I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
 
 	/* Program PORT_TX_DW2 */
 	val = I915_READ(ICL_PORT_TX_DW2_LN0(port));
 	val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
 		 RCOMP_SCALAR_MASK);
-	val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_select);
-	val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_select);
+	val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel);
+	val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel);
 	/* Program Rcomp scalar for every table entry */
-	val |= RCOMP_SCALAR(ddi_translations[level].dw2_swing_scalar);
+	val |= RCOMP_SCALAR(0x98);
 	I915_WRITE(ICL_PORT_TX_DW2_GRP(port), val);
 
 	/* Program PORT_TX_DW4 */
@@ -2514,9 +2440,17 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
 		val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
 		val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
 			 CURSOR_COEFF_MASK);
-		val |= ddi_translations[level].dw4_scaling;
+		val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
+		val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
+		val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
 		I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
 	}
+
+	/* Program PORT_TX_DW7 */
+	val = I915_READ(ICL_PORT_TX_DW7_LN0(port));
+	val &= ~N_SCALAR_MASK;
+	val |= N_SCALAR(ddi_translations[level].dw7_n_scalar);
+	I915_WRITE(ICL_PORT_TX_DW7_GRP(port), val);
 }
 
 static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
@@ -2581,7 +2515,7 @@ static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
 	I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
 
 	/* 5. Program swing and de-emphasis */
-	icl_ddi_combo_vswing_program(dev_priv, level, port, type);
+	icl_ddi_combo_vswing_program(dev_priv, level, port, type, rate);
 
 	/* 6. Set training enable to trigger update */
 	val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index fdd2cbc56fa3..22a74608c6e4 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -304,9 +304,11 @@ static int cnl_max_source_rate(struct intel_dp *intel_dp)
 static int icl_max_source_rate(struct intel_dp *intel_dp)
 {
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	enum port port = dig_port->base.port;
 
-	if (port == PORT_B)
+	if (intel_port_is_combophy(dev_priv, port) &&
+	    !intel_dp_is_edp(intel_dp))
 		return 540000;
 
 	return 810000;
-- 
cgit v1.2.3


From 3b91a93597327f682a1c4392350ced99a44840b7 Mon Sep 17 00:00:00 2001
From: Aditya Swarup <aditya.swarup@intel.com>
Date: Thu, 10 Jan 2019 15:08:44 -0800
Subject: drm/i915/cnl: Fix CNL macros for Voltage Swing programming

CNL macros for register groups CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are
configured incorrectly wrt definition of _CNL_PORT_TX_DW_GRP.

v2: Jani suggested to keep the macros organized semantically i.e., by
function, secondarily by port/pipe/transcoder.->(dw, port)

Fixes: 4e53840fdfdd ("drm/i915/icl: Introduce new macros to get combophy registers")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110230844.9213-1-aditya.swarup@intel.com
(cherry picked from commit b14c06ec024947eaa35212f2380e90233d5092e0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 29acdb96160d..067054cf4a86 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1790,7 +1790,7 @@ enum i915_power_well_id {
 #define _CNL_PORT_TX_C_LN0_OFFSET		0x162C40
 #define _CNL_PORT_TX_D_LN0_OFFSET		0x162E40
 #define _CNL_PORT_TX_F_LN0_OFFSET		0x162840
-#define _CNL_PORT_TX_DW_GRP(port, dw)	(_PICK((port), \
+#define _CNL_PORT_TX_DW_GRP(dw, port)	(_PICK((port), \
 					       _CNL_PORT_TX_AE_GRP_OFFSET, \
 					       _CNL_PORT_TX_B_GRP_OFFSET, \
 					       _CNL_PORT_TX_B_GRP_OFFSET, \
@@ -1798,7 +1798,7 @@ enum i915_power_well_id {
 					       _CNL_PORT_TX_AE_GRP_OFFSET, \
 					       _CNL_PORT_TX_F_GRP_OFFSET) + \
 					       4 * (dw))
-#define _CNL_PORT_TX_DW_LN0(port, dw)	(_PICK((port), \
+#define _CNL_PORT_TX_DW_LN0(dw, port)	(_PICK((port), \
 					       _CNL_PORT_TX_AE_LN0_OFFSET, \
 					       _CNL_PORT_TX_B_LN0_OFFSET, \
 					       _CNL_PORT_TX_B_LN0_OFFSET, \
@@ -1834,9 +1834,9 @@ enum i915_power_well_id {
 
