From 7f1931b35f0909695543a8c12f72ccd2d20ff241 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 10 Jan 2017 13:19:05 +0100 Subject: ARM: imx: hide unused variable in #ifdef A bugfix added a new local variable that is only used inside of an #ifdef section, and unused if CONFIG_PERF_EVENTS is disabled: arch/arm/mach-imx/mmdc.c:63:25: warning: 'cpuhp_mmdc_state' defined but not used [-Wunused-variable] This moves the variable down inside that same ifdef. Fixes: a051f220d6b9 ("ARM/imx/mmcd: Fix broken cpu hotplug handling") Signed-off-by: Arnd Bergmann Acked-by: Frank Li Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mmdc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index 699157759120..c03bf28d8bbc 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -60,7 +60,6 @@ #define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu) -static enum cpuhp_state cpuhp_mmdc_state; static int ddr_type; struct fsl_mmdc_devtype_data { @@ -82,6 +81,7 @@ static const struct of_device_id imx_mmdc_dt_ids[] = { #ifdef CONFIG_PERF_EVENTS +static enum cpuhp_state cpuhp_mmdc_state; static DEFINE_IDA(mmdc_ida); PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00") -- cgit v1.2.3 From 7f59b319111bbc3a5f32730c8a43b201e9522f52 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?S=C3=A9bastien=20Szymanski?= Date: Wed, 18 Jan 2017 11:09:51 +0100 Subject: ARM: dts: imx6dl: fix GPIO4 range MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GPIO4_11 is on pin 152(MX6DL_PAD_KEY_ROW2) and not on pin 151(MX6DL_PAD_KEY_ROW1). I found the error while booting a mainline kernel on APF6S SoM and noticed the following message: [ 2.609337] imx6dl-pinctrl 20e0000.iomuxc: pin MX6DL_PAD_KEY_ROW1 already requested by 20a8000.gpio:105; cannot claim for 20a8000.gpio:107 [ 2.621884] imx6dl-pinctrl 20e0000.iomuxc: pin-151 (20a8000.gpio:107) status -22 [ 2.629303] spi_imx 2008000.ecspi: Can't get CS GPIO 107 With this patch, the message is gone and spi_imx driver probes correctly. Fixes: bb728d662bed ("ARM: dts: add gpio-ranges property to iMX GPIO controllers") Signed-off-by: Sébastien Szymanski Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 1ade1951e620..7aa120fbdc71 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -137,7 +137,7 @@ &gpio4 { gpio-ranges = <&iomuxc 5 136 1>, <&iomuxc 6 145 1>, <&iomuxc 7 150 1>, <&iomuxc 8 146 1>, <&iomuxc 9 151 1>, <&iomuxc 10 147 1>, - <&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>, + <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>, <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16 39 7>, <&iomuxc 23 56 1>, <&iomuxc 24 61 7>, <&iomuxc 31 46 1>; }; -- cgit v1.2.3 From a971c5545c3d45a1e33fda6e57913bb75aaa20c9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 23 Jan 2017 14:54:10 -0200 Subject: ARM: dts: imx: Pass 'chosen' and 'memory' nodes Commit 7f107887d199 ("ARM: dts: imx: Remove skeleton.dtsi") causes boot issues when the bootloader does not create a 'chosen' node if such node is not present in the dtb. The reason for the boot failure is well explained by Javier Martinez Canillas: "the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info." , so pass an empty 'chosen' node to fix the boot problem. This issue has been seen in the kernelci reports with Barebox as bootloader. Also pass the 'memory' node in order to fix boot issues on the SolidRun iMX6 platforms. Fixes: 7f107887d199 ("ARM: dts: imx: Remove skeleton.dtsi") Reported-by: kernelci.org bot Reported-by: Russell King Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx1.dtsi | 8 ++++++++ arch/arm/boot/dts/imx23.dtsi | 8 ++++++++ arch/arm/boot/dts/imx25.dtsi | 8 ++++++++ arch/arm/boot/dts/imx27.dtsi | 8 ++++++++ arch/arm/boot/dts/imx28.dtsi | 8 ++++++++ arch/arm/boot/dts/imx31.dtsi | 8 ++++++++ arch/arm/boot/dts/imx35.dtsi | 8 ++++++++ arch/arm/boot/dts/imx50.dtsi | 8 ++++++++ arch/arm/boot/dts/imx51.dtsi | 8 ++++++++ arch/arm/boot/dts/imx53.dtsi | 8 ++++++++ arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++++++ arch/arm/boot/dts/imx6sl.dtsi | 8 ++++++++ arch/arm/boot/dts/imx6sx.dtsi | 8 ++++++++ arch/arm/boot/dts/imx6ul.dtsi | 8 ++++++++ arch/arm/boot/dts/imx7s.dtsi | 8 ++++++++ 15 files changed, 120 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index b792eee3899b..2ee40bc9ec21 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -18,6 +18,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { gpio0 = &gpio1; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index ac2a9da62b6c..43ccbbf754a3 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -16,6 +16,14 @@ #size-cells = <1>; interrupt-parent = <&icoll>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { gpio0 = &gpio0; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 831d09a28155..acd475659156 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -14,6 +14,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 9d8b5969ee3b..b397384248f4 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 3aabf65a6a52..d6a2190b60ef 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -17,6 +17,14 @@ #size-cells = <1>; interrupt-parent = <&icoll>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &mac0; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 85cd8be22f71..23b0d2cf9acd 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -12,6 +12,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { serial0 = &uart1; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 9f40e6229189..d0496c65cea2 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -13,6 +13,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index fe0221e4cbf7..ceae909e2201 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -17,6 +17,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 33526cade735..1ee1d542d9ad 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -19,6 +19,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index ca51dc03e327..2e516f4985e4 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 89b834f3fa17..e7d30f45b161 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -16,6 +16,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 19cbd879c448..cc9572ea2860 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -14,6 +14,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 10f333016197..dd4ec85ecbaa 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -15,6 +15,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { can0 = &flexcan1; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 39845a7e0463..53d3f8e41e9b 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -15,6 +15,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec1; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 8ff2cbdd8f0d..be33dfc86838 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -50,6 +50,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { gpio0 = &gpio1; -- cgit v1.2.3 From 8413299cb3933dade6186bbee8363f190032107e Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Fri, 27 Jan 2017 15:45:11 +0100 Subject: ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk Since v4.10-rc1, the following logs appears in loop : [ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 801.966611] usb usb6-port1: cannot disable (err = -32) [ 806.083772] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 806.090370] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 806.096494] usb usb6-port1: cannot disable (err = -32) After analysis, xhci try to set link in U3 and returns an error. Using snps,dis_u3_susphy_quirk fix this issue. Signed-off-by: Patrice Chotard --- arch/arm/boot/dts/stih407-family.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index c8b2944e304a..ace97e8576db 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -680,6 +680,7 @@ phy-names = "usb2-phy", "usb3-phy"; phys = <&usb2_picophy0>, <&phy_port2 PHY_TYPE_USB3>; + snps,dis_u3_susphy_quirk; }; }; -- cgit v1.2.3 From feb3cbea0946c67060e2d5bcb7499b0a6f6700fe Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 20 Jan 2017 08:20:24 -0800 Subject: ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage OdroidC2 GbE link breaks under heavy tx transfer. This happens even if the MAC does not enable Energy Efficient Ethernet (No Low Power state Idle on the Tx path). The problem seems to come from the phy Rx path, entering the LPI state. Disabling EEE advertisement on the phy prevent this feature to be negociated with the link partner and solve the issue. Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 5d28e1cdc998..c59403adb387 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -151,6 +151,18 @@ status = "okay"; pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; + phy-handle = <ð_phy0>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + reg = <0>; + eee-broken-1000t; + }; + }; }; &ir { -- cgit v1.2.3 From bba8e3f42736cf7f974968a818e53b128286ad1d Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 20 Jan 2017 08:20:25 -0800 Subject: ARM64: dts: meson-gx: Add firmware reserved memory zones MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Amlogic Meson GXBB/GXL/GXM secure monitor uses part of the memory space, this patch adds these reserved zones. Without such reserved memory zones, running the following stress command : $ stress-ng --vm 16 --vm-bytes 128M --timeout 10s multiple times: Could lead to the following kernel crashes : [ 46.937975] Bad mode in Error handler detected on CPU1, code 0xbf000000 -- SError ... [ 47.058536] Internal error: Attempting to execute userspace memory: 8600000f [#3] PREEMPT SMP ... Instead of the OOM killer. Fixes: 4f24eda8401f ("ARM64: dts: Prepare configs for Amlogic Meson GXBaby") Signed-off-by: Neil Armstrong Reviewed-by: Andreas Färber [khilman: added Fixes tag, added _reserved and unit addresses] Signed-off-by: Kevin Hilman Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index eada0b58ba1c..0cbe24b49710 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -55,6 +55,24 @@ #address-cells = <2>; #size-cells = <2>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 16 MiB reserved for Hardware ROM Firmware */ + hwrom_reserved: hwrom@0 { + reg = <0x0 0x0 0x0 0x1000000>; + no-map; + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@10000000 { + reg = <0x0 0x10000000 0x0 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; -- cgit v1.2.3 From 97a98ae5b8acf08d07d972c087b2def060bc9b73 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Tue, 17 Jan 2017 21:10:11 +0100 Subject: ARM: 8642/1: LPAE: catch pending imprecise abort on unmask Asynchronous external abort is coded differently in DFSR with LPAE enabled. Fixes: 9254970c "ARM: 8447/1: catch pending imprecise abort on unmask". Signed-off-by: Alexander Sverdlin Cc: Russell King Cc: Andrew Morton Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Russell King --- arch/arm/mm/fault.c | 4 ++-- arch/arm/mm/fault.h | 4 ++++ 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 3a2e678b8d30..0122ad1a6027 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -610,9 +610,9 @@ static int __init early_abort_handler(unsigned long addr, unsigned int fsr, void __init early_abt_enable(void) { - fsr_info[22].fn = early_abort_handler; + fsr_info[FSR_FS_AEA].fn = early_abort_handler; local_abt_enable(); - fsr_info[22].fn = do_bad; + fsr_info[FSR_FS_AEA].fn = do_bad; } #ifndef CONFIG_ARM_LPAE diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h index 67532f242271..afc1f84e763b 100644 --- a/arch/arm/mm/fault.h +++ b/arch/arm/mm/fault.h @@ -11,11 +11,15 @@ #define FSR_FS5_0 (0x3f) #ifdef CONFIG_ARM_LPAE +#define FSR_FS_AEA 17 + static inline int fsr_fs(unsigned int fsr) { return fsr & FSR_FS5_0; } #else +#define FSR_FS_AEA 22 + static inline int fsr_fs(unsigned int fsr) { return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6; -- cgit v1.2.3 From 228dbbfb5d77f8e047b2a1d78da14b7158433027 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 18 Jan 2017 17:11:56 +0100 Subject: ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: # 3.0.x- Fixes: 5be6f62b0059 ("ARM: 6883/1: ptrace: Migrate to regsets framework") Signed-off-by: Dave Martin Acked-by: Russell King Signed-off-by: Russell King --- arch/arm/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index ce131ed5939d..ae738a6319f6 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -600,7 +600,7 @@ static int gpr_set(struct task_struct *target, const void *kbuf, const void __user *ubuf) { int ret; - struct pt_regs newregs; + struct pt_regs newregs = *task_pt_regs(target); ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newregs, -- cgit v1.2.3 From 81917bad86a66f2bdcb12b4c10ab1bf333ed25ec Mon Sep 17 00:00:00 2001 From: Roger Shimizu Date: Mon, 30 Jan 2017 20:07:29 +0900 Subject: ARM: dts: orion5x-lschl: Fix model name Model name should be consistent with legacy device file, so that user can migrate their system from legacy device support to device-tree safely. Legacy device file is currently removed, but it can be found on 4.8 or previous version of linux: arch/arm/mach-orion5x/ls-chl-setup.c Fixes: f94f268979a2 ("ARM: dts: orion5x: convert ls-chl to FDT") Cc: Ashley Hughes Signed-off-by: Roger Shimizu Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/orion5x-lschl.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/orion5x-lschl.dts b/arch/arm/boot/dts/orion5x-lschl.dts index 947409252845..ea6c881634b9 100644 --- a/arch/arm/boot/dts/orion5x-lschl.dts +++ b/arch/arm/boot/dts/orion5x-lschl.dts @@ -2,7 +2,7 @@ * Device Tree file for Buffalo Linkstation LS-CHLv3 * * Copyright (C) 2016 Ash Hughes - * Copyright (C) 2015, 2016 + * Copyright (C) 2015-2017 * Roger Shimizu * * This file is dual-licensed: you can use it either under the terms @@ -52,7 +52,7 @@ #include / { - model = "Buffalo Linkstation Live v3 (LS-CHL)"; + model = "Buffalo Linkstation LiveV3 (LS-CHL)"; compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { /* 128 MB */ -- cgit v1.2.3 From 6cfd3cd8d8365cf78db1d25cd276d3d900eb8541 Mon Sep 17 00:00:00 2001 From: Roger Shimizu Date: Mon, 30 Jan 2017 20:07:30 +0900 Subject: ARM: dts: orion5x-lschl: More consistent naming on linkstation series DTS files, which includes orion5x-linkstation.dtsi, are named: orion5x-linkstation-*.dts So we rename the file below: arch/arm/boot/dts/orion5x-lschl.dts to the new name: arch/arm/boot/dts/orion5x-linkstation-lschl.dts Because DTS conversion of this device was just introduced in 4.9, Debian is still using legacy device support, other distros are the same, so here we won't expect any impact actually. Fixes: f94f268979a2 ("ARM: dts: orion5x: convert ls-chl to FDT") Cc: Ashley Hughes Signed-off-by: Roger Shimizu Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/orion5x-linkstation-lschl.dts | 171 ++++++++++++++++++++++++ arch/arm/boot/dts/orion5x-lschl.dts | 171 ------------------------ 2 files changed, 171 insertions(+), 171 deletions(-) create mode 100644 arch/arm/boot/dts/orion5x-linkstation-lschl.dts delete mode 100644 arch/arm/boot/dts/orion5x-lschl.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts new file mode 100644 index 000000000000..ea6c881634b9 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts @@ -0,0 +1,171 @@ +/* + * Device Tree file for Buffalo Linkstation LS-CHLv3 + * + * Copyright (C) 2016 Ash Hughes + * Copyright (C) 2015-2017 + * Roger Shimizu + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "orion5x-linkstation.dtsi" +#include "mvebu-linkstation-gpio-simple.dtsi" +#include "mvebu-linkstation-fan.dtsi" +#include + +/ { + model = "Buffalo Linkstation LiveV3 (LS-CHL)"; + compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + gpio_keys { + func { + label = "Function Button"; + linux,code = ; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + power-on-switch { + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + power-auto-switch { + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>; + blue-power-led { + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + red-alarm-led { + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + amber-info-led { + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + func { + label = "lschl:func:blue:top"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_fan { + gpios = <&gpio0 14 GPIO_ACTIVE_LOW + &gpio0 16 GPIO_ACTIVE_LOW>; + + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl { + pmx_led_power: pmx-leds { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_led_alarm: pmx-leds { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_led_info: pmx-leds { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp8", "mpp10", "mpp15"; + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_led_func: pmx-leds { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_sw_init: pmx-sw-init { + marvell,pins = "mpp7"; + marvell,function = "gpio"; + }; +}; + +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; +}; + +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; +}; + diff --git a/arch/arm/boot/dts/orion5x-lschl.dts b/arch/arm/boot/dts/orion5x-lschl.dts deleted file mode 100644 index ea6c881634b9..000000000000 --- a/arch/arm/boot/dts/orion5x-lschl.dts +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Device Tree file for Buffalo Linkstation LS-CHLv3 - * - * Copyright (C) 2016 Ash Hughes - * Copyright (C) 2015-2017 - * Roger Shimizu - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "orion5x-linkstation.dtsi" -#include "mvebu-linkstation-gpio-simple.dtsi" -#include "mvebu-linkstation-fan.dtsi" -#include - -/ { - model = "Buffalo Linkstation LiveV3 (LS-CHL)"; - compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x"; - - memory { /* 128 MB */ - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - gpio_keys { - func { - label = "Function Button"; - linux,code = ; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - power-on-switch { - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - }; - - power-auto-switch { - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>; - blue-power-led { - gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; - }; - - red-alarm-led { - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - }; - - amber-info-led { - gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - }; - - func { - label = "lschl:func:blue:top"; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_fan { - gpios = <&gpio0 14 GPIO_ACTIVE_LOW - &gpio0 16 GPIO_ACTIVE_LOW>; - - alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; - }; -}; - -&pinctrl { - pmx_led_power: pmx-leds { - marvell,pins = "mpp0"; - marvell,function = "gpio"; - }; - - pmx_power_hdd: pmx-power-hdd { - marvell,pins = "mpp1"; - marvell,function = "gpio"; - }; - - pmx_led_alarm: pmx-leds { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_led_info: pmx-leds { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp8", "mpp10", "mpp15"; - marvell,function = "gpio"; - }; - - pmx_power_usb: pmx-power-usb { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_led_func: pmx-leds { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_sw_init: pmx-sw-init { - marvell,pins = "mpp7"; - marvell,function = "gpio"; - }; -}; - -&hdd_power { - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; -}; - -&usb_power { - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; -}; - -- cgit v1.2.3 From 1a902f6b70c55171ca2419d946b85274e35c9757 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 Feb 2017 12:38:33 +0100 Subject: ARM: orion5x: fix Makefile for linkstation-lschl.dtb The rename of orion5x-lschl.dts needs to be reflected in the Makefile: make[3]: *** No rule to make target 'arch/arm/boot/dts/orion5x-lschl.dtb', needed by '__build'. Fixes: 6cfd3cd8d836 ("ARM: dts: orion5x-lschl: More consistent naming on linkstation series") Signed-off-by: Arnd Bergmann Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cccdbcb557b6..20fe4a54ee5e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -616,7 +616,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-linkstation-lsgl.dtb \ orion5x-linkstation-lswtgl.dtb \ - orion5x-lschl.dtb \ + orion5x-linkstation-lschl.dtb \ orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-netgear-wnr854t.dtb \ -- cgit v1.2.3 From 5aff1d245e8cc1ab5c4517d916edaed9e3f7f973 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 3 Feb 2017 09:58:24 +0100 Subject: ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in The symbols can no longer be used as loadable modules, leading to a harmless Kconfig warning: arch/arm/configs/imote2_defconfig:60:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/arm/configs/imote2_defconfig:59:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP arch/arm/configs/ezx_defconfig:68:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/arm/configs/ezx_defconfig:67:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP Let's make them built-in. Signed-off-by: Arnd Bergmann --- arch/arm/configs/ezx_defconfig | 4 ++-- arch/arm/configs/imote2_defconfig | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index ea316c4b890e..d3f1768840e2 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -64,8 +64,8 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 18e59feaa307..7f479cdb3479 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -56,8 +56,8 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m -- cgit v1.2.3 From d7df2443cd5f67fc6ee7c05a88e4996e8177f91b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 3 Feb 2017 17:10:28 +1100 Subject: powerpc/mm: Fix spurrious segfaults on radix with autonuma When autonuma (Automatic NUMA balancing) marks a PTE inaccessible it clears all the protection bits but leave the PTE valid. With the Radix MMU, an attempt at executing from such a PTE will take a fault with bit 35 of SRR1 set "SRR1_ISI_N_OR_G". It is thus incorrect to treat all such faults as errors. We should pass them to handle_mm_fault() for autonuma to deal with. The case of pages that are really not executable is handled by the existing test for VM_EXEC further down. That leaves us with catching the kernel attempts at executing user pages. We can catch that earlier, even before we do find_vma. It is never valid on powerpc for the kernel to take an exec fault to begin with. So fold that test with the existing test for the kernel faulting on kernel addresses to bail out early. Fixes: 1d18ad026844 ("powerpc/mm: Detect instruction fetch denied and report") Signed-off-by: Benjamin Herrenschmidt Reviewed-by: Aneesh Kumar K.V Acked-by: Balbir Singh Signed-off-by: Michael Ellerman --- arch/powerpc/mm/fault.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 6fd30ac7d14a..62a50d6d1053 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -253,8 +253,11 @@ int do_page_fault(struct pt_regs *regs, unsigned long address, if (unlikely(debugger_fault_handler(regs))) goto bail; - /* On a kernel SLB miss we can only check for a valid exception entry */ - if (!user_mode(regs) && (address >= TASK_SIZE)) { + /* + * The kernel should never take an execute fault nor should it + * take a page fault to a kernel address. + */ + if (!user_mode(regs) && (is_exec || (address >= TASK_SIZE))) { rc = SIGSEGV; goto bail; } @@ -390,20 +393,6 @@ good_area: #endif /* CONFIG_8xx */ if (is_exec) { - /* - * An execution fault + no execute ? - * - * On CPUs that don't have CPU_FTR_COHERENT_ICACHE we - * deliberately create NX mappings, and use the fault to do the - * cache flush. This is usually handled in hash_page_do_lazy_icache() - * but we could end up here if that races with a concurrent PTE - * update. In that case we need to fall through here to the VMA - * check below. - */ - if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE) && - (regs->msr & SRR1_ISI_N_OR_G)) - goto bad_area; - /* * Allow execution from readable areas if the MMU does not * provide separate controls over reading and executing. -- cgit v1.2.3 From d966564fcdc19e13eb6ba1fbe6b8101070339c3d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 8 Feb 2017 18:08:29 -0800 Subject: Revert "x86/ioapic: Restore IO-APIC irq_chip retrigger callback" This reverts commit 020eb3daaba2857b32c4cf4c82f503d6a00a67de. Gabriel C reports that it causes his machine to not boot, and we haven't tracked down the reason for it yet. Since the bug it fixes has been around for a longish time, we're better off reverting the fix for now. Gabriel says: "It hangs early and freezes with a lot RCU warnings. I bisected it down to : > Ruslan Ruslichenko (1): > x86/ioapic: Restore IO-APIC irq_chip retrigger callback Reverting this one fixes the problem for me.. The box is a PRIMERGY TX200 S5 , 2 socket , 2 x E5520 CPU(s) installed" and Ruslan and Thomas are currently stumped. Reported-and-bisected-by: Gabriel C Cc: Ruslan Ruslichenko Cc: Thomas Gleixner Cc: stable@kernel.org # for the backport of the original commit Signed-off-by: Linus Torvalds --- arch/x86/kernel/apic/io_apic.