From b4bc9f9e27edd8de76d44675c8f0c6c2ccb6b22c Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Wed, 11 Sep 2019 19:47:07 +0200 Subject: cpufreq: ti-cpufreq: add support for omap34xx and omap36xx This adds code and tables to read the silicon revision and eFuse (speed binned / 720 MHz grade) bits for selecting opp-v2 table entries. Since these bits are not always part of the syscon register range (like for am33xx, am43, dra7), we add code to directly read the register values using ioremap() if syscon access fails. The format of the opp-supported-hw entries is that it has two 32 bit bitfields. E.g.: opp-supported-hw = <0xffffffff 3> The first value is matched against the bit position of the silicon revision which is (see TRM) omap34xx: BIT(0) ES1.0 BIT(1) ES2.0 BIT(2) ES2.1 BIT(3) ES3.0 BIT(4) ES3.1 BIT(7) ES3.1.2 omap36xx: BIT(0) ES1.0 BIT(1) ES1.1 BIT(2) ES1.2 The second value is matched against the speed grade eFuse: BIT(0) no high speed OPP BIT(1) high speed OPP This means for the example above that it is always enabled while e.g. opp-supported-hw = <0x1 2> enables the OPP only for ES1.0 BIT(0) and if the high speed eFuse is set BIT(1). Signed-off-by: H. Nikolaus Schaller Reviewed-by: Tony Lindgren Tested-by: Adam Ford Signed-off-by: Viresh Kumar --- drivers/cpufreq/ti-cpufreq.c | 91 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 89 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c index aeaa883a8c9d..13d426559333 100644 --- a/drivers/cpufreq/ti-cpufreq.c +++ b/drivers/cpufreq/ti-cpufreq.c @@ -31,6 +31,11 @@ #define DRA7_EFUSE_OD_MPU_OPP BIT(1) #define DRA7_EFUSE_HIGH_MPU_OPP BIT(2) +#define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C +#define OMAP3_CONTROL_IDCODE 0x4830A204 +#define OMAP34xx_ProdID_SKUID 0x4830A20C +#define OMAP3_SYSCON_BASE (0x48000000 + 0x2000 + 0x270) + #define VERSION_COUNT 2 struct ti_cpufreq_data; @@ -85,6 +90,13 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data, return calculated_efuse; } +static unsigned long omap3_efuse_xlate(struct ti_cpufreq_data *opp_data, + unsigned long efuse) +{ + /* OPP enable bit ("Speed Binned") */ + return BIT(efuse); +} + static struct ti_cpufreq_soc_data am3x_soc_data = { .efuse_xlate = amx3_efuse_xlate, .efuse_fallback = AM33XX_800M_ARM_MPU_MAX_FREQ, @@ -112,6 +124,56 @@ static struct ti_cpufreq_soc_data dra7_soc_data = { .multi_regulator = true, }; +/* + * OMAP35x TRM (SPRUF98K): + * CONTROL_IDCODE (0x4830 A204) describes Silicon revisions. + * Control OMAP Status Register 15:0 (Address 0x4800 244C) + * to separate between omap3503, omap3515, omap3525, omap3530 + * and feature presence. + * There are encodings for versions limited to 400/266MHz + * but we ignore. + * Not clear if this also holds for omap34xx. + * some eFuse values e.g. CONTROL_FUSE_OPP1_VDD1 + * are stored in the SYSCON register range + * Register 0x4830A20C [ProdID.SKUID] [0:3] + * 0x0 for normal 600/430MHz device. + * 0x8 for 720/520MHz device. + * Not clear what omap34xx value is. + */ + +static struct ti_cpufreq_soc_data omap34xx_soc_data = { + .efuse_xlate = omap3_efuse_xlate, + .efuse_offset = OMAP34xx_ProdID_SKUID - OMAP3_SYSCON_BASE, + .efuse_shift = 3, + .efuse_mask = BIT(3), + .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, + .multi_regulator = false, +}; + +/* + * AM/DM37x TRM (SPRUGN4M) + * CONTROL_IDCODE (0x4830 A204) describes Silicon revisions. + * Control Device Status Register 15:0 (Address 0x4800 244C) + * to separate between am3703, am3715, dm3725, dm3730 + * and feature presence. + * Speed Binned = Bit 9 + * 0 800/600 MHz + * 1 1000/800 MHz + * some eFuse values e.g. CONTROL_FUSE_OPP 1G_VDD1 + * are stored in the SYSCON register range. + * There is no 0x4830A20C [ProdID.SKUID] register (exists but + * seems to always read as 0). + */ + +static struct ti_cpufreq_soc_data omap36xx_soc_data = { + .efuse_xlate = omap3_efuse_xlate, + .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE, + .efuse_shift = 9, + .efuse_mask = BIT(9), + .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, + .multi_regulator = false, +}; + /** * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC * @opp_data: pointer to ti_cpufreq_data context @@ -128,7 +190,17 @@ static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data, ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset, &efuse); - if (ret) { + if (ret == -EIO) { + /* not a syscon register! */ + void __iomem *regs = ioremap(OMAP3_SYSCON_BASE + + opp_data->soc_data->efuse_offset, 4); + + if (!regs) + return -ENOMEM; + efuse = readl(regs); + iounmap(regs); + } + else if (ret) { dev_err(dev, "Failed to read the efuse value from syscon: %d\n", ret); @@ -159,7 +231,17 @@ static int ti_cpufreq_get_rev(struct ti_cpufreq_data *opp_data, ret = regmap_read(opp_data->syscon, opp_data->soc_data->rev_offset, &revision); - if (ret) { + if (ret == -EIO) { + /* not a syscon register! */ + void __iomem *regs = ioremap(OMAP3_SYSCON_BASE + + opp_data->soc_data->rev_offset, 4); + + if (!regs) + return -ENOMEM; + revision = readl(regs); + iounmap(regs); + } + else if (ret) { dev_err(dev, "Failed to read the revision number from syscon: %d\n", ret); @@ -191,6 +273,11 @@ static const struct of_device_id ti_cpufreq_of_match[] = { { .compatible = "ti,am33xx", .data = &am3x_soc_data, }, { .compatible = "ti,am43", .data = &am4x_soc_data, }, { .compatible = "ti,dra7", .data = &dra7_soc_data }, + { .