From 80c94557e94f25df5df00fd94e2a58bf31230fce Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 16 Mar 2019 21:25:51 +0100 Subject: regulator: gpio: Reword the binding document Reword the binding document to make it clear how the propeties work and which properties affect which other properties. Signed-off-by: Marek Vasut Cc: Harald Geyer Cc: Kuninori Morimoto Cc: Linus Walleij Cc: Mark Brown Cc: Rob Herring Cc: linux-renesas-soc@vger.kernel.org To: devicetree@vger.kernel.org Signed-off-by: Mark Brown --- .../bindings/regulator/gpio-regulator.txt | 30 ++++++++++++++++------ 1 file changed, 22 insertions(+), 8 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt index 1f496159e2bb..dd25e73b5d79 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt @@ -4,16 +4,30 @@ Required properties: - compatible : Must be "regulator-gpio". - regulator-name : Defined in regulator.txt as optional, but required here. -- states : Selection of available voltages and GPIO configs. - if there are no states, then use a fixed regulator +- gpios : Array of one or more GPIO pins used to select the + regulator voltage/current listed in "states". +- states : Selection of available voltages/currents provided by + this regulator and matching GPIO configurations to + achieve them. If there are no states in the "states" + array, use a fixed regulator instead. Optional properties: -- enable-gpio : GPIO to use to enable/disable the regulator. -- gpios : GPIO group used to control voltage. -- gpios-states : gpios pin's initial states array. 0: LOW, 1: HIGH. - defualt is LOW if nothing is specified. +- enable-gpios : GPIO used to enable/disable the regulator. + Warning, the GPIO phandle flags are ignored and the + GPIO polarity is controlled solely by the presence + of "enable-active-high" DT property. This is due to + compatibility with old DTs. +- enable-active-high : Polarity of "enable-gpio" GPIO is active HIGH. + Default is active LOW. +- gpios-states : On operating systems, that don't support reading back + gpio values in output mode (most notably linux), this + array provides the state of GPIO pins set when + requesting them from the gpio controller. Systems, + that are capable of preserving state when requesting + the lines, are free to ignore this property. + 0: LOW, 1: HIGH. Default is LOW if nothing else + is specified. - startup-delay-us : Startup time in microseconds. -- enable-active-high : Polarity of GPIO is active high (default is low). - regulator-type : Specifies what is being regulated, must be either "voltage" or "current", defaults to voltage. @@ -30,7 +44,7 @@ Example: regulator-max-microvolt = <2600000>; regulator-boot-on; - enable-gpio = <&gpio0 23 0x4>; + enable-gpios = <&gpio0 23 0x4>; gpios = <&gpio0 24 0x4 &gpio0 25 0x4>; states = <1800000 0x3 -- cgit v1.2.3 From c29687c354c58cd56fb2529fb89266c280206cf9 Mon Sep 17 00:00:00 2001 From: Pascal PAILLET-LME Date: Mon, 15 Apr 2019 09:17:37 +0000 Subject: dt-bindings: regulator: Add stm32mp1 pwr regulators Document devicetree bindings for stm32mp1 pwr regulators. Signed-off-by: Pascal Paillet Signed-off-by: Mark Brown --- .../bindings/regulator/st,stm32mp1-pwr-reg.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt new file mode 100644 index 000000000000..e372dd3f0c8a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt @@ -0,0 +1,43 @@ +STM32MP1 PWR Regulators +----------------------- + +Available Regulators in STM32MP1 PWR block are: + - reg11 for regulator 1V1 + - reg18 for regulator 1V8 + - usb33 for the swtich USB3V3 + +Required properties: +- compatible: Must be "st,stm32mp1,pwr-reg" +- list of child nodes that specify the regulator reg11, reg18 or usb33 + initialization data for defined regulators. The definition for each of + these nodes is defined using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. +- vdd-supply: phandle to the parent supply/regulator node for vdd input +- vdd_3v3_usbfs-supply: phandle to the parent supply/regulator node for usb33 + +Example: + +pwr_regulators: pwr@50001000 { + compatible = "st,stm32mp1,pwr-reg"; + reg = <0x50001000 0x10>; + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + + reg11: reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18: reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33: usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; -- cgit v1.2.3