From 7f19756325e4b30ed608bd358a4f0561308c9b6b Mon Sep 17 00:00:00 2001
From: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Date: Wed, 4 Aug 2010 14:42:08 +0200
Subject: arch/m68knommu: Removing dead RELOCATE config option

CONFIG_RELOCATE doesn't exist in Kconfig, therefore removing
all references to it from the source.

Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/68328/head-ram.S | 27 ---------------------------
 1 file changed, 27 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/68328/head-ram.S b/arch/m68knommu/platform/68328/head-ram.S
index 252b80b02038..7f1aeeacb219 100644
--- a/arch/m68knommu/platform/68328/head-ram.S
+++ b/arch/m68knommu/platform/68328/head-ram.S
@@ -67,33 +67,6 @@ pclp1:
 	beq	pclp1
 #endif /* DEBUG */
 
-#ifdef CONFIG_RELOCATE
-	/* Copy me to RAM */
-	moveal	#__rom_start, %a0
-	moveal	#_stext, %a1
-	moveal	#_edata, %a2
-
-	/* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
-	movel	%a0@+, %d0
-	movel	%d0, %a1@+
-	cmpal	%a1, %a2
-	bhi	LD1
-	
-#ifdef DEBUG
-	moveq	#74, %d7		/* 'J' */
-	moveb	%d7,0xfffff907          /* No absolute addresses */
-pclp2:
-	movew	0xfffff906, %d7
-	andw	#0x2000, %d7
-	beq	pclp2
-#endif /* DEBUG */
-	/* jump into the RAM copy */
-	jmp     ram_jump
-ram_jump:
-
-#endif /* CONFIG_RELOCATE */
-
 #ifdef DEBUG
 	moveq	#82, %d7		/* 'R' */
 	moveb	%d7,0xfffff907          /* No absolute addresses */
-- 
cgit v1.2.3


From 4a33fbcb3cdb0172e6e355a4ced3ca4d16622ffd Mon Sep 17 00:00:00 2001
From: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Date: Wed, 4 Aug 2010 14:42:34 +0200
Subject: arch/m68knommu: Removing dead RAM_{16,32}_MB config option

CONFIG_RAM_{16,32}_MB doesn't exist in Kconfig, therefore removing
all references to it from the source.

Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/68328/head-de2.S | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/68328/head-de2.S b/arch/m68knommu/platform/68328/head-de2.S
index 92d96456d363..f632fdcb93e9 100644
--- a/arch/m68knommu/platform/68328/head-de2.S
+++ b/arch/m68knommu/platform/68328/head-de2.S
@@ -1,11 +1,5 @@
 
-#if defined(CONFIG_RAM32MB)
-#define	MEM_END	0x02000000	/* Memory size 32Mb */
-#elif defined(CONFIG_RAM16MB)
-#define	MEM_END	0x01000000	/* Memory size 16Mb */
-#else
 #define	MEM_END	0x00800000	/* Memory size 8Mb */
-#endif
 
 #undef CRT_DEBUG
 
-- 
cgit v1.2.3


From 713e919e09492342eb8cd56f5aa7e3b33f672968 Mon Sep 17 00:00:00 2001
From: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Date: Wed, 4 Aug 2010 14:42:43 +0200
Subject: arch/m68knommu: Removing dead 68328_SERIAL_UART2 config option

CONFIG_68328_SERIAL_UART2 doesn't exist in Kconfig, therefore removing
all references to it from the source.

Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/68VZ328/config.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/68VZ328/config.c b/arch/m68knommu/platform/68VZ328/config.c
index fc5c63054e98..eabaabe8af36 100644
--- a/arch/m68knommu/platform/68VZ328/config.c
+++ b/arch/m68knommu/platform/68VZ328/config.c
@@ -90,11 +90,6 @@ static void init_hardware(char *command, int size)
 	PDIQEG &= ~PD(1);
 	PDIRQEN |= PD(1);			/* IRQ enabled */
 
-#ifdef CONFIG_68328_SERIAL_UART2
-	/* Enable RXD TXD port bits to enable UART2 */
-	PJSEL &= ~(PJ(5) | PJ(4));
-#endif
-
 #ifdef CONFIG_INIT_LCD
 	/* initialize LCD controller */
 	LSSA = (long) screen_bits;
-- 
cgit v1.2.3


From c8a2786b107873e34d540b8e3e54bd3cef03bc56 Mon Sep 17 00:00:00 2001
From: Philippe De Muyter <phdm@macqel.be>
Date: Tue, 17 Aug 2010 18:58:29 +0200
Subject: m68knommu: fix strace support for 68328/68360

strace enabled is marked using the `flags' field of the `thread_info' struct.
68360 version of entry.S did test a wrong bit in a wrong structure
(task_struct).

68328 version of entry.S did test the right bit in the right structure,
but wrongly, because the `flags' field is 32 bit wide, while the used
assembler insn (btst) only accesses a 8 bit byte in memory.

