From 33630b00183d6e1aa0b196e12d5fdb55a44749c1 Mon Sep 17 00:00:00 2001 From: Sergio Paracuellos Date: Sun, 9 Oct 2016 17:10:32 +0200 Subject: staging: wlan-ng: fix block comment warnings in prism2fw.c This patch fix the following checkpatch.pl warnings in prism2fw.c WARNING: Block comments should align the * on each line WARNING: Block comments use a trailing */ on a separate line Signed-off-by: Sergio Paracuellos Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wlan-ng/prism2fw.c | 485 +++++++++++++++++++------------------ 1 file changed, 248 insertions(+), 237 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/wlan-ng/prism2fw.c b/drivers/staging/wlan-ng/prism2fw.c index 96aa21188669..2454a787b177 100644 --- a/drivers/staging/wlan-ng/prism2fw.c +++ b/drivers/staging/wlan-ng/prism2fw.c @@ -1,49 +1,49 @@ /* from src/prism2/download/prism2dl.c -* -* utility for downloading prism2 images moved into kernelspace -* -* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -* -------------------------------------------------------------------- -* -* linux-wlan -* -* The contents of this file are subject to the Mozilla Public -* License Version 1.1 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.mozilla.org/MPL/ -* -* Software distributed under the License is distributed on an "AS -* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* Alternatively, the contents of this file may be used under the -* terms of the GNU Public License version 2 (the "GPL"), in which -* case the provisions of the GPL are applicable instead of the -* above. If you wish to allow the use of your version of this file -* only under the terms of the GPL and not to allow others to use -* your version of this file under the MPL, indicate your decision -* by deleting the provisions above and replace them with the notice -* and other provisions required by the GPL. If you do not delete -* the provisions above, a recipient may use your version of this -* file under either the MPL or the GPL. -* -* -------------------------------------------------------------------- -* -* Inquiries regarding the linux-wlan Open Source project can be -* made directly to: -* -* AbsoluteValue Systems Inc. -* info@linux-wlan.com -* http://www.linux-wlan.com -* -* -------------------------------------------------------------------- -* -* Portions of the development of this software were funded by -* Intersil Corporation as part of PRISM(R) chipset product development. -* -* -------------------------------------------------------------------- -*/ + * + * utility for downloading prism2 images moved into kernelspace + * + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * -------------------------------------------------------------------- + * + * linux-wlan + * + * The contents of this file are subject to the Mozilla Public + * License Version 1.1 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU Public License version 2 (the "GPL"), in which + * case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision + * by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL. If you do not delete + * the provisions above, a recipient may use your version of this + * file under either the MPL or the GPL. + * + * -------------------------------------------------------------------- + * + * Inquiries regarding the linux-wlan Open Source project can be + * made directly to: + * + * AbsoluteValue Systems Inc. + * info@linux-wlan.com + * http://www.linux-wlan.com + * + * -------------------------------------------------------------------- + * + * Portions of the development of this software were funded by + * Intersil Corporation as part of PRISM(R) chipset product development. + * + * -------------------------------------------------------------------- + */ /*================================================================*/ /* System Includes */ @@ -189,18 +189,19 @@ static int validate_identity(void); /* Function Definitions */ /*---------------------------------------------------------------- -* prism2_fwtry -* -* Try and get firmware into memory -* -* Arguments: -* udev usb device structure -* wlandev wlan device structure -* -* Returns: -* 0 - success -* ~0 - failure -----------------------------------------------------------------*/ + * prism2_fwtry + * + * Try and get firmware into memory + * + * Arguments: + * udev usb device structure + * wlandev wlan device structure + * + * Returns: + * 0 - success + * ~0 - failure + *---------------------------------------------------------------- + */ static int prism2_fwtry(struct