From da9c99fc32e2d84f80672d192a7aaf7239057a2e Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Tue, 23 Mar 2010 17:28:28 +0100 Subject: i2c-imx: fix error handling - Return -ETIMEDOUT on bus busy error - Fix timeout test "time_after(jiffies, orig_jiffies + HZ / 1000)" : By default, HZ=100 on arm. This means that this test has no chances to work and may result in a dead loop. Set timeout to 500ms. - Don't try to send a new message if we failed to transmit previous one. This was preventing to recover from error on my system Signed-off-by: Arnaud Patard Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-imx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index f7e27b702375..d1ff9408dc1f 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -146,10 +146,10 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) "<%s> I2C Interrupted\n", __func__); return -EINTR; } - if (time_after(jiffies, orig_jiffies + HZ / 1000)) { + if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) { dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C bus is busy\n", __func__); - return -EIO; + return -ETIMEDOUT; } schedule(); } @@ -444,6 +444,8 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, result = i2c_imx_read(i2c_imx, &msgs[i]); else result = i2c_imx_write(i2c_imx, &msgs[i]); + if (result) + goto fail0; } fail0: -- cgit v1.2.3 From 7c6bd2010fced38444c9fd658f4c6ce61bd185bf Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 23 Mar 2010 12:12:56 +0200 Subject: i2c-omap: fix OOPS in omap_i2c_unidle() during probe Commit d84d3ea317ce0db89ce0903b4037f800c5d4c477 added register shift to allow also 16-bit register access. However, omap_i2c_unidle() is called before these are set which causes the following OOPS: Unhandled fault: alignment exception (0x801) at 0xfa070009 Internal error: : 801 [#1] last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.34-rc2-00052-gae6be51 #3) PC is at omap_i2c_unidle+0x44/0x138 LR is at trace_hardirqs_on_caller+0x158/0x18c pc : [] lr : [] psr: 20000013 sp : cfc2bf10 ip : 00000009 fp : 00000000 r10: 00000000 r9 : 00000000 r8 : c0378560 r7 : c0378b88 r6 : c0378558 r5 : cfcadc00 r4 : cfcadc00 r3 : 00000009 r2 : fa070000 r1 : 00000000 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387f Table: 80004019 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xcfc2a2e8) Stack: (0xcfc2bf10 to 0xcfc2c000) bf00: c0372cf8 c027225c 00000000 c0a69678 bf20: cfc3e508 c0500898 c0378560 c0378560 c0500898 cfcac8c0 c04fc280 c017d4f4 bf40: c0378560 c017c63c c0378560 c0378594 c0500898 cfcac8c0 c04fc280 c017c754 bf60: 00000000 c017c6f4 c0500898 c017beac cfc16a5c cfc3fd94 c0023448 c0500898 bf80: c0500898 c017b7d4 c032dc7f 00000093 cfc28d40 c0023448 00000000 c0500898 bfa0: 00000000 00000000 00000000 c017ca48 c0023448 00000000 c001d274 00000000 bfc0: 00000000 c002b344 00000031 00000000 00000000 00000192 00000000 c0023448 bfe0: 00000000 00000000 00000000 c0008578 00000000 c002c304 ffdfffff ffffffff [] (omap_i2c_unidle+0x44/0x138) from [] (omap_i2c_probe+0x1a4/0x398) [] (omap_i2c_probe+0x1a4/0x398) from [] (platform_drv_probe+0x18/0x1c) [] (platform_drv_probe+0x18/0x1c) from [] (driver_probe_device+0xc0/0x178) [] (driver_probe_device+0xc0/0x178) from [] (__driver_attach+0x60/0x84) [] (__driver_attach+0x60/0x84) from [] (bus_for_each_dev+0x44/0x74) [] (bus_for_each_dev+0x44/0x74) from [] (bus_add_driver+0x9c/0x218) [] (bus_add_driver+0x9c/0x218) from [] (driver_register+0xa8/0x130) [] (driver_register+0xa8/0x130) from [] (do_one_initcall+0x5c/0x1b8) [] (do_one_initcall+0x5c/0x1b8) from [] (kernel_init+0x90/0x144) [] (kernel_init+0x90/0x144) from [] (kernel_thread_exit+0x0/0x8) Code: e5942004 e3a0c009 e1a0331c e3a01000 (e18210b3) ---[ end trace 1b75b31a2719ed1c ]--- This patch moves register shift setting before any register accesses are done. Signed-off-by: Mika Westerberg Cc: Cory Maccarrone Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6bd0f19cd451..389ac6032a7b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -903,6 +903,11 @@ omap_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dev); + if (cpu_is_omap7xx()) + dev->reg_shift = 1; + else + dev->reg_shift = 2; + if ((r = omap_i2c_get_clocks(dev)) != 0) goto err_iounmap; @@ -926,11 +931,6 @@ omap_i2c_probe(struct platform_device *pdev) dev->b_hw = 1; /* Enable hardware fixes */ } - if (cpu_is_omap7xx()) - dev->reg_shift = 1; - else - dev->reg_shift = 2; - /* reset ASAP, clearing any IRQs */ omap_i2c_init(dev); -- cgit v1.2.3 From be80dbaa3ed64337693be58fb2f3808e78911ba6 Mon Sep 