From 71e2f4dd5a65bd8dbca0b77661e75eea471168f8 Mon Sep 17 00:00:00 2001 From: Jiaxun Yang Date: Sun, 20 Oct 2019 22:43:14 +0800 Subject: MIPS: Fork loongson2ef from loongson64 As later model of GSx64 family processors including 2-series-soc have similar design with initial loongson3a while loongson2e/f seems less identical, we separate loongson2e/f support code out of mach-loongson64 to make our life easier. This patch contains mostly file moving works. Signed-off-by: Jiaxun Yang [paulburton@kernel.org: Squash in the MAINTAINERS updates] Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: paul.burton@mips.com --- arch/mips/loongson64/Kconfig | 75 ----- arch/mips/loongson64/Makefile | 12 - arch/mips/loongson64/Platform | 21 -- arch/mips/loongson64/common/Makefile | 6 - arch/mips/loongson64/common/cs5536/Makefile | 12 - arch/mips/loongson64/common/cs5536/cs5536_acc.c | 136 --------- arch/mips/loongson64/common/cs5536/cs5536_ehci.c | 156 ----------- arch/mips/loongson64/common/cs5536/cs5536_ide.c | 188 ------------- arch/mips/loongson64/common/cs5536/cs5536_isa.c | 326 ---------------------- arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c | 207 -------------- arch/mips/loongson64/common/cs5536/cs5536_ohci.c | 145 ---------- arch/mips/loongson64/common/cs5536/cs5536_pci.c | 84 ------ arch/mips/loongson64/fuloong-2e/Makefile | 6 - arch/mips/loongson64/fuloong-2e/dma.c | 12 - arch/mips/loongson64/fuloong-2e/irq.c | 65 ----- arch/mips/loongson64/fuloong-2e/reset.c | 19 -- arch/mips/loongson64/lemote-2f/Makefile | 12 - arch/mips/loongson64/lemote-2f/clock.c | 143 ---------- arch/mips/loongson64/lemote-2f/dma.c | 14 - arch/mips/loongson64/lemote-2f/ec_kb3310b.c | 125 --------- arch/mips/loongson64/lemote-2f/ec_kb3310b.h | 184 ------------ arch/mips/loongson64/lemote-2f/irq.c | 126 --------- arch/mips/loongson64/lemote-2f/machtype.c | 41 --- arch/mips/loongson64/lemote-2f/pm.c | 145 ---------- arch/mips/loongson64/lemote-2f/reset.c | 155 ---------- 25 files changed, 2415 deletions(-) delete mode 100644 arch/mips/loongson64/common/cs5536/Makefile delete mode 100644 arch/mips/loongson64/common/cs5536/cs5536_acc.c delete mode 100644 arch/mips/loongson64/common/cs5536/cs5536_ehci.c delete mode 100644 arch/mips/loongson64/common/cs5536/cs5536_ide.c delete mode 100644 arch/mips/loongson64/common/cs5536/cs5536_isa.c delete mode 100644 arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c delete mode 100644 arch/mips/loongson64/common/cs5536/cs5536_ohci.c delete mode 100644 arch/mips/loongson64/common/cs5536/cs5536_pci.c delete mode 100644 arch/mips/loongson64/fuloong-2e/Makefile delete mode 100644 arch/mips/loongson64/fuloong-2e/dma.c delete mode 100644 arch/mips/loongson64/fuloong-2e/irq.c delete mode 100644 arch/mips/loongson64/fuloong-2e/reset.c delete mode 100644 arch/mips/loongson64/lemote-2f/Makefile delete mode 100644 arch/mips/loongson64/lemote-2f/clock.c delete mode 100644 arch/mips/loongson64/lemote-2f/dma.c delete mode 100644 arch/mips/loongson64/lemote-2f/ec_kb3310b.c delete mode 100644 arch/mips/loongson64/lemote-2f/ec_kb3310b.h delete mode 100644 arch/mips/loongson64/lemote-2f/irq.c delete mode 100644 arch/mips/loongson64/lemote-2f/machtype.c delete mode 100644 arch/mips/loongson64/lemote-2f/pm.c delete mode 100644 arch/mips/loongson64/lemote-2f/reset.c (limited to 'arch/mips/loongson64') diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index d08b20ff2b27..0e99a5af6e90 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -4,65 +4,6 @@ if MACH_LOONGSON64 choice prompt "Machine Type" -config LEMOTE_FULOONG2E - bool "Lemote Fuloong(2e) mini-PC" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2E - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HAVE_PCI - select I8259 - select ISA - select IRQ_MIPS_CPU - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB - select LOONGSON_MC146818 - help - Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge - - Lemote Fuloong(2e) mini PC have a VIA686B south bridge. - -config LEMOTE_MACH2F - bool "Lemote Loongson 2F family machines" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select BOARD_SCACHE - select BOOT_ELF32 - select CEVT_R4K if ! MIPS_EXTERNAL_TIMER - select CPU_HAS_WB - select CS5536 - select CSRC_R4K if ! MIPS_EXTERNAL_TIMER - select DMA_NONCOHERENT - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select HAVE_CLK - select HAVE_PCI - select I8259 - select IRQ_MIPS_CPU - select ISA - select SYS_HAS_CPU_LOONGSON2F - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - help - Lemote Loongson 2F family machines utilize the 2F revision of - Loongson processor and the AMD CS5536 south bridge. - - These family machines include fuloong2f mini PC, yeeloong2f notebook, - LingLoong allinone PC and so forth. - config LOONGSON_MACH3X bool "Generic Loongson 3 family machines" select ARCH_SPARSEMEM_ENABLE @@ -95,22 +36,6 @@ config LOONGSON_MACH3X of Loongson processor and RS780/SBX00 chipset. endchoice -config CS5536 - bool - -config CS5536_MFGPT - bool "CS5536 MFGPT Timer" - depends on CS5536 && !HIGH_RES_TIMERS - select MIPS_EXTERNAL_TIMER - help - This option enables the mfgpt0 timer of AMD CS5536. With this timer - switched on you can not use high resolution timers. - - If you want to enable the Loongson2 CPUFreq Driver, Please enable - this option at first, otherwise, You will get wrong system time. - - If unsure, say Yes. - config RS780_HPET bool "RS780/SBX00 HPET Timer" depends on LOONGSON_MACH3X diff --git a/arch/mips/loongson64/Makefile b/arch/mips/loongson64/Makefile index c74bc0251e9d..dc16a23c171f 100644 --- a/arch/mips/loongson64/Makefile +++ b/arch/mips/loongson64/Makefile @@ -5,18 +5,6 @@ obj-$(CONFIG_MACH_LOONGSON64) += common/ -# -# Lemote Fuloong mini-PC (Loongson 2E-based) -# - -obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ - -# -# Lemote loongson2f family machines -# - -obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ - # # All Loongson-3 family machines # diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform index 4da74eea7de8..31167e568e46 100644 --- a/arch/mips/loongson64/Platform +++ b/arch/mips/loongson64/Platform @@ -2,25 +2,6 @@ # Loongson Processors' Support # -# Only gcc >= 4.4 have Loongson specific support -cflags-$(CONFIG_CPU_LOONGSON2EF) += -Wa,--trap -cflags-$(CONFIG_CPU_LOONGSON2E) += \ - $(call cc-option,-march=loongson2e,-march=r4600) -cflags-$(CONFIG_CPU_LOONGSON2F) += \ - $(call cc-option,-march=loongson2f,-march=r4600) -# Enable the workarounds for Loongson2f -ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS - ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) - $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) - else - cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop - endif - ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) - $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) - else - cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump - endif -endif cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap @@ -72,6 +53,4 @@ endif platform-$(CONFIG_MACH_LOONGSON64) += loongson64/ cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely -load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 -load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile index 684624f61f5a..85438df80950 100644 --- a/arch/mips/loongson64/common/Makefile +++ b/arch/mips/loongson64/common/Makefile @@ -14,12 +14,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o obj-$(CONFIG_LOONGSON_MC146818) += rtc.o -# -# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure -# space -# -obj-$(CONFIG_CS5536) += cs5536/ - # # Suspend Support # diff --git a/arch/mips/loongson64/common/cs5536/Makefile b/arch/mips/loongson64/common/cs5536/Makefile deleted file mode 100644 index b32b29661245..000000000000 --- a/arch/mips/loongson64/common/cs5536/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for CS5536 support. -# - -obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \ - cs5536_isa.o cs5536_ehci.o - -# -# Enable cs5536 mfgpt Timer -# -obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o diff --git a/arch/mips/loongson64/common/cs5536/cs5536_acc.c b/arch/mips/loongson64/common/cs5536/cs5536_acc.c deleted file mode 100644 index ff50aae72916..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_acc.c +++ /dev/null @@ -1,136 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * the ACC Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include -#include - -void pci_acc_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - lo |= (0x03 << 8); - else - lo &= ~(0x03 << 8); - _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_BAR0_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_ACC_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if (value & 0x01) { - value &= 0xfffffffc; - hi = 0xA0000000 | ((value & 0x000ff000) >> 12); - lo = 0x000fff80 | ((value & 0x00000fff) << 20); - _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo); - } - break; - case PCI_ACC_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - /* disable all the usb interrupt in PIC */ - lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT); - if (value) /* enable all the acc interrupt in PIC */ - lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); - break; - default: - break; - } -} - -u32 pci_acc_read_reg(int reg) -{ - u32 hi, lo; - u32 conf_data = 0; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); - if (((lo & 0xfff00000) || (hi & 0x000000ff)) - && ((hi & 0xf0000000) == 0xa0000000)) - conf_data |= PCI_COMMAND_IO; - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if ((lo & 0x300) == 0x300) - conf_data |= PCI_COMMAND_MASTER; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_ACC_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - conf_data = - CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, - PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_ACC_FLAG) { - conf_data = CS5536_ACC_RANGE | - PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~SOFT_BAR_ACC_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); - conf_data = (hi & 0x000000ff) << 12; - conf_data |= (lo & 0xfff00000) >> 20; - conf_data |= 0x01; - conf_data &= ~0x02; - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR); - break; - default: - break; - } - - return conf_data; -} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c b/arch/mips/loongson64/common/cs5536/cs5536_ehci.c deleted file mode 100644 index bd4c39fe6109..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c +++ /dev/null @@ -1,156 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * the EHCI Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include -#include - -void pci_ehci_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - hi |= PCI_COMMAND_MASTER; - else - hi &= ~PCI_COMMAND_MASTER; - - if (value & PCI_COMMAND_MEMORY) - hi |= PCI_COMMAND_MEMORY; - else - hi &= ~PCI_COMMAND_MEMORY; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_BAR0_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_EHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if ((value & 0x01) == 0x00) { - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - lo = value; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - - value &= 0xfffffff0; - hi = 0x40000000 | ((value & 0xff000000) >> 24); - lo = 0x000fffff | ((value & 0x00fff000) << 8); - _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo); - } - break; - case PCI_EHCI_LEGSMIEN_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - hi &= 0x003f0000; - hi |= (value & 0x3f) << 16; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - break; - case PCI_EHCI_FLADJ_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - hi &= ~0x00003f00; - hi |= value & 0x00003f00; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - break; - default: - break; - } -} - -u32 pci_ehci_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - if (hi & PCI_COMMAND_MASTER) - conf_data |= PCI_COMMAND_MASTER; - if (hi & PCI_COMMAND_MEMORY) - conf_data |= PCI_COMMAND_MEMORY; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_EHCI_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - conf_data = - CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, - PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_EHCI_FLAG) { - conf_data = CS5536_EHCI_RANGE | - PCI_BASE_ADDRESS_SPACE_MEMORY; - lo &= ~SOFT_BAR_EHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = lo & 0xfffff000; - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); - break; - case PCI_EHCI_LEGSMIEN_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = (hi & 0x003f0000) >> 16; - break; - case PCI_EHCI_LEGSMISTS_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = (hi & 0x3f000000) >> 24; - break; - case PCI_EHCI_FLADJ_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = hi & 0x00003f00; - break; - default: - break; - } - - return conf_data; -} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ide.c b/arch/mips/loongson64/common/cs5536/cs5536_ide.c deleted file mode 100644 index bb933294b092..