From 4166b3036e930fab7328688d26770a20752e76f0 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 14 Mar 2017 20:01:51 +0100 Subject: dt-bindings: mmc: tegra: Reformat compatible string list The list of compatible strings is somewhat difficult to read and extend. Reformat it into a list to make it more easily extensible. While at it, also remove the "plus one of the above" clause because it isn't actually valid. Signed-off-by: Thierry Reding Signed-off-by: Ulf Hansson --- .../devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index 15b8368ee1f2..c15aa22d4570 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -7,11 +7,12 @@ This file documents differences between the core properties described by mmc.txt and the properties used by the sdhci-tegra driver. Required properties: -- compatible : For Tegra20, must contain "nvidia,tegra20-sdhci". - For Tegra30, must contain "nvidia,tegra30-sdhci". For Tegra114, - must contain "nvidia,tegra114-sdhci". For Tegra124, must contain - "nvidia,tegra124-sdhci". Otherwise, must contain "nvidia,-sdhci", - plus one of the above, where is tegra132 or tegra210. +- compatible : should be one of: + - "nvidia,tegra20-sdhci": for Tegra20 + - "nvidia,tegra30-sdhci": for Tegra30 + - "nvidia,tegra114-sdhci": for Tegra114 + - "nvidia,tegra124-sdhci": for Tegra124 and Tegra132 + - "nvidia,tegra210-sdhci": for Tegra210 - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. - resets : Must contain an entry for each entry in reset-names. -- cgit v1.2.3 From e8ce6742f809bcb1bbc8d9ce27d72ee1de7a551a Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 14 Mar 2017 20:01:52 +0100 Subject: dt-bindings: mmc: tegra: Document Tegra186 compatible string The SDHCI controller found on Tegra186 in very similar to the controller found on earlier generations of Tegra. Signed-off-by: Thierry Reding Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index c15aa22d4570..9bce57862ed6 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -13,6 +13,7 @@ Required properties: - "nvidia,tegra114-sdhci": for Tegra114 - "nvidia,tegra124-sdhci": for Tegra124 and Tegra132 - "nvidia,tegra210-sdhci": for Tegra210 + - "nvidia,tegra186-sdhci": for Tegra186 - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. - resets : Must contain an entry for each entry in reset-names. -- cgit v1.2.3 From ebdb4d8e0d2577bd8e1d0d54e1c2e9445bdc90e6 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Wed, 8 Mar 2017 10:19:01 +0100 Subject: dt-bindings: Add binding for brcm,bcm2835-sdhost. This is the other SD controller on the platform, which can be swapped to the role of SD card host using pin muxing. Signed-off-by: Eric Anholt Signed-off-by: Gerd Hoffmann Acked-by: Rob Herring Signed-off-by: Ulf Hansson --- .../bindings/mmc/brcm,bcm2835-sdhost.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt new file mode 100644 index 000000000000..d876580ae3b8 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt @@ -0,0 +1,23 @@ +Broadcom BCM2835 SDHOST controller + +This file documents differences between the core properties described +by mmc.txt and the properties that represent the BCM2835 controller. + +Required properties: +- compatible: Should be "brcm,bcm2835-sdhost". +- clocks: The clock feeding the SDHOST controller. + +Optional properties: +- dmas: DMA channel for read and write. + See Documentation/devicetree/bindings/dma/dma.txt for details + +Example: + +sdhost: mmc@7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 13>; + dma-names = "rx-tx"; +}; -- cgit v1.2.3 From 474e25e15f508889d4f8c672ab54323743ee595b Mon Sep 17 00:00:00 2001 From: Chris Brandt Date: Wed, 22 Mar 2017 10:42:09 -0400 Subject: mmc: sh_mmcif: Document r7s72100 DT bindings Signed-off-by: Chris Brandt Reviewed-by: Geert Uytterhoeven Reviewed-by: Simon Horman Acked-by: Rob Herring Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/renesas,mmcif.