From f718c54c1abab7171d375112bffd199046749953 Mon Sep 17 00:00:00 2001 From: Guillermo Rodriguez Date: Fri, 13 May 2016 13:09:37 +0200 Subject: pwm: atmel: Fix disabling of PWM channels When disabling a PWM channel, the PWM clock was being stopped immediately after writing to PWM_DIS. As a result, the disabling of the PWM channel did not complete properly, and the PWM output might be left at the wrong level. Fix this by waiting for the channel to be effectively disabled (by checking the PWM_SR register) before disabling the clock. Signed-off-by: Guillermo Rodriguez Acked-by: Alexandre Belloni Signed-off-by: Thierry Reding --- drivers/pwm/pwm-atmel.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c index 0e4bd4e8e582..f3df529737f2 100644 --- a/drivers/pwm/pwm-atmel.c +++ b/drivers/pwm/pwm-atmel.c @@ -271,6 +271,16 @@ static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) mutex_unlock(&atmel_pwm->isr_lock); atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm); + /* + * Wait for the PWM channel disable operation to be effective before + * stopping the clock. + */ + timeout = jiffies + 2 * HZ; + + while ((atmel_pwm_readl(atmel_pwm, PWM_SR) & (1 << pwm->hwpwm)) && + time_before(jiffies, timeout)) + usleep_range(10, 100); + clk_disable(atmel_pwm->clk); } -- cgit v1.2.3