17 00:00:00 2001 From: Kevin Wells Date: Tue, 16 Mar 2010 15:55:36 -0700 Subject: i2c-pnx: Limit maximum divider to 1023 Limit maximum divider to 0x3ff to divider computations. On high I2C parent clock rates, the divider can exceed 0x3ff. This will help prevent some very odd clock rates. Signed-off-by: Kevin Wells Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-pnx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 247103372a06..68fa415d9ad5 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -633,6 +633,8 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) */ tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2; + if (tmp > 0x3FF) + tmp = 0x3FF; iowrite32(tmp, I2C_REG_CKH(alg_data)); iowrite32(tmp, I2C_REG_CKL(alg_data)); -- cgit v1.2.3 From 28ad3321a1ac732c7fe37d5be85f67fe40ef18a9 Mon Sep 17 00:00:00 2001 From: Kevin Wells Date: Tue, 16 Mar 2010 15:55:37 -0700 Subject: i2c-pnx: Add stop conditions for end of transfer Add a stop condition bit flag to the last byte in the transfer. This will generate an extra clock to handle the stop condition and prevent devices from staying in an ACK'd state. Signed-off-by: Kevin Wells Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-pnx.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 68fa415d9ad5..a97e3fec8148 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -173,6 +173,9 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data) /* We still have something to talk about... */ val = *alg_data->mif.buf++; + if (alg_data->mif.len == 1) + val |= stop_bit; + alg_data->mif.len--; iowrite32(val, I2C_REG_TX(alg_data)); @@ -246,6 +249,9 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data) __func__); if (alg_data->mif.len == 1) { + /* Last byte, do not acknowledge next rcv. */ + val |= stop_bit; + /* * Enable interrupt RFDAIE (data in Rx fifo), * and disable DRMIE (need data for Tx) -- cgit v1.2.3 From 42df64b1f83fa9b786067a0b5a3aca0fbb2d8db8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 7 Apr 2010 12:22:58 +0300 Subject: i2c-stu300: off by one issue If we don't find the correct rate, we want to end the loop with "i" pointing to the last element in the array. Signed-off-by: Dan Carpenter Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-stu300.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 1f5b38be73bc..495be451d326 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -498,7 +498,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate) int i = 0; /* Locate the apropriate clock setting */ - while (i < ARRAY_SIZE(stu300_clktable) && + while (i < ARRAY_SIZE(stu300_clktable) - 1 && stu300_clktable[i].rate < clkrate) i++; -- cgit v1.2.3 From 20f12160607c09e299a3e93c7bf4d75e8801c9b7 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 8 Mar 2010 11:04:21 -0800 Subject: I2C: Fix section mismatch errors in i2c-octeon.c Signed-off-by: David Daney To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: linux-mips@linux-mips.org Cc: rade.bozic.ext@nsn.com Patchwork: http://patchwork.linux-mips.org/patch/1037/ Signed-off-by: Ralf Baechle --- drivers/i2c/busses/i2c-octeon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index a2481f40ea1c..0e9f85d0a835 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -447,7 +447,7 @@ static struct i2c_adapter octeon_i2c_ops = { /** * octeon_i2c_setclock - Calculate and set clock divisors. */ -static int __init octeon_i2c_setclock(struct octeon_i2c *i2c) +static int __devinit octeon_i2c_setclock(struct octeon_i2c *i2c) { int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff; int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000; @@ -490,7 +490,7 @@ static int __init octeon_i2c_setclock(struct octeon_i2c *i2c) return 0; } -static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c) +static int __devinit octeon_i2c_initlowlevel(struct octeon_i2c *i2c) { u8 status; int tries; -- cgit v1.2.3 From ceade897f31b8bb66f378cc35859fcfd0d46aaa2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 11 Feb 2010 21:44:53 +0000 Subject: ARM: Add Versatile Express support Signed-off-by: Russell King --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 9c6170cd9aac..87ab0568bb0e 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -564,7 +564,7 @@ config I2C_STU300 config I2C_VERSATILE tristate "ARM Versatile/Realview I2C bus support" - depends on ARCH_VERSATILE || ARCH_REALVIEW + depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS select I2C_ALGOBIT help Say yes if you want to support the I2C serial bus on ARMs Versatile -- cgit v1.2.3