Fix both using code already used in the coldfire version of entry.S

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/68328/entry.S | 2 +-
 arch/m68knommu/platform/68360/entry.S | 7 ++++++-
 2 files changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S
index 9d80d2c42866..31a091708317 100644
--- a/arch/m68knommu/platform/68328/entry.S
+++ b/arch/m68knommu/platform/68328/entry.S
@@ -80,7 +80,7 @@ ENTRY(system_call)
 	movel	%sp,%d1			/* get thread_info pointer */
 	andl	#-THREAD_SIZE,%d1
 	movel	%d1,%a2
-	btst    #TIF_SYSCALL_TRACE,%a2@(TI_FLAGS)
+	btst	#(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
 	jne	do_trace
 	cmpl	#NR_syscalls,%d0
 	jcc	badsys
diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S
index 6d3460a39cac..d5ad4080f553 100644
--- a/arch/m68knommu/platform/68360/entry.S
+++ b/arch/m68knommu/platform/68360/entry.S
@@ -71,7 +71,12 @@ ENTRY(system_call)
 	jbsr	set_esp0
 	addql	#4,%sp
 
-	btst	#PF_TRACESYS_BIT,%a2@(TASK_FLAGS+PF_TRACESYS_OFF)
+	movel	%sp@(PT_OFF_ORIG_D0),%d0
+
+	movel	%sp,%d1			/* get thread_info pointer */
+	andl	#-THREAD_SIZE,%d1
+	movel	%d1,%a2
+	btst	#(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
 	jne	do_trace
 	cmpl	#NR_syscalls,%d0
 	jcc	badsys
-- 
cgit v1.2.3


From 03cbc3852710d30aa8548387ed1b1d87214f8ddb Mon Sep 17 00:00:00 2001
From: Philippe De Muyter <phdm@macqel.be>
Date: Thu, 19 Aug 2010 19:04:58 +0200
Subject: m68knommu: Document supported chips in intc-2.c and intc-simr.c.

The chips lists were in commit logs, but should also be in source files.
This way it is easier to choose the right source file for a not yet
supported Coldfire.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/coldfire/intc-2.c    | 6 +++++-
 arch/m68knommu/platform/coldfire/intc-simr.c | 2 ++
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/coldfire/intc-2.c b/arch/m68knommu/platform/coldfire/intc-2.c
index 5598c8b8661f..a0c72ec8e6b5 100644
--- a/arch/m68knommu/platform/coldfire/intc-2.c
+++ b/arch/m68knommu/platform/coldfire/intc-2.c
@@ -1,5 +1,9 @@
 /*
- * intc-1.c
+ * intc-2.c
+ *
+ * General interrupt controller code for the many ColdFire version 2 cores
+ * that use the two region INTC interrupt controller. This includes the
+ * 523x family, 5270, 5271, 5274, 5275, and the 528x families.
  *
  * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
  *
diff --git a/arch/m68knommu/platform/coldfire/intc-simr.c b/arch/m68knommu/platform/coldfire/intc-simr.c
index 1b01e79c2f63..8435ced33ac4 100644
--- a/arch/m68knommu/platform/coldfire/intc-simr.c
+++ b/arch/m68knommu/platform/coldfire/intc-simr.c
@@ -1,6 +1,8 @@
 /*
  * intc-simr.c
  *
+ * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts.
+ *
  * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
-- 
cgit v1.2.3


From 5061ea2cceca043ec99a52dd89f569567fc2cede Mon Sep 17 00:00:00 2001
From: Philippe De Muyter <phdm@macqel.be>
Date: Tue, 17 Aug 2010 18:52:39 +0200
Subject: m68knommu: whitespace cleanup in 68328/entry.S

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/68328/entry.S | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S
index 31a091708317..74229f73449e 100644
--- a/arch/m68knommu/platform/68328/entry.S
+++ b/arch/m68knommu/platform/68328/entry.S
@@ -43,7 +43,7 @@ badsys:
 	jra	ret_from_exception
 
 do_trace:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0)	/* needed for strace*/
+	movel	#-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
@@ -57,7 +57,7 @@ do_trace:
 	lea	sys_call_table, %a0
 	jbsr	%a0@(%d1)
 
-1:	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
+1:	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
@@ -71,9 +71,9 @@ ENTRY(system_call)
 	SAVE_ALL
 
 	/* save top of frame*/
-	pea     %sp@
-	jbsr    set_esp0
-	addql   #4,%sp
+	pea	%sp@
+	jbsr	set_esp0
+	addql	#4,%sp
 
 	movel	%sp@(PT_OFF_ORIG_D0),%d0
 
@@ -88,10 +88,10 @@ ENTRY(system_call)
 	lea	sys_call_table,%a0
 	movel	%a0@(%d0), %a0
 	jbsr	%a0@
-	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value*/
+	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value*/
 
 ret_from_exception:
-	btst	#5,%sp@(PT_OFF_SR)		/* check if returning to kernel*/
+	btst	#5,%sp@(PT_OFF_SR)	/* check if returning to kernel*/
 	jeq	Luser_return		/* if so, skip resched, signals*/
 
 Lkernel_return:
-- 
cgit v1.2.3


From 8851338dd09ed3544bb9a427ae04f1c481ce5456 Mon Sep 17 00:00:00 2001
From: Philippe De Muyter <phdm@macqel.be>
Date: Wed, 1 Sep 2010 15:23:28 +0200
Subject: m68knommu: add support for Coldfire 547x/548x interrupt controller

The Coldfire MCF547x/MCF548x have the same interrupt controller as
the MCF528x e.g., but only one, not two as in the MCF528x.  Modify
intc-2.c to support only one interrupt controller if MCFICM_INTC1 is
not defined.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/coldfire/intc-2.c | 40 ++++++++++++++++++++++++-------
 1 file changed, 32 insertions(+), 8 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/coldfire/intc-2.c b/arch/m68knommu/platform/coldfire/intc-2.c
index a0c72ec8e6b5..c23046cc6564 100644
--- a/arch/m68knommu/platform/coldfire/intc-2.c
+++ b/arch/m68knommu/platform/coldfire/intc-2.c
@@ -1,9 +1,11 @@
 /*
  * intc-2.c
  *
- * General interrupt controller code for the many ColdFire version 2 cores
- * that use the two region INTC interrupt controller. This includes the
- * 523x family, 5270, 5271, 5274, 5275, and the 528x families.
+ * General interrupt controller code for the many ColdFire cores that use
+ * interrupt controllers with 63 interrupt sources, organized as 56 fully-
+ * programmable + 7 fixed-level interrupt sources. This includes the 523x
+ * family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
+ * controllers, and the 547x and 548x families which have only one of them.
  *
  * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
  *
@@ -23,21 +25,37 @@
 #include <asm/traps.h>
 
