From 3354313e504ab51d620388fb230e17cd9097388c Mon Sep 17 00:00:00 2001 From: Walter Lozano Date: Fri, 3 Oct 2014 15:09:01 -0300 Subject: Altera TSE: Add support for no PHY This patch avoids PHY and MDIO probing if no PHY chip is present. This is the case mainly in optical links where there is no need for PHY chip, and therefore no need of MDIO. In this scenario Ethernet MAC is directly connected to an optical module through an external SFP transceiver. Signed-off-by: Walter Lozano Signed-off-by: David S. Miller --- drivers/net/ethernet/altera/altera_tse_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net/ethernet/altera') diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c index 95a30a30f7ff..4efc4355d345 100644 --- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -736,6 +736,10 @@ static int altera_tse_phy_get_addr_mdio_create(struct net_device *dev) priv->phy_iface = of_get_phy_mode(np); + /* Avoid get phy addr and create mdio if no phy is present */ + if (!priv->phy_iface) + return 0; + /* try to get PHY address from device tree, use PHY autodetection if * no valid address is given */ @@ -770,6 +774,10 @@ static int init_phy(struct net_device *dev) struct phy_device *phydev; struct device_node *phynode; + /* Avoid init phy in case of no phy present */ + if (!priv->phy_iface) + return 0; + priv->oldlink = 0; priv->oldspeed = 0; priv->oldduplex = -1; -- cgit v1.2.3