From 5d4879cda67b09f086807821cf594ee079d6dfbe Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 19 Sep 2013 16:03:50 -0500 Subject: PM / OPP: rename functions to dev_pm_opp* Since Operating Performance Points (OPP) functions are specific to device specific power management, be specific and rename opp_* accessors in OPP library with dev_pm_opp_* equivalent. Affected functions are: opp_get_voltage opp_get_freq opp_get_opp_count opp_find_freq_exact opp_find_freq_floor opp_find_freq_ceil opp_add opp_enable opp_disable opp_get_notifier opp_init_cpufreq_table opp_free_cpufreq_table Reported-by: Randy Dunlap Signed-off-by: Nishanth Menon Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 82 ++++++++++++++++++++++++------------------------ 1 file changed, 41 insertions(+), 41 deletions(-) (limited to 'drivers/base') diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index ef89897c6043..00c6a449cdeb 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -136,7 +136,7 @@ static struct device_opp *find_device_opp(struct device *dev) } /** - * opp_get_voltage() - Gets the voltage corresponding to an available opp + * dev_pm_opp_get_voltage() - Gets the voltage corresponding to an available opp * @opp: opp for which voltage has to be returned for * * Return voltage in micro volt corresponding to the opp, else @@ -150,7 +150,7 @@ static struct device_opp *find_device_opp(struct device *dev) * prior to unlocking with rcu_read_unlock() to maintain the integrity of the * pointer. */ -unsigned long opp_get_voltage(struct opp *opp) +unsigned long dev_pm_opp_get_voltage(struct opp *opp) { struct opp *tmp_opp; unsigned long v = 0; @@ -163,10 +163,10 @@ unsigned long opp_get_voltage(struct opp *opp) return v; } -EXPORT_SYMBOL_GPL(opp_get_voltage); +EXPORT_SYMBOL_GPL(dev_pm_opp_get_voltage); /** - * opp_get_freq() - Gets the frequency corresponding to an available opp + * dev_pm_opp_get_freq() - Gets the frequency corresponding to an available opp * @opp: opp for which frequency has to be returned for * * Return frequency in hertz corresponding to the opp, else @@ -180,7 +180,7 @@ EXPORT_SYMBOL_GPL(opp_get_voltage); * prior to unlocking with rcu_read_unlock() to maintain the integrity of the * pointer. */ -unsigned long opp_get_freq(struct opp *opp) +unsigned long dev_pm_opp_get_freq(struct opp *opp) { struct opp *tmp_opp; unsigned long f = 0; @@ -193,10 +193,10 @@ unsigned long opp_get_freq(struct opp *opp) return f; } -EXPORT_SYMBOL_GPL(opp_get_freq); +EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); /** - * opp_get_opp_count() - Get number of opps available in the opp list + * dev_pm_opp_get_opp_count() - Get number of opps available in the opp list * @dev: device for which we do this operation * * This function returns the number of available opps if there are any, @@ -206,7 +206,7 @@ EXPORT_SYMBOL_GPL(opp_get_freq); * internally references two RCU protected structures: device_opp and opp which * are safe as long as we are under a common RCU locked section. */ -int opp_get_opp_count(struct device *dev) +int dev_pm_opp_get_opp_count(struct device *dev) { struct device_opp *dev_opp; struct opp *temp_opp; @@ -226,10 +226,10 @@ int opp_get_opp_count(struct device *dev) return count; } -EXPORT_SYMBOL_GPL(opp_get_opp_count); +EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count); /** - * opp_find_freq_exact() - search for an exact frequency + * dev_pm_opp_find_freq_exact() - search for an exact frequency * @dev: device for which we do this operation * @freq: frequency to search for * @available: true/false - match for available opp @@ -254,7 +254,7 @@ EXPORT_SYMBOL_GPL(opp_get_opp_count); * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ -struct opp *opp_find_freq_exact(struct device *dev, unsigned long freq, +struct opp *dev_pm_opp_find_freq_exact(struct device *dev, unsigned long freq, bool available) { struct device_opp *dev_opp; @@ -277,10 +277,10 @@ struct opp *opp_find_freq_exact(struct device *dev, unsigned long freq, return opp; } -EXPORT_SYMBOL_GPL(opp_find_freq_exact); +EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact); /** - * opp_find_freq_ceil() - Search for an rounded ceil freq + * dev_pm_opp_find_freq_ceil() - Search for an rounded ceil freq * @dev: device for which we do this operation * @freq: Start frequency * @@ -300,7 +300,7 @@ EXPORT_SYMBOL_GPL(opp_find_freq_exact); * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ -struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq) +struct opp *dev_pm_opp_find_freq_ceil(struct device *dev, unsigned long *freq) { struct device_opp *dev_opp; struct opp *temp_opp, *opp = ERR_PTR(-ERANGE); @@ -324,10 +324,10 @@ struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq) return opp; } -EXPORT_SYMBOL_GPL(opp_find_freq_ceil); +EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil); /** - * opp_find_freq_floor() - Search for a rounded floor freq + * dev_pm_opp_find_freq_floor() - Search for a rounded floor freq * @dev: device for which we do this operation * @freq: Start frequency * @@ -347,7 +347,7 @@ EXPORT_SYMBOL_GPL(opp_find_freq_ceil); * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ -struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq) +struct opp *dev_pm_opp_find_freq_floor(struct device *dev, unsigned long *freq) { struct device_opp *dev_opp; struct opp *temp_opp, *opp = ERR_PTR(-ERANGE); @@ -375,17 +375,17 @@ struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq) return opp; } -EXPORT_SYMBOL_GPL(opp_find_freq_floor); +EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor); /** - * opp_add() - Add an OPP table from a table definitions + * dev_pm_opp_add() - Add an OPP table from a table definitions * @dev: device for which we do this operation * @freq: Frequency in Hz for this OPP * @u_volt: Voltage in uVolts for this OPP * * This function adds an opp definition to the opp list and returns status. * The opp is made available by default and it can be controlled using - * opp_enable/disable functions. + * dev_pm_opp_enable/disable functions. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks @@ -393,7 +393,7 @@ EXPORT_SYMBOL_GPL(opp_find_freq_floor); * that this function is *NOT* called under RCU protection or in contexts where * mutex cannot be locked. */ -int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) +int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) { struct device_opp *dev_opp = NULL; struct opp *opp, *new_opp; @@ -460,7 +460,7 @@ int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_ADD, new_opp); return 0; } -EXPORT_SYMBOL_GPL(opp_add); +EXPORT_SYMBOL_GPL(dev_pm_opp_add); /** * opp_set_availability() - helper to set the availability of an opp @@ -552,13 +552,13 @@ unlock: } /** - * opp_enable() - Enable a specific OPP + * dev_pm_opp_enable() - Enable a specific OPP * @dev: device for which we do this operation * @freq: OPP frequency to enable * * Enables a provided opp. If the operation is valid, this returns 0, else the * corresponding error value. It is meant to be used for users an OPP available - * after being temporarily made unavailable with opp_disable. + * after being temporarily made unavailable with dev_pm_opp_disable. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function indirectly uses RCU and mutex locks to keep the @@ -566,21 +566,21 @@ unlock: * this function is *NOT* called under RCU protection or in contexts where * mutex locking or synchronize_rcu() blocking calls cannot be used. */ -int opp_enable(struct device *dev, unsigned long freq) +int dev_pm_opp_enable(struct device *dev, unsigned long freq) { return opp_set_availability(dev, freq, true); } -EXPORT_SYMBOL_GPL(opp_enable); +EXPORT_SYMBOL_GPL(dev_pm_opp_enable); /** - * opp_disable() - Disable a specific OPP + * dev_pm_opp_disable() - Disable a specific OPP * @dev: device for which we do this operation * @freq: OPP frequency to disable * * Disables a provided opp. If the operation is valid, this returns * 0, else the corresponding error value. It is meant to be a temporary * control by users to make this OPP not available until the circumstances are - * right to make it available again (with a call to opp_enable). + * right to make it available again (with a call to dev_pm_opp_enable). * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function indirectly uses RCU and mutex locks to keep the @@ -588,15 +588,15 @@ EXPORT_SYMBOL_GPL(opp_enable); * this function is *NOT* called under RCU protection or in contexts where * mutex locking or synchronize_rcu() blocking calls cannot be used. */ -int opp_disable(struct device *dev, unsigned long freq) +int dev_pm_opp_disable(struct device *dev, unsigned long freq) { return opp_set_availability(dev, freq, false); } -EXPORT_SYMBOL_GPL(opp_disable); +EXPORT_SYMBOL_GPL(dev_pm_opp_disable); #ifdef CONFIG_CPU_FREQ /** - * opp_init_cpufreq_table() - create a cpufreq table for a device + * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device * @dev: device for which we do this operation * @table: Cpufreq table returned back to caller * @@ -619,7 +619,7 @@ EXPORT_SYMBOL_GPL(opp_disable); * Callers should ensure that this function is *NOT* called under RCU protection * or in contexts where mutex locking cannot be used. */ -int opp_init_cpufreq_table(struct device *dev, +int dev_pm_opp_init_cpufreq_table(struct device *dev, struct cpufreq_frequency_table **table) { struct device_opp *dev_opp; @@ -639,7 +639,7 @@ int opp_init_cpufreq_table(struct device *dev, } freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * - (opp_get_opp_count(dev) + 1), GFP_KERNEL); + (dev_pm_opp_get_opp_count(dev) + 1), GFP_KERNEL); if (!freq_table) { mutex_unlock(&dev_opp_list_lock); dev_warn(dev, "%s: Unable to allocate frequency table\n", @@ -663,16 +663,16 @@ int opp_init_cpufreq_table(struct device *dev, return 0; } -EXPORT_SYMBOL_GPL(opp_init_cpufreq_table); +EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table); /** - * opp_free_cpufreq_table() - free the cpufreq table + * dev_pm_opp_free_cpufreq_table() - free the cpufreq table * @dev: device for which we do this operation * @table: table to free * - * Free up the table allocated by opp_init_cpufreq_table + * Free up the table allocated by dev_pm_opp_init_cpufreq_table */ -void opp_free_cpufreq_table(struct device *dev, +void dev_pm_opp_free_cpufreq_table(struct device *dev, struct cpufreq_frequency_table **table) { if (!table) @@ -681,14 +681,14 @@ void opp_free_cpufreq_table(struct device *dev, kfree(*table); *table = NULL; } -EXPORT_SYMBOL_GPL(opp_free_cpufreq_table); +EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table); #endif /* CONFIG_CPU_FREQ */ /** - * opp_get_notifier() - find notifier_head of the device with opp + * dev_pm_opp_get_notifier() - find notifier_head of the device with opp * @dev: device pointer used to lookup device OPPs. */ -struct srcu_notifier_head *opp_get_notifier(struct device *dev) +struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev) { struct device_opp *dev_opp = find_device_opp(dev); @@ -732,7 +732,7 @@ int of_init_opp_table(struct device *dev) unsigned long freq = be32_to_cpup(val++) * 1000; unsigned long volt = be32_to_cpup(val++); - if (opp_add(dev, freq, volt)) { + if (dev_pm_opp_add(dev, freq, volt)) { dev_warn(dev, "%s: Failed to add OPP %ld\n", __func__, freq); continue; -- cgit v1.2.3