 #define _CNL_PORT_TX_DW4_LN0_AE		0x162450
 #define _CNL_PORT_TX_DW4_LN1_AE		0x1624D0
-#define CNL_PORT_TX_DW4_GRP(port)	_MMIO(_CNL_PORT_TX_DW_GRP((port), 4))
-#define CNL_PORT_TX_DW4_LN0(port)	_MMIO(_CNL_PORT_TX_DW_LN0((port), 4))
-#define CNL_PORT_TX_DW4_LN(port, ln)   _MMIO(_CNL_PORT_TX_DW_LN0((port), 4) + \
+#define CNL_PORT_TX_DW4_GRP(port)	_MMIO(_CNL_PORT_TX_DW_GRP(4, (port)))
+#define CNL_PORT_TX_DW4_LN0(port)	_MMIO(_CNL_PORT_TX_DW_LN0(4, (port)))
+#define CNL_PORT_TX_DW4_LN(port, ln)   _MMIO(_CNL_PORT_TX_DW_LN0(4, (port)) + \
 					   ((ln) * (_CNL_PORT_TX_DW4_LN1_AE - \
 						    _CNL_PORT_TX_DW4_LN0_AE)))
 #define ICL_PORT_TX_DW4_AUX(port)	_MMIO(_ICL_PORT_TX_DW_AUX(4, port))
@@ -1864,8 +1864,8 @@ enum i915_power_well_id {
 #define   RTERM_SELECT(x)		((x) << 3)
 #define   RTERM_SELECT_MASK		(0x7 << 3)
 
-#define CNL_PORT_TX_DW7_GRP(port)	_MMIO(_CNL_PORT_TX_DW_GRP((port), 7))
-#define CNL_PORT_TX_DW7_LN0(port)	_MMIO(_CNL_PORT_TX_DW_LN0((port), 7))
+#define CNL_PORT_TX_DW7_GRP(port)	_MMIO(_CNL_PORT_TX_DW_GRP(7, (port)))
+#define CNL_PORT_TX_DW7_LN0(port)	_MMIO(_CNL_PORT_TX_DW_LN0(7, (port)))
 #define ICL_PORT_TX_DW7_AUX(port)	_MMIO(_ICL_PORT_TX_DW_AUX(7, port))
 #define ICL_PORT_TX_DW7_GRP(port)	_MMIO(_ICL_PORT_TX_DW_GRP(7, port))
 #define ICL_PORT_TX_DW7_LN0(port)	_MMIO(_ICL_PORT_TX_DW_LN(7, 0, port))
-- 
cgit v1.2.3


From d8b879bb2ed25e641ab99a5144843786922e2a64 Mon Sep 17 00:00:00 2001
From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Tue, 5 Feb 2019 13:03:53 +0000
Subject: drm/i915/pmu: Fix enable count array size and bounds checking

Enable count array is supposed to have one counter for each possible
engine sampler. As such, array sizing and bounds checking is not correct
and would blow up the asserts if more samplers were added.

No ill-effect in the current code base but lets fix it for correctness.

At the same time tidy the assert for readability and robustness.

