From 710b65335c19eea696741eb2d5e45a39aa23d0bb Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 13 Jan 2020 22:06:41 +0100 Subject: i2c: parport-light: remove driver The justification of a light version of the parport driver was less overhead for embedded systems. Well, today, even if an embedded system still has a parport, it surely can handle the fully-fledged parport driver. Remove it to reduce the maintenance burden. Signed-off-by: Wolfram Sang Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-parport-light.c | 267 --------------------------------- 1 file changed, 267 deletions(-) delete mode 100644 drivers/i2c/busses/i2c-parport-light.c (limited to 'drivers/i2c/busses/i2c-parport-light.c') diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c deleted file mode 100644 index 00f6aaf22cfc..000000000000 --- a/drivers/i2c/busses/i2c-parport-light.c +++ /dev/null @@ -1,267 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* ------------------------------------------------------------------------ * - * i2c-parport-light.c I2C bus over parallel port * - * ------------------------------------------------------------------------ * - Copyright (C) 2003-2010 Jean Delvare - - Based on older i2c-velleman.c driver - Copyright (C) 1995-2000 Simon G. Vogl - With some changes from: - Frodo Looijaard - Kyösti Mälkki - - * ------------------------------------------------------------------------ */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "i2c-parport.h" - -#define DEFAULT_BASE 0x378 -#define DRVNAME "i2c-parport-light" - -static struct platform_device *pdev; - -static u16 base; -module_param_hw(base, ushort, ioport, 0); -MODULE_PARM_DESC(base, "Base I/O address"); - -static int irq; -module_param_hw(irq, int, irq, 0); -MODULE_PARM_DESC(irq, "IRQ (optional)"); - -/* ----- Low-level parallel port access ----------------------------------- */ - -static inline void port_write(unsigned char p, unsigned char d) -{ - outb(d, base+p); -} - -static inline unsigned char port_read(unsigned char p) -{ - return inb(base+p); -} - -/* ----- Unified line operation functions --------------------------------- */ - -static inline void line_set(int state, const struct lineop *op) -{ - u8 oldval = port_read(op->port); - - /* Touch only the bit(s) needed */ - if ((op->inverted && !state) || (!op->inverted && state)) - port_write(op->port, oldval | op->val); - else - port_write(op->port, oldval & ~op->val); -} - -static inline int line_get(const struct lineop *op) -{ - u8 oldval = port_read(op->port); - - return ((op->inverted && (oldval & op->val) != op->val) - || (!op->inverted && (oldval & op->val) == op->val)); -} - -/* ----- I2C algorithm call-back functions and structures ----------------- */ - -static void parport_setscl(void *data, int state) -{ - line_set(state, &adapter_parm[type].setscl); -} - -static void parport_setsda(void *data, int state) -{ - line_set(state, &adapter_parm[type].setsda); -} - -static int parport_getscl(void *data) -{ - return line_get(&adapter_parm[type].getscl); -} - -static int parport_getsda(void *data) -{ - return line_get(&adapter_parm[type].getsda); -} - -/* Encapsulate the functions above in the correct structure - Note that getscl will be set to NULL by the attaching code for adapters - that cannot read SCL back */ -static struct i2c_algo_bit_data parport_algo_data = { - .setsda = parport_setsda, - .setscl = parport_setscl, - .getsda = parport_getsda, - .getscl = parport_getscl, - .udelay = 50, - .timeout = HZ, -}; - -/* ----- Driver registration ---------------------------------------------- */ - -static struct i2c_adapter parport_adapter = { - .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON, - .algo_data = &parport_algo_data, - .name = "Parallel port adapter (light)", -}; - -/* SMBus alert support */ -static struct i2c_smbus_alert_setup alert_data = { -}; -static struct i2c_client *ara; -static struct lineop parport_ctrl_irq = { - .val = (1 << 4), - .port = PORT_CTRL, -}; - -static int i2c_parport_probe(struct platform_device *pdev) -{ - int err; - - /* Reset hardware to a sane state (SCL and SDA high) */ - parport_setsda(NULL, 1); - parport_setscl(NULL, 1); - /* Other init if needed (power on...) */ - if (adapter_parm[type].init.val) { - line_set(1, &adapter_parm[type].init); - /* Give powered devices some time to settle */ - msleep(100); - } - - parport_adapter.dev.parent = &pdev->dev; - err = i2c_bit_add_bus(&parport_adapter); - if (err) { - dev_err(&pdev->dev, "Unable to register with I2C\n"); - return err; - } - - /* Setup SMBus alert if supported */ - if (adapter_parm[type].smbus_alert && irq) { - alert_data.irq = irq; - ara = i2c_setup_smbus_alert(&parport_adapter, &alert_data); - if (ara) - line_set(1, &parport_ctrl_irq); - else - dev_warn(&pdev->dev, "Failed to register ARA client\n"); - } - - return 0; -} - -static int i2c_parport_remove(struct platform_device *pdev) -{ - if (ara) { - line_set(0, &parport_ctrl_irq); - i2c_unregister_device(ara); - ara = NULL; - } - i2c_del_adapter(&parport_adapter); - - /* Un-init if needed (power off...) */ - if (adapter_parm[type].init.val) - line_set(0, &adapter_parm[type].init); - - return 0; -} - -static struct platform_driver i2c_parport_driver = { - .driver = { - .name = DRVNAME, - }, - .probe = i2c_parport_probe, - .remove = i2c_parport_remove, -}; - -static int __init i2c_parport_device_add(u16 address) -{ - int err; - - pdev = platform_device_alloc(DRVNAME, -1); - if (!pdev) { - err = -ENOMEM; - printk(KERN_ERR DRVNAME ": Device allocation failed\n"); - goto exit; - } - - err = platform_device_add(pdev); - if (err) { - printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", - err); - goto exit_device_put; - } - - return 0; - -exit_device_put: - platform_device_put(pdev); -exit: - return err; -} - -static int __init i2c_parport_init(void) -{ - int err; - - if (type < 0) { - printk(KERN_ERR DRVNAME ": adapter type unspecified\n"); - return -ENODEV; - } - - if (type >= ARRAY_SIZE(adapter_parm)) { - printk(KERN_ERR DRVNAME ": invalid type (%d)\n", type); - return -ENODEV; - } - - if (base == 0) { - pr_info(DRVNAME ": using default base 0x%x\n", DEFAULT_BASE); - base = DEFAULT_BASE; - } - - if (!request_region(base, 3, DRVNAME)) - return -EBUSY; - - if (irq != 0) - pr_info(DRVNAME ": using irq %d\n", irq); - - if (!adapter_parm[type].getscl.val) - parport_algo_data.getscl = NULL; - - /* Sets global pdev as a side effect */ - err = i2c_parport_device_add(base); - if (err) - goto exit_release; - - err = platform_driver_register(&i2c_parport_driver); - if (err) - goto exit_device; - - return 0; - -exit_device: - platform_device_unregister(pdev); -exit_release: - release_region(base, 3); - return err; -} - -static void __exit i2c_parport_exit(void) -{ - platform_driver_unregister(&i2c_parport_driver); - platform_device_unregister(pdev); - release_region(base, 3); -} - -MODULE_AUTHOR("Jean Delvare "); -MODULE_DESCRIPTION("I2C bus over parallel port (light)"); -MODULE_LICENSE("GPL"); - -module_init(i2c_parport_init); -module_exit(i2c_parport_exit); -- cgit v1.2.3