From d64b472678e17ef9afb251577f4f544793483fa9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:58:59 +0200 Subject: spi: rspi: Remove unneeded semicolon Introduced by commit 426ef76dd8a394a0e04d096941cd9acb49539a3e ("spi: rspi: Add DT support"). Reported-by: kbuild test robot Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index ad87a98f8f68..a4d8d3cf2912 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -1084,7 +1084,7 @@ static int rspi_probe(struct platform_device *pdev) master->num_chipselect = rspi_pd->num_chipselect; else master->num_chipselect = 2; /* default */ - }; + } /* ops parameter check */ if (!ops->set_config_register) { -- cgit v1.2.3 From 43937455c9bf294cffc2f25c4a4d0a1b9bbd88e6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:59:00 +0200 Subject: spi: rspi: Use devm_kasprintf() Use the devm_kasprintf() helper function instead of open coding error-prone buffer handling and string formatting. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index a4d8d3cf2912..aa1c6a893570 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -1046,12 +1046,11 @@ static int rspi_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler, const char *suffix, void *dev_id) { - const char *base = dev_name(dev); - size_t len = strlen(base) + strlen(suffix) + 2; - char *name = devm_kzalloc(dev, len, GFP_KERNEL); + const char *name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s", + dev_name(dev), suffix); if (!name) return -ENOMEM; - snprintf(name, len, "%s:%s", base, suffix); + return devm_request_irq(dev, irq, handler, 0, name, dev_id); } -- cgit v1.2.3 From a30b95a7d81cfc3442beb5a9635f22b19c97bbfc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:59:01 +0200 Subject: spi: rspi: Configure DMA slave bus width to 8 bit The new Renesas R-Car Gen2 DMA Controller driver (rcar-dmac) requires explicit configuration of the DMA slave bus width. Hardcode the DMA transfer size to 1 byte for both directions, as that's the only supported configuration (16-bit DMA support was removed in commit 9c5de2c1754c2bb3c69c4d7bf0d0edc0a61d8232 ("spi: rspi: Remove unused 16-bit DMA support")). Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index aa1c6a893570..6a4eb2d7f644 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -919,10 +919,13 @@ static struct dma_chan *rspi_request_dma_chan(struct device *dev, memset(&cfg, 0, sizeof(cfg)); cfg.slave_id = id; cfg.direction = dir; - if (dir == DMA_MEM_TO_DEV) + if (dir == DMA_MEM_TO_DEV) { cfg.dst_addr = port_addr; - else + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } else { cfg.src_addr = port_addr; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } ret = dmaengine_slave_config(chan, &cfg); if (ret) { -- cgit v1.2.3 From e825b8dd2b363e9134006fb141825518a11b2bf4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:59:02 +0200 Subject: spi: rspi: Add DT support to DMA setup Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/spi-rspi.txt | 5 +++ drivers/spi/spi-rspi.c | 37 ++++++++++++++-------- 2 files changed, 28 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt index d57d82a74054..f9929aceeacc 100644 --- a/Documentation/devicetree/bindings/spi/spi-rspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt @@ -30,6 +30,9 @@ Required properties: Optional properties: - clocks : Must contain a reference to the functional clock. +- dmas : Must contain a list of two references to DMA specifiers, + one for transmission, and one for reception. +- dma-names : Must contain a list of two DMA names, "tx" and "rx". Pinctrl properties might be needed, too. See Documentation/devicetree/bindings/pinctrl/renesas,*. @@ -58,4 +61,6 @@ Examples: num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; }; diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 6a4eb2d7f644..1da609e4491d 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -909,10 +909,11 @@ static struct dma_chan *rspi_request_dma_chan(struct device *dev, dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - chan = dma_request_channel(mask, shdma_chan_filter, - (void *)(unsigned long)id); + chan = dma_request_slave_channel_compat(mask, shdma_chan_filter, + (void *)(unsigned long)id, dev, + dir == DMA_MEM_TO_DEV ? "tx" : "rx"); if (!chan) { - dev_warn(dev, "dma_request_channel