v2:
 * One check per assert. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: b46a33e271ed ("drm/i915/pmu: Expose a PMU interface for perf queries")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130353.21105-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 26a11deea685b41a43edb513194718aa1f461c9a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/i915_pmu.c         | 22 +++++++++++++++-------
 drivers/gpu/drm/i915/i915_pmu.h         |  2 ++
 drivers/gpu/drm/i915/intel_ringbuffer.h |  9 +++++----
 3 files changed, 22 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c
index d6c8f8fdfda5..017fc602a10e 100644
--- a/drivers/gpu/drm/i915/i915_pmu.c
+++ b/drivers/gpu/drm/i915/i915_pmu.c
@@ -594,7 +594,8 @@ static void i915_pmu_enable(struct perf_event *event)
 	 * Update the bitmask of enabled events and increment
 	 * the event reference counter.
 	 */
-	GEM_BUG_ON(bit >= I915_PMU_MASK_BITS);
+	BUILD_BUG_ON(ARRAY_SIZE(i915->pmu.enable_count) != I915_PMU_MASK_BITS);
+	GEM_BUG_ON(bit >= ARRAY_SIZE(i915->pmu.enable_count));
 	GEM_BUG_ON(i915->pmu.enable_count[bit] == ~0);
 	i915->pmu.enable |= BIT_ULL(bit);
 	i915->pmu.enable_count[bit]++;
@@ -615,11 +616,16 @@ static void i915_pmu_enable(struct perf_event *event)
 		engine = intel_engine_lookup_user(i915,
 						  engine_event_class(event),
 						  engine_event_instance(event));
-		GEM_BUG_ON(!engine);
-		engine->pmu.enable |= BIT(sample);
 
-		GEM_BUG_ON(sample >= I915_PMU_SAMPLE_BITS);
+		BUILD_BUG_ON(ARRAY_SIZE(engine->pmu.enable_count) !=
+			     I915_ENGINE_SAMPLE_COUNT);
+		BUILD_BUG_ON(ARRAY_SIZE(engine->pmu.sample) !=
+			     I915_ENGINE_SAMPLE_COUNT);
+		GEM_BUG_ON(sample >= ARRAY_SIZE(engine->pmu.enable_count));
+		GEM_BUG_ON(sample >= ARRAY_SIZE(engine->pmu.sample));
 		GEM_BUG_ON(engine->pmu.enable_count[sample] == ~0);
+
+		engine->pmu.enable |= BIT(sample);
 		engine->pmu.enable_count[sample]++;
 	}
 
@@ -649,9 +655,11 @@ static void i915_pmu_disable(struct perf_event *event)
 		engine = intel_engine_lookup_user(i915,
 						  engine_event_class(event),
 						  engine_event_instance(event));
-		GEM_BUG_ON(!engine);
-		GEM_BUG_ON(sample >= I915_PMU_SAMPLE_BITS);
+
+		GEM_BUG_ON(sample >= ARRAY_SIZE(engine->pmu.enable_count));
+		GEM_BUG_ON(sample >= ARRAY_SIZE(engine->pmu.sample));
 		GEM_BUG_ON(engine->pmu.enable_count[sample] == 0);
+
 		/*
 		 * Decrement the reference count and clear the enabled
 		 * bitmask when the last listener on an event goes away.
@@ -660,7 +668,7 @@ static void i915_pmu_disable(struct perf_event *event)
 			engine->pmu.enable &= ~BIT(sample);
 	}
 
-	GEM_BUG_ON(bit >= I915_PMU_MASK_BITS);
+	GEM_BUG_ON(bit >= ARRAY_SIZE(i915->pmu.enable_count));
 	GEM_BUG_ON(i915->pmu.enable_count[bit] == 0);
 	/*
 	 * Decrement the reference count and clear the enabled
diff --git a/drivers/gpu/drm/i915/i915_pmu.h b/drivers/gpu/drm/i915/i915_pmu.h
index 7f164ca3db12..b3728c5f13e7 100644
--- a/drivers/gpu/drm/i915/i915_pmu.h
+++ b/drivers/gpu/drm/i915/i915_pmu.h
@@ -31,6 +31,8 @@ enum {
 	((1 << I915_PMU_SAMPLE_BITS) + \
 	 (I915_PMU_LAST + 1 - __I915_PMU_OTHER(0)))
 