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt index e4ba92aa035e..c32dc5a9dbe6 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt +++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt @@ -8,6 +8,7 @@ Required properties: - compatible: should be "renesas,mmcif-", "renesas,sh-mmcif" as a fallback. Examples with are: + - "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs - "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs - "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs @@ -17,6 +18,13 @@ Required properties: - "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs - "renesas,mmcif-sh73a0" for the MMCIF found in sh73a0 SoCs +- interrupts: Some SoCs have only 1 shared interrupt, while others have either + 2 or 3 individual interrupts (error, int, card detect). Below is the number + of interrupts for each SoC: + 1: r8a73a4, r8a7778, r8a7790, r8a7791, r8a7793, r8a7794 + 2: r8a7740, sh73a0 + 3: r7s72100 + - clocks: reference to the functional clock - dmas: reference to the DMA channels, one per channel name listed in the -- cgit v1.2.3 From 50fde5637b6b66555036bd815c01e0aa38d38859 Mon Sep 17 00:00:00 2001 From: yong mao Date: Wed, 15 Mar 2017 15:26:38 +0800 Subject: mmc: dt-bindings: update Mediatek MMC bindings Add description for mediatek,hs200-cmd-int-delay Add description for mediatek,hs400-cmd-int-delay Add description for mediatek,hs400-cmd-resp-sel-rising Signed-off-by: Yong Mao Acked-by: Rob Herring Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/mtk-sd.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt index 0120c7f1109c..4182ea36ca5b 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -21,6 +21,15 @@ Optional properties: - assigned-clocks: PLL of the source clock - assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock - hs400-ds-delay: HS400 DS delay setting +- mediatek,hs200-cmd-int-delay: HS200 command internal delay setting. + This field has total 32 stages. + The value is an integer from 0 to 31. +- mediatek,hs400-cmd-int-delay: HS400 command internal delay setting + This field has total 32 stages. + The value is an integer from 0 to 31. +- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection + If present,HS400 command responses are sampled on rising edges. + If not present,HS400 command responses are sampled on falling edges. Examples: mmc0: mmc@11230000 { @@ -38,4 +47,7 @@ mmc0: mmc@11230000 { assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; hs400-ds-delay = <0x14015>; + mediatek,hs200-cmd-int-delay = <26>; + mediatek,hs400-cmd-int-delay = <14>; + mediatek,hs400-cmd-resp-sel-rising; }; -- cgit v1.2.3 From 6f4b0919020a482e41af4e715efaa79f45f6cde6 Mon Sep 17 00:00:00 2001 From: Piotr Sroka Date: Tue, 21 Mar 2017 14:33:01 +0000 Subject: dt-bindings: mmc: add description of PHY delays for sdhci-cadence DTS properties are used instead of fixed data because PHY settings can be different for different chips/boards. Add description of new DLL PHY delays. Signed-off-by: Piotr Sroka Reviewed-by: Masahiro Yamada Acked-by: Rob Herring Signed-off-by: Ulf Hansson --- .../devicetree/bindings/mmc/sdhci-cadence.txt | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt index c0f37cb41a9b..fa423c277853 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt @@ -19,6 +19,53 @@ if supported. See mmc.txt for details. - mmc-hs400-1_8v - mmc-hs400-1_2v +Some PHY delays can be configured by following properties. +PHY DLL input delays: +They are used to delay the data valid window, and align the window +to sampling clock. The delay starts from 5ns (for delay parameter equal to 0) +and it is increased by 2.5ns in each step. +- cdns,phy-input-delay-sd-highspeed: + Value of the delay in the input path for SD high-speed timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-legacy: + Value of the delay in the input path for legacy timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-sdr12: + Value of the delay in the input path for SD UHS SDR12 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-sdr25: + Value of the delay in the input path for SD UHS SDR25 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-sdr50: + Value of the delay in the input path for SD UHS SDR50 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-ddr50: + Value of the delay in the input path for SD UHS DDR50 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-mmc-highspeed: + Value of the delay in the input path for MMC high-speed timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-mmc-ddr: + Value of the delay in the input path for eMMC high-speed DDR timing + Valid range = [0:0x1F]. + +PHY DLL clock delays: +Each delay property represents the fraction of the clock period. +The approximate delay value will be +(/128)*sdmclk_clock_period. +- cdns,phy-dll-delay-sdclk: + Value of the delay introduced on the sdclk output + for all modes except HS200, HS400 and HS400_ES. + Valid range = [0:0x7F]. +- cdns,phy-dll-delay-sdclk-hsmmc: + Value of the delay introduced on the sdclk output + for HS200, HS400 and HS400_ES speed modes. + Valid range = [0:0x7F]. +- cdns,phy-dll-delay-strobe: + Value of the delay introduced on the dat_strobe input + used in HS400 / HS400_ES speed modes. + Valid range = [0:0x7F]. + Example: emmc: sdhci@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; @@ -29,4 +76,5 @@ Example: mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; + cdns,phy-dll-delay-sdclk = <0>; }; -- cgit v1.2.3 From d5cc7c80bafca02e9150a2af5ccab1aa0aa8be20 Mon Sep 17 00:00:00 2001 From: Sergio Prado Date: Fri, 31 Mar 2017 20:50:55 -0300 Subject: dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller Adds the device tree bindings description for Samsung S3C24XX MMC/SD/SDIO controller, used as a connectivity interface with external MMC, SD and SDIO storage mediums. Acked-by: Rob Herring Signed-off-by: Sergio Prado Signed-off-by: Ulf Hansson --- .../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt new file mode 100644 index 000000000000..5f68feb9f9d6 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt @@ -0,0 +1,42 @@ +* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings + +Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface +with external MMC, SD and SDIO storage mediums. + +This file documents differences between the core mmc properties described by +mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller +implementation. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "samsung,s3c2410-sdi": for controllers compatible with s3c2410 + - "samsung,s3c2412-sdi": for controllers compatible with s3c2412 + - "samsung,s3c2440-sdi": for controllers compatible with s3c2440 +- reg: register location and length +- interrupts: mmc controller interrupt +- clocks: Should reference the controller clock +- clock-names: Should contain "sdi" + +Required Board Specific Properties: +- pinctrl-0: Should specify pin control groups used for this controller. +- pinctrl-names: Should contain only one value - "default". + +Optional Properties: +- bus-width: number of data lines (see mmc.txt) +- cd-gpios: gpio for card detection (see mmc.txt) +- wp-gpios: gpio for write protection (see mmc.txt) + +Example: + + mmc0: mmc@5a000000 { + compatible = "samsung,s3c2440-sdi"; + pinctrl-names = "default"; + pinctrl-0 = <&sdi_pins>; + reg = <0x5a000000 0x100000>; + interrupts = <0 0 21 3>; + clocks = <&clocks PCLK_SDI>; + clock-names = "sdi"; + bus-width = <4>; + cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>; + }; -- cgit v1.2.3 From b658af718465cd1e8011c8da281befdfc2debefd Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 13 Mar 2017 14:36:37 +0200 Subject: mmc: mmc: Add functions to enable / disable the Command Queue Add helper functions to enable or disable the Command Queue. Signed-off-by: Adrian Hunter Reviewed-by: Linus Walleij Signed-off-by: Ulf Hansson --- Documentation/mmc/mmc-dev-attrs.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt index 404a0e9e92b0..dcd1252877fb 100644 --- a/Documentation/mmc/mmc-dev-attrs.txt +++ b/Documentation/mmc/mmc-dev-attrs.txt @@ -30,6 +30,7 @@ All attributes are read-only. rel_sectors Reliable write sector count ocr Operation Conditions Register dsr Driver Stage Register + cmdq_en Command Queue enabled: 1 => enabled, 0 => not enabled Note on Erase Size and Preferred Erase Size: -- cgit v1.2.3 From dc5aee3f9f454c35d4e092873b103dc791119e0e Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Thu, 30 Mar 2017 17:31:23 +0200 Subject: dt-bindings: mmc: Add Cavium SOCs MMC bindings Add description of Cavium Octeon and ThunderX SOC device tree bindings. CC: Ulf Hansson CC: Rob Herring CC: Mark Rutland CC: devicetree@vger.kernel.org Signed-off-by: Jan Glauber Signed-off-by: David Daney Signed-off-by: Steven J. Hill Acked-by: Rob Herring Signed-off-by: Ulf Hansson --- .../devicetree/bindings/mmc/cavium-mmc.txt | 57 ++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/cavium-mmc.