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_ide.c +++ /dev/null @@ -1,188 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * the IDE Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include -#include - -void pci_ide_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - lo |= (0x03 << 4); - else - lo &= ~(0x03 << 4); - _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_CACHE_LINE_SIZE: - value &= 0x0000ff00; - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0xffffff00; - hi |= (value >> 8); - _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); - break; - case PCI_BAR4_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_IDE_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if (value & 0x01) { - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); - lo = (value & 0xfffffff0) | 0x1; - _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo); - - value &= 0xfffffffc; - hi = 0x60000000 | ((value & 0x000ff000) >> 12); - lo = 0x000ffff0 | ((value & 0x00000fff) << 20); - _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo); - } - break; - case PCI_IDE_CFG_REG: - if (value == CS5536_IDE_FLASH_SIGNATURE) { - _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo); - lo |= 0x01; - _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo); - } else { - _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo); - } - break; - case PCI_IDE_DTC_REG: - _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo); - break; - case PCI_IDE_CAST_REG: - _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo); - break; - case PCI_IDE_ETC_REG: - _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo); - break; - case PCI_IDE_PM_REG: - _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo); - break; - default: - break; - } -} - -u32 pci_ide_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); - if (lo & 0xfffffff0) - conf_data |= PCI_COMMAND_IO; - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if ((lo & 0x30) == 0x30) - conf_data |= PCI_COMMAND_MASTER; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_IDE_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0x000000f8; - conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi); - break; - case PCI_BAR4_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_IDE_FLAG) { - conf_data = CS5536_IDE_RANGE | - PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~SOFT_BAR_IDE_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); - conf_data = lo & 0xfffffff0; - conf_data |= 0x01; - conf_data &= ~0x02; - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR); - break; - case PCI_IDE_CFG_REG: - _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_DTC_REG: - _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_CAST_REG: - _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_ETC_REG: - _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_PM_REG: - _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); - conf_data = lo; - break; - default: - break; - } - - return conf_data; -} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_isa.c b/arch/mips/loongson64/common/cs5536/cs5536_isa.c deleted file mode 100644 index 5ad38f86ee62..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_isa.c +++ /dev/null @@ -1,326 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * the ISA Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include -#include -#include - -/* common variables for PCI_ISA_READ/WRITE_BAR */ -static const u32 divil_msr_reg[6] = { - DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO), - DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ), - DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI), -}; - -static const u32 soft_bar_flag[6] = { - SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG, - SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG, -}; - -static const u32 sb_msr_reg[6] = { - SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2), - SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5), -}; - -static const u32 bar_space_range[6] = { - CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE, - CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE, -}; - -static const int bar_space_len[6] = { - CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH, - CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH, -}; - -/* - * enable the divil module bar space. - * - * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg - * and the RCONFx(0~5) reg to use the modules. - */ -static void divil_lbar_enable(void) -{ - u32 hi, lo; - int offset; - - /* - * The DIVIL IRQ is not used yet. and make the RCONF0 reserved. - */ - - for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { - _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); - hi |= 0x01; - _wrmsr(DIVIL_MSR_REG(offset), hi, lo); - } -} - -/* - * disable the divil module bar space. - */ -static void divil_lbar_disable(void) -{ - u32 hi, lo; - int offset; - - for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { - _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); - hi &= ~0x01; - _wrmsr(DIVIL_MSR_REG(offset), hi, lo); - } -} - -/* - * BAR write: write value to the n BAR - */ - -void pci_isa_write_bar(int n, u32 value) -{ - u32 hi = 0, lo = value; - - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= soft_bar_flag[n]; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if (value & 0x01) { - /* NATIVE reg */ - hi = 0x0000f001; - lo &= bar_space_range[n]; - _wrmsr(divil_msr_reg[n], hi, lo); - - /* RCONFx is 4bytes in units for I/O space */ - hi = ((value & 0x000ffffc) << 12) | - ((bar_space_len[n] - 4) << 12) | 0x01; - lo = ((value & 0x000ffffc) << 12) | 0x01; - _wrmsr(sb_msr_reg[n], hi, lo); - } -} - -/* - * BAR read: read the n BAR - */ - -u32 pci_isa_read_bar(int n) -{ - u32 conf_data = 0; - u32 hi, lo; - - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & soft_bar_flag[n]) { - conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~soft_bar_flag[n]; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(divil_msr_reg[n], &hi, &lo); - conf_data = lo & bar_space_range[n]; - conf_data |= 0x01; - conf_data &= ~0x02; - } - return conf_data; -} - -/* - * isa_write: ISA write transfer - * - * We assume that this is not a bus master transfer. - */ -void pci_isa_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - u32 temp; - - switch (reg) { - case PCI_COMMAND: - if (value & PCI_COMMAND_IO) - divil_lbar_enable(); - else - divil_lbar_disable(); - break; - case PCI_STATUS: - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - temp = lo & 0x0000ffff; - if ((value & PCI_STATUS_SIG_TARGET_ABORT) && - (lo & SB_TAS_ERR_EN)) - temp |= SB_TAS_ERR_FLAG; - - if ((value & PCI_STATUS_REC_TARGET_ABORT) && - (lo & SB_TAR_ERR_EN)) - temp |= SB_TAR_ERR_FLAG; - - if ((value & PCI_STATUS_REC_MASTER_ABORT) - && (lo & SB_MAR_ERR_EN)) - temp |= SB_MAR_ERR_FLAG; - - if ((value & PCI_STATUS_DETECTED_PARITY) - && (lo & SB_PARE_ERR_EN)) - temp |= SB_PARE_ERR_FLAG; - - lo = temp; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - break; - case PCI_CACHE_LINE_SIZE: - value &= 0x0000ff00; - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0xffffff00; - hi |= (value >> 8); - _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); - break; - case PCI_BAR0_REG: - pci_isa_write_bar(0, value); - break; - case PCI_BAR1_REG: - pci_isa_write_bar(1, value); - break; - case PCI_BAR2_REG: - pci_isa_write_bar(2, value); - break; - case PCI_BAR3_REG: - pci_isa_write_bar(3, value); - break; - case PCI_BAR4_REG: - pci_isa_write_bar(4, value); - break; - case PCI_BAR5_REG: - pci_isa_write_bar(5, value); - break; - case PCI_UART1_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); - /* disable uart1 interrupt in PIC */ - lo &= ~(0xf << 24); - if (value) /* enable uart1 interrupt in PIC */ - lo |= (CS5536_UART1_INTR << 24); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); - break; - case PCI_UART2_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); - /* disable uart2 interrupt in PIC */ - lo &= ~(0xf << 28); - if (value) /* enable uart2 interrupt in PIC */ - lo |= (CS5536_UART2_INTR << 28); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); - break; - case PCI_ISA_FIXUP_REG: - if (value) { - /* enable the TARGET ABORT/MASTER ABORT etc. */ - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - lo |= 0x00000063; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - - default: - /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */ - break; - } -} - -/* - * isa_read: ISA read transfers - * - * We assume that this is not a bus master transfer. - */ -u32 pci_isa_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - /* we just check the first LBAR for the IO enable bit, */ - /* maybe we should changed later. */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo); - if (hi & 0x01) - conf_data |= PCI_COMMAND_IO; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - conf_data |= PCI_STATUS_FAST_BACK; - - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_TAS_ERR_FLAG) - conf_data |= PCI_STATUS_SIG_TARGET_ABORT; - if (lo & SB_TAR_ERR_FLAG) - conf_data |= PCI_STATUS_REC_TARGET_ABORT; - if (lo & SB_MAR_ERR_FLAG) - conf_data |= PCI_STATUS_REC_MASTER_ABORT; - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_DETECTED_PARITY; - break; - case PCI_CLASS_REVISION: - _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_ISA_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0x000000f8; - conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi); - break; - /* - * we only use the LBAR of DIVIL, no RCONF used. - * all of them are IO space. - */ - case PCI_BAR0_REG: - return pci_isa_read_bar(0); - break; - case PCI_BAR1_REG: - return pci_isa_read_bar(1); - break; - case PCI_BAR2_REG: - return pci_isa_read_bar(2); - break; - case PCI_BAR3_REG: - break; - case PCI_BAR4_REG: - return pci_isa_read_bar(4); - break; - case PCI_BAR5_REG: - return pci_isa_read_bar(5); - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_POINTER; - break; - case PCI_INTERRUPT_LINE: - /* no interrupt used here */ - conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00); - break; - default: - break; - } - - return conf_data; -} - -/* - * The mfgpt timer interrupt is running early, so we must keep the south bridge - * mmio always enabled. Otherwise we may race with the PCI configuration which - * may temporarily disable it. When that happens and the timer interrupt fires, - * we are not able to clear it and the system will hang. - */ -static void cs5536_isa_mmio_always_on(struct pci_dev *dev) -{ - dev->mmio_always_on = 1; -} -DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, - PCI_CLASS_BRIDGE_ISA, 8, cs5536_isa_mmio_always_on); diff --git a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c deleted file mode 100644 index 30af1b7c7529..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c +++ /dev/null @@ -1,207 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * CS5536 General timer functions - * - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Yanhua, yanh@lemote.com - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu zhangjin, wuzhangjin@gmail.com - * - * Reference: AMD Geode(TM) CS5536 Companion Device Data Book - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -static DEFINE_RAW_SPINLOCK(mfgpt_lock); - -static u32 mfgpt_base; - -/* - * Initialize the MFGPT timer. - * - * This is also called after resume to bring the MFGPT into operation again. - */ - -/* disable counter */ -void disable_mfgpt0_counter(void) -{ - outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP); -} -EXPORT_SYMBOL(disable_mfgpt0_counter); - -/* enable counter, comparator2 to event mode, 14.318MHz clock */ -void enable_mfgpt0_counter(void) -{ - outw(0xe310, MFGPT0_SETUP); -} -EXPORT_SYMBOL(enable_mfgpt0_counter); - -static int mfgpt_timer_set_periodic(struct clock_event_device *evt) -{ - raw_spin_lock(&mfgpt_lock); - - outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */ - outw(0, MFGPT0_CNT); /* set counter to 0 */ - enable_mfgpt0_counter(); - - raw_spin_unlock(&mfgpt_lock); - return 0; -} - -static int mfgpt_timer_shutdown(struct clock_event_device *evt) -{ - if (clockevent_state_periodic(evt) || clockevent_state_oneshot(evt)) { - raw_spin_lock(&mfgpt_lock); - disable_mfgpt0_counter(); - raw_spin_unlock(&mfgpt_lock); - } - - return 0; -} - -static struct clock_event_device mfgpt_clockevent = { - .name = "mfgpt", - .features = CLOCK_EVT_FEAT_PERIODIC, - - /* The oneshot mode have very high deviation, don't use it! */ - .set_state_shutdown = mfgpt_timer_shutdown, - .set_state_periodic = mfgpt_timer_set_periodic, - .irq = CS5536_MFGPT_INTR, -}; - -static irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - u32 basehi; - - /* - * get MFGPT base address - * - * NOTE: do not remove me, it's need for the value of mfgpt_base is - * variable - */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); - - /* ack */ - outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP); - - mfgpt_clockevent.event_handler(&mfgpt_clockevent); - - return IRQ_HANDLED; -} - -static struct irqaction irq5 = { - .handler = timer_interrupt, - .flags = IRQF_NOBALANCING | IRQF_TIMER, - .name = "timer" -}; - -/* - * Initialize the conversion factor and the min/max deltas of the clock event - * structure and register the clock event source with the framework. - */ -void __init setup_mfgpt0_timer(void) -{ - u32 basehi; - struct clock_event_device *cd = &mfgpt_clockevent; - unsigned