usb_device *udev, struct wlandevice *wlandev) { const struct firmware *fw_entry = NULL; @@ -226,18 +227,19 @@ static int prism2_fwtry(struct usb_device *udev, struct wlandevice *wlandev) } /*---------------------------------------------------------------- -* prism2_fwapply -* -* Apply the firmware loaded into memory -* -* Arguments: -* rfptr firmware image in kernel memory -* wlandev device -* -* Returns: -* 0 - success -* ~0 - failure -----------------------------------------------------------------*/ + * prism2_fwapply + * + * Apply the firmware loaded into memory + * + * Arguments: + * rfptr firmware image in kernel memory + * wlandev device + * + * Returns: + * 0 - success + * ~0 - failure + *---------------------------------------------------------------- + */ static int prism2_fwapply(const struct ihex_binrec *rfptr, struct wlandevice *wlandev) { @@ -372,22 +374,23 @@ out: } /*---------------------------------------------------------------- -* crcimage -* -* Adds a CRC16 in the two bytes prior to each block identified by -* an S3 CRC record. Currently, we don't actually do a CRC we just -* insert the value 0xC0DE in hfa384x order. -* -* Arguments: -* fchunk Array of image chunks -* nfchunks Number of image chunks -* s3crc Array of crc records -* ns3crc Number of crc records -* -* Returns: -* 0 success -* ~0 failure -----------------------------------------------------------------*/ + * crcimage + * + * Adds a CRC16 in the two bytes prior to each block identified by + * an S3 CRC record. Currently, we don't actually do a CRC we just + * insert the value 0xC0DE in hfa384x order. + * + * Arguments: + * fchunk Array of image chunks + * nfchunks Number of image chunks + * s3crc Array of crc records + * ns3crc Number of crc records + * + * Returns: + * 0 success + * ~0 failure + *---------------------------------------------------------------- + */ static int crcimage(struct imgchunk *fchunk, unsigned int nfchunks, struct s3crcrec *s3crc, unsigned int ns3crc) { @@ -439,16 +442,17 @@ static int crcimage(struct imgchunk *fchunk, unsigned int nfchunks, } /*---------------------------------------------------------------- -* free_chunks -* -* Clears the chunklist data structures in preparation for a new file. -* -* Arguments: -* none -* -* Returns: -* nothing -----------------------------------------------------------------*/ + * free_chunks + * + * Clears the chunklist data structures in preparation for a new file. + * + * Arguments: + * none + * + * Returns: + * nothing + *---------------------------------------------------------------- + */ static void free_chunks(struct imgchunk *fchunk, unsigned int *nfchunks) { int i; @@ -462,16 +466,17 @@ static void free_chunks(struct imgchunk *fchunk, unsigned int *nfchunks) } /*---------------------------------------------------------------- -* free_srecs -* -* Clears the srec data structures in preparation for a new file. -* -* Arguments: -* none -* -* Returns: -* nothing -----------------------------------------------------------------*/ + * free_srecs + * + * Clears the srec data structures in preparation for a new file. + * + * Arguments: + * none + * + * Returns: + * nothing + *---------------------------------------------------------------- + */ static void free_srecs(void) { ns3data = 0; @@ -486,19 +491,20 @@ static void free_srecs(void) } /*---------------------------------------------------------------- -* mkimage -* -* Scans the currently loaded set of S records for data residing -* in contiguous memory regions. Each contiguous region is then -* made into a 'chunk'. This function assumes that we're building -* a new chunk list. Assumes the s3data items are in sorted order. -* -* Arguments: none -* -* Returns: -* 0 - success -* ~0 - failure (probably an errno) -----------------------------------------------------------------*/ + * mkimage + * + * Scans the currently loaded set of S records for data residing + * in contiguous memory regions. Each contiguous region is then + * made into a 'chunk'. This function assumes that we're building + * a new chunk list. Assumes the s3data items are in sorted order. + * + * Arguments: none + * + * Returns: + * 0 - success + * ~0 - failure (probably an errno) + *---------------------------------------------------------------- + */ static int mkimage(struct imgchunk *clist, unsigned int *ccnt) { int result = 0; @@ -577,19 +583,20 @@ static int mkimage(struct imgchunk *clist, unsigned int *ccnt) } /*---------------------------------------------------------------- -* mkpdrlist -* -* Reads a raw PDA and builds an array of pdrec_t structures. -* -* Arguments: -* pda buffer containing raw PDA bytes -* pdrec ptr to an array of pdrec_t's. Will be filled on exit. -* nrec ptr to a variable that will contain the count of PDRs -* -* Returns: -* 0 - success -* ~0 - failure (probably an errno) -----------------------------------------------------------------*/ + * mkpdrlist + * + * Reads a raw PDA and builds an array of pdrec_t structures. + * + * Arguments: + * pda buffer containing raw PDA bytes + * pdrec ptr to an array of pdrec_t's. Will be filled on exit. + * nrec ptr to a variable that will contain the count of PDRs + * + * Returns: + * 0 - success + * ~0 - failure (probably an errno) + *---------------------------------------------------------------- + */ static int mkpdrlist(struct pda *pda) { u16 *pda16 = (u16 *)pda->buf; @@ -644,22 +651,23 @@ static int mkpdrlist(struct pda *pda) } /*---------------------------------------------------------------- -* plugimage -* -* Plugs the given image using the given plug records from the given -* PDA and filename. -* -* Arguments: -* fchunk Array of image chunks -* nfchunks Number of image chunks -* s3plug Array of plug records -* ns3plug Number of plug records -* pda Current pda data -* -* Returns: -* 0 success -* ~0 failure -----------------------------------------------------------------*/ + * plugimage + * + * Plugs the given image using the given plug records from the given + * PDA and filename. + * + * Arguments: + * fchunk Array of image chunks + * nfchunks Number of image chunks + * s3plug Array of plug records + * ns3plug Number of plug records + * pda Current pda data + * + * Returns: + * 0 success + * ~0 failure + *---------------------------------------------------------------- + */ static int plugimage(struct imgchunk *fchunk, unsigned int nfchunks, struct s3plugrec *s3plug, unsigned int ns3plug, struct pda *pda) { @@ -749,23 +757,24 @@ static int plugimage(struct imgchunk *fchunk, unsigned int nfchunks, } /*---------------------------------------------------------------- -* read_cardpda -* -* Sends the command for the driver to read the pda from the card -* named in the device variable. Upon success, the card pda is -* stored in the "cardpda" variables. Note that the pda structure -* is considered 'well formed' after this function. That means -* that the nrecs is valid, the rec array has been set up, and there's -* a valid PDAEND record in the raw PDA data. -* -* Arguments: -* pda pda structure -* wlandev device -* -* Returns: -* 0 - success -* ~0 - failure (probably an errno) -----------------------------------------------------------------*/ + * read_cardpda + * + * Sends the command for the driver to read the pda from the card + * named in the device variable. Upon success, the card pda is + * stored in the "cardpda" variables. Note that the pda structure + * is considered 'well formed' after this function. That means + * that the nrecs is valid, the rec array has been set up, and there's + * a valid PDAEND record in the raw PDA data. + * + * Arguments: + * pda pda structure + * wlandev device + * + * Returns: + * 0 - success + * ~0 - failure (probably an errno) + *---------------------------------------------------------------- + */ static int read_cardpda(struct pda *pda, struct wlandevice *wlandev) { int result = 0; @@ -802,65 +811,66 @@ static int read_cardpda(struct pda *pda, struct wlandevice *wlandev) } /*---------------------------------------------------------------- -* read_fwfile -* -* Reads the given fw file which should have been compiled from an srec -* file. Each record in the fw file will either be a plain data record, -* a start address record, or other records used for plugging. -* -* Note that data records are expected to be sorted into -* ascending address order in the fw file. -* -* Note also that the start address record, originally an S7 record in -* the srec file, is expected in the fw file to be like a data record but -* with a certain address to make it identifiable. -* -* Here's the SREC format that the fw should have come from: -* S[37]nnaaaaaaaaddd...dddcc -* -* nn - number of bytes starting with the address field -* aaaaaaaa - address in readable (or big endian) format -* dd....dd - 0-245 data bytes (two chars per byte) -* cc - checksum -* -* The S7 record's (there should be only one) address value gets -* converted to an S3 record with address of 0xff400000, with the -* start address being stored as a 4 byte data word. That address is -* the start execution