failed\n"); + dev_warn(dev, "dma_request_slave_channel_compat failed\n"); return NULL; } @@ -941,22 +942,30 @@ static int rspi_request_dma(struct device *dev, struct spi_master *master, const struct resource *res) { const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev); + unsigned int dma_tx_id, dma_rx_id; + + if (dev->of_node) { + /* In the OF case we will get the slave IDs from the DT */ + dma_tx_id = 0; + dma_rx_id = 0; + } else if (rspi_pd && rspi_pd->dma_tx_id && rspi_pd->dma_rx_id) { + dma_tx_id = rspi_pd->dma_tx_id; + dma_rx_id = rspi_pd->dma_rx_id; + } else { + /* The driver assumes no error. */ + return 0; + } - if (!rspi_pd || !rspi_pd->dma_rx_id || !rspi_pd->dma_tx_id) - return 0; /* The driver assumes no error. */ - - master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, - rspi_pd->dma_rx_id, + master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id, res->start + RSPI_SPDR); - if (!master->dma_rx) + if (!master->dma_tx) return -ENODEV; - master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, - rspi_pd->dma_tx_id, + master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id, res->start + RSPI_SPDR); - if (!master->dma_tx) { - dma_release_channel(master->dma_rx); - master->dma_rx = NULL; + if (!master->dma_rx) { + dma_release_channel(master->dma_tx); + master->dma_tx = NULL; return -ENODEV; } -- cgit v1.2.3 From 52fba2b85d30075490db023642632032371505c2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:59:04 +0200 Subject: spi: sh-msiof: Configure DMA slave bus width The new Renesas R-Car Gen2 DMA Controller driver (rcar-dmac) requires explicit configuration of the DMA slave bus width. Hardcode the DMA transfer size to 4 bytes, as MSIOF DMA is limited to 32-bit words. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 887c2084130f..b19cbb4cb4a0 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -987,10 +987,13 @@ static struct dma_chan *sh_msiof_request_dma_chan(struct device *dev, memset(&cfg, 0, sizeof(cfg)); cfg.slave_id = id; cfg.direction = dir; - if (dir == DMA_MEM_TO_DEV) + if (dir == DMA_MEM_TO_DEV) { cfg.dst_addr = port_addr; - else + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + } else { cfg.src_addr = port_addr; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + } ret = dmaengine_slave_config(chan, &cfg); if (ret) { -- cgit v1.2.3 From a6be4de6a24cbef6209e3a0fcddaee9e312a1f63 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:59:05 +0200 Subject: spi: sh-msiof: Add DT support to DMA setup Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/sh-msiof.txt | 17 ++++++++++++--- drivers/spi/spi-sh-msiof.c | 25 ++++++++++++++++------ 2 files changed, 32 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index f24baf3b6cc1..98e07f1c3dab 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -6,8 +6,13 @@ Required properties: "renesas,sh-mobile-msiof" for SH Mobile series. Examples with soctypes are: "renesas,msiof-r8a7790" (R-Car H2) - "renesas,msiof-r8a7791" (R-Car M2) -- reg : Offset and length of the register set for the device +- reg : A list of offsets and lengths of the register sets for + the device. + If only one register set is present, it is to be used + by both the CPU and the DMA engine. + If two register sets are present, the first is to be + used by the CPU, and the second is to be used by the + DMA engine. - interrupt-parent : The phandle for the interrupt controller that services interrupts for this device - interrupts : Interrupt specifier @@ -17,6 +22,10 @@ Required properties: Optional properties: - clocks : Must contain a reference to the functional clock. - num-cs : Total number of chip-selects (default is 1) +- dmas : Must contain a list of two references to DMA + specifiers, one for transmission, and one for + reception. +- dma-names : Must contain a list of two DMA names, "tx" and "rx". Optional properties, deprecated for soctype-specific bindings: - renesas,tx-fifo-size : Overrides the default tx fifo size given in words @@ -31,9 +40,11 @@ Example: msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index b19cbb4cb4a0..811a42dba92a 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -977,10 +977,11 @@ static struct dma_chan *sh_msiof_request_dma_chan(struct device *dev, dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - chan = dma_request_channel(mask, shdma_chan_filter, - (void *)(unsigned long)id); + chan = dma_request_slave_channel_compat(mask, shdma_chan_filter, + (void *)(unsigned long)id, dev, + dir == DMA_MEM_TO_DEV ? "tx" : "rx"); if (!chan) { - dev_warn(dev, "dma_request_channel failed\n"); + dev_warn(dev, "dma_request_slave_channel_compat failed\n"); return NULL; } @@ -1010,12 +1011,22 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p) struct platform_device *pdev = p->pdev; struct device *dev = &pdev->dev; const struct sh_msiof_spi_info *info = dev_get_platdata(dev); + unsigned int dma_tx_id, dma_rx_id; const struct resource *res; struct spi_master *master; struct device *tx_dev, *rx_dev; - if (!info || !info->dma_tx_id || !info->dma_rx_id) - return 0; /* The driver assumes no error */ + if (dev->of_node) { + /* In the OF case we will get the slave IDs from the DT */ + dma_tx_id = 0; + dma_rx_id = 0; + } else if (info && info->dma_tx_id && info->dma_rx_id) { + dma_tx_id = info->dma_tx_id; + dma_rx_id = info->dma_rx_id; + } else { + /* The driver assumes no error */ + return 0; + } /* The DMA engine uses the second register set, if present */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); @@ -1024,13 +1035,13 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p) master = p->master; master->dma_tx = sh_msiof_request_dma_chan(dev, DMA_MEM_TO_DEV, - info->dma_tx_id, + dma_tx_id, res->start + TFDR); if (!master->dma_tx) return -ENODEV; master->dma_rx = sh_msiof_request_dma_chan(dev, DMA_DEV_TO_MEM, - info->dma_rx_id, + dma_rx_id, res->start + RFDR); if (!master->dma_rx) goto free_tx_chan; -- cgit v1.2.3 From a5e7c719fe257214aeda3dadb502a4cf58209a61 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 7 Aug 2014 14:07:42 +0200 Subject: spi: sh-msiof: Return early in sh_msiof_dma_once() where possible Reported-by: Laurent Pinchart Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 811a42dba92a..daaa868e959f 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -642,18 +642,14 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx, desc_rx = dmaengine_prep_slave_single(p->master->dma_rx, p->rx_dma_addr, len, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc_rx) { - ret = -EAGAIN; - goto no_dma_rx; - } + if (!desc_rx) + return -EAGAIN; desc_rx->callback = sh_msiof_dma_complete; desc_rx->callback_param = p; cookie = dmaengine_submit(desc_rx); - if (dma_submit_error(cookie)) { - ret = cookie; - goto no_dma_rx; - } + if (dma_submit_error(cookie)) + return cookie; } if (tx) { @@ -738,7 +734,6 @@ no_dma_tx: if (rx) dmaengine_terminate_all(p->master->dma_rx); sh_msiof_write(p, IER, 0); -no_dma_rx: return ret; } -- cgit v1.2.3 From 7a9f957b395fc08edc47620c01e8bb5b798caddb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 7 Aug 2014 14:07:43 +0200 Subject: spi: sh-msiof: Fix transmit-only DMA transfers Fix tx/rx mixup, which broke transmit-only transfers. Introduced by commit 4240305f7cbdc7782aa8bc40cc702775d9ac0839 ("spi: sh-msiof: Fix leaking of unused DMA descriptors"). Reported-by: Laurent Pinchart Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index daaa868e959f..1165d418340f 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -689,9 +689,9 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx, reinit_completion(&p->done); /* Now start DMA */ - if (tx) - dma_async_issue_pending(p->master->dma_rx); if (rx) + dma_async_issue_pending(p->master->dma_rx); + if (tx) dma_async_issue_pending(p->master->dma_tx); ret = sh_msiof_spi_start(p, rx); -- cgit v1.2.3 From afa93c9017fd48d4d5265854c75f5fcde0871548 Mon Sep 17 00:00:00 2001 From: "Chew, Chiau Ee" Date: Fri, 25 Jul 2014 01:10:54 +0800 Subject: spi/pxa2xx-pci: Add common clock framework support in PCI glue layer SPI PXA2XX core layer has dependency on common clock framework to obtain information on host supported clock rate. Thus, we setup the clock device in the PCI glue layer to enable PCI mode host pass in the clock rate information. Signed-off-by: Chew, Chiau Ee Acked-by: Kweh, Hock Leong Acked-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 2 +- drivers/spi/spi-pxa2xx-pci.c | 21 ++++++++++++++++++++- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 62e2242ad7e0..aa005cbf2e50 