int cpu = smp_processor_id(); - - cd->cpumask = cpumask_of(cpu); - clockevent_set_clock(cd, MFGPT_TICK_RATE); - cd->max_delta_ns = clockevent_delta2ns(0xffff, cd); - cd->max_delta_ticks = 0xffff; - cd->min_delta_ns = clockevent_delta2ns(0xf, cd); - cd->min_delta_ticks = 0xf; - - /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */ - _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100); - - /* Enable Interrupt Gate 5 */ - _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000); - - /* get MFGPT base address */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); - - clockevents_register_device(cd); - - setup_irq(CS5536_MFGPT_INTR, &irq5); -} - -/* - * Since the MFGPT overflows every tick, its not very useful - * to just read by itself. So use jiffies to emulate a free - * running counter: - */ -static u64 mfgpt_read(struct clocksource *cs) -{ - unsigned long flags; - int count; - u32 jifs; - static int old_count; - static u32 old_jifs; - - raw_spin_lock_irqsave(&mfgpt_lock, flags); - /* - * Although our caller may have the read side of xtime_lock, - * this is now a seqlock, and we are cheating in this routine - * by having side effects on state that we cannot undo if - * there is a collision on the seqlock and our caller has to - * retry. (Namely, old_jifs and old_count.) So we must treat - * jiffies as volatile despite the lock. We read jiffies - * before latching the timer count to guarantee that although - * the jiffies value might be older than the count (that is, - * the counter may underflow between the last point where - * jiffies was incremented and the point where we latch the - * count), it cannot be newer. - */ - jifs = jiffies; - /* read the count */ - count = inw(MFGPT0_CNT); - - /* - * It's possible for count to appear to go the wrong way for this - * reason: - * - * The timer counter underflows, but we haven't handled the resulting - * interrupt and incremented jiffies yet. - * - * Previous attempts to handle these cases intelligently were buggy, so - * we just do the simple thing now. - */ - if (count < old_count && jifs == old_jifs) - count = old_count; - - old_count = count; - old_jifs = jifs; - - raw_spin_unlock_irqrestore(&mfgpt_lock, flags); - - return (u64) (jifs * COMPARE) + count; -} - -static struct clocksource clocksource_mfgpt = { - .name = "mfgpt", - .rating = 120, /* Functional for real use, but not desired */ - .read = mfgpt_read, - .mask = CLOCKSOURCE_MASK(32), -}; - -int __init init_mfgpt_clocksource(void) -{ - if (num_possible_cpus() > 1) /* MFGPT does not scale! */ - return 0; - - return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE); -} - -arch_initcall(init_mfgpt_clocksource); diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c b/arch/mips/loongson64/common/cs5536/cs5536_ohci.c deleted file mode 100644 index 71a52b120317..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c +++ /dev/null @@ -1,145 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * the OHCI Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include -#include - -void pci_ohci_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - hi |= PCI_COMMAND_MASTER; - else - hi &= ~PCI_COMMAND_MASTER; - - if (value & PCI_COMMAND_MEMORY) - hi |= PCI_COMMAND_MEMORY; - else - hi &= ~PCI_COMMAND_MEMORY; - _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_BAR0_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_OHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if ((value & 0x01) == 0x00) { - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - lo = value; - _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); - - value &= 0xfffffff0; - hi = 0x40000000 | ((value & 0xff000000) >> 24); - lo = 0x000fffff | ((value & 0x00fff000) << 8); - _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo); - } - break; - case PCI_OHCI_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT); - if (value) /* enable all the usb interrupt in PIC */ - lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); - break; - default: - break; - } -} - -u32 pci_ohci_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - if (hi & PCI_COMMAND_MASTER) - conf_data |= PCI_COMMAND_MASTER; - if (hi & PCI_COMMAND_MEMORY) - conf_data |= PCI_COMMAND_MEMORY; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_OHCI_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - conf_data = - CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, - PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_OHCI_FLAG) { - conf_data = CS5536_OHCI_RANGE | - PCI_BASE_ADDRESS_SPACE_MEMORY; - lo &= ~SOFT_BAR_OHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - conf_data = lo & 0xffffff00; - conf_data &= ~0x0000000f; /* 32bit mem */ - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); - break; - case PCI_OHCI_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - if (((lo >> PIC_YSEL_LOW_USB_SHIFT) & 0xf) == CS5536_USB_INTR) - conf_data = 1; - break; - default: - break; - } - - return conf_data; -} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_pci.c b/arch/mips/loongson64/common/cs5536/cs5536_pci.c deleted file mode 100644 index 202c89b568ba..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_pci.c +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * read/write operation to the PCI config space of CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * the Virtual Support Module(VSM) for virtulizing the PCI - * configure space are defined in cs5536_modulename.c respectively, - * - * after this virtulizing, user can access the PCI configure space - * directly as a normal multi-function PCI device which follows - * the PCI-2.2 spec. - */ - -#include -#include -#include - -enum { - CS5536_FUNC_START = -1, - CS5536_ISA_FUNC, - reserved_func, - CS5536_IDE_FUNC, - CS5536_ACC_FUNC, - CS5536_OHCI_FUNC, - CS5536_EHCI_FUNC, - CS5536_FUNC_END, -}; - -static const cs5536_pci_vsm_write vsm_conf_write[] = { - [CS5536_ISA_FUNC] = pci_isa_write_reg, - [reserved_func] = NULL, - [CS5536_IDE_FUNC] = pci_ide_write_reg, - [CS5536_ACC_FUNC] = pci_acc_write_reg, - [CS5536_OHCI_FUNC] = pci_ohci_write_reg, - [CS5536_EHCI_FUNC] = pci_ehci_write_reg, -}; - -static const cs5536_pci_vsm_read vsm_conf_read[] = { - [CS5536_ISA_FUNC] = pci_isa_read_reg, - [reserved_func] = NULL, - [CS5536_IDE_FUNC] = pci_ide_read_reg, - [CS5536_ACC_FUNC] = pci_acc_read_reg, - [CS5536_OHCI_FUNC] = pci_ohci_read_reg, - [CS5536_EHCI_FUNC] = pci_ehci_read_reg, -}; - -/* - * write to PCI config space and transfer it to MSR write. - */ -void cs5536_pci_conf_write4(int function, int reg, u32 value) -{ - if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) - return; - if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0)) - return; - - if (vsm_conf_write[function] != NULL) - vsm_conf_write[function](reg, value); -} - -/* - * read PCI config space and transfer it to MSR access. - */ -u32 cs5536_pci_conf_read4(int function, int reg) -{ - u32 data = 0; - - if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) - return 0; - if ((reg < 0) || ((reg & 0x03) != 0)) - return 0; - if (reg > 0x100) - return 0xffffffff; - - if (vsm_conf_read[function] != NULL) - data = vsm_conf_read[function](reg); - - return data; -} diff --git a/arch/mips/loongson64/fuloong-2e/Makefile b/arch/mips/loongson64/fuloong-2e/Makefile deleted file mode 100644 index bb58edb3bea7..000000000000 --- a/arch/mips/loongson64/fuloong-2e/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for Lemote Fuloong2e mini-PC board. -# - -obj-y += irq.o reset.o dma.o diff --git a/arch/mips/loongson64/fuloong-2e/dma.c b/arch/mips/loongson64/fuloong-2e/dma.c deleted file mode 100644 index e122292bf666..000000000000 --- a/arch/mips/loongson64/fuloong-2e/dma.c +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include - -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - return paddr | 0x80000000; -} - -phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) -{ - return dma_addr & 0x7fffffff; -} diff --git a/arch/mips/loongson64/fuloong-2e/irq.c b/arch/mips/loongson64/fuloong-2e/irq.c deleted file mode 100644 index 32278e7bf85c..000000000000 --- a/arch/mips/loongson64/fuloong-2e/irq.c +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include - -#include -#include - -#include - -static void i8259_irqdispatch(void) -{ - int irq; - - irq = i8259_irq(); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); -} - -asmlinkage void mach_irq_dispatch(unsigned int pending) -{ - if (pending & CAUSEF_IP7) - do_IRQ(MIPS_CPU_IRQ_BASE + 7); - else if (pending & CAUSEF_IP6) /* perf counter loverflow */ - do_perfcnt_IRQ(); - else if (pending & CAUSEF_IP5) - i8259_irqdispatch(); - else if (pending & CAUSEF_IP2) - bonito_irqdispatch(); - else - spurious_interrupt(); -} - -static struct irqaction cascade_irqaction = { - .handler = no_action, - .name = "cascade", - .flags = IRQF_NO_THREAD, -}; - -void __init mach_init_irq(void) -{ - /* init all controller - * 0-15 ------> i8259 interrupt - * 16-23 ------> mips cpu interrupt - * 32-63 ------> bonito irq - */ - - /* most bonito irq should be level triggered */ - LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR | - LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES; - - /* Sets the first-level interrupt dispatcher. */ - mips_cpu_irq_init(); - init_i8259_irqs(); - bonito_irq_init(); - - /* bonito irq at IP2 */ - setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction); - /* 8259 irq at IP5 */ - setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction); -} diff --git a/arch/mips/loongson64/fuloong-2e/reset.c b/arch/mips/loongson64/fuloong-2e/reset.c deleted file mode 100644 index 8273de1cf4bb..000000000000 --- a/arch/mips/loongson64/fuloong-2e/reset.c +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* Board-specific reboot/shutdown routines - * Copyright (c) 2009 Philippe Vachon - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include - -void mach_prepare_reboot(void) -{ - LOONGSON_GENCFG &= ~(1 << 2); - LOONGSON_GENCFG |= (1 << 2); -} - -void mach_prepare_shutdown(void) -{ -} diff --git a/arch/mips/loongson64/lemote-2f/Makefile b/arch/mips/loongson64/lemote-2f/Makefile deleted file mode 100644 index 881a0ec06d1f..000000000000 --- a/arch/mips/loongson64/lemote-2f/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for lemote loongson2f family machines -# - -obj-y += clock.o machtype.o irq.o reset.o dma.o ec_kb3310b.o - -# -# Suspend Support -# - -obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/mips/loongson64/lemote-2f/clock.c b/arch/mips/loongson64/lemote-2f/clock.c deleted file mode 100644 index 8281334df9c8..000000000000 --- a/arch/mips/loongson64/lemote-2f/clock.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) 2006 - 2008 Lemote Inc. & Institute of Computing Technology - * Author: Yanhua, yanh@lemote.com - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -static LIST_HEAD(clock_list); -static DEFINE_SPINLOCK(clock_lock); -static DEFINE_MUTEX(clock_list_sem); - -/* Minimum CLK support */ -enum { - DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT, - DC_87PT, DC_DISABLE, DC_RESV -}; - -struct cpufreq_frequency_table loongson2_clockmod_table[] = { - {0, DC_RESV, CPUFREQ_ENTRY_INVALID}, - {0, DC_ZERO, CPUFREQ_ENTRY_INVALID}, - {0, DC_25PT, 0}, - {0, DC_37PT, 0}, - {0, DC_50PT, 0}, - {0, DC_62PT, 0}, - {0, DC_75PT, 0}, - {0, DC_87PT, 0}, - {0, DC_DISABLE, 0}, - {0, DC_RESV, CPUFREQ_TABLE_END}, -}; -EXPORT_SYMBOL_GPL(loongson2_clockmod_table); - -static struct clk cpu_clk = { - .name = "cpu_clk", - .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, - .rate = 800000000, -}; - -struct clk *clk_get(struct device *dev, const char *id) -{ - return &cpu_clk; -} -EXPORT_SYMBOL(clk_get); - -static void propagate_rate(struct clk *clk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clock_list, node) { - if (likely(clkp->parent != clk)) - continue; - if (likely(clkp->ops && clkp->ops->recalc)) - clkp->ops->recalc(clkp); - if (unlikely(clkp->flags & CLK_RATE_PROPAGATES)) - propagate_rate(clkp); - } -} - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (!clk) - return 0; - - return (unsigned long)clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int rate_khz = rate / 1000; - struct cpufreq_frequency_table *pos; - int ret = 0; - int regval; - - if (likely(clk->ops && clk->ops->set_rate)) { - unsigned long flags; - - spin_lock_irqsave(&clock_lock, flags); - ret = clk->ops->set_rate(clk, rate, 0); - spin_unlock_irqrestore(&clock_lock, flags); - } - - if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) - propagate_rate(clk); - - cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table) - if (rate_khz == pos->frequency) - break; - if (rate_khz != pos->frequency) - return -ENOTSUPP; - - clk->rate = rate; - - regval = LOONGSON_CHIPCFG(0); - regval = (regval & ~0x7) | (pos->driver_data - 1); - LOONGSON_CHIPCFG(0) = regval; - - return ret; -} -EXPORT_SYMBOL_GPL(clk_set_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (likely(clk->ops && clk->ops->round_rate)) { - unsigned long flags, rounded; - - spin_lock_irqsave(&clock_lock, flags); - rounded = clk->ops->round_rate(clk, rate); - spin_unlock_irqrestore(&clock_lock, flags); - - return rounded; - } - - return