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, }, + { .compatible = "ti,omap36xx", .data = &omap36xx_soc_data, }, + /* legacy */ + { .compatible = "ti,omap3430", .data = &omap34xx_soc_data, }, + { .compatible = "ti,omap3630", .data = &omap36xx_soc_data, }, {}, }; -- cgit v1.2.3 From b7dbe349e1eb5a1c07b58da83d8ee60030682a3a Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Wed, 11 Sep 2019 19:47:08 +0200 Subject: ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 for With the driver installed, we can change the opp-v1 table format to opp-v2. In addition, move omap3 from whitelist to blacklist in cpufreq-dt-platdev in the same patch, because doing either first breaks operation and may make trouble in bisect. We also can remove opp-v1 table for omap3-n950-n9 since its 1GHz capability is now automatically detected. We also fix a wrong OPP4 voltage for omap3430 which must be 0.6V + 54*12.5mV = 1275mV. Otherwise the twl4030 driver will reject this OPP. Note: the high speed OPPs that were not available in the opp-v1 tables are tagged "turbo-mode;" which means they are not automatically activated by the govenors or cpu-freq. To enable you have to write echo 1 >/sys/devices/system/cpu/cpufreq/boost Note: to hard disable an OPP in a board.dts file use e.g. &cpu0_opp_table: { /delete-node/ opp1g-1000000000; /* do not use */ }; or alternatively: &cpu0_opp_table: { opp1g-1000000000 { status = "disabled"; /* do not use */ }; }; Signed-off-by: H. Nikolaus Schaller Acked-by: Tony Lindgren Tested-by: Adam Ford Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/omap3-n950-n9.dtsi | 7 ---- arch/arm/boot/dts/omap34xx.dtsi | 66 +++++++++++++++++++++++++++++++----- arch/arm/boot/dts/omap36xx.dtsi | 54 ++++++++++++++++++++++++----- drivers/cpufreq/cpufreq-dt-platdev.c | 2 +- 4 files changed, 104 insertions(+), 25 deletions(-) diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 6681d4519e97..a075b63f3087 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -11,13 +11,6 @@ cpus { cpu@0 { cpu0-supply = <&vcc>; - operating-points = < - /* kHz uV */ - 300000 1012500 - 600000 1200000 - 800000 1325000 - 1000000 1375000 - >; }; }; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 7b09cbee8bb8..c4dd9801840d 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -16,19 +16,67 @@ / { cpus { cpu: cpu@0 { - /* OMAP343x/OMAP35xx variants OPP1-5 */ - operating-points = < - /* kHz uV */ - 125000 975000 - 250000 1075000 - 500000 1200000 - 550000 1270000 - 600000 1350000 - >; + /* OMAP343x/OMAP35xx variants OPP1-6 */ + operating-points-v2 = <&cpu0_opp_table>; + clock-latency = <300000>; /* From legacy driver */ }; }; + /* see Documentation/devicetree/bindings/opp/opp.txt */ + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp1-125000000 { + opp-hz = /bits/ 64 <125000000>; + /* + * we currently only select the max voltage from table + * Table 3-3 of the omap3530 Data sheet (SPRS507F). + * Format is: + */ + opp-microvolt = <975000 975000 975000>; + /* + * first value is silicon revision bit mask + * second one 720MHz Device Identification bit mask + */ + opp-supported-hw = <0xffffffff 3>; + }; + + opp2-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1075000 1075000 1075000>; + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp3-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp4-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1275000 1275000 1275000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp5-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1350000 1350000 1350000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp6-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1350000 1350000 1350000>; + /* only high-speed grade omap3530 devices */ + opp-supported-hw = <0xffffffff 2>; + turbo-mode; + }; + }; + ocp@68000000 { omap3_pmx_core2: pinmux@480025d8 { compatible = "ti,omap3-padconf", "pinctrl-single"; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 1e552f08f120..2fcd0c5d72ba 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -19,15 +19,53 @@ }; cpus { - /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */ + /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */ cpu: cpu@0 { - operating-points = < - /* kHz uV */ - 300000 1012500 - 600000 1200000 - 800000 1325000 - >; - clock-latency = <300000>; /* From legacy driver */ + operating-points-v2 = <&cpu0_opp_table>; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; + + /* see Documentation/devicetree/bindings/opp/opp.txt */ + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + /* + * we currently only select the max voltage from table + * Table 4-19 of the DM3730 Data sheet (SPRS685B) + * Format is: + */ + opp-microvolt = <1012500 1012500 1012500>; + /* + * first value is silicon revision bit mask + * second one is "speed binned" bit mask + */ + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp130-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1325000 1325000 1325000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp1g-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1375000 1375000 1375000>; + /* only on am/dm37x with speed-binned bit set */ + opp-supported-hw = <0xffffffff 2>; + turbo-mode; }; }; diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index bca8d1f47fd2..54bc76743b1f 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -86,7 +86,6 @@ static const struct of_device_id whitelist[] __initconst = { { .compatible = "st-ericsson,u9540", }, { .compatible = "ti,omap2", }, - { .compatible = "ti,omap3", }, { .compatible = "ti,omap4", }, { .compatible = "ti,omap5", }, @@ -137,6 +136,7 @@ static const struct of_device_id blacklist[] __initconst = { { .compatible = "ti,am33xx", }, { .compatible = "ti,am43", }, { .compatible = "ti,dra7", }, + { .compatible = "ti,omap3", }, { } }; -- cgit v1.2.3 From b552904a73a3bb9a22b8b1db652a6f9285d535f3 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Wed, 11 Sep 2019 19:47:09 +0200 Subject: DTS: bindings: omap: update bindings documentation * clarify that we now need either "ti,omap3430" or "ti,omap3630" or "ti,am3517" for omap3 chips * clarify that "ti,omap3" has no default * clarify that AM33x is not an "ti,omap3" * clarify that the list of boards is incomplete * remove some "ti,am33xx", "ti,omap3" * add some missing "ti,omap4" Signed-off-by: H. Nikolaus Schaller Acked-by: Tony Lindgren Tested-by: