From 1ffbecdd8321a8eb38503b63a9018995b872ed95 Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Tue, 16 May 2017 15:07:21 +0300 Subject: arm64: dts: add DPAA FMan nodes Add the DPAA 1.x FMan nodes for the ARM based platforms. Using separate files for each port as not all ports are used on all devices. Different numbering of ports is also possible on different devices. Signed-off-by: Madalin Bucur Signed-off-by: Shawn Guo --- .../boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi (limited to 'arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi') diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi new file mode 100644 index 000000000000..d534f770f729 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ FMan v3 1g port #5 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman@1a00000 { + fman0_rx_0x0d: port@8d000 { + cell-index = <0xd>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8d000 0x1000>; + }; + + fman0_tx_0x2d: port@ad000 { + cell-index = <0x2d>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xad000 0x1000>; + }; + + ethernet@ea000 { + cell-index = <5>; + compatible = "fsl,fman-memac"; + reg = <0xea000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy5>; + }; + + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + + pcsphy5: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; -- cgit v1.2.3