rate; -} -EXPORT_SYMBOL_GPL(clk_round_rate); diff --git a/arch/mips/loongson64/lemote-2f/dma.c b/arch/mips/loongson64/lemote-2f/dma.c deleted file mode 100644 index abf0e39d7e46..000000000000 --- a/arch/mips/loongson64/lemote-2f/dma.c +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include - -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - return paddr | 0x80000000; -} - -phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) -{ - if (dma_addr > 0x8fffffff) - return dma_addr; - return dma_addr & 0x0fffffff; -} diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c deleted file mode 100644 index d138220e96a2..000000000000 --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c +++ /dev/null @@ -1,125 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook - * - * Copyright (C) 2008 Lemote Inc. - * Author: liujl , 2008-04-20 - */ - -#include -#include -#include -#include - -#include "ec_kb3310b.h" - -static DEFINE_SPINLOCK(index_access_lock); -static DEFINE_SPINLOCK(port_access_lock); - -unsigned char ec_read(unsigned short addr) -{ - unsigned char value; - unsigned long flags; - - spin_lock_irqsave(&index_access_lock, flags); - outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); - outb((addr & 0x00ff), EC_IO_PORT_LOW); - value = inb(EC_IO_PORT_DATA); - spin_unlock_irqrestore(&index_access_lock, flags); - - return value; -} -EXPORT_SYMBOL_GPL(ec_read); - -void ec_write(unsigned short addr, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&index_access_lock, flags); - outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); - outb((addr & 0x00ff), EC_IO_PORT_LOW); - outb(val, EC_IO_PORT_DATA); - /* flush the write action */ - inb(EC_IO_PORT_DATA); - spin_unlock_irqrestore(&index_access_lock, flags); -} -EXPORT_SYMBOL_GPL(ec_write); - -/* - * This function is used for EC command writes and corresponding status queries. - */ -int ec_query_seq(unsigned char cmd) -{ - int timeout; - unsigned char status; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&port_access_lock, flags); - - /* make chip goto reset mode */ - udelay(EC_REG_DELAY); - outb(cmd, EC_CMD_PORT); - udelay(EC_REG_DELAY); - - /* check if the command is received by ec */ - timeout = EC_CMD_TIMEOUT; - status = inb(EC_STS_PORT); - while (timeout-- && (status & (1 << 1))) { - status = inb(EC_STS_PORT); - udelay(EC_REG_DELAY); - } - - spin_unlock_irqrestore(&port_access_lock, flags); - - if (timeout <= 0) { - printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); - ret = -EINVAL; - } else - printk(KERN_INFO - "(%x/%d)ec issued command %d status : 0x%x\n", - timeout, EC_CMD_TIMEOUT - timeout, cmd, status); - - return ret; -} -EXPORT_SYMBOL_GPL(ec_query_seq); - -/* - * Send query command to EC to get the proper event number - */ -int ec_query_event_num(void) -{ - return ec_query_seq(CMD_GET_EVENT_NUM); -} -EXPORT_SYMBOL(ec_query_event_num); - -/* - * Get event number from EC - * - * NOTE: This routine must follow the query_event_num function in the - * interrupt. - */ -int ec_get_event_num(void) -{ - int timeout = 100; - unsigned char value; - unsigned char status; - - udelay(EC_REG_DELAY); - status = inb(EC_STS_PORT); - udelay(EC_REG_DELAY); - while (timeout-- && !(status & (1 << 0))) { - status = inb(EC_STS_PORT); - udelay(EC_REG_DELAY); - } - if (timeout <= 0) { - pr_info("%s: get event number timeout.\n", __func__); - - return -EINVAL; - } - value = inb(EC_DAT_PORT); - udelay(EC_REG_DELAY); - - return value; -} -EXPORT_SYMBOL(ec_get_event_num); diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h b/arch/mips/loongson64/lemote-2f/ec_kb3310b.h deleted file mode 100644 index aecdbc9c875a..000000000000 --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h +++ /dev/null @@ -1,184 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * KB3310B Embedded Controller - * - * Copyright (C) 2008 Lemote Inc. - * Author: liujl , 2008-03-14 - */ - -#ifndef _EC_KB3310B_H -#define _EC_KB3310B_H - -extern unsigned char ec_read(unsigned short addr); -extern void ec_write(unsigned short addr, unsigned char val); -extern int ec_query_seq(unsigned char cmd); -extern int ec_query_event_num(void); -extern int ec_get_event_num(void); - -typedef int (*sci_handler) (int status); -extern sci_handler yeeloong_report_lid_status; - -#define SCI_IRQ_NUM 0x0A - -/* - * The following registers are determined by the EC index configuration. - * 1, fill the PORT_HIGH as EC register high part. - * 2, fill the PORT_LOW as EC register low part. - * 3, fill the PORT_DATA as EC register write data or get the data from it. - */ -#define EC_IO_PORT_HIGH 0x0381 -#define EC_IO_PORT_LOW 0x0382 -#define EC_IO_PORT_DATA 0x0383 - -/* - * EC delay time is 500us for register and status access - */ -#define EC_REG_DELAY 500 /* unit : us */ -#define EC_CMD_TIMEOUT 0x1000 - -/* - * EC access port for SCI communication - */ -#define EC_CMD_PORT 0x66 -#define EC_STS_PORT 0x66 -#define EC_DAT_PORT 0x62 -#define CMD_INIT_IDLE_MODE 0xdd -#define CMD_EXIT_IDLE_MODE 0xdf -#define CMD_INIT_RESET_MODE 0xd8 -#define CMD_REBOOT_SYSTEM 0x8c -#define CMD_GET_EVENT_NUM 0x84 -#define CMD_PROGRAM_PIECE 0xda - -/* temperature & fan registers */ -#define REG_TEMPERATURE_VALUE 0xF458 -#define REG_FAN_AUTO_MAN_SWITCH 0xF459 -#define BIT_FAN_AUTO 0 -#define BIT_FAN_MANUAL 1 -#define REG_FAN_CONTROL 0xF4D2 -#define BIT_FAN_CONTROL_ON (1 << 0) -#define BIT_FAN_CONTROL_OFF (0 << 0) -#define REG_FAN_STATUS 0xF4DA -#define BIT_FAN_STATUS_ON (1 << 0) -#define BIT_FAN_STATUS_OFF (0 << 0) -#define REG_FAN_SPEED_HIGH 0xFE22 -#define REG_FAN_SPEED_LOW 0xFE23 -#define REG_FAN_SPEED_LEVEL 0xF4CC -/* fan speed divider */ -#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ - -/* battery registers */ -#define REG_BAT_DESIGN_CAP_HIGH 0xF77D -#define REG_BAT_DESIGN_CAP_LOW 0xF77E -#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 -#define REG_BAT_FULLCHG_CAP_LOW 0xF781 -#define REG_BAT_DESIGN_VOL_HIGH 0xF782 -#define REG_BAT_DESIGN_VOL_LOW 0xF783 -#define REG_BAT_CURRENT_HIGH 0xF784 -#define REG_BAT_CURRENT_LOW 0xF785 -#define REG_BAT_VOLTAGE_HIGH 0xF786 -#define REG_BAT_VOLTAGE_LOW 0xF787 -#define REG_BAT_TEMPERATURE_HIGH 0xF788 -#define REG_BAT_TEMPERATURE_LOW 0xF789 -#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 -#define REG_BAT_RELATIVE_CAP_LOW 0xF493 -#define REG_BAT_VENDOR 0xF4C4 -#define FLAG_BAT_VENDOR_SANYO 0x01 -#define FLAG_BAT_VENDOR_SIMPLO 0x02 -#define REG_BAT_CELL_COUNT 0xF4C6 -#define FLAG_BAT_CELL_3S1P 0x03 -#define FLAG_BAT_CELL_3S2P 0x06 -#define REG_BAT_CHARGE 0xF4A2 -#define FLAG_BAT_CHARGE_DISCHARGE 0x01 -#define FLAG_BAT_CHARGE_CHARGE 0x02 -#define FLAG_BAT_CHARGE_ACPOWER 