From a306a65f46acb040d208523592a2d34f67d47a61 Mon Sep 17 00:00:00 2001 From: Pavel Rojtberg Date: Tue, 6 Oct 2015 17:07:31 -0700 Subject: Input: xpad - remove needless bulk out URB used for LED setup This code was probably wrong ever since and is redundant with xpad_send_led_command. Both try to send a similar command to the xbox360 controller. However xpad_send_led_command correctly uses the pad_nr instead of bInterfaceNumber to select the led and re-uses the irq_out URB instead of creating a new one. Note that this change only affects the two supported wireless controllers. Tested using the xbox360 wireless controller (PC). Signed-off-by: Pavel Rojtberg Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 79 +------------------------------------------ 1 file changed, 1 insertion(+), 78 deletions(-) (limited to 'drivers/input/joystick') diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 9e85a234d5f1..946bf3c74834 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -328,9 +328,6 @@ struct usb_xpad { unsigned char *idata; /* input data */ dma_addr_t idata_dma; - struct urb *bulk_out; - unsigned char *bdata; - struct urb *irq_out; /* urb for interrupt out report */ unsigned char *odata; /* output data */ dma_addr_t odata_dma; @@ -510,7 +507,6 @@ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned cha if (data[0] & 0x08) { if (data[1] & 0x80) { xpad->pad_present = 1; - usb_submit_urb(xpad->bulk_out, GFP_ATOMIC); /* * Light up the segment corresponding to * controller number. @@ -672,28 +668,6 @@ exit: __func__, retval); } -static void xpad_bulk_out(struct urb *urb) -{ - struct usb_xpad *xpad = urb->context; - struct device *dev = &xpad->intf->dev; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dev_dbg(dev, "%s - urb shutting down with status: %d\n", - __func__, urb->status); - break; - default: - dev_dbg(dev, "%s - nonzero urb status received: %d\n", - __func__, urb->status); - } -} - static void xpad_irq_out(struct urb *urb) { struct usb_xpad *xpad = urb->context; @@ -1229,52 +1203,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id usb_set_intfdata(intf, xpad); if (xpad->xtype == XTYPE_XBOX360W) { - /* - * Setup the message to set the LEDs on the - * controller when it shows up - */ - xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL); - if (!xpad->bulk_out) { - error = -ENOMEM; - goto fail7; - } - - xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL); - if (!xpad->bdata) { - error = -ENOMEM; - goto fail8; - } - - xpad->bdata[2] = 0x08; - switch (intf->cur_altsetting->desc.bInterfaceNumber) { - case 0: - xpad->bdata[3] = 0x42; - break; - case 2: - xpad->bdata[3] = 0x43; - break; - case 4: - xpad->bdata[3] = 0x44; - break; - case 6: - xpad->bdata[3] = 0x45; - } - - ep_irq_in = &intf->cur_altsetting->endpoint[1].desc; - if (usb_endpoint_is_bulk_out(ep_irq_in)) { - usb_fill_bulk_urb(xpad->bulk_out, udev, - usb_sndbulkpipe(udev, - ep_irq_in->bEndpointAddress), - xpad->bdata, XPAD_PKT_LEN, - xpad_bulk_out, xpad); - } else { - usb_fill_int_urb(xpad->bulk_out, udev, - usb_sndintpipe(udev, - ep_irq_in->bEndpointAddress), - xpad->bdata, XPAD_PKT_LEN, - xpad_bulk_out, xpad, 0); - } - /* * Submit the int URB immediately rather than waiting for open * because we get status messages from the device whether @@ -1285,13 +1213,11 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id xpad->irq_in->dev = xpad->udev; error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); if (error) - goto fail9; + goto fail7; } return 0; - fail9: kfree(xpad->bdata); - fail8: usb_free_urb(xpad->bulk_out); fail7: input_unregister_device(input_dev); input_dev = NULL; fail6: xpad_led_disconnect(xpad); @@ -1315,8 +1241,6 @@ static void xpad_disconnect(struct usb_interface *intf) xpad_deinit_output(xpad); if (xpad->xtype == XTYPE_XBOX360W) { - usb_kill_urb(xpad->bulk_out); - usb_free_urb(xpad->bulk_out); usb_kill_urb(xpad->irq_in); } @@ -1324,7 +1248,6 @@ static void xpad_disconnect(struct usb_interface *intf) usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); - kfree(xpad->bdata); kfree(xpad); usb_set_intfdata(intf, NULL); -- cgit v1.2.3