Adam Ford Signed-off-by: Viresh Kumar --- .../devicetree/bindings/arm/omap/omap.txt | 30 ++++++++++++---------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index b301f753ed2c..e77635c5422c 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -43,7 +43,7 @@ SoC Families: - OMAP2 generic - defaults to OMAP2420 compatible = "ti,omap2" -- OMAP3 generic - defaults to OMAP3430 +- OMAP3 generic compatible = "ti,omap3" - OMAP4 generic - defaults to OMAP4430 compatible = "ti,omap4" @@ -51,6 +51,8 @@ SoC Families: compatible = "ti,omap5" - DRA7 generic - defaults to DRA742 compatible = "ti,dra7" +- AM33x generic + compatible = "ti,am33xx" - AM43x generic - defaults to AM4372 compatible = "ti,am43" @@ -63,12 +65,14 @@ SoCs: - OMAP3430 compatible = "ti,omap3430", "ti,omap3" + legacy: "ti,omap34xx" - please do not use any more - AM3517 compatible = "ti,am3517", "ti,omap3" - OMAP3630 - compatible = "ti,omap36xx", "ti,omap3" -- AM33xx - compatible = "ti,am33xx", "ti,omap3" + compatible = "ti,omap3630", "ti,omap3" + legacy: "ti,omap36xx" - please do not use any more +- AM335x + compatible = "ti,am33xx" - OMAP4430 compatible = "ti,omap4430", "ti,omap4" @@ -110,19 +114,19 @@ SoCs: - AM4372 compatible = "ti,am4372", "ti,am43" -Boards: +Boards (incomplete list of examples): - OMAP3 BeagleBoard : Low cost community board - compatible = "ti,omap3-beagle", "ti,omap3" + compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3" - OMAP3 Tobi with Overo : Commercial expansion board with daughter board - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3" + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3" - OMAP4 SDP : Software Development Board - compatible = "ti,omap4-sdp", "ti,omap4430" + compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4" - OMAP4 PandaBoard : Low cost community board - compatible = "ti,omap4-panda", "ti,omap4430" + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4" - OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; @@ -134,16 +138,16 @@ Boards: compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; - OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x - compatible = "ti,omap3-evm", "ti,omap3" + compatible = "ti,omap3-evm", "ti,omap3630", "ti,omap3" - AM335X EVM : Software Development Board for AM335x - compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3" + compatible = "ti,am335x-evm", "ti,am33xx" - AM335X Bone : Low cost community board - compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3" + compatible = "ti,am335x-bone", "ti,am33xx" - AM3359 ICEv2 : Low cost Industrial Communication Engine EVM. - compatible = "ti,am3359-icev2", "ti,am33xx", "ti,omap3" + compatible = "ti,am3359-icev2", "ti,am33xx" - AM335X OrionLXm : Substation Automation Platform compatible = "novatech,am335x-lxm", "ti,am33xx" -- cgit v1.2.3 From 6ddf6c91e6f884e55d3bb3dcf84ead5bfed273ce Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Wed, 11 Sep 2019 19:47:10 +0200 Subject: ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517 For the ti-cpufreq driver we need a clear separation between omap34 and omap36 families since they have different silicon revisions and efuses. So far ti,omap3630/ti,omap36xx is just an additional flag to ti,omap3 while omap34 has no required entry. Therefore we can not match omap34 boards properly. This needs to add ti,omap3430 and ti,omap3630 where it is missing. We also clean up some instances of missing ti,am3517 so that we can rely on seeing either one of: ti,am3517 ti,omap3430 ti,omap3630 in addition to ti,omap3. We leave ti,omap34xx and ti,omap36xx untouched for compatibility. The script to do the conversion is: manually fix am3517_mt_ventoux.dts find arch/arm/boot/dts -name '*.dts*' -exec fgrep -q '"ti,omap34xx"' {} \; ! -exec fgrep -q '"ti,omap3430"' {} \; -exec sed -i '' 's/"ti,omap34xx"/"ti,omap3430", "ti,omap34xx"/' {} \; find arch/arm/boot/dts -name '*.dts*' -exec fgrep -q '"ti,omap36xx"' {} \; ! -exec fgrep -q '"ti,omap3630"' {} \; -exec sed -i '' 's/"ti,omap36xx"/"ti,omap3630", "ti,omap36xx"/' {} \; find arch/arm/boot/dts \( -name 'omap*.dts*' -o -name 'logic*.dts*' \) -exec fgrep -q '"ti,omap3"' {} \; ! -exec fgrep -q '"ti,omap3630"' {} \; ! -exec fgrep -q '"ti,omap36xx"' {} \; ! -exec fgrep -q '"ti,am3517"' {} \; ! -exec fgrep -q '"ti,omap34xx"' {} \; ! -exec fgrep -q '"ti,omap3430"' {} \; -exec sed -i '' 's/"ti,omap3"/"ti,omap3430", "ti,omap3"/' {} \; So if your out-of-tree omap3 board does not show any OPPs, please check the compatibility entry and update if needed. Signed-off-by: H. Nikolaus Schaller Acked-by: Tony Lindgren Tested-by: Adam Ford Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +- arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts | 2 +- arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts | 2 +- arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +- arch/arm/boot/dts/omap3-beagle.dts | 2 +- arch/arm/boot/dts/omap3-cm-t3530.dts | 2 +- arch/arm/boot/dts/omap3-cm-t3730.dts | 2 +- arch/arm/boot/dts/omap3-devkit8000-lcd43.dts | 2 +- arch/arm/boot/dts/omap3-devkit8000-lcd70.dts | 2 +- arch/arm/boot/dts/omap3-devkit8000.dts | 2 +- arch/arm/boot/dts/omap3-gta04.dtsi | 2 +- arch/arm/boot/dts/omap3-ha-lcd.dts | 2 +- arch/arm/boot/dts/omap3-ha.dts | 2 +- arch/arm/boot/dts/omap3-igep0020-rev-f.dts | 2 +- arch/arm/boot/dts/omap3-igep0020.dts | 2 +- arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 2 +- arch/arm/boot/dts/omap3-igep0030.dts | 2 +- arch/arm/boot/dts/omap3-ldp.dts | 2 +- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- arch/arm/boot/dts/omap3-lilly-dbb056.dts | 2 +- arch/arm/boot/dts/omap3-n9.dts | 2 +- arch/arm/boot/dts/omap3-n950.dts | 2 +- arch/arm/boot/dts/omap3-overo-storm-alto35.dts | 2 +- arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts | 2 +- arch/arm/boot/dts/omap3-overo-storm-gallop43.dts | 2 +- arch/arm/boot/dts/omap3-overo-storm-palo35.dts | 2 +- arch/arm/boot/dts/omap3-overo-storm-palo43.dts | 2 +- arch/arm/boot/dts/omap3-overo-storm-summit.dts | 2 +- arch/arm/boot/dts/omap3-overo-storm-tobi.dts | 2 +- arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts | 2 +- arch/arm/boot/dts/omap3-pandora-1ghz.dts | 2 +- arch/arm/boot/dts/omap3-sbc-t3530.dts | 2 +- arch/arm/boot/dts/omap3-sbc-t3730.dts | 2 +- arch/arm/boot/dts/omap3-sniper.dts | 2 +- arch/arm/boot/dts/omap3-thunder.dts | 2 +- arch/arm/boot/dts/omap3-zoom3.dts | 2 +- arch/arm/boot/dts/omap3430-sdp.dts | 2 +- 37 files changed, 37 insertions(+), 37 deletions(-) diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index e507e4ae0d88..e7d7124a34ba 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -8,7 +8,7 @@ / { model = "TeeJet Mt.Ventoux"; - compatible = "teejet,mt_ventoux", "ti,omap3"; + compatible = "teejet,mt_ventoux", "ti,am3517", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index f7a841a28865..2a0a98fe67f0 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -9,5 +9,5 @@ / { model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; - compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3"; + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts index 7675bc3fa868..57bae2aa910e 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts @@ -9,5 +9,5 @@ / { model = "LogicPD Zoom OMAP35xx Torpedo Development Kit"; - compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1aa99fc1487a..125ed933ca75 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index e3df3c166902..4ed3f93f5841 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; + compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts index 76e52c78cbb4..32dbaeaed147 100644 --- a/arch/arm/boot/dts/omap3-cm-t3530.dts +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3530"; - compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; /* Regulator to trigger the reset signal of the Wifi module */ mmc2_sdio_reset: regulator-mmc2-sdio-reset { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 6e944dfa0f3d..683819bf0915 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3730"; - compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts index a80fc60bc773..afed85078ad8 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts @@ -11,7 +11,7 @@ #include "omap3-devkit8000-lcd-common.dtsi" / { model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; lcd0: display { panel-timing { diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts index 0753776071f8..07c51a105c0d 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts @@ -11,7 +11,7 @@ #include "omap3-devkit8000-lcd-common.dtsi" / { model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; lcd0: display { panel-timing { diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index faafc48d8f61..162d0726b008 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -7,7 +7,7 @@ #include "omap3-devkit8000-common.dtsi" / { model = "TimLL OMAP3 Devkit8000"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; aliases { display1 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index d01fc8744fd7..f65ecc2db29a 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -11,7 +11,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index badb9b3c8897..c9ecbc45c8e2 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM"; - compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts index a5365252bfbe..35c4e15abeb7 100644 --- a/arch/arm/boot/dts/omap3-ha.dts +++ b/arch/arm/boot/dts/omap3-ha.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM"; - compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 03dcd05fb8a0..d134ce1cffc0 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020-rev-f", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 6d0519e3dfd0..e341535a7162 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 060acd1e803a..9ca1d0f61964 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 25170bd3c573..32f31035daa2 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 9a5fde2d9bce..ec9ba04ef43b 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -10,7 +10,7 @@ / { model = "TI OMAP3430 LDP (Zoom1 Labrador)"; - compatible = "ti,omap3-ldp", "ti,omap3"; + compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c22833d4e568..73d477898ec2 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -7,7 +7,7 @@ / { model = "INCOstartec LILLY-A83X module (DM3730)"; - compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; chosen { bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index fec335400074..ecb4ef738e07 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -8,7 +8,7 @@ / { model = "INCOstartec LILLY-DBB056 (DM3730)"; - compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &twl { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 74c0ff2350d3..2495a696cec6 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -12,7 +12,7 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 9886bf8b90ab..31d47a1fad84 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -12,7 +12,7 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index 18338576c41d..7f04dfad8203 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35"; - compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index f204c8af8281..bc5a04e03336 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43"; - compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index c633f7cee68e..065c31cbf0e2 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43"; - compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index fb88ebc9858c..e38c1c51392c 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; - compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index 76cca00d97b6..e6dc23159c4d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43"; - compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index cc081a9e4c1e..587c08ce282d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit"; - compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index 1de41c0826e0..f57de6010994 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -14,6 +14,6 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index 9ed13118ed8e..281af6c113be 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; - compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index 81b957f33c9f..ea509956d7ac 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -16,7 +16,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "openpandora,omap3-pandora-1ghz", "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts index ae96002abb3b..24bf3fd86641 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3530.