0x00 -#define REG_BAT_STATUS 0xF4B0 -#define BIT_BAT_STATUS_LOW (1 << 5) -#define BIT_BAT_STATUS_DESTROY (1 << 2) -#define BIT_BAT_STATUS_FULL (1 << 1) -#define BIT_BAT_STATUS_IN (1 << 0) -#define REG_BAT_CHARGE_STATUS 0xF4B1 -#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) -#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) -#define REG_BAT_STATE 0xF482 -#define BIT_BAT_STATE_CHARGING (1 << 1) -#define BIT_BAT_STATE_DISCHARGING (1 << 0) -#define REG_BAT_POWER 0xF440 -#define BIT_BAT_POWER_S3 (1 << 2) -#define BIT_BAT_POWER_ON (1 << 1) -#define BIT_BAT_POWER_ACIN (1 << 0) - -/* other registers */ -/* Audio: rd/wr */ -#define REG_AUDIO_VOLUME 0xF46C -#define REG_AUDIO_MUTE 0xF4E7 -#define REG_AUDIO_BEEP 0xF4D0 -/* USB port power or not: rd/wr */ -#define REG_USB0_FLAG 0xF461 -#define REG_USB1_FLAG 0xF462 -#define REG_USB2_FLAG 0xF463 -#define BIT_USB_FLAG_ON 1 -#define BIT_USB_FLAG_OFF 0 -/* LID */ -#define REG_LID_DETECT 0xF4BD -#define BIT_LID_DETECT_ON 1 -#define BIT_LID_DETECT_OFF 0 -/* CRT */ -#define REG_CRT_DETECT 0xF4AD -#define BIT_CRT_DETECT_PLUG 1 -#define BIT_CRT_DETECT_UNPLUG 0 -/* LCD backlight brightness adjust: 9 levels */ -#define REG_DISPLAY_BRIGHTNESS 0xF4F5 -/* Black screen Status */ -#define BIT_DISPLAY_LCD_ON 1 -#define BIT_DISPLAY_LCD_OFF 0 -/* LCD backlight control: off/restore */ -#define REG_BACKLIGHT_CTRL 0xF7BD -#define BIT_BACKLIGHT_ON 1 -#define BIT_BACKLIGHT_OFF 0 -/* Reset the machine auto-clear: rd/wr */ -#define REG_RESET 0xF4EC -#define BIT_RESET_ON 1 -/* Light the led: rd/wr */ -#define REG_LED 0xF4C8 -#define BIT_LED_RED_POWER (1 << 0) -#define BIT_LED_ORANGE_POWER (1 << 1) -#define BIT_LED_GREEN_CHARGE (1 << 2) -#define BIT_LED_RED_CHARGE (1 << 3) -#define BIT_LED_NUMLOCK (1 << 4) -/* Test led mode, all led on/off */ -#define REG_LED_TEST 0xF4C2 -#define BIT_LED_TEST_IN 1 -#define BIT_LED_TEST_OUT 0 -/* Camera on/off */ -#define REG_CAMERA_STATUS 0xF46A -#define BIT_CAMERA_STATUS_ON 1 -#define BIT_CAMERA_STATUS_OFF 0 -#define REG_CAMERA_CONTROL 0xF7B7 -#define BIT_CAMERA_CONTROL_OFF 0 -#define BIT_CAMERA_CONTROL_ON 1 -/* Wlan Status */ -#define REG_WLAN 0xF4FA -#define BIT_WLAN_ON 1 -#define BIT_WLAN_OFF 0 -#define REG_DISPLAY_LCD 0xF79F - -/* SCI Event Number from EC */ -enum { - EVENT_LID = 0x23, /* LID open/close */ - EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ - EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ - EVENT_OVERTEMP, /* Over-temperature happened */ - EVENT_CRT_DETECT, /* CRT is connected */ - EVENT_CAMERA, /* Camera on/off */ - EVENT_USB_OC2, /* USB2 Over Current occurred */ - EVENT_USB_OC0, /* USB0 Over Current occurred */ - EVENT_BLACK_SCREEN, /* Turn on/off backlight */ - EVENT_AUDIO_MUTE, /* Mute on/off */ - EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ - EVENT_AC_BAT, /* AC & Battery relative issue */ - EVENT_AUDIO_VOLUME, /* Volume adjust */ - EVENT_WLAN, /* Wlan on/off */ - EVENT_END -}; - -#endif /* !_EC_KB3310B_H */ diff --git a/arch/mips/loongson64/lemote-2f/irq.c b/arch/mips/loongson64/lemote-2f/irq.c deleted file mode 100644 index c58a044c6c07..000000000000 --- a/arch/mips/loongson64/lemote-2f/irq.c +++ /dev/null @@ -1,126 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2007 Lemote Inc. - * Author: Fuxin Zhang, zhangfx@lemote.com - */ - -#include -#include -#include - -#include -#include -#include - -#include -#include - -#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */ -#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */ -#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */ -#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */ - -#define LOONGSON_INT_BIT_INT0 (1 << 11) -#define LOONGSON_INT_BIT_INT1 (1 << 12) - -/* - * The generic i8259_irq() make the kernel hang on booting. Since we cannot - * get the irq via the IRR directly, we access the ISR instead. - */ -int mach_i8259_irq(void) -{ - int irq, isr; - - irq = -1; - - if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) { - raw_spin_lock(&i8259A_lock); - isr = inb(PIC_MASTER_CMD) & - ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR); - if (!isr) - isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8; - irq = ffs(isr) - 1; - if (unlikely(irq == 7)) { - /* - * This may be a spurious interrupt. - * - * Read the interrupt status register (ISR). If the most - * significant bit is not set then there is no valid - * interrupt. - */ - outb(0x0B, PIC_MASTER_ISR); /* ISR register */ - if (~inb(PIC_MASTER_ISR) & 0x80) - irq = -1; - } - raw_spin_unlock(&i8259A_lock); - } - - return irq; -} -EXPORT_SYMBOL(mach_i8259_irq); - -static void i8259_irqdispatch(void) -{ - int irq; - - irq = mach_i8259_irq(); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); -} - -void mach_irq_dispatch(unsigned int pending) -{ - if (pending & CAUSEF_IP7) - do_IRQ(LOONGSON_TIMER_IRQ); - else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ - do_perfcnt_IRQ(); - bonito_irqdispatch(); - } else if (pending & CAUSEF_IP3) /* CPU UART */ - do_IRQ(LOONGSON_UART_IRQ); - else if (pending & CAUSEF_IP2) /* South Bridge */ - i8259_irqdispatch(); - else - spurious_interrupt(); -} - -static irqreturn_t ip6_action(int cpl, void *dev_id) -{ - return IRQ_HANDLED; -} - -static struct irqaction ip6_irqaction = { - .handler = ip6_action, - .name = "cascade", - .flags = IRQF_SHARED | IRQF_NO_THREAD, -}; - -static struct irqaction cascade_irqaction = { - .handler = no_action, - .name = "cascade", - .flags = IRQF_NO_THREAD | IRQF_NO_SUSPEND, -}; - -void __init mach_init_irq(void) -{ - /* init all controller - * 0-15 ------> i8259 interrupt - * 16-23 ------> mips cpu interrupt - * 32-63 ------> bonito irq - */ - - /* setup cs5536 as high level trigger */ - LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1; - LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1); - - /* Sets the first-level interrupt dispatcher. */ - mips_cpu_irq_init(); - init_i8259_irqs(); - bonito_irq_init(); - - /* setup north bridge irq (bonito) */ - setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction); - /* setup source bridge irq (i8259) */ - setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction); -} diff --git a/arch/mips/loongson64/lemote-2f/machtype.c b/arch/mips/loongson64/lemote-2f/machtype.c deleted file mode 100644 index 9462a3ab57be..000000000000 --- a/arch/mips/loongson64/lemote-2f/machtype.c +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ -#include - -#include - -void __init mach_prom_init_machtype(void) -{ - /* We share the same kernel image file among Lemote 2F family - * of machines, and provide the machtype= kernel command l