+#define I915_ENGINE_SAMPLE_COUNT (I915_SAMPLE_SEMA + 1)
+
 struct i915_pmu_sample {
 	u64 cur;
 };
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 72edaa7ff411..a1a7cc29fdd1 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -415,16 +415,17 @@ struct intel_engine_cs {
 		/**
 		 * @enable_count: Reference count for the enabled samplers.
 		 *
-		 * Index number corresponds to the bit number from @enable.
+		 * Index number corresponds to @enum drm_i915_pmu_engine_sample.
 		 */
-		unsigned int enable_count[I915_PMU_SAMPLE_BITS];
+		unsigned int enable_count[I915_ENGINE_SAMPLE_COUNT];
 		/**
 		 * @sample: Counter values for sampling events.
 		 *
 		 * Our internal timer stores the current counters in this field.
+		 *
+		 * Index number corresponds to @enum drm_i915_pmu_engine_sample.
 		 */
-#define I915_ENGINE_SAMPLE_MAX (I915_SAMPLE_SEMA + 1)
-		struct i915_pmu_sample sample[I915_ENGINE_SAMPLE_MAX];
+		struct i915_pmu_sample sample[I915_ENGINE_SAMPLE_COUNT];
 	} pmu;
 
 	/*
-- 
cgit v1.2.3


From e8a8fedd57fdcebf0e4f24ef0fc7e29323df8e66 Mon Sep 17 00:00:00 2001
From: Lyude Paul <lyude@redhat.com>
Date: Tue, 29 Jan 2019 14:09:59 -0500
Subject: drm/i915: Block fbdev HPD processing during suspend

When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.

However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.

This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.

(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).

We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.

This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.

Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
  (Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
  intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39ceed6 ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
(cherry picked from commit fe5ec65668cdaa4348631d8ce1766eed43b33c10)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/intel_drv.h   | 10 ++++++++++
 drivers/gpu/drm/i915/intel_fbdev.c | 33 ++++++++++++++++++++++++++++++++-
 2 files changed, 42 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index f94a04b4ad87..e9ddeaf05a14 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -209,6 +209,16 @@ struct intel_fbdev {
 	unsigned long vma_flags;
 	async_cookie_t cookie;
 	int preferred_bpp;
+
+	/* Whether or not fbdev hpd processing is temporarily suspended */
+	bool hpd_suspended : 1;
+	/* Set when a hotplug was received while HPD processing was
+	 * suspended
+	 */
+	bool hpd_waiting : 1;
+
+	/* Protects hpd_suspended */
+	struct mutex hpd_lock;
 };
 
 struct intel_encoder {
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index fb5bb5b32a60..7f365ac0b549 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -679,6 +679,7 @@ int intel_fbdev_init(struct drm_device *dev)
 	if (ifbdev == NULL)
 		return -ENOMEM;
 
+	mutex_init(&ifbdev->hpd_lock);
 	drm_fb_helper_prepare(dev, &ifbdev->helper, &intel_fb_helper_funcs);
 
 	if (!intel_fbdev_init_bios(dev, ifbdev))
@@ -752,6 +753,26 @@ void intel_fbdev_fini(struct drm_i915_private *dev_priv)
 	intel_fbdev_destroy(ifbdev);
 }
 
+/* Suspends/resumes fbdev processing of incoming HPD events. When resuming HPD
+ * processing, fbdev will perform a full connector reprobe if a hotplug event
+ * was received while HPD was suspended.
+ */
+static void intel_fbdev_hpd_set_suspend(struct intel_fbdev *ifbdev, int state)
+{
+	bool send_hpd = false;
+
+	mutex_lock(&ifbdev->hpd_lock);
+	ifbdev->hpd_suspended = state == FBINFO_STATE_SUSPENDED;
+	send_hpd = !ifbdev->hpd_suspended && ifbdev->hpd_waiting;
+	ifbdev->hpd_waiting = false;
+	mutex_unlock(&ifbdev->hpd_lock);
+
+	if (send_hpd) {
+		DRM_DEBUG_KMS("Handling delayed fbcon HPD event\n");
+		drm_fb_helper_hotplug_event(&ifbdev->helper);
+	}
+}
+
 void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
@@ -773,6 +794,7 @@ void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous
 		 */
 		if (state != FBINFO_STATE_RUNNING)
 			flush_work(&dev_priv->fbdev_suspend_work);
+
 		console_lock();
 	} else {
 		/*
@@ -800,17 +822,26 @@ void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous
 
 	drm_fb_helper_set_suspend(&ifbdev->helper, state);
 	console_unlock();
+
+	intel_fbdev_hpd_set_suspend(ifbdev, state);
 }
 
