From 2e61069b056f7ac3cde5f84a4be8aa703b57089d Mon Sep 17 00:00:00 2001 From: Sinan Kaya Date: Sun, 30 Dec 2018 20:40:05 +0000 Subject: ACPI: Fix build failure when CONFIG_NLS is set to 'n' Observing link failure as follows when CONFIG_ACPI is set but both CONFIG_NLS and CONFIG_PCI are no set: drivers/acpi/device_sysfs.o: In function `description_show': device_sysfs.c:(.text+0x48a): undefined reference to `utf16s_to_utf8s' This issue was previously addressed implicitly by commit 8a226e00eeed (PCI: pci-label: Fix build failure when CONFIG_NLS is set to 'm' by allmodconfig) causing PCI_LABEL to be selected when ACPI was set which caused NLS to be selected too in that case. However, after commit 5d32a66541c46 (PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set) it is possible to build ACPI support without PCI, so make ACPI select NLS directly to cover that case. Fixes: 5d32a66541c46 (PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set) Signed-off-by: Sinan Kaya [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 7b65a807b3dd..90ff0a47c12e 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -10,6 +10,7 @@ menuconfig ACPI bool "ACPI (Advanced Configuration and Power Interface) Support" depends on ARCH_SUPPORTS_ACPI select PNP + select NLS default y if X86 help Advanced Configuration and Power Interface (ACPI) support for -- cgit v1.2.3 From 7d7b467cb95bf29597b417d4990160d4ea6d69b9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 30 Dec 2018 18:25:00 +0100 Subject: ACPI: power: Skip duplicate power resource references in _PRx Some ACPI tables contain duplicate power resource references like this: Name (_PR0, Package (0x04) // _PR0: Power Resources for D0 { P28P, P18P, P18P, CLK4 }) This causes a WARN_ON in sysfs_add_link_to_group() because we end up adding a link to the same acpi_device twice: sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1 Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016 Call Trace: dump_stack+0x5c/0x80 sysfs_warn_dup.cold.3+0x17/0x2a sysfs_do_create_link_sd.isra.2+0xa9/0xb0 sysfs_add_link_to_group+0x30/0x50 acpi_power_expose_list+0x74/0xa0 acpi_power_add_remove_device+0x50/0xa0 acpi_add_single_object+0x26b/0x5f0 acpi_bus_check_add+0xc4/0x250 ... To address this issue, make acpi_extract_power_resources() check for duplicates and simply skip them when found. Cc: All applicable Signed-off-by: Hans de Goede [ rjw: Subject & changelog, comments ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/power.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 1b475bc1ae16..665e93ca0b40 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -131,6 +131,23 @@ void acpi_power_resources_list_free(struct list_head *list) } } +static bool acpi_power_resource_is_dup(union acpi_object *package, + unsigned int start, unsigned int i) +{ + acpi_handle rhandle, dup; + unsigned int j; + + /* The caller is expected to check the package element types */ + rhandle = package->package.elements[i].reference.handle; + for (j = start; j < i; j++) { + dup = package->package.elements[j].reference.handle; + if (dup == rhandle) + return true; + } + + return false; +} + int acpi_extract_power_resources(union acpi_object *package, unsigned int start, struct list_head *list) { @@ -150,6 +167,11 @@ int acpi_extract_power_resources(union acpi_object *package, unsigned int start, err = -ENODEV; break; } + + /* Some ACPI tables contain duplicate power resource references */ + if (acpi_power_resource_is_dup(package, start, i)) + continue; + err = acpi_add_power_resource(rhandle); if (err) break; -- cgit v1.2.3 From b9ced18acf68dffebe6888c7ec765a2b1db7a039 Mon Sep 17 00:00:00 2001 From: Chao Fan Date: Wed, 26 Dec 2018 11:34:50 +0800 Subject: ACPI: NUMA: Use correct type for printing addresses on i386-PAE The addresses of NUMA nodes are not printed correctly on i386-PAE which is misleading. Here is a debian9-32bit with PAE in a QEMU guest having more than 4G of memory: qemu-system-i386 \ -hda /var/lib/libvirt/images/debian32.qcow2 \ -m 5G \ -enable-kvm \ -smp 10 \ -numa node,mem=512M,nodeid=0,cpus=0 \ -numa node,mem=512M,nodeid=1,cpus=1 \ -numa node,mem=512M,nodeid=2,cpus=2 \ -numa node,mem=512M,nodeid=3,cpus=3 \ -numa node,mem=512M,nodeid=4,cpus=4 \ -numa node,mem=512M,nodeid=5,cpus=5 \ -numa node,mem=512M,nodeid=6,cpus=6 \ -numa node,mem=512M,nodeid=7,cpus=7 \ -numa node,mem=512M,nodeid=8,cpus=8 \ -numa node,mem=512M,nodeid=9,cpus=9 \ -serial stdio Because of the wrong value type, it prints as below: [ 0.021049] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.021740] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.022425] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.023092] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.023764] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.024431] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.025104] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.025791] ACPI: SRAT Memory (0x0 length 0x20000000) in proximity domain 6 enabled [ 0.026412] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 7 enabled [ 0.027118] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 8 enabled [ 0.027802] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 9 enabled The upper half of the start address of the NUMA domains between 6 and 9 inclusive was cut, so the printed values are incorrect. Fix the value type, to get the correct values in the log as follows: [ 0.023698] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.024325] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.024981] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.025659] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.026317] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.026980] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.027635] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.028311] ACPI: SRAT Memory (0x100000000 length 0x20000000) in proximity domain 6 enabled [ 0.028985] ACPI: SRAT Memory (0x120000000 length 0x20000000) in proximity domain 7 enabled [ 0.029667] ACPI: SRAT Memory (0x140000000 length 0x20000000) in proximity domain 8 enabled [ 0.030334] ACPI: SRAT Memory (0x160000000 length 0x20000000) in proximity domain 9 enabled Signed-off-by: Chao Fan [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/numa.