From 94ae98433a397dd4695652fc62ca7bc784b08216 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 7 Mar 2013 17:37:59 +0200 Subject: usb: phy: rename all phy drivers to phy-$name-usb.c this will make sure that we have sensible names for all phy drivers. Current situation was already quite bad with too generic names being used. Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-gpio-vbus-usb.c | 416 ++++++++++++++++++++++++++++++++++++ 1 file changed, 416 insertions(+) create mode 100644 drivers/usb/phy/phy-gpio-vbus-usb.c (limited to 'drivers/usb/phy/phy-gpio-vbus-usb.c') diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c new file mode 100644 index 000000000000..a7d4ac591982 --- /dev/null +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -0,0 +1,416 @@ +/* + * gpio-vbus.c - simple GPIO VBUS sensing driver for B peripheral devices + * + * Copyright (c) 2008 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + + +/* + * A simple GPIO VBUS sensing driver for B peripheral only devices + * with internal transceivers. It can control a D+ pullup GPIO and + * a regulator to limit the current drawn from VBUS. + * + * Needs to be loaded before the UDC driver that will use it. + */ +struct gpio_vbus_data { + struct usb_phy phy; + struct device *dev; + struct regulator *vbus_draw; + int vbus_draw_enabled; + unsigned mA; + struct delayed_work work; + int vbus; + int irq; +}; + + +/* + * This driver relies on "both edges" triggering. VBUS has 100 msec to + * stabilize, so the peripheral controller driver may need to cope with + * some bouncing due to current surges (e.g. charging local capacitance) + * and contact chatter. + * + * REVISIT in desperate straits, toggling between rising and falling + * edges might be workable. + */ +#define VBUS_IRQ_FLAGS \ + (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING) + + +/* interface to regulator framework */ +static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA) +{ + struct regulator *vbus_draw = gpio_vbus->vbus_draw; + int enabled; + + if (!vbus_draw) + return; + + enabled = gpio_vbus->vbus_draw_enabled; + if (mA) { + regulator_set_current_limit(vbus_draw, 0, 1000 * mA); + if (!enabled) { + regulator_enable(vbus_draw); + gpio_vbus->vbus_draw_enabled = 1; + } + } else { + if (enabled) { + regulator_disable(vbus_draw); + gpio_vbus->vbus_draw_enabled = 0; + } + } + gpio_vbus->mA = mA; +} + +static int is_vbus_powered(struct gpio_vbus_mach_info *pdata) +{ + int vbus; + + vbus = gpio_get_value(pdata->gpio_vbus); + if (pdata->gpio_vbus_inverted) + vbus = !vbus; + + return vbus; +} + +static void gpio_vbus_work(struct work_struct *work) +{ + struct gpio_vbus_data *gpio_vbus = + container_of(work, struct gpio_vbus_data, work.work); + struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data; + int gpio, status, vbus; + + if (!gpio_vbus->phy.otg->gadget) + return; + + vbus = is_vbus_powered(pdata); + if ((vbus ^ gpio_vbus->vbus) == 0) + return; + gpio_vbus->vbus = vbus; + + /* Peripheral controllers which manage the pullup themselves won't have + * gpio_pullup configured here. If it's configured here, we'll do what + * isp1301_omap::b_peripheral() does and enable the pullup here... although + * that may complicate usb_gadget_{,dis}connect() support. + */ + gpio = pdata->gpio_pullup; + + if (vbus) { + status = USB_EVENT_VBUS; + gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL; + gpio_vbus->phy.last_event = status; + usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget); + + /* drawing a "unit load" is *always* OK, except for OTG */ + set_vbus_draw(gpio_vbus, 100); + + /* optionally enable D+ pullup */ + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, !pdata->gpio_pullup_inverted); + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); + } else { + /* optionally disable D+ pullup */ + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, pdata->gpio_pullup_inverted); + + set_vbus_draw(gpio_vbus, 0); + + usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget); + status = USB_EVENT_NONE; + gpio_vbus->phy.state = OTG_STATE_B_IDLE; + gpio_vbus->phy.last_event = status; + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); + } +} + +/* VBUS change IRQ handler */ +static irqreturn_t gpio_vbus_irq(int irq, void *data) +{ + struct platform_device *pdev = data; + struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; + struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); + struct usb_otg *otg = gpio_vbus->phy.otg; + + dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n", + is_vbus_powered(pdata) ? "supplied" : "inactive", + otg->gadget ? otg->gadget->name : "none"); + + if (otg->gadget) + schedule_delayed_work(&gpio_vbus->work, msecs_to_jiffies(100)); + + return IRQ_HANDLED; +} + +/* OTG transceiver interface */ + +/* bind/unbind the peripheral controller */ +static int gpio_vbus_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct gpio_vbus_data *gpio_vbus; + struct gpio_vbus_mach_info *pdata; + struct platform_device *pdev; + int gpio; + + gpio_vbus = container_of(otg->phy, struct gpio_vbus_data, phy); + pdev = to_platform_device(gpio_vbus->dev); + pdata = gpio_vbus->dev->platform_data; + gpio = pdata->gpio_pullup; + + if (!gadget) { + dev_dbg(&pdev->dev, "unregistering gadget '%s'\n", + otg->gadget->name); + + /* optionally disable D+ pullup */ + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, pdata->gpio_pullup_inverted); + + set_vbus_draw(gpio_vbus, 0); + + usb_gadget_vbus_disconnect(otg->gadget); + otg->phy->state = OTG_STATE_UNDEFINED; + + otg->gadget = NULL; + return 0; + } + + otg->gadget = gadget; + dev_dbg(&pdev->dev, "registered gadget '%s'\n", gadget->name); + + /* initialize connection state */ + gpio_vbus->vbus = 0; /* start with disconnected */ + gpio_vbus_irq(gpio_vbus->irq, pdev); + return 0; +} + +/* effective for B devices, ignored for A-peripheral */ +static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA) +{ + struct gpio_vbus_data *gpio_vbus; + + gpio_vbus = container_of(phy, struct gpio_vbus_data, phy); + + if (phy->state == OTG_STATE_B_PERIPHERAL) + set_vbus_draw(gpio_vbus, mA); + return 0; +} + +/* for non-OTG B devices: set/clear transceiver suspend mode */ +static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend) +{ + struct gpio_vbus_data *gpio_vbus; + + gpio_vbus = container_of(phy, struct gpio_vbus_data, phy); + + /* draw max 0 mA from vbus in suspend mode; or the previously + * recorded amount of current if not suspended + * + * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA + * if they're wake-enabled ... we don't handle that yet. + */ + return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA); +} + +/* platform driver interface */ + +static int __init gpio_vbus_probe(struct platform_device *pdev) +{ + struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; + struct gpio_vbus_data *gpio_vbus; + struct resource *res; + int err, gpio, irq; + unsigned long irqflags; + + if (!pdata || !gpio_is_valid(pdata->gpio_vbus)) + return -EINVAL; + gpio = pdata->gpio_vbus; + + gpio_vbus = kzalloc(sizeof(struct gpio_vbus_data), GFP_KERNEL); + if (!gpio_vbus) + return -ENOMEM; + + gpio_vbus->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); + if (!gpio_vbus->phy.otg) { + kfree(gpio_vbus); + return -ENOMEM; + } + + platform_set_drvdata(pdev, gpio_vbus); + gpio_vbus->dev = &pdev->dev; + gpio_vbus->phy.label = "gpio-vbus"; + gpio_vbus->phy.set_power = gpio_vbus_set_power; + gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend; + gpio_vbus->phy.state = OTG_STATE_UNDEFINED; + + gpio_vbus->phy.otg->phy = &gpio_vbus->phy; + gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral; + + err = gpio_request(gpio, "vbus_detect"); + if (err) { + dev_err(&pdev->dev, "can't request vbus gpio %d, err: %d\n", + gpio, err); + goto err_gpio; + } + gpio_direction_input(gpio); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res) { + irq = res->start; + irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED; + } else { + irq = gpio_to_irq(gpio); + irqflags = VBUS_IRQ_FLAGS; + } + + gpio_vbus->irq = irq; + + /* if data line pullup is in use, initialize it to "not pulling up" */ + gpio = pdata->gpio_pullup; + if (gpio_is_valid(gpio)) { + err = gpio_request(gpio, "udc_pullup"); + if (err) { + dev_err(&pdev->dev, + "can't request pullup gpio %d, err: %d\n", + gpio, err); + gpio_free(pdata->gpio_vbus); + goto err_gpio; + } + gpio_direction_output(gpio, pdata->gpio_pullup_inverted); + } + + err = request_irq(irq, gpio_vbus_irq, irqflags, "vbus_detect", pdev); + if (err) { + dev_err(&pdev->dev, "can't request irq %i, err: %d\n", + irq, err); + goto err_irq; + } + + ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier); + + INIT_DELAYED_WORK(&gpio_vbus->work, gpio_vbus_work); + + gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw"); + if (IS_ERR(gpio_vbus->vbus_draw)) { + dev_dbg(&pdev->dev, "can't get vbus_draw regulator, err: %ld\n", + PTR_ERR(gpio_vbus->vbus_draw)); + gpio_vbus->vbus_draw = NULL; + } + + /* only active when a gadget is registered */ + err = usb_add_phy(&gpio_vbus->phy, USB_PHY_TYPE_USB2); + if (err) { + dev_err(&pdev->dev, "can't register transceiver, err: %d\n", + err); + goto err_otg; + } + + device_init_wakeup(&pdev->dev, pdata->wakeup); + + return 0; +err_otg: + regulator_put(gpio_vbus->vbus_draw); + free_irq(irq, pdev); +err_irq: + if (gpio_is_valid(pdata->gpio_pullup)) + gpio_free(pdata->gpio_pullup); + gpio_free(pdata->gpio_vbus); +err_gpio: + platform_set_drvdata(pdev, NULL); + kfree(gpio_vbus->phy.otg); + kfree(gpio_vbus); + return err; +} + +static int __exit gpio_vbus_remove(struct platform_device *pdev) +{ + struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); + struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; + int gpio = pdata->gpio_vbus; + + device_init_wakeup(&pdev->dev, 0); + cancel_delayed_work_sync(&gpio_vbus->work); + regulator_put(gpio_vbus->vbus_draw); + + usb_remove_phy(&gpio_vbus->phy); + + free_irq(gpio_vbus->irq, pdev); + if (gpio_is_valid(pdata->gpio_pullup)) + gpio_free(pdata->gpio_pullup); + gpio_free(gpio); + platform_set_drvdata(pdev, NULL); + kfree(gpio_vbus->phy.otg); + kfree(gpio_vbus); + + return 0; +} + +#ifdef CONFIG_PM +static int gpio_vbus_pm_suspend(struct device *dev) +{ + struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(gpio_vbus->irq); + + return 0; +} + +static int gpio_vbus_pm_resume(struct device *dev) +{ + struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(gpio_vbus->irq); + + return 0; +} + +static const struct dev_pm_ops gpio_vbus_dev_pm_ops = { + .suspend = gpio_vbus_pm_suspend, + .resume = gpio_vbus_pm_resume, +}; +#endif + +/* NOTE: the gpio-vbus device may *NOT* be hotplugged */ + +MODULE_ALIAS("platform:gpio-vbus"); + +static struct platform_driver gpio_vbus_driver = { + .driver = { + .name = "gpio-vbus", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &gpio_vbus_dev_pm_ops, +#endif + }, + .remove = __exit_p(gpio_vbus_remove), +}; + +module_platform_driver_probe(gpio_vbus_driver, gpio_vbus_probe); + +MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver"); +MODULE_AUTHOR("Philipp Zabel"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3