From a0d65009411c620a9e7140d6a83b9d5aeb8f1801 Mon Sep 17 00:00:00 2001 From: "Maciej S. Szmigiero" Date: Sat, 6 Jan 2018 00:46:08 +0100 Subject: gpio: winbond: Add driver This commit adds GPIO driver for Winbond Super I/Os. Currently, only W83627UHG model (also known as Nuvoton NCT6627UD) is supported but in the future a support for other Winbond models, too, can be added to the driver. A module parameter "gpios" sets a bitmask of GPIO ports to enable (bit 0 is GPIO1, bit 1 is GPIO2, etc.). One should be careful which ports one tinkers with since some might be managed by the firmware (for functions like powering on and off, sleeping, BIOS recovery, etc.) and some of GPIO port pins are physically shared with other devices included in the Super I/O chip. Signed-off-by: Maciej S. Szmigiero Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/gpio/Kconfig') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 395669bfcc26..8c4018855c3b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -698,6 +698,22 @@ config GPIO_TS5500 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 LCD port. +config GPIO_WINBOND + tristate "Winbond Super I/O GPIO support" + select ISA_BUS_API + help + This option enables support for GPIOs found on Winbond Super I/O + chips. + Currently, only W83627UHG (also known as Nuvoton NCT6627UD) is + supported. + + You will need to provide a module parameter "gpios", or a + boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO + ports to enable (bit 0 is GPIO1, bit 1 is GPIO2, etc.). + + To compile this driver as a module, choose M here: the module will + be called gpio-winbond. + config GPIO_WS16C48 tristate "WinSystems WS16C48 GPIO support" depends on ISA_BUS_API -- cgit v1.2.3