 void intel_fbdev_output_poll_changed(struct drm_device *dev)
 {
 	struct intel_fbdev *ifbdev = to_i915(dev)->fbdev;
+	bool send_hpd;
 
 	if (!ifbdev)
 		return;
 
 	intel_fbdev_sync(ifbdev);
-	if (ifbdev->vma || ifbdev->helper.deferred_setup)
+
+	mutex_lock(&ifbdev->hpd_lock);
+	send_hpd = !ifbdev->hpd_suspended;
+	ifbdev->hpd_waiting = true;
+	mutex_unlock(&ifbdev->hpd_lock);
+
+	if (send_hpd && (ifbdev->vma || ifbdev->helper.deferred_setup))
 		drm_fb_helper_hotplug_event(&ifbdev->helper);
 }
 
-- 
cgit v1.2.3


From 2e7bd10e05afb866b5fb13eda25095c35d7a27cc Mon Sep 17 00:00:00 2001
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Date: Thu, 7 Feb 2019 10:54:53 +0200
Subject: drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set

Make sure the underlying VMA in the process address space is the
same as it was during vm_mmap to avoid applying WC to wrong VMA.

A more long-term solution would be to have vm_mmap_locked variant
in linux/mmap.h for when caller wants to hold mmap_sem for an
extended duration.

v2:
- Refactor the compare function

Fixes: 1816f9236303 ("drm/i915: Support creation of unbound wc user mappings for objects")
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 5c4604e757ba9b193b09768d75a7d2105a5b883f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/i915_gem.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 216f52b744a6..c882ea94172c 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1824,6 +1824,16 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
 	return 0;
 }
 
+static inline bool
+__vma_matches(struct vm_area_struct *vma, struct file *filp,
+	      unsigned long addr, unsigned long size)
+{
+	if (vma->vm_file != filp)
+		return false;
+
+	return vma->vm_start == addr && (vma->vm_end - vma->vm_start) == size;
+}
+
 /**
  * i915_gem_mmap_ioctl - Maps the contents of an object, returning the address
  *			 it is mapped to.
@@ -1882,7 +1892,7 @@ i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
 			return -EINTR;
 		}
 		vma = find_vma(mm, addr);
-		if (vma)
+		if (vma && __vma_matches(vma, obj->base.filp, addr, args->size))
 			vma->vm_page_prot =
 				pgprot_writecombine(vm_get_page_prot(vma->vm_flags));
 		else
-- 
cgit v1.2.3


From fc89a38d99d4b1b33ca5b0e2329f5ddea02ecfb5 Mon Sep 17 00:00:00 2001
From: Jani Nikula <jani.nikula@intel.com>
Date: Fri, 8 Feb 2019 20:42:52 +0200
Subject: drm/i915/opregion: fix version check
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The u32 version field encodes major, minor, revision and reserved. We've
basically been checking for any non-zero version.

Add opregion version logging while at it.

v2: Fix the fix of the version check

Fixes: 04ebaadb9f2d ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-1-jani.nikula@intel.com
(cherry picked from commit 98fdaaca9537b997062f1abc0aa87c61b50ce40a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/intel_opregion.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index b8f106d9ecf8..3035b402973f 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -55,7 +55,12 @@
 struct opregion_header {
 	u8 signature[16];
 	u32 size;
-	u32 opregion_ver;
+	struct {
+		u8 rsvd;
+		u8 revision;
+		u8 minor;
+		u8 major;
+	}  __packed over;
 	u8 bios_ver[32];
 	u8 vbios_ver[16];
 	u8 driver_ver[16];
@@ -925,6 +930,11 @@ int intel_opregion_setup(struct drm_i915_private *dev_priv)
 	opregion->header = base;
 	opregion->lid_state = base + ACPI_CLID;
 
+	DRM_DEBUG_DRIVER("ACPI OpRegion version %u.%u.%u\n",
+			 opregion->header->over.major,
+			 opregion->header->over.minor,
+			 opregion->header->over.revision);
+
 	mboxes = opregion->header->mboxes;
 	if (mboxes & MBOX_ACPI) {
 		DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
@@ -953,7 +963,7 @@ int intel_opregion_setup(struct drm_i915_private *dev_priv)
 	if (dmi_check_system(intel_no_opregion_vbt))
 		goto out;
 