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -380,7 +380,7 @@ config SPI_PXA2XX additional documentation can be found a Documentation/spi/pxa2xx. config SPI_PXA2XX_PCI - def_tristate SPI_PXA2XX && PCI + def_tristate SPI_PXA2XX && PCI && COMMON_CLK config SPI_ROCKCHIP tristate "Rockchip SPI controller driver" diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index c1865c92ccb9..20ebbc764693 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -7,6 +7,8 @@ #include #include #include +#include +#include enum { PORT_CE4100, @@ -21,6 +23,7 @@ struct pxa_spi_info { int tx_chan_id; int rx_slave_id; int rx_chan_id; + unsigned long max_clk_rate; }; static struct pxa_spi_info spi_info_configs[] = { @@ -32,6 +35,7 @@ static struct pxa_spi_info spi_info_configs[] = { .tx_chan_id = -1, .rx_slave_id = -1, .rx_chan_id = -1, + .max_clk_rate = 3686400, }, [PORT_BYT] = { .type = LPSS_SSP, @@ -41,6 +45,7 @@ static struct pxa_spi_info spi_info_configs[] = { .tx_chan_id = 0, .rx_slave_id = 1, .rx_chan_id = 1, + .max_clk_rate = 50000000, }, }; @@ -53,6 +58,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, struct pxa2xx_spi_master spi_pdata; struct ssp_device *ssp; struct pxa_spi_info *c; + char buf[40]; ret = pcim_enable_device(dev); if (ret) @@ -84,6 +90,12 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn; ssp->type = c->type; + snprintf(buf, sizeof(buf), "pxa2xx-spi.%d", ssp->port_id); + ssp->clk = clk_register_fixed_rate(&dev->dev, buf , NULL, + CLK_IS_ROOT, c->max_clk_rate); + if (IS_ERR(ssp->clk)) + return PTR_ERR(ssp->clk); + memset(&pi, 0, sizeof(pi)); pi.parent = &dev->dev; pi.name = "pxa2xx-spi"; @@ -92,8 +104,10 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, pi.size_data = sizeof(spi_pdata); pdev = platform_device_register_full(&pi); - if (IS_ERR(pdev)) + if (IS_ERR(pdev)) { + clk_unregister(ssp->clk); return PTR_ERR(pdev); + } pci_set_drvdata(dev, pdev); @@ -103,8 +117,13 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, static void pxa2xx_spi_pci_remove(struct pci_dev *dev) { struct platform_device *pdev = pci_get_drvdata(dev); + struct pxa2xx_spi_master *spi_pdata; + + spi_pdata = dev_get_platdata(&pdev->dev); platform_device_unregister(pdev); + clk_unregister(spi_pdata->ssp.clk); + pci_set_drvdata(dev, NULL); } static const struct pci_device_id pxa2xx_spi_pci_devices[] = { -- cgit v1.2.3 From 468e0f47ed87350408ddac0e942fbf9a723408f9 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 19 Aug 2014 20:29:20 +0300 Subject: spi/pxa2xx-pci: remove unnecessary assignment There is no need to unset driver data pointer at removal stage. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx-pci.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 20ebbc764693..536c863bebf1 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -123,7 +123,6 @@ static void pxa2xx_spi_pci_remove(struct pci_dev *dev) platform_device_unregister(pdev); clk_unregister(spi_pdata->ssp.clk); - pci_set_drvdata(dev, NULL); } static const struct pci_device_id pxa2xx_spi_pci_devices[] = { -- cgit v1.2.3 From 6089af775a4b4ea5237648de650dda548cb841c2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 28 Aug 2014 10:10:19 +0200 Subject: spi: rspi: Add support for new R-Car Gen2 SoCs Add support for QSPI in: - r8a7792 (R-Car V2H) - r8a7793 (R-Car M2-N) - r8a7794 (R-Car E2) r8a7791 is now called "R-Car M2-W". Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/spi-rspi.txt | 5 ++++- drivers/spi/spi-rspi.c | 2 +- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt index f9929aceeacc..8f4169f63936 100644 --- a/Documentation/devicetree/bindings/spi/spi-rspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt @@ -11,7 +11,10 @@ Required properties: - "renesas,rspi-sh7757" (SH) - "renesas,rspi-r7s72100" (RZ/A1H) - "renesas,qspi-r8a7790" (R-Car H2) - - "renesas,qspi-r8a7791" (R-Car M2) + - "renesas,qspi-r8a7791" (R-Car M2-W) + - "renesas,qspi-r8a7792" (R-Car V2H) + - "renesas,qspi-r8a7793" (R-Car M2-N) + - "renesas,qspi-r8a7794" (R-Car E2) - reg : Address start and address range size of the device - interrupts : A list of interrupt-specifiers, one for each entry in interrupt-names. diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 1da609e4491d..54bb0faec155 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -87,7 +87,7 @@ /* RSPI on SH only */ #define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */ #define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */ -/* QSPI on R-Car M2 only */ +/* QSPI on R-Car Gen2 only */ #define SPCR_WSWAP 0x02 /* Word Swap of read-data for DMAC */ #define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */ -- cgit v1.2.3 From e221cc99bee4494a99aa8d8525cd7776092ced05 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 28 Aug 2014 10:11:03 +0200 Subject: spi: sh-msiof: Add support for new R-Car Gen2 SoCs Add support for MSIOF in: - r8a7792 (R-Car V2H) - r8a7793 (R-Car M2-N) - r8a7794 (R-Car E2) r8a7791 is now called "R-Car M2-W". Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/sh-msiof.txt | 6 +++++- drivers/spi/spi-sh-msiof.c | 6 ++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 98e07f1c3dab..d11c3721e7cd 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -6,6 +6,10 @@ Required properties: "renesas,sh-mobile-msiof" for SH Mobile series. Examples with soctypes are: "renesas,msiof-r8a7790" (R-Car H2) + "renesas,msiof-r8a7791" (R-Car M2-W) + "renesas,msiof-r8a7792" (R-Car V2H) + "renesas,msiof-r8a7793" (R-Car M2-N) + "renesas,msiof-r8a7794" (R-Car E2) - reg : A list of offsets and lengths of the register sets for the device. If only one register set is present, it is to be used @@ -31,7 +35,7 @@ Optional properties, deprecated for soctype-specific bindings: - renesas,tx-fifo-size : Overrides the default tx fifo size given in words (default is 64) - renesas,rx-fifo-size : Overrides the default rx fifo size given in words - (default is 64, or 256 on R-Car H2 and M2) + (default is 64, or 256 on R-Car Gen2) Pinctrl properties might be needed, too. See Documentation/devicetree/bindings/pinctrl/renesas,*. diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 1165d418340f..3f365402fcc0 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -928,6 +928,9 @@ static const struct of_device_id sh_msiof_match[] = { { .compatible = "renesas,sh-mobile-msiof", .data = &sh_data }, { .compatible = "renesas,msiof-r8a7790", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7791", .data = &r8a779x_data }, + { .compatible = "renesas,msiof-r8a7792", .data = &r8a779x_data }, + { .compatible = "renesas,msiof-r8a7793", .data = &r8a779x_data }, + { .compatible = "renesas,msiof-r8a7794", .data = &r8a779x_data }, {}, }; MODULE_DEVICE_TABLE(of, sh_msiof_match); @@ -1219,6 +1222,9 @@ static struct platform_device_id spi_driver_ids[] = { { "spi_sh_msiof", (kernel_ulong_t)&sh_data }, { "spi_r8a7790_msiof", (kernel_ulong_t)&r8a779x_data }, { "spi_r8a7791_msiof", (kernel_ulong_t)&r8a779x_data }, + { "spi_r8a7792_msiof", (kernel_ulong_t)&r8a779x_data }, + { "spi_r8a7793_msiof", (kernel_ulong_t)&r8a779x_data }, + { "spi_r8a7794_msiof", (kernel_ulong_t)&r8a779x_data }, {}, }; MODULE_DEVICE_TABLE(platform, spi_driver_ids); -- cgit v1.2.3 From 7850cdfc8028cc7d522c032f64c62c1c01e85875 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Tue, 2 Sep 2014 17:01:01 +0800 Subject: spi: sirf: correct spi gpio and hardware chipselect behaviour the old codes check the cs-gpios, if the gpio number is 0 like: <&gpio, 0, 0>, the driver will use the only hardware chipselect. this is wrong because of_spi_register_master() can read property cs-gpios from device node and set the spi master's cs number and gpio cs automatically based on whether the cs-gpios is valid. this patch fixes the beviour of CSR spi driver and move to a core level supported way. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 86 +++++++++++++++++++------------------------------- 1 file changed, 33 insertions(+), 53 deletions(-) diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 95ac276eaafe..44ec3bbbf5a4 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -170,8 +170,7 @@ struct sirfsoc_spi { * command model */ bool tx_by_cmd; - - int chipselect[0]; + bool hw_cs; }; static void spi_sirfsoc_rx_word_u8(struct sirfsoc_spi *sspi) @@ -484,7 +483,7 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value) { struct sirfsoc_spi *sspi = spi_master_get_devdata(spi->master); - if (sspi->chipselect[spi->chip_select] == 0) { + if (sspi->hw_cs) { u32 regval = readl(sspi->base + SIRFSOC_SPI_CTRL); switch (value) { case