 /*
- *	Each vector needs a unique priority and level asscoiated with it.
+ * Bit definitions for the ICR family of registers.
+ */
+#define MCFSIM_ICR_LEVEL(l)	((l)<<3)	/* Level l intr */
+#define MCFSIM_ICR_PRI(p)	(p)		/* Priority p intr */
+
+/*
+ *	Each vector needs a unique priority and level associated with it.
  *	We don't really care so much what they are, we don't rely on the
- *	tranditional priority interrupt scheme of the m68k/ColdFire.
+ *	traditional priority interrupt scheme of the m68k/ColdFire.
  */
-static u8 intc_intpri = 0x36;
+static u8 intc_intpri = MCFSIM_ICR_LEVEL(6) | MCFSIM_ICR_PRI(6);
+
+#ifdef MCFICM_INTC1
+#define NR_VECS	128
+#else
+#define NR_VECS	64
+#endif
 
 static void intc_irq_mask(unsigned int irq)
 {
-	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) {
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + NR_VECS)) {
 		unsigned long imraddr;
 		u32 val, imrbit;
 
 		irq -= MCFINT_VECBASE;
 		imraddr = MCF_IPSBAR;
+#ifdef MCFICM_INTC1
 		imraddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+		imraddr += MCFICM_INTC0;
+#endif
 		imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL;
 		imrbit = 0x1 << (irq & 0x1f);
 
@@ -48,13 +66,17 @@ static void intc_irq_mask(unsigned int irq)
 
 static void intc_irq_unmask(unsigned int irq)
 {
-	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) {
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + NR_VECS)) {
 		unsigned long intaddr, imraddr, icraddr;
 		u32 val, imrbit;
 
 		irq -= MCFINT_VECBASE;
 		intaddr = MCF_IPSBAR;
+#ifdef MCFICM_INTC1
 		intaddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+		intaddr += MCFICM_INTC0;
+#endif
 		imraddr = intaddr + ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL);
 		icraddr = intaddr + MCFINTC_ICR0 + (irq & 0x3f);
 		imrbit = 0x1 << (irq & 0x1f);
@@ -85,7 +107,9 @@ void __init init_IRQ(void)
 
 	/* Mask all interrupt sources */
 	__raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+#ifdef MCFICM_INTC1
 	__raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC1 + MCFINTC_IMRL);
+#endif
 
 	for (irq = 0; (irq < NR_IRQS); irq++) {
 		irq_desc[irq].status = IRQ_DISABLED;
-- 
cgit v1.2.3


From eb497e7b4996c4c6d2afaa19ee6a32aba867ae4c Mon Sep 17 00:00:00 2001
From: Philippe De Muyter <phdm@macqel.be>
Date: Mon, 30 Aug 2010 13:17:17 +0200
Subject: m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC.

In m68k/m68knommu assembly files, the same value is called sometimes
PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC.  Standardize
name to PT_OFF_FORMATVEC.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/68328/entry.S | 16 ++++++++--------
 arch/m68knommu/platform/68360/entry.S |  2 +-
 2 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S
index 74229f73449e..b3d8d7367481 100644
--- a/arch/m68knommu/platform/68328/entry.S
+++ b/arch/m68knommu/platform/68328/entry.S
@@ -133,7 +133,7 @@ Lreturn:
  */
 inthandler1:
 	SAVE_ALL
-	movew	%sp@(PT_OFF_VECTOR), %d0
+	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -144,7 +144,7 @@ inthandler1:
 
 inthandler2:
 	SAVE_ALL
-	movew	%sp@(PT_OFF_VECTOR), %d0
+	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -155,7 +155,7 @@ inthandler2:
 
 inthandler3:
 	SAVE_ALL
-	movew	%sp@(PT_OFF_VECTOR), %d0
+	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -166,7 +166,7 @@ inthandler3:
 
 inthandler4:
 	SAVE_ALL
-	movew	%sp@(PT_OFF_VECTOR), %d0
+	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -177,7 +177,7 @@ inthandler4:
 
 inthandler5:
 	SAVE_ALL
-	movew	%sp@(PT_OFF_VECTOR), %d0
+	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -188,7 +188,7 @@ inthandler5:
 
 inthandler6:
 	SAVE_ALL
-	movew	%sp@(PT_OFF_VECTOR), %d0
+	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -199,7 +199,7 @@ inthandler6:
 
 inthandler7:
 	SAVE_ALL
-	movew	%sp@(PT_OFF_VECTOR), %d0
+	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
@@ -210,7 +210,7 @@ inthandler7:
 
 inthandler:
 	SAVE_ALL
-	movew	%sp@(PT_OFF_VECTOR), %d0
+	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
 	movel	%sp,%sp@-
diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S
index d5ad4080f553..5c5047337f0b 100644
--- a/arch/m68knommu/platform/68360/entry.S
+++ b/arch/m68knommu/platform/68360/entry.S
@@ -129,7 +129,7 @@ Lreturn:
  */
 inthandler:
 	SAVE_ALL
-	movew	%sp@(PT_OFF_VECTOR), %d0
+	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and.l	#0x3ff, %d0
 	lsr.l   #0x02,  %d0
 
