From c01674e75a4193d1e23f509689e676634f067a0b Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Mon, 7 Oct 2019 10:28:53 -0300 Subject: media: ad5820: Add support for enable pin This patch adds support for a programmable enable pin. It can be used in situations where the ANA-vcc is not configurable (dummy-regulator), or just to have a more fine control of the power saving. The use of the enable pin is optional. Signed-off-by: Ricardo Ribalda Delgado Acked-by: Pavel Machek Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/Kconfig | 2 +- drivers/media/i2c/ad5820.c | 17 +++++++++++++++++ 2 files changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers/media/i2c') diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 78dc64d7b0e7..30d460844dff 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -975,7 +975,7 @@ if MEDIA_CAMERA_SUPPORT config VIDEO_AD5820 tristate "AD5820 lens voice coil support" - depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on GPIOLIB && I2C && VIDEO_V4L2 && MEDIA_CONTROLLER help This is a driver for the AD5820 camera lens voice coil. It is used for example in Nokia N900 (RX-51). diff --git a/drivers/media/i2c/ad5820.c b/drivers/media/i2c/ad5820.c index 7a49651f4d1f..76aab651f217 100644 --- a/drivers/media/i2c/ad5820.c +++ b/drivers/media/i2c/ad5820.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -47,6 +48,8 @@ struct ad5820_device { u32 focus_ramp_time; u32 focus_ramp_mode; + struct gpio_desc *enable_gpio; + struct mutex power_lock; int power_count; @@ -114,6 +117,8 @@ static int ad5820_power_off(struct ad5820_device *coil, bool standby) ret = ad5820_update_hw(coil); } + gpiod_set_value_cansleep(coil->enable_gpio, 0); + ret2 = regulator_disable(coil->vana); if (ret) return ret; @@ -128,6 +133,8 @@ static int ad5820_power_on(struct ad5820_device *coil, bool restore) if (ret < 0) return ret; + gpiod_set_value_cansleep(coil->enable_gpio, 1); + if (restore) { /* Restore the hardware settings. */ coil->standby = false; @@ -138,6 +145,7 @@ static int ad5820_power_on(struct ad5820_device *coil, bool restore) return 0; fail: + gpiod_set_value_cansleep(coil->enable_gpio, 0); coil->standby = true; regulator_disable(coil->vana); @@ -304,6 +312,15 @@ static int ad5820_probe(struct i2c_client *client, return ret; } + coil->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", + GPIOD_OUT_LOW); + if (IS_ERR(coil->enable_gpio)) { + ret = PTR_ERR(coil->enable_gpio); + if (ret != -EPROBE_DEFER) + dev_err(&client->dev, "could not get enable gpio\n"); + return ret; + } + mutex_init(&coil->power_lock); v4l2_i2c_subdev_init(&coil->subdev, client, &ad5820_ops); -- cgit v1.2.3