From 3c6b38d45fa51c7c51c5e2347fc1a6bef6a46525 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 May 2018 10:06:34 +0200 Subject: regulator: wm8994: Pass descriptor instead of GPIO number Instead of passing a global GPIO number for the enable GPIO, pass a descriptor looked up from the device tree node or the board file decriptor table for the regulator. There is a single board file passing the GPIOs for LDO1 and LDO2 through platform data, so augment this to pass descriptors associated with the i2c device as well. The special GPIO enable DT property for the enable GPIO is nonstandard but this was accomodated in commit 6a537d48461deacc57c07ed86d9915e5aa4b3539 "gpio: of: Support regulator nonstandard GPIO properties". Signed-off-by: Linus Walleij Acked-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 5aa472892465..76c4855a03bc 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -194,8 +194,8 @@ static struct wm8994_pdata wm8994_pdata = { 0x3, /* IRQ out, active high, CMOS */ }, .ldo = { - { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, }, - { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, }, + { .init_data = &wm8994_ldo1, }, + { .init_data = &wm8994_ldo2, }, }, }; @@ -203,6 +203,18 @@ static const struct i2c_board_info wm1277_devs[] = { { I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */ .platform_data = &wm8994_pdata, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + .dev_name = "wm8958", + }, +}; + +static struct gpiod_lookup_table wm8994_gpiod_table = { + .dev_id = "i2c-wm8958", /* I2C device name */ + .table = { + GPIO_LOOKUP("GPION", 6, + "wlf,ldo1ena", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPION", 4, + "wlf,ldo2ena", GPIO_ACTIVE_HIGH), + { }, }, }; @@ -381,6 +393,7 @@ static int wlf_gf_module_probe(struct i2c_client *i2c, gpiod_add_lookup_table(&wm5102_reva_gpiod_table); gpiod_add_lookup_table(&wm5102_gpiod_table); + gpiod_add_lookup_table(&wm8994_gpiod_table); if (i < ARRAY_SIZE(gf_mods)) { dev_info(&i2c->dev, "%s revision %d\n", -- cgit v1.2.3