-- 
cgit v1.2.3


From 04570b46215f81001c94b2baea4af3284d6161ec Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Thu, 9 Sep 2010 17:12:53 +1000
Subject: m68knommu: stop using __do_IRQ

The use of __do_IRQ is deprecated, so lets stop using it.
Generally the interrupts on the supported processors here are
level triggered, so this is strait forward to switch over to
using the standard handle_level_irq flow handler. (Although
some ColdFire parts support edge triggered GPIO line  interrupts
we have no support for them yet).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/5272/intc.c          |  8 +++-----
 arch/m68knommu/platform/68328/ints.c         |  6 ++----
 arch/m68knommu/platform/68360/ints.c         |  6 ++----
 arch/m68knommu/platform/coldfire/intc-2.c    | 13 +++++++++----
 arch/m68knommu/platform/coldfire/intc-simr.c |  8 +++-----
 arch/m68knommu/platform/coldfire/intc.c      |  8 +++-----
 6 files changed, 22 insertions(+), 27 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/5272/intc.c b/arch/m68knommu/platform/5272/intc.c
index 7081e0a9720e..a61c9c288f40 100644
--- a/arch/m68knommu/platform/5272/intc.c
+++ b/arch/m68knommu/platform/5272/intc.c
@@ -128,11 +128,9 @@ void __init init_IRQ(void)
 	writel(0x88888888, MCF_MBAR + MCFSIM_ICR4);
 
 	for (irq = 0; (irq < NR_IRQS); irq++) {
-		irq_desc[irq].status = IRQ_DISABLED;
-		irq_desc[irq].action = NULL;
-		irq_desc[irq].depth = 1;
-		irq_desc[irq].chip = &intc_irq_chip;
-		intc_irq_set_type(irq, 0);
+		set_irq_chip(irq, &intc_irq_chip);
+		set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		set_irq_handler(irq, handle_level_irq);
 	}
 }
 
diff --git a/arch/m68knommu/platform/68328/ints.c b/arch/m68knommu/platform/68328/ints.c
index b91ee85d4b5d..865852806a17 100644
--- a/arch/m68knommu/platform/68328/ints.c
+++ b/arch/m68knommu/platform/68328/ints.c
@@ -179,10 +179,8 @@ void __init init_IRQ(void)
 	IMR = ~0;
 
 	for (i = 0; (i < NR_IRQS); i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-		irq_desc[i].chip = &intc_irq_chip;
+		set_irq_chip(irq, &intc_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
 	}
 }
 
diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c
index 6f22970d8c20..ad96ab1051f0 100644
--- a/arch/m68knommu/platform/68360/ints.c
+++ b/arch/m68knommu/platform/68360/ints.c
@@ -132,10 +132,8 @@ void init_IRQ(void)
 	pquicc->intr_cimr = 0x00000000;
 
 	for (i = 0; (i < NR_IRQS); i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-		irq_desc[i].chip = &intc_irq_chip;
+		set_irq_chip(irq, &intc_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
 	}
 }
 
diff --git a/arch/m68knommu/platform/coldfire/intc-2.c b/arch/m68knommu/platform/coldfire/intc-2.c
index c23046cc6564..85daa2b3001a 100644
--- a/arch/m68knommu/platform/coldfire/intc-2.c
+++ b/arch/m68knommu/platform/coldfire/intc-2.c
@@ -93,10 +93,16 @@ static void intc_irq_unmask(unsigned int irq)
 	}
 }
 
+static int intc_irq_set_type(unsigned int irq, unsigned int type)
+{
+	return 0;
+}
+
 static struct irq_chip intc_irq_chip = {
 	.name		= "CF-INTC",
 	.mask		= intc_irq_mask,
 	.unmask		= intc_irq_unmask,
+	.set_type	= intc_irq_set_type,
 };
 
 void __init init_IRQ(void)
@@ -112,10 +118,9 @@ void __init init_IRQ(void)
 #endif
 
 	for (irq = 0; (irq < NR_IRQS); irq++) {
-		irq_desc[irq].status = IRQ_DISABLED;
-		irq_desc[irq].action = NULL;
-		irq_desc[irq].depth = 1;
-		irq_desc[irq].chip = &intc_irq_chip;
+		set_irq_chip(irq, &intc_irq_chip);
+		set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		set_irq_handler(irq, handle_level_irq);
 	}
 }
 
diff --git a/arch/m68knommu/platform/coldfire/intc-simr.c b/arch/m68knommu/platform/coldfire/intc-simr.c
index 8435ced33ac4..bb7048636140 100644
--- a/arch/m68knommu/platform/coldfire/intc-simr.c
+++ b/arch/m68knommu/platform/coldfire/intc-simr.c
@@ -70,11 +70,9 @@ void __init init_IRQ(void)
 		__raw_writeb(0xff, MCFINTC1_SIMR);
 
 	for (irq = 0; (irq < NR_IRQS); irq++) {
-		irq_desc[irq].status = IRQ_DISABLED;
-		irq_desc[irq].action = NULL;
-		irq_desc[irq].depth = 1;
-		irq_desc[irq].chip = &intc_irq_chip;
-		intc_irq_set_type(irq, 0);
+		set_irq_chip(irq, &intc_irq_chip);
+		set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		set_irq_handler(irq, handle_level_irq);
 	}
 }
 
diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c
index a4560c86db71..60d2fcbe182b 100644
--- a/arch/m68knommu/platform/coldfire/intc.c
+++ b/arch/m68knommu/platform/coldfire/intc.c
@@ -143,11 +143,9 @@ void __init init_IRQ(void)
 	mcf_maskimr(0xffffffff);
 
 	for (irq = 0; (irq < NR_IRQS); irq++) {
-		irq_desc[irq].status = IRQ_DISABLED;
-		irq_desc[irq].action = NULL;
-		irq_desc[irq].depth = 1;
-		irq_desc[irq].chip = &intc_irq_chip;
-		intc_irq_set_type(irq, 0);
+		set_irq_chip(irq, &intc_irq_chip);
+		set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		set_irq_handler(irq, handle_level_irq);
 	}
 }
 
