From 1eec34e9f25664cf71e05321329d128e0565beae Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 13 Nov 2014 18:28:47 +0100 Subject: usb: musb: musb_cppi41: recognize HS devices in hostmode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is a poll loop for max 25us for HS devices. Now guess what, I tested it in gadget mode and forgot about the little detail. Nobody seem to have it noticed… This patch adds the missing logic for hostmode so it is recognized in host and device mode properly. Fixes: 50aea6fca771 ("usb: musb: cppi41: fire hrtimer according to programmed channel length") Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_cppi41.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/usb/musb/musb_cppi41.c') diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index 5a9b977fbc19..f64fd964dc6d 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -253,6 +253,7 @@ static void cppi41_dma_callback(void *private_data) cppi41_trans_done(cppi41_channel); } else { struct cppi41_dma_controller *controller; + int is_hs = 0; /* * On AM335x it has been observed that the TX interrupt fires * too early that means the TXFIFO is not yet empty but the DMA @@ -265,7 +266,14 @@ static void cppi41_dma_callback(void *private_data) */ controller = cppi41_channel->controller; - if (musb->g.speed == USB_SPEED_HIGH) { + if (is_host_active(musb)) { + if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED) + is_hs = 1; + } else { + if (musb->g.speed == USB_SPEED_HIGH) + is_hs = 1; + } + if (is_hs) { unsigned wait = 25; do { -- cgit v1.2.3