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3530 with CM-T3530"; - compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index 7de6df16fc17..eb3893b9535e 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; - compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index 40a87330e8c3..b6879cdc5c13 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -9,7 +9,7 @@ / { model = "LG Optimus Black"; - compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3"; + compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index 6276e7079b36..64221e3b3477 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 Thunder baseboard with TAO3530 SOM"; - compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index db3a2fe84e99..d240e39f2151 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -9,7 +9,7 @@ / { model = "TI Zoom3"; - compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 0abd61108a53..7bfde8aac7ae 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3430 SDP"; - compatible = "ti,omap3430-sdp", "ti,omap3"; + compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3"; memory@80000000 { device_type = "memory"; -- cgit v1.2.3 From 42e52616f382a455d64629b156685d5adc21ce85 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Wed, 11 Sep 2019 19:47:11 +0200 Subject: cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode In preparation for using the multi_regulator capability of this driver for handling the ABB LDO for OPP1G of the omap36xx we have to take care that the (legacy) vdd-supply name is cpu0-supply = <&vcc>; To do this we add another field to the SoC description table which optionally can specify a list of regulator names. For omap36xx we define "cpu0-supply" and "vbb-supply". The default remains "vdd-supply" and "vbb-supply". Signed-off-by: H. Nikolaus Schaller Acked-by: Tony Lindgren Acked-by: Rob Herring Tested-by: Adam Ford Signed-off-by: Viresh Kumar --- Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt | 6 +++++- drivers/cpufreq/ti-cpufreq.c | 12 ++++++++++-- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt index 0c38e4b8fc51..1758051798fe 100644 --- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -15,12 +15,16 @@ In 'cpus' nodes: In 'operating-points-v2' table: - compatible: Should be - - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx SoCs + - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx, + omap34xx, omap36xx and am3517 SoCs - syscon: A phandle pointing to a syscon node representing the control module register space of the SoC. Optional properties: -------------------- +- "vdd-supply", "vbb-supply": to define two regulators for dra7xx +- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx + For each opp entry in 'operating-points-v2' table: - opp-supported-hw: Two bitfields indicating: 1. Which revision of the SoC the OPP is supported by diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c index 13d426559333..a161098652e2 100644 --- a/drivers/cpufreq/ti-cpufreq.c +++ b/drivers/cpufreq/ti-cpufreq.c @@ -41,6 +41,7 @@ struct ti_cpufreq_data; struct ti_cpufreq_soc_data { + const char * const *reg_names; unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data, unsigned long efuse); unsigned long efuse_fallback; @@ -165,7 +166,10 @@ static struct ti_cpufreq_soc_data omap34xx_soc_data = { * seems to always read as 0). */ +static const char * const omap3_reg_names[] = {"cpu0", "vbb"}; + static struct ti_cpufreq_soc_data omap36xx_soc_data = { + .reg_names = omap3_reg_names, .efuse_xlate = omap3_efuse_xlate, .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE, .efuse_shift = 9, @@ -299,7 +303,7 @@ static int ti_cpufreq_probe(struct platform_device *pdev) const struct of_device_id *match; struct opp_table *ti_opp_table; struct ti_cpufreq_data *opp_data; - const char * const reg_names[] = {"vdd", "vbb"}; + const char * const default_reg_names[] = {"vdd", "vbb"}; int ret; match = dev_get_platdata(&pdev->dev); @@ -355,9 +359,13 @@ static int ti_cpufreq_probe(struct platform_device *pdev) opp_data->opp_table = ti_opp_table; if (opp_data->soc_data->multi_regulator) { + const char * const *reg_names = default_reg_names; + + if (opp_data->soc_data->reg_names) + reg_names = opp_data->soc_data->reg_names; ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev, reg_names, - ARRAY_SIZE(reg_names)); + ARRAY_SIZE(default_reg_names)); if (IS_ERR(ti_opp_table)) { dev_pm_opp_put_supported_hw(opp_data->opp_table); ret = PTR_ERR(ti_opp_table); -- cgit v1.2.3 From 341afbc9ea3983a2261c9e495e0b66b36b5dda20 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Wed, 11 Sep 2019 19:47:12 +0200 Subject: ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo See DM3730,DM275 data sheet (SPRS685B) footnote (6) in Table 4-19 which says that ABB must be switched to FBB mode when using the OPP1G. The LOD definition abb_mpu_iva already exists so that we need to add plumbing for vbb-supply = <&abb_mpu_iva> and define two voltage vectors for each OPP so that the abb LDO is also updated by the ti-cpufreq driver. We also must switch the ti_cpufreq_soc_data to multi_regulator. Note: reading out the abb reglator voltage to verify that it does do transitions can be done by cat /sys/devices/platform/68000000.ocp/483072f0.regulator-abb-mpu/regulator/regulator.