-	if (opregion->header->opregion_ver >= 2 && opregion->asle &&
+	if (opregion->header->over.major >= 2 && opregion->asle &&
 	    opregion->asle->rvda && opregion->asle->rvds) {
 		opregion->rvda = memremap(opregion->asle->rvda,
 					  opregion->asle->rvds,
-- 
cgit v1.2.3


From 16eb0f34cdf4cf04cd92762c7a79f98aa51e053f Mon Sep 17 00:00:00 2001
From: Jani Nikula <jani.nikula@intel.com>
Date: Fri, 8 Feb 2019 20:42:53 +0200
Subject: drm/i915/opregion: rvda is relative from opregion base in opregion
 2.1+
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Starting from opregion version 2.1 (roughly corresponding to ICL+) the
RVDA field is relative from the beginning of opregion, not absolute
address.

Fix the error path while at it.

v2: Make relative vs. absolute conditional on the opregion version,
    bumped for the purpose. Turned out there are machines relying on
    absolute RVDA in the wild.

v3: Fix the version checks

Fixes: 04ebaadb9f2d ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-2-jani.nikula@intel.com
(cherry picked from commit a0f52c3d357af218a9c1f7cd906ab70426176a1a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/intel_opregion.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index 3035b402973f..3ac20153705a 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -124,7 +124,8 @@ struct opregion_asle {
 	u64 fdss;
 	u32 fdsp;
 	u32 stat;
-	u64 rvda;	/* Physical address of raw vbt data */
+	u64 rvda;	/* Physical (2.0) or relative from opregion (2.1+)
+			 * address of raw VBT data. */
 	u32 rvds;	/* Size of raw vbt data */
 	u8 rsvd[58];
 } __packed;
@@ -965,9 +966,24 @@ int intel_opregion_setup(struct drm_i915_private *dev_priv)
 
 	if (opregion->header->over.major >= 2 && opregion->asle &&
 	    opregion->asle->rvda && opregion->asle->rvds) {
-		opregion->rvda = memremap(opregion->asle->rvda,
-					  opregion->asle->rvds,
+		resource_size_t rvda = opregion->asle->rvda;
+
+		/*
+		 * opregion 2.0: rvda is the physical VBT address.
+		 *
+		 * opregion 2.1+: rvda is unsigned, relative offset from
+		 * opregion base, and should never point within opregion.
+		 */
+		if (opregion->header->over.major > 2 ||
+		    opregion->header->over.minor >= 1) {
+			WARN_ON(rvda < OPREGION_SIZE);
+
+			rvda += asls;
+		}
+
+		opregion->rvda = memremap(rvda, opregion->asle->rvds,
 					  MEMREMAP_WB);
+
 		vbt = opregion->rvda;
 		vbt_size = opregion->asle->rvds;
 		if (intel_bios_is_valid_vbt(vbt, vbt_size)) {
@@ -977,6 +993,8 @@ int intel_opregion_setup(struct drm_i915_private *dev_priv)
 			goto out;
 		} else {
 			DRM_DEBUG_KMS("Invalid VBT in ACPI OpRegion (RVDA)\n");
+			memunmap(opregion->rvda);
+			opregion->rvda = NULL;
 		}
 	}
 
-- 
cgit v1.2.3


From 1d69511e49b0107c0a60ff5ef488f5a2512a50ae Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Tue, 12 Feb 2019 09:54:31 -0500
Subject: drm/amdgpu/psp11: TA firmware is optional (v3)

Don't warn or fail if it's missing.

v2: handle xgmi case more gracefully.
v3: handle older kernels properly

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c |  9 +++++++--
 drivers/gpu/drm/amd/amdgpu/psp_v11_0.c  | 28 ++++++++++++++++------------
 2 files changed, 23 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index 8fab0d637ee5..3a9b48b227ac 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -90,8 +90,10 @@ static int psp_sw_fini(void *handle)
 	adev->psp.sos_fw = NULL;
 	release_firmware(adev->psp.asd_fw);
 	adev->psp.asd_fw = NULL;
-	release_firmware(adev->psp.ta_fw);
-	adev->psp.ta_fw = NULL;
+	if (adev->psp.ta_fw) {
+		release_firmware(adev->psp.ta_fw);
+		adev->psp.ta_fw = NULL;
+	}
 	return 0;
 }
 