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 52f352b063fd..bd6b8c270c24 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1875,7 +1875,6 @@ static struct irq_chip ioapic_chip __read_mostly = { .irq_ack = irq_chip_ack_parent, .irq_eoi = ioapic_ack_level, .irq_set_affinity = ioapic_set_affinity, - .irq_retrigger = irq_chip_retrigger_hierarchy, .flags = IRQCHIP_SKIP_SET_WAKE, }; @@ -1887,7 +1886,6 @@ static struct irq_chip ioapic_ir_chip __read_mostly = { .irq_ack = irq_chip_ack_parent, .irq_eoi = ioapic_ir_ack_level, .irq_set_affinity = ioapic_set_affinity, - .irq_retrigger = irq_chip_retrigger_hierarchy, .flags = IRQCHIP_SKIP_SET_WAKE, }; -- cgit v1.2.3 From 90c1e3c2fafec57fcb55b5d69bcf293b1a5fc8b3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 6 Feb 2017 13:05:16 +1100 Subject: powerpc/mm/radix: Update ERAT flushes when invalidating TLB Three tiny changes to the ERAT flushing logic: First don't make it depend on DD1. It hasn't been decided yet but we might run DD2 in a mode that also requires explicit flushes for performance reasons so make it unconditional. We also add a missing isync, and finally remove the flush from _tlbiel_va as it is only necessary for congruence-class invalidations (PID, LPID and full TLB), not targetted invalidations. Fixes: 96ed1fe511a8 ("powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman --- arch/powerpc/mm/tlb-radix.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c index 61b79119065f..952713d6cf04 100644 --- a/arch/powerpc/mm/tlb-radix.c +++ b/arch/powerpc/mm/tlb-radix.c @@ -50,9 +50,7 @@ static inline void _tlbiel_pid(unsigned long pid, unsigned long ric) for (set = 0; set < POWER9_TLB_SETS_RADIX ; set++) { __tlbiel_pid(pid, set, ric); } - if (cpu_has_feature(CPU_FTR_POWER9_DD1)) - asm volatile(PPC_INVALIDATE_ERAT : : :"memory"); - return; + asm volatile(PPC_INVALIDATE_ERAT "; isync" : : :"memory"); } static inline void _tlbie_pid(unsigned long pid, unsigned long ric) @@ -85,8 +83,6 @@ static inline void _tlbiel_va(unsigned long va, unsigned long pid, asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1) : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory"); asm volatile("ptesync": : :"memory"); - if (cpu_has_feature(CPU_FTR_POWER9_DD1)) - asm volatile(PPC_INVALIDATE_ERAT : : :"memory"); } static inline void _tlbie_va(unsigned long va, unsigned long pid, -- cgit v1.2.3 From 9b256714979fad61ae11d90b53cf67dd5e6484eb Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 7 Feb 2017 11:35:31 +1100 Subject: powerpc/powernv: Fix CPU hotplug to handle waking on HVI The IPIs come in as HVI not EE, so we need to test the appropriate SRR1 bits. The encoding is such that it won't have false positives on P7 and P8 so we can just test it like that. We also need to handle the icp-opal variant of the flush. Fixes: d74361881f0d ("powerpc/xics: Add ICP OPAL backend") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/reg.h | 3 ++- arch/powerpc/include/asm/xics.h | 1 + arch/powerpc/platforms/powernv/smp.c | 12 ++++++++++-- arch/powerpc/sysdev/xics/icp-opal.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 42 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 0d4531aa2052..dff79798903d 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -649,9 +649,10 @@ #define SRR1_ISI_N_OR_G 0x10000000 /* ISI: Access is no-exec or G */ #define SRR1_ISI_PROT 0x08000000 /* ISI: Other protection fault */ #define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */ -#define SRR1_WAKEMASK_P8 0x003c0000 /* reason for wakeup on POWER8 */ +#define SRR1_WAKEMASK_P8 0x003c0000 /* reason for wakeup on POWER8 and 9 */ #define SRR1_WAKESYSERR 0x00300000 /* System error */ #define SRR1_WAKEEE 0x00200000 /* External interrupt */ +#define SRR1_WAKEHVI 0x00240000 /* Hypervisor Virtualization Interrupt (P9) */ #define