address used for RAM downloads. -* -* The S3 records have a collection of subformats indicated by the -* value of aaaaaaaa: -* 0xff000000 - Plug record, data field format: -* xxxxxxxxaaaaaaaassssssss -* x - PDR code number (little endian) -* a - Address in load image to plug (little endian) -* s - Length of plug data area (little endian) -* -* 0xff100000 - CRC16 generation record, data field format: -* aaaaaaaassssssssbbbbbbbb -* a - Start address for CRC calculation (little endian) -* s - Length of data to calculate over (little endian) -* b - Boolean, true=write crc, false=don't write -* -* 0xff200000 - Info record, data field format: -* ssssttttdd..dd -* s - Size in words (little endian) -* t - Info type (little endian), see #defines and -* struct s3inforec for details about types. -* d - (s - 1) little endian words giving the contents of -* the given info type. -* -* 0xff400000 - Start address record, data field format: -* aaaaaaaa -* a - Address in load image to plug (little endian) -* -* Arguments: -* record firmware image (ihex record structure) in kernel memory -* -* Returns: -* 0 - success -* ~0 - failure (probably an errno) -----------------------------------------------------------------*/ + * read_fwfile + * + * Reads the given fw file which should have been compiled from an srec + * file. Each record in the fw file will either be a plain data record, + * a start address record, or other records used for plugging. + * + * Note that data records are expected to be sorted into + * ascending address order in the fw file. + * + * Note also that the start address record, originally an S7 record in + * the srec file, is expected in the fw file to be like a data record but + * with a certain address to make it identifiable. + * + * Here's the SREC format that the fw should have come from: + * S[37]nnaaaaaaaaddd...dddcc + * + * nn - number of bytes starting with the address field + * aaaaaaaa - address in readable (or big endian) format + * dd....dd - 0-245 data bytes (two chars per byte) + * cc - checksum + * + * The S7 record's (there should be only one) address value gets + * converted to an S3 record with address of 0xff400000, with the + * start address being stored as a 4 byte data word. That address is + * the start execution address used for RAM downloads. + * + * The S3 records have a collection of subformats indicated by the + * value of aaaaaaaa: + * 0xff000000 - Plug record, data field format: + * xxxxxxxxaaaaaaaassssssss + * x - PDR code number (little endian) + * a - Address in load image to plug (little endian) + * s - Length of plug data area (little endian) + * + * 0xff100000 - CRC16 generation record, data field format: + * aaaaaaaassssssssbbbbbbbb + * a - Start address for CRC calculation (little endian) + * s - Length of data to calculate over (little endian) + * b - Boolean, true=write crc, false=don't write + * + * 0xff200000 - Info record, data field format: + * ssssttttdd..dd + * s - Size in words (little endian) + * t - Info type (little endian), see #defines and + * struct s3inforec for details about types. + * d - (s - 1) little endian words giving the contents of + * the given info type. + * + * 0xff400000 - Start address record, data field format: + * aaaaaaaa + * a - Address in load image to plug (little endian) + * + * Arguments: + * record firmware image (ihex record structure) in kernel memory + * + * Returns: + * 0 - success + * ~0 - failure (probably an errno) + *---------------------------------------------------------------- + */ static int read_fwfile(const struct ihex_binrec *record) { int i; @@ -968,20 +978,21 @@ static int read_fwfile(const struct ihex_binrec *record) } /*---------------------------------------------------------------- -* writeimage -* -* Takes the chunks, builds p80211 messages and sends them down -* to the driver for writing to the card. -* -* Arguments: -* wlandev device -* fchunk Array of image chunks -* nfchunks Number of image chunks -* -* Returns: -* 0 success -* ~0 failure -----------------------------------------------------------------*/ + * writeimage + * + * Takes the chunks, builds p80211 messages and sends them down + * to the driver for writing to the card. + * + * Arguments: + * wlandev device + * fchunk Array of image chunks + * nfchunks Number of image chunks + * + * Returns: + * 0 success + * ~0 failure + *---------------------------------------------------------------- + */ static int writeimage(struct wlandevice *wlandev, struct imgchunk *fchunk, unsigned int nfchunks) { -- cgit v1.2.3