From 8c3cde5dd639afc7a17fb1e78f4579735a1c95e6 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Thu, 16 Jan 2020 13:14:04 +0100 Subject: serial: 8250_bcm2835aux: Allocate uart_8250_port on stack The bcm2835aux UART driver stores a struct uart_8250_port in its private data even though it's only passed once to serial8250_register_8250_port() (which copies all relevant data) and becomes obsolete afterwards. Allocate the struct on the stack instead for simplicity and to conserve memory. The driver also initializes a spinlock in the struct which is never used. Drop that as well. Signed-off-by: Lukas Wunner Cc: Martin Sperl Reviewed-by: Matthias Brugger Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne Link: https://lore.kernel.org/r/421d3aed4c34cc8447ac9c26c320961f1b787f11.1579175223.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_bcm2835aux.c | 33 ++++++++++++++----------------- 1 file changed, 15 insertions(+), 18 deletions(-) (limited to 'drivers/tty/serial/8250/8250_bcm2835aux.c') diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index fb850d0ad643..f03d38e7c3a7 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -17,13 +17,13 @@ #include "8250.h" struct bcm2835aux_data { - struct uart_8250_port uart; struct clk *clk; int line; }; static int bcm2835aux_serial_probe(struct platform_device *pdev) { + struct uart_8250_port up = { }; struct bcm2835aux_data *data; struct resource *res; int ret; @@ -34,17 +34,14 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) return -ENOMEM; /* initialize data */ - spin_lock_init(&data->uart.port.lock); - data->uart.capabilities = UART_CAP_FIFO | UART_CAP_MINI; - data->uart.port.dev = &pdev->dev; - data->uart.port.regshift = 2; - data->uart.port.type = PORT_16550; - data->uart.port.iotype = UPIO_MEM; - data->uart.port.fifosize = 8; - data->uart.port.flags = UPF_SHARE_IRQ | - UPF_FIXED_PORT | - UPF_FIXED_TYPE | - UPF_SKIP_TEST; + up.capabilities = UART_CAP_FIFO | UART_CAP_MINI; + up.port.dev = &pdev->dev; + up.port.regshift = 2; + up.port.type = PORT_16550; + up.port.iotype = UPIO_MEM; + up.port.fifosize = 8; + up.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE | + UPF_SKIP_TEST; /* get the clock - this also enables the HW */ data->clk = devm_clk_get(&pdev->dev, NULL); @@ -59,7 +56,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) ret = platform_get_irq(pdev, 0); if (ret < 0) return ret; - data->uart.port.irq = ret; + up.port.irq = ret; /* map the main registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -67,15 +64,15 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) dev_err(&pdev->dev, "memory resource not found"); return -EINVAL; } - data->uart.port.membase = devm_ioremap_resource(&pdev->dev, res); - ret = PTR_ERR_OR_ZERO(data->uart.port.membase); + up.port.membase = devm_ioremap_resource(&pdev->dev, res); + ret = PTR_ERR_OR_ZERO(up.port.membase); if (ret) return ret; /* Check for a fixed line number */ ret = of_alias_get_id(pdev->dev.of_node, "serial"); if (ret >= 0) - data->uart.port.line = ret; + up.port.line = ret; /* enable the clock as a last step */ ret = clk_prepare_enable(data->clk); @@ -90,10 +87,10 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) * so we have to multiply the actual clock by 2 * to get identical baudrates. */ - data->uart.port.uartclk = clk_get_rate(data->clk) * 2; + up.port.uartclk = clk_get_rate(data->clk) * 2; /* register the port */ - ret = serial8250_register_8250_port(&data->uart); + ret = serial8250_register_8250_port(&up); if (ret < 0) { if (ret != -EPROBE_DEFER) dev_err(&pdev->dev, -- cgit v1.2.3