BITBANG_CS_ACTIVE: @@ -502,14 +501,13 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value) } writel(regval, sspi->base + SIRFSOC_SPI_CTRL); } else { - int gpio = sspi->chipselect[spi->chip_select]; switch (value) { case BITBANG_CS_ACTIVE: - gpio_direction_output(gpio, + gpio_direction_output(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 1 : 0); break; case BITBANG_CS_INACTIVE: - gpio_direction_output(gpio, + gpio_direction_output(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); break; } @@ -603,8 +601,8 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) sspi->tx_by_cmd = false; } /* - * set spi controller in RISC chipselect mode, we are controlling CS by - * software BITBANG_CS_ACTIVE and BITBANG_CS_INACTIVE. + * it should never set to hardware cs mode because in hardware cs mode, + * cs signal can't controlled by driver. */ regval |= SIRFSOC_SPI_CS_IO_MODE; writel(regval, sspi->base + SIRFSOC_SPI_CTRL); @@ -627,9 +625,17 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) static int spi_sirfsoc_setup(struct spi_device *spi) { + struct sirfsoc_spi *sspi; + if (!spi->max_speed_hz) return -EINVAL; + sspi = spi_master_get_devdata(spi->master); + + if (spi->cs_gpio == -ENOENT) + sspi->hw_cs = true; + else + sspi->hw_cs = false; return spi_sirfsoc_setup_transfer(spi, NULL); } @@ -638,19 +644,10 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) struct sirfsoc_spi *sspi; struct spi_master *master; struct resource *mem_res; - int num_cs, cs_gpio, irq; - int i; - int ret; - - ret = of_property_read_u32(pdev->dev.of_node, - "sirf,spi-num-chipselects", &num_cs); - if (ret < 0) { - dev_err(&pdev->dev, "Unable to get chip select number\n"); - goto err_cs; - } + int irq; + int i, ret; - master = spi_alloc_master(&pdev->dev, - sizeof(*sspi) + sizeof(int) * num_cs); + master = spi_alloc_master(&pdev->dev, sizeof(*sspi)); if (!master) { dev_err(&pdev->dev, "Unable to allocate SPI master\n"); return -ENOMEM; @@ -658,32 +655,6 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, master); sspi = spi_master_get_devdata(master); - master->num_chipselect = num_cs; - - for (i = 0; i < master->num_chipselect; i++) { - cs_gpio = of_get_named_gpio(pdev->dev.of_node, "cs-gpios", i); - if (cs_gpio < 0) { - dev_err(&pdev->dev, "can't get cs gpio from DT\n"); - ret = -ENODEV; - goto free_master; - } - - sspi->chipselect[i] = cs_gpio; - if (cs_gpio == 0) - continue; /* use cs from spi controller */ - - ret = gpio_request(cs_gpio, DRIVER_NAME); - if (ret) { - while (i > 0) { - i--; - if (sspi->chipselect[i] > 0) - gpio_free(sspi->chipselect[i]); - } - dev_err(&pdev->dev, "fail to request cs gpios\n"); - goto free_master; - } - } - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); sspi->base = devm_ioremap_resource(&pdev->dev, mem_res); if (IS_ERR(sspi->base)) { @@ -753,7 +724,21 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) ret = spi_bitbang_start(&sspi->bitbang); if (ret) goto free_dummypage; - + for (i = 0; master->cs_gpios && i < master->num_chipselect; i++) { + if (master->cs_gpios[i] == -ENOENT) + continue; + if (!gpio_is_valid(master->cs_gpios[i])) { + dev_err(&pdev->dev, "no valid gpio\n"); + ret = -EINVAL; + goto free_dummypage; + } + ret = devm_gpio_request(&pdev->dev, + master->cs_gpios[i], DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, "failed to request gpio\n"); + goto free_dummypage; + } + } dev_info(&pdev->dev, "registerred, bus number = %d\n", master->bus_num); return 0; @@ -768,7 +753,7 @@ free_rx_dma: dma_release_channel(sspi->rx_chan); free_master: spi_master_put(master); -err_cs: + return ret; } @@ -776,16 +761,11 @@ static int spi_sirfsoc_remove(struct platform_device *pdev) { struct spi_master *master; struct sirfsoc_spi *sspi; - int i; master = platform_get_drvdata(pdev); sspi = spi_master_get_devdata(master); spi_bitbang_stop(&sspi->bitbang); - for (i = 0; i < master->num_chipselect; i++) { - if (sspi->chipselect[i] > 0) - gpio_free(sspi->chipselect[i]); - } kfree(sspi->dummypage); clk_disable_unprepare(sspi->clk); clk_put(sspi->clk); -- cgit v1.2.3 From 0021d97334d207169d2935489b8be11dc52c54a8 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Tue, 2 Sep 2014 17:01:04 +0800 Subject: spi: sirf: fix 'cmd_transfer' function typos unify 'cmd_transfer' like 'pio_transfer' and 'dma_transfer' as void function, and also change left_rx_word according to transfer result. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 44ec3bbbf5a4..d6308e6a9b47 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -303,7 +303,7 @@ static void spi_sirfsoc_dma_fini_callback(void *data) complete(dma_complete); } -static int spi_sirfsoc_cmd_transfer(struct spi_device *spi, +static void spi_sirfsoc_cmd_transfer(struct spi_device *spi, struct spi_transfer *t) { struct sirfsoc_spi *sspi; @@ -325,10 +325,9 @@ static int spi_sirfsoc_cmd_transfer(struct spi_device *spi, sspi->base + SIRFSOC_SPI_TX_RX_EN); if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) { dev_err(&spi->dev, "cmd transfer timeout\n"); - return 0; + return; } - - return t->len; + sspi->left_rx_word -= t->len; } static void spi_sirfsoc_dma_transfer(struct spi_device *spi, -- cgit v1.2.3 From 9593e61582248fe30b099d59d15edd5a30f87add Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Tue, 2 Sep 2014 17:02:36 +0800 Subject: spi: sirf: cleanup the indentation of marcos let "#define" statement keep same indentation. the old code layout is pretty ugly. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index d6308e6a9b47..adbabbdfc7f0 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -62,15 +62,15 @@ #define SIRFSOC_SPI_TRAN_DAT_FORMAT_12 (1 << 26) #define SIRFSOC_SPI_TRAN_DAT_FORMAT_16 (2 << 26) #define SIRFSOC_SPI_TRAN_DAT_FORMAT_32 (3 << 26) -#define SIRFSOC_SPI_CMD_BYTE_NUM(x) ((x & 3) << 28) -#define SIRFSOC_SPI_ENA_AUTO_CLR BIT(30) -#define SIRFSOC_SPI_MUL_DAT_MODE BIT(31) +#define SIRFSOC_SPI_CMD_BYTE_NUM(x) ((x & 3) << 28) +#define SIRFSOC_SPI_ENA_AUTO_CLR BIT(30) +#define SIRFSOC_SPI_MUL_DAT_MODE BIT(31) /* Interrupt Enable */ -#define SIRFSOC_SPI_RX_DONE_INT_EN BIT(0) -#define SIRFSOC_SPI_TX_DONE_INT_EN BIT(1) -#define SIRFSOC_SPI_RX_OFLOW_INT_EN BIT(2) -#define SIRFSOC_SPI_TX_UFLOW_INT_EN BIT(3) +#define SIRFSOC_SPI_RX_DONE_INT_EN BIT(0) +#define SIRFSOC_SPI_TX_DONE_INT_EN BIT(1) +#define SIRFSOC_SPI_RX_OFLOW_INT_EN BIT(2) +#define SIRFSOC_SPI_TX_UFLOW_INT_EN BIT(3) #define SIRFSOC_SPI_RX_IO_DMA_INT_EN BIT(4) #define SIRFSOC_SPI_TX_IO_DMA_INT_EN BIT(5) #define SIRFSOC_SPI_RXFIFO_FULL_INT_EN BIT(6) @@ -79,7 +79,7 @@ #define SIRFSOC_SPI_TXFIFO_THD_INT_EN BIT(9) #define SIRFSOC_SPI_FRM_END_INT_EN BIT(10) -#define SIRFSOC_SPI_INT_MASK_ALL 0x1FFF +#define SIRFSOC_SPI_INT_MASK_ALL 0x1FFF /* Interrupt status */ #define SIRFSOC_SPI_RX_DONE BIT(0) -- cgit v1.2.3 From 73e3f1eb51888303389f2dc2219c97ce34ca6db0 Mon Sep 17 00:00:00 2001 From: Kiran Padwal Date: Thu, 18 Sep 2014 12:57:47 +0530 Subject: spi: pl022: Add missing error check for devm_kzalloc Currently this driver is missing a check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. This patch adds a missing check. Signed-off-by: Kiran Padwal Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 1189cfd96477..7f13f3f7198b 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2100,6 +2100,10 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) pl022->vendor = id->data; pl022->chipselects = devm_kzalloc(dev, num_cs * sizeof(int), GFP_KERNEL); + if (!pl022->chipselects) { + status = -ENOMEM; + goto err_no_mem; + } /* * Bus Number Which has been Assigned to this SSP controller @@ -2241,6 +2245,7 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) amba_release_regions(adev); err_no_ioregion: err_no_gpio: + err_no_mem: spi_master_put(master); return status; } -- cgit v1.2.3 From db4fa45ed3182d8206af241811dfc99369ffa849 Mon Sep 17 00:00:00 2001 From: Anders Berg Date: Wed, 17 Sep 2014 08:46:58 +0200 Subject: spi: pl022: Add support for chip select extension Add support for a extended PL022 which has an extra register for controlling up to five chip select signals. This controller is found on the AXM5516 SoC. Unfortunately the PrimeCell identification registers are identical to a standard ARM PL022. To work around this, the peripheral ID must be overridden in the device tree using the "arm,primecell-periphid" property with the value 0x000b6022. Signed-off-by: Anders Berg Acked-by: Linus Walleij Acked-by: Russell King Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++- include/linux/amba/bus.h | 5 ++++ 2 files