*/microvolts Likewise, read the twl4030 provided VDD voltage by cat /sys/devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:regulator-vdd1/regulator/regulator.*/microvolts Note: to check if the ABB FBB is enabled/disabled, check registers PRM_LDO_ABB_CTRL 0x483072F4 bit 3:0 1=bypass 5=FBB PRM_LDO_ABB_SETUP 0x483072F0 0x00=bypass 0x11=FBB e.g. /dev/mem opened. Memory mapped at address 0xb6fe4000. Value at address 0x483072F4 (0xb6fe42f4): 0x3205 /dev/mem opened. Memory mapped at address 0xb6f89000. Value at address 0x483072F4 (0xb6f892f4): 0x3201 Note: omap34xx and am3517 have/need no comparable LDO or mechanism. Suggested-by: Adam Ford Signed-off-by: H. Nikolaus Schaller Acked-by: Tony Lindgren Tested-by: Adam Ford Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/omap36xx.dtsi | 21 ++++++++++++++++----- drivers/cpufreq/ti-cpufreq.c | 2 +- 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 2fcd0c5d72ba..c618cb257d00 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -23,6 +23,7 @@ cpu: cpu@0 { operating-points-v2 = <&cpu0_opp_table>; + vbb-supply = <&abb_mpu_iva>; clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; @@ -37,9 +38,11 @@ /* * we currently only select the max voltage from table * Table 4-19 of the DM3730 Data sheet (SPRS685B) - * Format is: + * Format is: cpu0-supply: + * vbb-supply: */ - opp-microvolt = <1012500 1012500 1012500>; + opp-microvolt = <1012500 1012500 1012500>, + <1012500 1012500 1012500>; /* * first value is silicon revision bit mask * second one is "speed binned" bit mask @@ -50,25 +53,33 @@ opp100-600000000 { opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1200000 1200000 1200000>; + opp-microvolt = <1200000 1200000 1200000>, + <1200000 1200000 1200000>; opp-supported-hw = <0xffffffff 3>; }; opp130-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1325000 1325000 1325000>; + opp-microvolt = <1325000 1325000 1325000>, + <1325000 1325000 1325000>; opp-supported-hw = <0xffffffff 3>; }; opp1g-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1375000 1375000 1375000>; + opp-microvolt = <1375000 1375000 1375000>, + <1375000 1375000 1375000>; /* only on am/dm37x with speed-binned bit set */ opp-supported-hw = <0xffffffff 2>; turbo-mode; }; }; + opp_supply_mpu_iva: opp_supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; + }; + ocp@68000000 { uart4: serial@49042000 { compatible = "ti,omap3-uart"; diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c index a161098652e2..c7e5d3d43118 100644 --- a/drivers/cpufreq/ti-cpufreq.c +++ b/drivers/cpufreq/ti-cpufreq.c @@ -175,7 +175,7 @@ static struct ti_cpufreq_soc_data omap36xx_soc_data = { .efuse_shift = 9, .efuse_mask = BIT(9), .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, - .multi_regulator = false, + .multi_regulator = true, }; /** -- cgit v1.2.3 From 3fbeef397212046cc514fe9fcd07e67e6ca32163 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 11 Sep 2019 19:47:13 +0200 Subject: cpufreq: ti-cpufreq: Add support for AM3517 The AM3517 only lists 600MHz @ 1.2V, but the register values for 0x4830A204 = 1b86 802f, it seems like am3517 might be a derivative of the omap36 which OPPs would be OPP50 (300 MHz) and OPP100 (600 MHz). This patch simply adds the am3517 to the compatible table similar to a mix of the omap3430 and omap3430 structure. Signed-off-by: Adam Ford Acked-by: Tony Lindgren Tested-by: Adam Ford Signed-off-by: H. Nikolaus Schaller Signed-off-by: Viresh Kumar --- drivers/cpufreq/ti-cpufreq.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c index c7e5d3d43118..557cb513bf7f 100644 --- a/drivers/cpufreq/ti-cpufreq.c +++ b/drivers/cpufreq/ti-cpufreq.c @@ -178,6 +178,21 @@ static struct ti_cpufreq_soc_data omap36xx_soc_data = { .multi_regulator = true, }; +/* + * AM3517 is quite similar to AM/DM37x except that it has no + * high speed grade eFuse and no abb ldo + */ + +static struct ti_cpufreq_soc_data am3517_soc_data = { + .efuse_xlate = omap3_efuse_xlate, + .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE, + .efuse_shift = 0, + .efuse_mask = 0, + .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, + .multi_regulator = false, +}; + + /** * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC * @opp_data: pointer to ti_cpufreq_data context @@ -275,6 +290,7 @@ static int ti_cpufreq_setup_syscon_register(struct ti_cpufreq_data *opp_data) static const struct of_device_id ti_cpufreq_of_match[] = { { .compatible = "ti,am33xx", .data = &am3x_soc_data, }, + { .compatible = "ti,am3517", .data = &am3517_soc_data, }, { .compatible = "ti,am43", .data = &am4x_soc_data, }, { .compatible = "ti,dra7", .data = &dra7_soc_data }, { .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, }, -- cgit v1.2.3 From 09865094536c759d84aa0b9ce9a27ffed1f2bd9e Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 11 Sep 2019 19:47:14 +0200 Subject: ARM: dts: Add OPP-V2 table for AM3517 The AM3517 only lists 600MHz @ 1.2V, but the register values for 0x4830A204 = 1b86 802f, it seems like am3517 might be a derivative of the omap36 which OPPs would be OPP50 (300 MHz) and OPP100 (600 MHz). This patch sets up the OPP50 and OPP100 tables at 300MHz and 600MHz for the AM3517 with each having an operating voltage at 1.2V. Signed-off-by: Adam Ford Acked-by: Tony Lindgren Tested-by: Adam Ford Signed-off-by: H. Nikolaus Schaller Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/am3517.