@@ -435,6 +437,9 @@ static int psp_xgmi_initialize(struct psp_context *psp)
 	struct ta_xgmi_shared_memory *xgmi_cmd;
 	int ret;
 
+	if (!psp->adev->psp.ta_fw)
+		return -ENOENT;
+
 	if (!psp->xgmi_context.initialized) {
 		ret = psp_xgmi_init_shared_buf(psp);
 		if (ret)
diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
index 0c6e7f9b143f..189fcb004579 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
@@ -152,18 +152,22 @@ static int psp_v11_0_init_microcode(struct psp_context *psp)
 
 	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ta.bin", chip_name);
 	err = request_firmware(&adev->psp.ta_fw, fw_name, adev->dev);
-	if (err)
-		goto out2;
-
-	err = amdgpu_ucode_validate(adev->psp.ta_fw);
-	if (err)
-		goto out2;
-
-	ta_hdr = (const struct ta_firmware_header_v1_0 *)adev->psp.ta_fw->data;
-	adev->psp.ta_xgmi_ucode_version = le32_to_cpu(ta_hdr->ta_xgmi_ucode_version);
-	adev->psp.ta_xgmi_ucode_size = le32_to_cpu(ta_hdr->ta_xgmi_size_bytes);
-	adev->psp.ta_xgmi_start_addr = (uint8_t *)ta_hdr +
-		le32_to_cpu(ta_hdr->header.ucode_array_offset_bytes);
+	if (err) {
+		release_firmware(adev->psp.ta_fw);
+		adev->psp.ta_fw = NULL;
+		dev_info(adev->dev,
+			 "psp v11.0: Failed to load firmware \"%s\"\n", fw_name);
+	} else {
+		err = amdgpu_ucode_validate(adev->psp.ta_fw);
+		if (err)
+			goto out2;
+
+		ta_hdr = (const struct ta_firmware_header_v1_0 *)adev->psp.ta_fw->data;
+		adev->psp.ta_xgmi_ucode_version = le32_to_cpu(ta_hdr->ta_xgmi_ucode_version);
+		adev->psp.ta_xgmi_ucode_size = le32_to_cpu(ta_hdr->ta_xgmi_size_bytes);
+		adev->psp.ta_xgmi_start_addr = (uint8_t *)ta_hdr +
+			le32_to_cpu(ta_hdr->header.ucode_array_offset_bytes);
+	}
 
 	return 0;
 
-- 
cgit v1.2.3


From 69ef943dbc14b21987c79f8399ffea08f9a1b446 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <willy@infradead.org>
Date: Thu, 14 Feb 2019 11:03:48 -0800
Subject: drm: Use array_size() when creating lease

Passing an object_count of sufficient size will make
object_count * 4 wrap around to be very small, then a later function
will happily iterate off the end of the object_ids array.  Using
array_size() will saturate at SIZE_MAX, the kmalloc() will fail and
we'll return an -ENOMEM to the norty userspace.

Fixes: 62884cd386b8 ("drm: Add four ioctls for managing drm mode object leases [v7]")
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_lease.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/drm_lease.c b/drivers/gpu/drm/drm_lease.c
index 99cba8ea5d82..5df1256618cc 100644
--- a/drivers/gpu/drm/drm_lease.c
+++ b/drivers/gpu/drm/drm_lease.c
@@ -528,7 +528,8 @@ int drm_mode_create_lease_ioctl(struct drm_device *dev,
 
 	object_count = cl->object_count;
 
-	object_ids = memdup_user(u64_to_user_ptr(cl->object_ids), object_count * sizeof(__u32));
+	object_ids = memdup_user(u64_to_user_ptr(cl->object_ids),
+			array_size(object_count, sizeof(__u32)));
 	if (IS_ERR(object_ids))
 		return PTR_ERR(object_ids);
 
-- 
cgit v1.2.3