-- 
cgit v1.2.3


From ea49f8ffae6262e8de9a0d3e9fcdd384156c7e05 Mon Sep 17 00:00:00 2001
From: Philippe De Muyter <phdm@macqel.be>
Date: Mon, 20 Sep 2010 13:11:11 +0200
Subject: m68knommu: add basic mmu-less m548x support

Add a very basic mmu-less support for coldfire m548x family.  This is perhaps
also valid for m547x family.  The port comprises the serial, tick timer and
reboot support.  The gpio part compiles but is empty.  This gives a functional
albeit limited linux for the m548x coldfire family.  This has been tested
on a Freescale M548xEVB Lite board with a M5484 processor and the default
dbug monitor.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/548x/Makefile       |  18 ++++
 arch/m68knommu/platform/548x/config.c       | 115 ++++++++++++++++++++++
 arch/m68knommu/platform/coldfire/Makefile   |   1 +
 arch/m68knommu/platform/coldfire/sltimers.c | 145 ++++++++++++++++++++++++++++
 4 files changed, 279 insertions(+)
 create mode 100644 arch/m68knommu/platform/548x/Makefile
 create mode 100644 arch/m68knommu/platform/548x/config.c
 create mode 100644 arch/m68knommu/platform/coldfire/sltimers.c

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/548x/Makefile b/arch/m68knommu/platform/548x/Makefile
new file mode 100644
index 000000000000..e6035e7a2d3f
--- /dev/null
+++ b/arch/m68knommu/platform/548x/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for the m68knommu linux kernel.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this,  which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs. You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
+# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+#
+
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
+
+obj-y := config.o
+
diff --git a/arch/m68knommu/platform/548x/config.c b/arch/m68knommu/platform/548x/config.c
new file mode 100644
index 000000000000..9888846bd1cf
--- /dev/null
+++ b/arch/m68knommu/platform/548x/config.c
@@ -0,0 +1,115 @@
+/***************************************************************************/
+
+/*
+ *	linux/arch/m68knommu/platform/548x/config.c
+ *
+ *	Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/m548xsim.h>
+#include <asm/mcfuart.h>
+#include <asm/m548xgpt.h>
+
+/***************************************************************************/
+
+static struct mcf_platform_uart m548x_uart_platform[] = {
+	{
+		.mapbase	= MCF_MBAR + MCFUART_BASE1,
+		.irq		= 64 + 35,
+	},
+	{
+		.mapbase	= MCF_MBAR + MCFUART_BASE2,
+		.irq		= 64 + 34,
+	},
+	{
+		.mapbase	= MCF_MBAR + MCFUART_BASE3,
+		.irq		= 64 + 33,
+	},
+	{
+		.mapbase	= MCF_MBAR + MCFUART_BASE4,
+		.irq		= 64 + 32,
+	},
+};
+
+static struct platform_device m548x_uart = {
+	.name			= "mcfuart",
+	.id			= 0,
+	.dev.platform_data	= m548x_uart_platform,
+};
+
+static struct platform_device *m548x_devices[] __initdata = {
+	&m548x_uart,
+};
+
+
+/***************************************************************************/
+
+static void __init m548x_uart_init_line(int line, int irq)
+{
+	int rts_cts;
+
+	/* enable io pins */
+	switch (line) {
+	case 0:
+		rts_cts = 0; break;
+	case 1:
+		rts_cts = MCF_PAR_PSC_RTS_RTS; break;
+	case 2:
+		rts_cts = MCF_PAR_PSC_RTS_RTS | MCF_PAR_PSC_CTS_CTS; break;
+	case 3:
+		rts_cts = 0; break;
+	}
+	__raw_writeb(MCF_PAR_PSC_TXD | rts_cts | MCF_PAR_PSC_RXD,
+						MCF_MBAR + MCF_PAR_PSC(line));
+}
+
+static void __init m548x_uarts_init(void)
+{
+	const int nrlines = ARRAY_SIZE(m548x_uart_platform);
+	int line;
+
+	for (line = 0; (line < nrlines); line++)
+		m548x_uart_init_line(line, m548x_uart_platform[line].irq);
+}
+
+/***************************************************************************/
+
+static void mcf548x_reset(void)
+{
+	/* disable interrupts and enable the watchdog */
+	asm("movew #0x2700, %sr\n");
+	__raw_writel(0, MCF_MBAR + MCF_GPT_GMS0);
+	__raw_writel(MCF_GPT_GCIR_CNT(1), MCF_MBAR + MCF_GPT_GCIR0);
+	__raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4),
+						MCF_MBAR + MCF_GPT_GMS0);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_reset = mcf548x_reset;
+	m548x_uarts_init();
+}
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+
+	platform_add_devices(m548x_devices, ARRAY_SIZE(m548x_devices));
+	return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index f72a0e5d9996..df62171d986c 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_M528x)	+= pit.o intc-2.o
 obj-$(CONFIG_M5307)	+= timers.o intc.o
 obj-$(CONFIG_M532x)	+= timers.o intc-simr.o
 obj-$(CONFIG_M5407)	+= timers.o intc.o
+obj-$(CONFIG_M548x)	+= sltimers.o intc-2.o
 