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index bf3002009b00..76f819f4ba48 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -16,6 +16,37 @@ can = &hecc; }; + cpus { + cpu: cpu@0 { + /* Based on OMAP3630 variants OPP50 and OPP100 */ + operating-points-v2 = <&cpu0_opp_table>; + + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + /* + * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx + * appear to operate at 300MHz as well. Since AM3517 only + * lists one operating voltage, it will remain fixed at 1.2V + */ + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + }; + }; + ocp@68000000 { am35x_otg_hs: am35x_otg_hs@5c040000 { compatible = "ti,omap3-musb"; -- cgit v1.2.3 From 1b82a4b5d331ba3814a53f2fc289c2d2716bd3fd Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Fri, 18 Oct 2019 11:37:45 +0100 Subject: cpufreq: scpi: remove stale/outdated comment about the driver Commit 343a8d17fa8d ("cpufreq: scpi: remove arm_big_little dependency") removed the arm_big_little dependency from scpi driver and doesn't provide any ops to arm_big_little cpufreq driver. Lets remove that stale comment. Acked-by: Nicolas Pitre Signed-off-by: Sudeep Holla Signed-off-by: Viresh Kumar --- drivers/cpufreq/scpi-cpufreq.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c index 2b51e0718c9f..20d1f85d5f5a 100644 --- a/drivers/cpufreq/scpi-cpufreq.c +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -1,8 +1,6 @@ /* * System Control and Power Interface (SCPI) based CPUFreq Interface driver * - * It provides necessary ops to arm_big_little cpufreq driver. - * * Copyright (C) 2015 ARM Ltd. * Sudeep Holla * -- cgit v1.2.3 From a0f950d3a0addc9552233aa2ffbdc086aa02106a Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 21 Oct 2019 11:20:34 +0100 Subject: cpufreq: merge arm_big_little and vexpress-spc arm_big_little cpufreq driver was designed as a generic big little driver that could be used by any platform and make use of bL switcher. Over years alternate solutions have been designed and merged to deal with bL/HMP systems like EAS. Also since no other driver made use of generic arm_big_little cpufreq driver except Vexpress SPC, we can merge them together as vexpress-spc driver used only on Vexpress TC2(CA15_CA7) platform. Acked-by: Nicolas Pitre Signed-off-by: Sudeep Holla Signed-off-by: Viresh Kumar --- MAINTAINERS | 5 +- drivers/cpufreq/Kconfig.arm | 12 +- drivers/cpufreq/Makefile | 2 - drivers/cpufreq/arm_big_little.c | 658 -------------------------------- drivers/cpufreq/arm_big_little.h | 43 --- drivers/cpufreq/vexpress-spc-cpufreq.c | 660 ++++++++++++++++++++++++++++++++- 6 files changed, 651 insertions(+), 729 deletions(-) delete mode 100644 drivers/cpufreq/arm_big_little.c delete mode 100644 drivers/cpufreq/arm_big_little.h diff --git a/MAINTAINERS b/MAINTAINERS index 296de2b51c83..07f5d8dc3027 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4273,14 +4273,13 @@ F: include/linux/cpufreq.h F: include/linux/sched/cpufreq.h F: tools/testing/selftests/cpufreq/ -CPU FREQUENCY DRIVERS - ARM BIG LITTLE +CPU FREQUENCY DRIVERS - VEXPRESS SPC ARM BIG LITTLE M: Viresh Kumar M: Sudeep Holla L: linux-pm@vger.kernel.org W: http://www.arm.com/products/processors/technologies/biglittleprocessing.php S: Maintained -F: drivers/cpufreq/arm_big_little.h -F: drivers/cpufreq/arm_big_little.c +F: drivers/cpufreq/vexpress-spc-cpufreq.c CPU POWER MONITORING SUBSYSTEM M: Thomas Renninger diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index a905796f7f85..3858d86cf409 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -49,14 +49,6 @@ config ARM_ARMADA_8K_CPUFREQ If in doubt, say N. -# big LITTLE core layer and glue drivers -config ARM_BIG_LITTLE_CPUFREQ - tristate "Generic ARM big LITTLE CPUfreq driver" - depends on ARM_CPU_TOPOLOGY && HAVE_CLK - select PM_OPP - help - This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. - config ARM_SCPI_CPUFREQ tristate "SCPI based CPUfreq driver" depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI @@ -69,7 +61,9 @@ config ARM_SCPI_CPUFREQ config ARM_VEXPRESS_SPC_CPUFREQ tristate "Versatile Express SPC based CPUfreq driver" - depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC + depends on ARM_CPU_TOPOLOGY && HAVE_CLK + depends on ARCH_VEXPRESS_SPC + select PM_OPP help This add the CPUfreq driver support for Versatile Express big.LITTLE platforms using SPC for power management. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 9a9f5ccd13d9..f6670c4abbb0 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -47,8 +47,6 @@ obj-$(CONFIG_X86_SFI_CPUFREQ) += sfi-cpufreq.o ################################################################################## # ARM SoC drivers -obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o - obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o obj-$(CONFIG_ARM_ARMADA_8K_CPUFREQ) += armada-8k-cpufreq.o obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c deleted file mode 100644 index 7fe52fcddcf1..000000000000 --- a/drivers/cpufreq/arm_big_little.c +++ /dev/null @@ -1,658 +0,0 @@ -/* - * ARM big.LITTLE Platforms CPUFreq support - * - * Copyright (C) 2013 ARM Ltd. - * Sudeep KarkadaNagesha - * - * Copyright (C) 2013 Linaro. - * Viresh Kumar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "arm_big_little.h" - -/* Currently we support only two clusters */ -#define A15_CLUSTER 0 -#define A7_CLUSTER 1 -#define MAX_CLUSTERS 2 - -#ifdef CONFIG_BL_SWITCHER -#include -static bool bL_switching_enabled; -#define is_bL_switching_enabled() bL_switching_enabled -#define set_switching_enabled(x) (bL_switching_enabled = (x)) -#else -#define is_bL_switching_enabled() false -#define set_switching_enabled(x) do { } while (0) -#define bL_switch_request(...) do { } while (0) -#define bL_switcher_put_enabled() do { } while (0) -#define bL_switcher_get_enabled() do { } while (0) -#endif - -#define ACTUAL_FREQ(cluster, freq) ((cluster == A7_CLUSTER) ? freq << 1 : freq) -#define VIRT_FREQ(cluster, freq) ((cluster == A7_CLUSTER) ? freq >> 1 : freq) - -static struct thermal_cooling_device *cdev[MAX_CLUSTERS]; -static const struct cpufreq_arm_bL_ops *arm_bL_ops; -static struct clk *clk[MAX_CLUSTERS]; -static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1]; -static