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 274699463b4f..7bbbf8256a41 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -146,9 +146,9 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header) { struct acpi_srat_mem_affinity *p = (struct acpi_srat_mem_affinity *)header; - pr_debug("SRAT Memory (0x%lx length 0x%lx) in proximity domain %d %s%s%s\n", - (unsigned long)p->base_address, - (unsigned long)p->length, + pr_debug("SRAT Memory (0x%llx length 0x%llx) in proximity domain %d %s%s%s\n", + (unsigned long long)p->base_address, + (unsigned long long)p->length, p->proximity_domain, (p->flags & ACPI_SRAT_MEM_ENABLED) ? "enabled" : "disabled", -- cgit v1.2.3 From 2b531d71595d2b5b12782a49b23c335869e2621e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 4 Jan 2019 23:10:54 +0100 Subject: ACPI / PMIC: xpower: Fix TS-pin current-source handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current-source used for the battery temp-sensor (TS) is shared with the GPADC. For proper fuel-gauge and charger operation the TS current-source needs to be permanently on. But to read the GPADC we need to temporary switch the TS current-source to ondemand, so that the GPADC can use it, otherwise we will always read an all 0 value. The switching from on to on-ondemand is not necessary when the TS current-source is off (this happens on devices which do not have a TS). Prior to this commit there were 2 issues with our handling of the TS current-source switching: 1) We were writing hardcoded values to the ADC TS pin-ctrl register, overwriting various other unrelated bits. Specifically we were overwriting the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA independent of its original setting. On a Chuwi Vi10 tablet this was causing us to get a too high adc value (due to a too high current-source) resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in: ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR This commit fixes this by using regmap_update_bits to change only the relevant bits. 2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally enabling the TS current-source even on devices where the TS-pin is not used and the current-source thus was off on entry of the function. This commit fixes this by checking if the TS current-source is off when entering intel_xpower_pmic_get_raw_temp() and if so it is left as is. Fixes: 58eefe2f3f53 (ACPI / PMIC: xpower: Do pinswitch ... reading GPADC) Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Cc: 4.14+ # 4.14+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/pmic/intel_pmic_xpower.c | 41 ++++++++++++++++++++++++++++------- 1 file changed, 33 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c index 2579675b7082..e7c0006e6602 100644 --- a/drivers/acpi/pmic/intel_pmic_xpower.c +++ b/drivers/acpi/pmic/intel_pmic_xpower.c @@ -20,8 +20,11 @@ #define GPI1_LDO_ON (3 << 0) #define GPI1_LDO_OFF (4 << 0) -#define AXP288_ADC_TS_PIN_GPADC 0xf2 -#define AXP288_ADC_TS_PIN_ON 0xf3 +#define AXP288_ADC_TS_CURRENT_ON_OFF_MASK GENMASK(1, 0) +#define AXP288_ADC_TS_CURRENT_OFF (0 << 0) +#define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING (1 << 0) +#define AXP288_ADC_TS_CURRENT_ON_ONDEMAND (2 << 0) +#define AXP288_ADC_TS_CURRENT_ON (3 << 0) static struct pmic_table power_table[] = { { @@ -212,22 +215,44 @@ out: */ static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg) { + int ret, adc_ts_pin_ctrl; u8 buf[2]; - int ret; - ret = regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, - AXP288_ADC_TS_PIN_GPADC); + /* + * The current-source used for the battery temp-sensor (TS) is shared + * with the GPADC. For proper fuel-gauge and charger operation the TS + * current-source needs to be permanently on. But to read the GPADC we + * need to temporary switch the TS current-source to ondemand, so that + * the GPADC can use it, otherwise we will always read an all 0 value. + * + * Note that the switching from on to on-ondemand is not necessary + * when the TS current-source is off (this happens on devices which + * do not use the TS-pin). + */ + ret = regmap_read(regmap, AXP288_ADC_TS_PIN_CTRL, &adc_ts_pin_ctrl); if (ret) return ret; - /* After switching to the GPADC pin give things some time to settle */ - usleep_range(6000, 10000); + if (adc_ts_pin_ctrl & AXP288_ADC_TS_CURRENT_ON_OFF_MASK) { + ret = regmap_update_bits(regmap, AXP288_ADC_TS_PIN_CTRL, + AXP288_ADC_TS_CURRENT_ON_OFF_MASK, + AXP288_ADC_TS_CURRENT_ON_ONDEMAND); + if (ret) + return ret; + + /* Wait a bit after switching the current-source */ + usleep_range(6000, 10000); + } ret = regmap_bulk_read(regmap, AXP288_GP_ADC_H, buf, 2); if (ret == 0) ret = (buf[0] << 4) + ((buf[1] >> 4) & 0x0f); - regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON); + if (adc_ts_pin_ctrl & AXP288_ADC_TS_CURRENT_ON_OFF_MASK) { + regmap_update_bits(regmap, AXP288_ADC_TS_PIN_CTRL, + AXP288_ADC_TS_CURRENT_ON_OFF_MASK, + AXP288_ADC_TS_CURRENT_ON); + } return ret; } -- cgit v1.2.3