 obj-y			+= pinmux.o gpio.o
 extra-y := head.o
diff --git a/arch/m68knommu/platform/coldfire/sltimers.c b/arch/m68knommu/platform/coldfire/sltimers.c
new file mode 100644
index 000000000000..0a1b937c3e18
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/sltimers.c
@@ -0,0 +1,145 @@
+/***************************************************************************/
+
+/*
+ *	sltimers.c -- generic ColdFire slice timer support.
+ *
+ *	Copyright (C) 2009-2010, Philippe De Muyter <phdm@macqel.be>
+ *	based on
+ *	timers.c -- generic ColdFire hardware timer support.
+ *	Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfslt.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+#ifdef CONFIG_HIGHPROFILE
+
+/*
+ *	By default use Slice Timer 1 as the profiler clock timer.
+ */
+#define	PA(a)	(MCF_MBAR + MCFSLT_TIMER1 + (a))
+
+/*
+ *	Choose a reasonably fast profile timer. Make it an odd value to
+ *	try and get good coverage of kernel operations.
+ */
+#define	PROFILEHZ	1013
+
+irqreturn_t mcfslt_profile_tick(int irq, void *dummy)
+{
+	/* Reset Slice Timer 1 */
+	__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, PA(MCFSLT_SSR));
+	if (current->pid)
+		profile_tick(CPU_PROFILING);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mcfslt_profile_irq = {
+	.name	 = "profile timer",
+	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.handler = mcfslt_profile_tick,
+};
+
+void mcfslt_profile_init(void)
+{
+	printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n",
+	       PROFILEHZ);
+
+	setup_irq(MCF_IRQ_PROFILER, &mcfslt_profile_irq);
+
+	/* Set up TIMER 2 as high speed profile clock */
+	__raw_writel(MCF_BUSCLK / PROFILEHZ - 1, PA(MCFSLT_STCNT));
+	__raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
+								PA(MCFSLT_SCR));
+
+}
+
+#endif	/* CONFIG_HIGHPROFILE */
+
+/***************************************************************************/
+
+/*
+ *	By default use Slice Timer 0 as the system clock timer.
+ */
+#define	TA(a)	(MCF_MBAR + MCFSLT_TIMER0 + (a))
+
+static u32 mcfslt_cycles_per_jiffy;
+static u32 mcfslt_cnt;
+
+static irqreturn_t mcfslt_tick(int irq, void *dummy)
+{
+	/* Reset Slice Timer 0 */
+	__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
+	mcfslt_cnt += mcfslt_cycles_per_jiffy;
+	return arch_timer_interrupt(irq, dummy);
+}
+
+static struct irqaction mcfslt_timer_irq = {
+	.name	 = "timer",
+	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.handler = mcfslt_tick,
+};
+
+static cycle_t mcfslt_read_clk(struct clocksource *cs)
+{
+	unsigned long flags;
+	u32 cycles;
+	u16 scnt;
+
+	local_irq_save(flags);
+	scnt = __raw_readl(TA(MCFSLT_SCNT));
+	cycles = mcfslt_cnt;
+	local_irq_restore(flags);
+
+	/* substract because slice timers count down */
+	return cycles - scnt;
+}
+
+static struct clocksource mcfslt_clk = {
+	.name	= "slt",
+	.rating	= 250,
+	.read	= mcfslt_read_clk,
+	.shift	= 20,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void hw_timer_init(void)
+{
+	mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ;
+	/*
+	 *	The coldfire slice timer (SLT) runs from STCNT to 0 included,
+	 *	then STCNT again and so on.  It counts thus actually
+	 *	STCNT + 1 steps for 1 tick, not STCNT.  So if you want
+	 *	n cycles, initialize STCNT with n - 1.
+	 */
+	__raw_writel(mcfslt_cycles_per_jiffy - 1, TA(MCFSLT_STCNT));
+	__raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
+								TA(MCFSLT_SCR));
+	/* initialize mcfslt_cnt knowing that slice timers count down */
+	mcfslt_cnt = mcfslt_cycles_per_jiffy;
+
+	setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
+
+	mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift);
+	clocksource_register(&mcfslt_clk);
+
+#ifdef CONFIG_HIGHPROFILE
+	mcfslt_profile_init();
+#endif
+}
-- 
cgit v1.2.3


From dea2aff876c004cccf29549242c93b208787aa64 Mon Sep 17 00:00:00 2001
From: matt mooney <mfm@muteddisk.com>
Date: Wed, 22 Sep 2010 23:50:45 -0700
Subject: m68knommu: change to new flag variables

Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/5206/Makefile     | 4 ++--
 arch/m68knommu/platform/5206e/Makefile    | 4 ++--
 arch/m68knommu/platform/520x/Makefile     | 4 ++--
 arch/m68knommu/platform/523x/Makefile     | 4 ++--
 arch/m68knommu/platform/5249/Makefile     | 4 ++--
 arch/m68knommu/platform/5272/Makefile     | 4 ++--
 arch/m68knommu/platform/527x/Makefile     | 4 ++--
 arch/m68knommu/platform/528x/Makefile     | 4 ++--
 arch/m68knommu/platform/5307/Makefile     | 4 ++--
 arch/m68knommu/platform/532x/Makefile     | 4 ++--
 arch/m68knommu/platform/5407/Makefile     | 4 ++--
 arch/m68knommu/platform/coldfire/Makefile | 4 ++--
 12 files changed, 24 insertions(+), 24 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/5206/Makefile b/arch/m68knommu/platform/5206/Makefile
index 113c33390064..b5db05625cfa 100644
--- a/arch/m68knommu/platform/5206/Makefile
+++ b/arch/m68knommu/platform/5206/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs.  You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5206e/Makefile b/arch/m68knommu/platform/5206e/Makefile
index 113c33390064..b5db05625cfa 100644
--- a/arch/m68knommu/platform/5206e/Makefile
+++ b/arch/m68knommu/platform/5206e/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs.  You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile
index 435ab3483dc1..ad3f4e5a57ce 100644
--- a/arch/m68knommu/platform/520x/Makefile
+++ b/arch/m68knommu/platform/520x/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs.  You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/523x/Makefile b/arch/m68knommu/platform/523x/Makefile
index b8f9b45440c2..c04b8f71c88c 100644
--- a/arch/m68knommu/platform/523x/Makefile
+++ b/arch/m68knommu/platform/523x/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs.  You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5249/Makefile b/arch/m68knommu/platform/5249/Makefile
index f56225d1582f..4bed30fd0073 100644
--- a/arch/m68knommu/platform/5249/Makefile
+++ b/arch/m68knommu/platform/5249/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs.  You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5272/Makefile b/arch/m68knommu/platform/5272/Makefile
index 93673ef8e2c1..34110fc14301 100644
--- a/arch/m68knommu/platform/5272/Makefile
+++ b/arch/m68knommu/platform/5272/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs.  You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/527x/Makefile b/arch/m68knommu/platform/527x/Makefile
index 3d90e6d92459..6ac4b57370ea 100644
--- a/arch/m68knommu/platform/527x/Makefile
+++ b/arch/m68knommu/platform/527x/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs.  You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/528x/Makefile b/arch/m68knommu/platform/528x/Makefile
index 3d90e6d92459..6ac4b57370ea 100644
--- a/arch/m68knommu/platform/528x/Makefile
+++ b/arch/m68knommu/platform/528x/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs.  You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile
index 6de526976828..d4293b791f2e 100644
--- a/arch/m68knommu/platform/5307/Makefile
+++ b/arch/m68knommu/platform/5307/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs. You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/532x/Makefile b/arch/m68knommu/platform/532x/Makefile
index 4cc23245bcd1..ce01669399c6 100644
--- a/arch/m68knommu/platform/532x/Makefile
+++ b/arch/m68knommu/platform/532x/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs. You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5407/Makefile b/arch/m68knommu/platform/5407/Makefile
index dee62c5dbaa6..e83fe148eddc 100644
--- a/arch/m68knommu/platform/5407/Makefile
+++ b/arch/m68knommu/platform/5407/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs. You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index df62171d986c..45f501fa4525 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -8,8 +8,8 @@
 # on the console port whenever a DBG interrupt occurs. You have to
 # set up you HW breakpoints to trigger a DBG interrupt:
 #
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
 #
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-- 
cgit v1.2.3


From a405f833f4cd6490caaf381efe58a5628b545733 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 13 Oct 2010 13:42:22 +1000
Subject: m68knommu: support the external GPIO based interrupts of the 5272

The external GPIO interrupts of the ColdFire 5272 SoC are edge triggered,
unlike the internal interrupt sources (which are level triggered).

Add proper support for these interrupts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/5272/intc.c | 56 +++++++++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 5 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/5272/intc.c b/arch/m68knommu/platform/5272/intc.c
index a61c9c288f40..3cf681c177aa 100644
--- a/arch/m68knommu/platform/5272/intc.c
+++ b/arch/m68knommu/platform/5272/intc.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <asm/coldfire.h>
@@ -29,6 +30,10 @@
  * via a set of 4 "Interrupt Controller Registers" (ICR). There is a
  * loose mapping of vector number to register and internal bits, but
  * a table is the easiest and quickest way to map them.
+ *
+ * Note that the external interrupts are edge triggered (unlike the
+ * internal interrupt sources which are level triggered). Which means
+ * they also need acknowledgeing via acknowledge bits.
  */
 struct irqmap {
 	unsigned char	icr;
@@ -68,6 +73,11 @@ static struct irqmap intc_irqmap[MCFINT_VECMAX - MCFINT_VECBASE] = {
 	/*MCF_IRQ_SWTO*/	{ .icr = MCFSIM_ICR4, .index = 16, .ack = 0, },
 };
 
+/*
+ * The act of masking the interrupt also has a side effect of 'ack'ing
+ * an interrupt on this irq (for the external irqs). So this mask function
+ * is also an ack_mask function.
+ */
 static void intc_irq_mask(unsigned int irq)
 {
 	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
@@ -95,7 +105,9 @@ static void intc_irq_ack(unsigned int irq)
 		irq -= MCFINT_VECBASE;
 		if (intc_irqmap[irq].ack) {
 			u32 v;
-			v = 0xd << intc_irqmap[irq].index;
+			v = readl(MCF_MBAR + intc_irqmap[irq].icr);
+			v &= (0x7 << intc_irqmap[irq].index);
+			v |= (0x8 << intc_irqmap[irq].index);
 			writel(v, MCF_MBAR + intc_irqmap[irq].icr);
 		}
 	}
@@ -103,21 +115,47 @@ static void intc_irq_ack(unsigned int irq)
 
 static int intc_irq_set_type(unsigned int irq, unsigned int type)
 {
-	/* We can set the edge type here for external interrupts */
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		irq -= MCFINT_VECBASE;
+		if (intc_irqmap[irq].ack) {
+			u32 v;
+			v = readl(MCF_MBAR + MCFSIM_PITR);
+			if (type == IRQ_TYPE_EDGE_FALLING)
+				v &= ~(0x1 << (32 - irq));
+			else
+				v |= (0x1 << (32 - irq));
+			writel(v, MCF_MBAR + MCFSIM_PITR);
+		}
+	}
 	return 0;
 }
 