SRR1_WAKEMT 0x00280000 /* mtctrl */ #define SRR1_WAKEHMI 0x00280000 /* Hypervisor maintenance */ #define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */ diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h index f0b238516e9b..e0b9e576905a 100644 --- a/arch/powerpc/include/asm/xics.h +++ b/arch/powerpc/include/asm/xics.h @@ -44,6 +44,7 @@ static inline int icp_hv_init(void) { return -ENODEV; } #ifdef CONFIG_PPC_POWERNV extern int icp_opal_init(void); +extern void icp_opal_flush_interrupt(void); #else static inline int icp_opal_init(void) { return -ENODEV; } #endif diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index c789258ae1e1..eec0e8d0454d 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -155,8 +155,10 @@ static void pnv_smp_cpu_kill_self(void) wmask = SRR1_WAKEMASK_P8; idle_states = pnv_get_supported_cpuidle_states(); + /* We don't want to take decrementer interrupts while we are offline, - * so clear LPCR:PECE1. We keep PECE2 enabled. + * so clear LPCR:PECE1. We keep PECE2 (and LPCR_PECE_HVEE on P9) + * enabled as to let IPIs in. */ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); @@ -206,8 +208,12 @@ static void pnv_smp_cpu_kill_self(void) * contains 0. */ if (((srr1 & wmask) == SRR1_WAKEEE) || + ((srr1 & wmask) == SRR1_WAKEHVI) || (local_paca->irq_happened & PACA_IRQ_EE)) { - icp_native_flush_interrupt(); + if (cpu_has_feature(CPU_FTR_ARCH_300)) + icp_opal_flush_interrupt(); + else + icp_native_flush_interrupt(); } else if ((srr1 & wmask) == SRR1_WAKEHDBELL) { unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER); asm volatile(PPC_MSGCLR(%0) : : "r" (msg)); @@ -221,6 +227,8 @@ static void pnv_smp_cpu_kill_self(void) if (srr1 && !generic_check_cpu_restart(cpu)) DBG("CPU%d Unexpected exit while offline !\n", cpu); } + + /* Re-enable decrementer interrupts */ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1); DBG("CPU%d coming online...\n", cpu); } diff --git a/arch/powerpc/sysdev/xics/icp-opal.c b/arch/powerpc/sysdev/xics/icp-opal.c index 60c57657c772..c96c0cb95d87 100644 --- a/arch/powerpc/sysdev/xics/icp-opal.c +++ b/arch/powerpc/sysdev/xics/icp-opal.c @@ -132,6 +132,35 @@ static irqreturn_t icp_opal_ipi_action(int irq, void *dev_id) return smp_ipi_demux(); } +/* + * Called when an interrupt is received on an off-line CPU to + * clear the interrupt, so that the CPU can go back to nap mode. + */ +void icp_opal_flush_interrupt(void) +{ + unsigned int xirr; + unsigned int vec; + + do { + xirr = icp_opal_get_xirr(); + vec = xirr & 0x00ffffff; + if (vec == XICS_IRQ_SPURIOUS) + break; + if (vec == XICS_IPI) { + /* Clear pending IPI */ + int cpu = smp_processor_id(); + kvmppc_set_host_ipi(cpu, 0); + opal_int_set_mfrr(get_hard_smp_processor_id(cpu), 0xff); + } else { + pr_err("XICS: hw interrupt 0x%x to offline cpu, " + "disabling\n", vec); + xics_mask_unknown_vec(vec); + } + + /* EOI the interrupt */ + } while (opal_int_eoi(xirr) > 0); +} + #endif /* CONFIG_SMP */ static const struct icp_ops icp_opal_ops = { -- cgit v1.2.3 From f83e6862047e1e371bdc5d512dd6cabe8a3965b8 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 7 Feb 2017 11:35:36 +1100 Subject: powerpc/powernv: Properly set "host-ipi" on IPIs Otherwise KVM will fail to pass them through to the host Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman --- arch/powerpc/sysdev/xics/icp-opal.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/xics/icp-opal.c b/arch/powerpc/sysdev/xics/icp-opal.c index c96c0cb95d87..f9670eabfcfa 100644 --- a/arch/powerpc/sysdev/xics/icp-opal.c +++ b/arch/powerpc/sysdev/xics/icp-opal.c @@ -120,14 +120,16 @@ static void icp_opal_cause_ipi(int cpu, unsigned long data) { int hw_cpu = get_hard_smp_processor_id(cpu); + kvmppc_set_host_ipi(cpu, 1); opal_int_set_mfrr(hw_cpu, IPI_PRIORITY); } static irqreturn_t icp_opal_ipi_action(int irq, void *dev_id) { - int hw_cpu = hard_smp_processor_id(); + int cpu = smp_processor_id(); - opal_int_set_mfrr(hw_cpu, 0xff); + kvmppc_set_host_ipi(cpu, 0); + opal_int_set_mfrr(get_hard_smp_processor_id(cpu), 0xff); return smp_ipi_demux(); } -- cgit v1.2.3