From 326fa4399f6723201c10d77d3a18675915c56097 Mon Sep 17 00:00:00 2001 From: Luca Ceresoli Date: Wed, 2 Sep 2020 16:22:57 +0200 Subject: dt-bindings: mfd: lp87565: Convert to yaml Also apply a few smaller improvements: - document that the only possible I2C slave address is 0x60 as per the datasheet and fix the second example accordingly - The definition of "xxx-in-supply" was generic, thus define in detail the possible cases for each chip variant - remove "MFD driver" from the title as it is implementation specific - replace "PMIC" with "buck converter" in title as it is more informative Signed-off-by: Luca Ceresoli Reviewed-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/lp87565.txt | 79 ----------------------- 1 file changed, 79 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/lp87565.txt (limited to 'Documentation/devicetree/bindings/mfd/lp87565.txt') diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt b/Documentation/devicetree/bindings/mfd/lp87565.txt deleted file mode 100644 index 41671e0dc26b..000000000000 --- a/Documentation/devicetree/bindings/mfd/lp87565.txt +++ /dev/null @@ -1,79 +0,0 @@ -TI LP87565 PMIC MFD driver - -Required properties: - - compatible: "ti,lp87565", "ti,lp87565-q1" - - reg: I2C slave address. - - gpio-controller: Marks the device node as a GPIO Controller. - - #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - xxx-in-supply: Phandle to parent supply node of each regulator - populated under regulators node. xxx should match - the supply_name populated in driver. -Example: - -lp87565_pmic: pmic@60 { - compatible = "ti,lp87565-q1"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - - buck10-in-supply = <&vsys_3v3>; - buck23-in-supply = <&vsys_3v3>; - - regulators: regulators { - buck10_reg: buck10 { - /* VDD_MPU */ - regulator-name = "buck10"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - buck23_reg: buck23 { - /* VDD_GPU */ - regulator-name = "buck23"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-boot-on; - regulator-always-on; - }; - }; -}; - -TI LP87561 PMIC: - -This is a single output 4-phase regulator configuration - -Required properties: - - compatible: "ti,lp87561-q1" - - reg: I2C slave address. - - gpio-controller: Marks the device node as a GPIO Controller. - - #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - xxx-in-supply: Phandle to parent supply node of each regulator - populated under regulators node. xxx should match - the supply_name populated in driver. -Example: - -lp87561_pmic: pmic@62 { - compatible = "ti,lp87561-q1"; - reg = <0x62>; - gpio-controller; - #gpio-cells = <2>; - - buck3210-in-supply = <&vsys_3v3>; - - regulators: regulators { - buck3210_reg: buck3210 { - /* VDD_CORE */ - regulator-name = "buck3210"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-always-on; - regulator-boot-on; - }; - }; -}; -- cgit v1.2.3