+/*
+ * Simple flow handler to deal with the external edge triggered interrupts.
+ * We need to be careful with the masking/acking due to the side effects
+ * of masking an interrupt.
+ */
+static void intc_external_irq(unsigned int irq, struct irq_desc *desc)
+{
+	kstat_incr_irqs_this_cpu(irq, desc);
+	desc->status |= IRQ_INPROGRESS;
+	desc->chip->ack(irq);
+	handle_IRQ_event(irq, desc->action);
+	desc->status &= ~IRQ_INPROGRESS;
+}
+
 static struct irq_chip intc_irq_chip = {
 	.name		= "CF-INTC",
 	.mask		= intc_irq_mask,
 	.unmask		= intc_irq_unmask,
+	.mask_ack	= intc_irq_mask,
 	.ack		= intc_irq_ack,
 	.set_type	= intc_irq_set_type,
 };
 
 void __init init_IRQ(void)
 {
-	int irq;
+	int irq, edge;
 
 	init_vectors();
 
@@ -129,8 +167,16 @@ void __init init_IRQ(void)
 
 	for (irq = 0; (irq < NR_IRQS); irq++) {
 		set_irq_chip(irq, &intc_irq_chip);
-		set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
-		set_irq_handler(irq, handle_level_irq);
+		edge = 0;
+		if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX))
+			edge = intc_irqmap[irq - MCFINT_VECBASE].ack;
+		if (edge) {
+			set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+			set_irq_handler(irq, intc_external_irq);
+		} else {
+			set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+			set_irq_handler(irq, handle_level_irq);
+		}
 	}
 }
 
-- 
cgit v1.2.3


From 41a2159b5b662e74a85b4824e3517f2397cc5867 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 12 Oct 2010 12:24:49 +1000
Subject: m68knommu: some boards use fixed phy for FEC ethernet

Define a fixed phy setup for use on boarts that directly connect the
FEC ethernet controller to a switch.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/5272/config.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index 59278c0887d0..65bb582734e1 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -13,6 +13,8 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
@@ -148,9 +150,23 @@ void __init config_BSP(char *commandp, int size)
 
 /***************************************************************************/
 
+/*
+ * Some 5272 based boards have the FEC ethernet diectly connected to
+ * an ethernet switch. In this case we need to use the fixed phy type,
+ * and we need to declare it early in boot.
+ */
+static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
+	.link	= 1,
+	.speed	= 100,
+	.duplex	= 0,
+};
+
+/***************************************************************************/
+
 static int __init init_BSP(void)
 {
 	m5272_uarts_init();
+	fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
 	platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
 	return 0;
 }
-- 
cgit v1.2.3


From 55f411de484a0136a77d050e877578a60bc2e094 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 22 Oct 2010 15:12:34 +1000
Subject: m68knommu: convert to using tracehook_report_syscall_*

Break up syscall_trace() into separate entry and exit routines that use
tracehook_report_syscall_entry() and tracehook_report_syscall_exit().

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/68328/entry.S    | 4 ++--
 arch/m68knommu/platform/68360/entry.S    | 4 ++--
 arch/m68knommu/platform/coldfire/entry.S | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch/m68knommu/platform')

diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S
index b3d8d7367481..27241e16a526 100644
--- a/arch/m68knommu/platform/68328/entry.S
+++ b/arch/m68knommu/platform/68328/entry.S
@@ -46,7 +46,7 @@ do_trace:
 	movel	#-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
+	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
 	movel	%sp@(PT_OFF_ORIG_D0),%d1
@@ -60,7 +60,7 @@ do_trace:
 1:	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
+	jbsr	syscall_trace_leave
 
 ret_from_signal:
 	RESTORE_SWITCH_STACK
diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S
index 5c5047337f0b..c131c6e1d92d 100644
--- a/arch/m68knommu/platform/68360/entry.S
+++ b/arch/m68knommu/platform/68360/entry.S
@@ -42,7 +42,7 @@ do_trace:
 	movel	#-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
+	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
 	movel	%sp@(PT_OFF_ORIG_D0),%d1
@@ -56,7 +56,7 @@ do_trace:
 1:	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
+	jbsr	syscall_trace_leave
 
 ret_from_signal:
 	RESTORE_SWITCH_STACK
diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S
index dd7d591f70ea..c8eb0e01e2ec 100644
--- a/arch/m68knommu/platform/coldfire/entry.S
+++ b/arch/m68knommu/platform/coldfire/entry.S
@@ -88,7 +88,7 @@ ENTRY(system_call)
 	movel	%d2,PT_OFF_D0(%sp)	/* on syscall entry */
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
+	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
 	movel	%d3,%a0
@@ -96,7 +96,7 @@ ENTRY(system_call)
 	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
+	jbsr	syscall_trace_leave
 
 ret_from_signal:
 	RESTORE_SWITCH_STACK
-- 
cgit v1.2.3