atomic_t cluster_usage[MAX_CLUSTERS + 1]; - -static unsigned int clk_big_min; /* (Big) clock frequencies */ -static unsigned int clk_little_max; /* Maximum clock frequency (Little) */ - -static DEFINE_PER_CPU(unsigned int, physical_cluster); -static DEFINE_PER_CPU(unsigned int, cpu_last_req_freq); - -static struct mutex cluster_lock[MAX_CLUSTERS]; - -static inline int raw_cpu_to_cluster(int cpu) -{ - return topology_physical_package_id(cpu); -} - -static inline int cpu_to_cluster(int cpu) -{ - return is_bL_switching_enabled() ? - MAX_CLUSTERS : raw_cpu_to_cluster(cpu); -} - -static unsigned int find_cluster_maxfreq(int cluster) -{ - int j; - u32 max_freq = 0, cpu_freq; - - for_each_online_cpu(j) { - cpu_freq = per_cpu(cpu_last_req_freq, j); - - if ((cluster == per_cpu(physical_cluster, j)) && - (max_freq < cpu_freq)) - max_freq = cpu_freq; - } - - pr_debug("%s: cluster: %d, max freq: %d\n", __func__, cluster, - max_freq); - - return max_freq; -} - -static unsigned int clk_get_cpu_rate(unsigned int cpu) -{ - u32 cur_cluster = per_cpu(physical_cluster, cpu); - u32 rate = clk_get_rate(clk[cur_cluster]) / 1000; - - /* For switcher we use virtual A7 clock rates */ - if (is_bL_switching_enabled()) - rate = VIRT_FREQ(cur_cluster, rate); - - pr_debug("%s: cpu: %d, cluster: %d, freq: %u\n", __func__, cpu, - cur_cluster, rate); - - return rate; -} - -static unsigned int bL_cpufreq_get_rate(unsigned int cpu) -{ - if (is_bL_switching_enabled()) { - pr_debug("%s: freq: %d\n", __func__, per_cpu(cpu_last_req_freq, - cpu)); - - return per_cpu(cpu_last_req_freq, cpu); - } else { - return clk_get_cpu_rate(cpu); - } -} - -static unsigned int -bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate) -{ - u32 new_rate, prev_rate; - int ret; - bool bLs = is_bL_switching_enabled(); - - mutex_lock(&cluster_lock[new_cluster]); - - if (bLs) { - prev_rate = per_cpu(cpu_last_req_freq, cpu); - per_cpu(cpu_last_req_freq, cpu) = rate; - per_cpu(physical_cluster, cpu) = new_cluster; - - new_rate = find_cluster_maxfreq(new_cluster); - new_rate = ACTUAL_FREQ(new_cluster, new_rate); - } else { - new_rate = rate; - } - - pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n", - __func__, cpu, old_cluster, new_cluster, new_rate); - - ret = clk_set_rate(clk[new_cluster], new_rate * 1000); - if (!ret) { - /* - * FIXME: clk_set_rate hasn't returned an error here however it - * may be that clk_change_rate failed due to hardware or - * firmware issues and wasn't able to report that due to the - * current design of the clk core layer. To work around this - * problem we will read back the clock rate and check it is - * correct. This needs to be removed once clk core is fixed. - */ - if (clk_get_rate(clk[new_cluster]) != new_rate * 1000) - ret = -EIO; - } - - if (WARN_ON(ret)) { - pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret, - new_cluster); - if (bLs) { - per_cpu(cpu_last_req_freq, cpu) = prev_rate; - per_cpu(physical_cluster, cpu) = old_cluster; - } - - mutex_unlock(&cluster_lock[new_cluster]); - - return ret; - } - - mutex_unlock(&cluster_lock[new_cluster]); - - /* Recalc freq for old cluster when switching clusters */ - if (old_cluster != new_cluster) { - pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n", - __func__, cpu, old_cluster, new_cluster); - - /* Switch cluster */ - bL_switch_request(cpu, new_cluster); - - mutex_lock(&cluster_lock[old_cluster]); - - /* Set freq of old cluster if there are cpus left on it */ - new_rate = find_cluster_maxfreq(old_cluster); - new_rate = ACTUAL_FREQ(old_cluster, new_rate); - - if (new_rate) { - pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n", - __func__, old_cluster, new_rate); - - if (clk_set_rate(clk[old_cluster], new_rate * 1000)) - pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n", - __func__, ret, old_cluster); - } - mutex_unlock(&cluster_lock[old_cluster]); - } - - return 0; -} - -/* Set clock frequency */ -static int bL_cpufreq_set_target(struct cpufreq_policy *policy, - unsigned int index) -{ - u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster; - unsigned int freqs_new; - int ret; - - cur_cluster = cpu_to_cluster(cpu); - new_cluster = actual_cluster = per_cpu(physical_cluster, cpu); - - freqs_new = freq_table[cur_cluster][index].frequency; - - if (is_bL_switching_enabled()) { - if ((actual_cluster == A15_CLUSTER) && - (freqs_new < clk_big_min)) { - new_cluster = A7_CLUSTER; - } else if ((actual_cluster == A7_CLUSTER) && - (freqs_new > clk_little_max)) { - new_cluster = A15_CLUSTER; - } - } - - ret = bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new); - - if (!ret) { - arch_set_freq_scale(policy->related_cpus, freqs_new, - policy->cpuinfo.max_freq); - } - - return ret; -} - -static inline u32 get_table_count(struct cpufreq_frequency_table *table) -{ - int count; - - for (count = 0; table[count].frequency != CPUFREQ_TABLE_END; count++) - ; - - return count; -} - -/* get the minimum frequency in the cpufreq_frequency_table */ -static inline u32 get_table_min(struct cpufreq_frequency_table *table) -{ - struct cpufreq_frequency_table *pos; - uint32_t min_freq = ~0; - cpufreq_for_each_entry(pos, table) - if (pos->frequency < min_freq) - min_freq = pos->frequency; - return min_freq; -} - -/* get the maximum frequency in the cpufreq_frequency_table */ -static inline u32 get_table_max(struct cpufreq_frequency_table *table) -{ - struct cpufreq_frequency_table *pos; - uint32_t max_freq = 0; - cpufreq_for_each_entry(pos, table) - if (pos->frequency > max_freq) - max_freq = pos->frequency; - return max_freq; -} - -static int merge_cluster_tables(void) -{ - int i, j, k = 0, count = 1; - struct cpufreq_frequency_table *table; - - for (i = 0; i < MAX_CLUSTERS; i++) - count += get_table_count(freq_table[i]); - - table = kcalloc(count, sizeof(*table), GFP_KERNEL); - if (!table) - return -ENOMEM; - - freq_table[MAX_CLUSTERS