From bb58b89c5ea1006c93270fd2e667ab72312bf7ab Mon Sep 17 00:00:00 2001 From: Peter Oh Date: Tue, 24 Nov 2015 09:37:35 -0800 Subject: ath10k: apply Mesh subtype when Mesh interface created. QCA988X firmware starting from 10.2.4.70.12-2 has capability to support Mesh Control Field Present bit in QoS field in native Wi-Fi mode. Hence apply Mesh subtype according to the WMI service map. Firmware will allows unicast, broadcast, multicast, and WDS frame (FromDS = 1 and ToDS = 1) to be received via the interface, once Mesh subtype is used. The firmware and this patch together make native Wi-Fi mode comply to IEEE802.11s Mesh frame in open mode, but the firmware doesn't yet support secured Mesh mode. Signed-off-by: Peter Oh Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index de19967c64ce..8ae5216fd188 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -4364,7 +4364,9 @@ static int ath10k_add_interface(struct ieee80211_hw *hw, arvif->vdev_type = WMI_VDEV_TYPE_IBSS; break; case NL80211_IFTYPE_MESH_POINT: - if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) { + if (test_bit(WMI_SERVICE_MESH, ar->wmi.svc_map)) { + arvif->vdev_subtype = WMI_VDEV_SUBTYPE_MESH; + } else if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) { ret = -EINVAL; ath10k_warn(ar, "must load driver with rawmode=1 to add mesh interfaces\n"); goto err; -- cgit v1.2.3