changed, 63 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 7f13f3f7198b..d0741b2eabb4 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -82,6 +82,7 @@ #define SSP_MIS(r) (r + 0x01C) #define SSP_ICR(r) (r + 0x020) #define SSP_DMACR(r) (r + 0x024) +#define SSP_CSR(r) (r + 0x030) /* vendor extension */ #define SSP_ITCR(r) (r + 0x080) #define SSP_ITIP(r) (r + 0x084) #define SSP_ITOP(r) (r + 0x088) @@ -197,6 +198,12 @@ /* Transmit DMA Enable bit */ #define SSP_DMACR_MASK_TXDMAE (0x1UL << 1) +/* + * SSP Chip Select Control Register - SSP_CSR + * (vendor extension) + */ +#define SSP_CSR_CSVALUE_MASK (0x1FUL << 0) + /* * SSP Integration Test control Register - SSP_ITCR */ @@ -313,6 +320,7 @@ enum ssp_writing { * @extended_cr: 32 bit wide control register 0 with extra * features and extra features in CR1 as found in the ST variants * @pl023: supports a subset of the ST extensions called "PL023" + * @internal_cs_ctrl: supports chip select control register */ struct vendor_data { int fifodepth; @@ -321,6 +329,7 @@ struct vendor_data { bool extended_cr; bool pl023; bool loopback; + bool internal_cs_ctrl; }; /** @@ -440,9 +449,32 @@ static void null_cs_control(u32 command) pr_debug("pl022: dummy chip select control, CS=0x%x\n", command); } +/** + * internal_cs_control - Control chip select signals via SSP_CSR. + * @pl022: SSP driver private data structure + * @command: select/delect the chip + * + * Used on controller with internal chip select control via SSP_CSR register + * (vendor extension). Each of the 5 LSB in the register controls one chip + * select signal. + */ +static void internal_cs_control(struct pl022 *pl022, u32 command) +{ + u32 tmp; + + tmp = readw(SSP_CSR(pl022->virtbase)); + if (command == SSP_CHIP_SELECT) + tmp &= ~BIT(pl022->cur_cs); + else + tmp |= BIT(pl022->cur_cs); + writew(tmp, SSP_CSR(pl022->virtbase)); +} + static void pl022_cs_control(struct pl022 *pl022, u32 command) { - if (gpio_is_valid(pl022->cur_cs)) + if (pl022->vendor->internal_cs_ctrl) + internal_cs_control(pl022, command); + else if (gpio_is_valid(pl022->cur_cs)) gpio_set_value(pl022->cur_cs, command); else pl022->cur_chip->cs_control(command); @@ -2122,6 +2154,9 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) if (platform_info->num_chipselect && platform_info->chipselects) { for (i = 0; i < num_cs; i++) pl022->chipselects[i] = platform_info->chipselects[i]; + } else if (pl022->vendor->internal_cs_ctrl) { + for (i = 0; i < num_cs; i++) + pl022->chipselects[i] = i; } else if (IS_ENABLED(CONFIG_OF)) { for (i = 0; i < num_cs; i++) { int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); @@ -2352,6 +2387,7 @@ static struct vendor_data vendor_arm = { .extended_cr = false, .pl023 = false, .loopback = true, + .internal_cs_ctrl = false, }; static struct vendor_data vendor_st = { @@ -2361,6 +2397,7 @@ static struct vendor_data vendor_st = { .extended_cr = true, .pl023 = false, .loopback = true, + .internal_cs_ctrl = false, }; static struct vendor_data vendor_st_pl023 = { @@ -2370,6 +2407,17 @@ static struct vendor_data vendor_st_pl023 = { .extended_cr = true, .pl023 = true, .loopback = false, + .internal_cs_ctrl = false, +}; + +static struct vendor_data vendor_lsi = { + .fifodepth = 8, + .max_bpw = 16, + .unidir = false, + .extended_cr = false, + .pl023 = false, + .loopback = true, + .internal_cs_ctrl = true, }; static struct amba_id pl022_ids[] = { @@ -2403,6 +2451,15 @@ static struct amba_id pl022_ids[] = { .mask = 0xffffffff, .data = &vendor_st_pl023, }, + { + /* + * PL022 variant that has a chip select control register whih + * allows control of 5 output signals nCS[0:4]. + */ + .id = 0x000b6022, + .mask = 0x000fffff, + .data = &vendor_lsi, + }, { 0, 0 }, }; diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index fdd7e1b61f60..c324f5700d1a 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -44,10 +44,15 @@ struct amba_driver { const struct amba_id *id_table; }; +/* + * Constants for the designer field of the Peripheral ID register. When bit 7 + * is set to '1', bits [6:0] should be the JEP106 manufacturer identity code. + */ enum amba_vendor { AMBA_VENDOR_ARM = 0x41, AMBA_VENDOR_ST = 0x80, AMBA_VENDOR_QCOM = 0x51, + AMBA_VENDOR_LSI = 0xb6, }; extern struct bus_type amba_bustype; -- cgit v1.2.3