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/cavium-mmc.txt b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt new file mode 100644 index 000000000000..1433e6201dff --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt @@ -0,0 +1,57 @@ +* Cavium Octeon & ThunderX MMC controller + +The highspeed MMC host controller on Caviums SoCs provides an interface +for MMC and SD types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.41 as well +as the speed of SD standard 4.0. Only 3.3 Volt is supported. + +Required properties: + - compatible : should be one of: + cavium,octeon-6130-mmc + cavium,octeon-7890-mmc + cavium,thunder-8190-mmc + cavium,thunder-8390-mmc + mmc-slot + - reg : mmc controller base registers + - clocks : phandle + +Optional properties: + - for cd, bus-width and additional generic mmc parameters + please refer to mmc.txt within this directory + - cavium,cmd-clk-skew : number of coprocessor clocks before sampling command + - cavium,dat-clk-skew : number of coprocessor clocks before sampling data + +Deprecated properties: +- spi-max-frequency : use max-frequency instead +- cavium,bus-max-width : use bus-width instead +- power-gpios : use vmmc-supply instead +- cavium,octeon-6130-mmc-slot : use mmc-slot instead + +Examples: + mmc_1_4: mmc@1,4 { + compatible = "cavium,thunder-8390-mmc"; + reg = <0x0c00 0 0 0 0>; /* DEVFN = 0x0c (1:4) */ + #address-cells = <1>; + #size-cells = <0>; + clocks = <&sclk>; + + mmc-slot@0 { + compatible = "mmc-slot"; + reg = <0>; + vmmc-supply = <&mmc_supply_3v3>; + max-frequency = <42000000>; + bus-width = <4>; + cap-sd-highspeed; + }; + + mmc-slot@1 { + compatible = "mmc-slot"; + reg = <1>; + vmmc-supply = <&mmc_supply_3v3>; + max-frequency = <42000000>; + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + }; + }; -- cgit v1.2.3 From 66c659cf5cda6f21c0f7832b735c180a9f99a790 Mon Sep 17 00:00:00 2001 From: Hu Ziji Date: Thu, 30 Mar 2017 17:22:58 +0200 Subject: dt: bindings: Add bindings for Marvell Xenon SD Host Controller Marvell Xenon SDHC can support eMMC/SD/SDIO. Add Xenon-specific properties. Also add properties for Xenon PHY setting. Signed-off-by: Hu Ziji Signed-off-by: Gregory CLEMENT Acked-by: Rob Herring Signed-off-by: Ulf Hansson --- .../bindings/mmc/marvell,xenon-sdhci.txt | 170 +++++++++++++++++++++ 1 file changed, 170 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt new file mode 100644 index 000000000000..b878a1e305af --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt @@ -0,0 +1,170 @@ +Marvell Xenon SDHCI Controller device tree bindings +This file documents differences between the core mmc properties +described by mmc.txt and the properties used by the Xenon implementation. + +Multiple SDHCs might be put into a single Xenon IP, to save size and cost. +Each SDHC is independent and owns independent resources, such as register sets, +clock and PHY. +Each SDHC should have an independent device tree node. + +Required Properties: +- compatible: should be one of the following + - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC. + Must provide a second register area and marvell,pad-type. + - "marvell,armada-ap806-sdhci": For controllers on Armada AP806. + - "marvell,armada-cp110-sdhci": For controllers on Armada CP110. + +- clocks: + Array of clocks required for SDHC. + Require at least input clock for Xenon IP core. + +- clock-names: + Array of names corresponding to clocks property. + The input clock for Xenon IP core should be named as "core". + +- reg: + * For "marvell,armada-3700-sdhci", two register areas. + The first one for Xenon IP register. The second one for the Armada 3700 SoC + PHY PAD Voltage Control register. + Please follow the examples with compatible "marvell,armada-3700-sdhci" + in below. + Please also check property marvell,pad-type in below. + + * For other compatible strings, one register area for Xenon IP. + +Optional Properties: +- marvell,xenon-sdhc-id: + Indicate the corresponding bit index of current SDHC in + SDHC System Operation Control Register Bit[7:0]. + Set/clear the corresponding bit to enable/disable current SDHC. + If Xenon IP contains only one SDHC, this property is optional. + +- marvell,xenon-phy-type: + Xenon support multiple types of PHYs. + To select eMMC 5.1 PHY, set: + marvell,xenon-phy-type = "emmc 5.1 phy" + eMMC 5.1 PHY is the default choice if this property is not provided. + To select eMMC 5.0 PHY, set: + marvell,xenon-phy-type = "emmc 5.0 phy" + + All those types of PHYs can support eMMC, SD and SDIO. + Please note that this property only presents the type of PHY. + It doesn't stand for the entire SDHC type or property. + For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only + supports eMMC 5.1. + +- marvell,xenon-phy-znr: + Set PHY ZNR value. + Only available for eMMC PHY. + Valid range = [0:0x1F]. + ZNR is set as 0xF by default if this property is not provided. + +- marvell,xenon-phy-zpr: + Set PHY ZPR value. + Only available for eMMC PHY. + Valid range = [0:0x1F]. + ZPR is set as 0xF by default if this property is not provided. + +- marvell,xenon-phy-nr-success-tun: + Set the number of required consecutive successful sampling points + used to identify a valid sampling window, in tuning process. + Valid range = [1:7]. + Set as 0x4 by default if this property is not provided. + +- marvell,xenon-phy-tun-step-divider: + Set the divider for calculating TUN_STEP. + Set as 64 by default if this property is not provided. + +- marvell,xenon-phy-slow-mode: + If this property is selected, transfers will bypass PHY. + Only available when bus frequency lower than 55MHz in SDR mode. + Disabled by default. Please only try this property if timing issues + always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, + SD Default Speed and HS mode and eMMC legacy speed mode. + +- marvell,xenon-tun-count: + Xenon SDHC SoC usually doesn't provide re-tuning counter in + Capabilities Register 3 Bit[11:8]. + This property provides the re-tuning counter. + If this property is not set, default re-tuning counter will + be set as 0x9 in driver. + +- marvell,pad-type: + Type of Armada 3700 SoC PHY PAD Voltage Controller register. + Only valid when "marvell,armada-3700-sdhci" is selected. + Two types: "sd" and "fixed-1-8v". + If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is + switched to 1.8V when later in higher speed mode. + If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC. + Please follow the examples with compatible "marvell,armada-3700-sdhci" + in below. + +Example: +- For eMMC: + + sdhci@aa0000 { + compatible = "marvell,armada-ap806-sdhci"; + reg = <0xaa0000 0x1000>; + interrupts = + clocks = <&emmc_clk>; + clock-names = "core"; + bus-width = <4>; + marvell,xenon-phy-slow-mode; + marvell,xenon-tun-count = <11>; + non-removable; + no-sd; + no-sdio; + + /* Vmmc and Vqmmc are both fixed */ + }; + +- For SD/SDIO: + + sdhci@ab0000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0xab0000 0x1000>; + interrupts = + vqmmc-supply = <&sd_vqmmc_regulator>; + vmmc-supply = <&sd_vmmc_regulator>; + clocks = <&sdclk>; + clock-names = "core"; + bus-width = <4>; + marvell,xenon-tun-count = <9>; + }; + +- For eMMC with compatible "marvell,armada-3700-sdhci": + + sdhci@aa0000 { + compatible = "marvell,armada-3700-sdhci"; + reg = <0xaa0000 0x1000>, + ; + interrupts = + clocks = <&emmcclk>; + clock-names = "core"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + + /* Vmmc and Vqmmc are both fixed */ + + marvell,pad-type = "fixed-1-8v"; + }; + +- For SD/SDIO with compatible "marvell,armada-3700-sdhci": + + sdhci@ab0000 { + compatible = "marvell,armada-3700-sdhci"; + reg = <0xab0000 0x1000>, + ; + interrupts = + vqmmc-supply = <&sd_regulator>; + /* Vmmc is fixed */ + clocks = <&sdclk>; + clock-names = "core"; + bus-width = <4>; + + marvell,pad-type = "sd"; + }; -- cgit v1.2.3