From aa3d4409b664813ceb86a24bd09458cdd29cbb8a Mon Sep 17 00:00:00 2001 From: Martin Kepplinger Date: Mon, 22 May 2017 17:19:45 -0700 Subject: Input: edt-ft5x06 - increase allowed data range for threshold parameter The datasheet and application note does not mention an allowed range for the M09_REGISTER_THRESHOLD parameter. One of our customers needs to set lower values than 20 and they seem to work just fine on EDT EP0xx0M09 with T5x06 touch. So, lacking a known lower limit, we increase the range for thresholds, and set the lower limit to 0. The documentation is updated accordingly. Signed-off-by: Schoefegger Stefan Signed-off-by: Manfred Schlaegl Signed-off-by: Martin Kepplinger Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/edt-ft5x06.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 8cf8d8d5d4ef..f872817e81e4 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -471,7 +471,7 @@ static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN, static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET, M09_REGISTER_OFFSET, 0, 31); static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD, - M09_REGISTER_THRESHOLD, 20, 80); + M09_REGISTER_THRESHOLD, 0, 80); static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE, NO_REGISTER, 3, 14); -- cgit v1.2.3 From 089b50d95948f691589cca4d81f1f8761747dbaa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Maxime=20Roussin-B=C3=A9langer?= Date: Fri, 19 May 2017 14:59:03 -0700 Subject: Input: atmel_mxt_ts - add T100 as a readable object MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When using the 'object' sysfs attribute, T100 is not displayed in the output. Signed-off-by: Maxime Roussin-Bélanger Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/atmel_mxt_ts.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 2302aef2b2d4..dd042a9b0aaa 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -350,6 +350,7 @@ static bool mxt_object_readable(unsigned int type) case MXT_TOUCH_KEYARRAY_T15: case MXT_TOUCH_PROXIMITY_T23: case MXT_TOUCH_PROXKEY_T52: + case MXT_TOUCH_MULTITOUCHSCREEN_T100: case MXT_PROCI_GRIPFACE_T20: case MXT_PROCG_NOISE_T22: case MXT_PROCI_ONETOUCH_T24: -- cgit v1.2.3 From 4b3c7dbbfff0673e8a89575414b864d8b001d3bb Mon Sep 17 00:00:00 2001 From: KT Liao Date: Thu, 25 May 2017 10:06:21 -0700 Subject: Input: elan_i2c - clear INT before resetting controller Some old touchpad FWs need to have interrupt cleared before issuing reset command after updating firmware. We clear interrupt by attempting to read full report from the controller, and discarding any data read. Signed-off-by: KT Liao Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_i2c.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c index a679e56c44cd..765879dcaf85 100644 --- a/drivers/input/mouse/elan_i2c_i2c.c +++ b/drivers/input/mouse/elan_i2c_i2c.c @@ -557,7 +557,14 @@ static int elan_i2c_finish_fw_update(struct i2c_client *client, long ret; int error; int len; - u8 buffer[ETP_I2C_INF_LENGTH]; + u8 buffer[ETP_I2C_REPORT_LEN]; + + len = i2c_master_recv(client, buffer, ETP_I2C_REPORT_LEN); + if (len != ETP_I2C_REPORT_LEN) { + error = len < 0 ? len : -EIO; + dev_warn(dev, "failed to read I2C data after FW WDT reset: %d (%d)\n", + error, len); + } reinit_completion(completion); enable_irq(client->irq); -- cgit v1.2.3 From a04f144059ac09f2c3da50b5707df589044aad66 Mon Sep 17 00:00:00 2001 From: KT Liao Date: Tue, 23 May 2017 13:41:47 -0700 Subject: Input: elan_i2c - ignore signals when finishing updating firmware Use wait_for_completion_timeout() instead of wait_for_completion_interruptible_timeout() to avoid stray signals ruining firmware update. Our timeout is only 300 msec so we are fine simply letting it expire in case device misbehaves. Signed-off-by: KT Liao Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_i2c.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c index 765879dcaf85..f431da07f861 100644 --- a/drivers/input/mouse/elan_i2c_i2c.c +++ b/drivers/input/mouse/elan_i2c_i2c.c @@ -554,7 +554,6 @@ static int elan_i2c_finish_fw_update(struct i2c_client *client, struct completion *completion) { struct device *dev = &client->dev; - long ret; int error; int len; u8 buffer[ETP_I2C_REPORT_LEN]; @@ -570,23 +569,19 @@ static int elan_i2c_finish_fw_update(struct i2c_client *client, enable_irq(client->irq); error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET); - if (!error) - ret = wait_for_completion_interruptible_timeout(completion, - msecs_to_jiffies(300)); - disable_irq(client->irq); - if (error) { dev_err(dev, "device reset failed: %d\n", error); - return error; - } else if (ret == 0) { + } else if (!wait_for_completion_timeout(completion, + msecs_to_jiffies(300))) { dev_err(dev, "timeout waiting for device reset\n"); - return -ETIMEDOUT; - } else if (ret < 0) { - error = ret; - dev_err(dev, "error waiting for device reset: %d\n", error); - return error; + error = -ETIMEDOUT; } + disable_irq(client->irq); + + if (error) + return error; + len = i2c_master_recv(client, buffer, ETP_I2C_INF_LENGTH); if (len != ETP_I2C_INF_LENGTH) { error = len < 0 ? len : -EIO; -- cgit v1.2.3