From 52f171abaecb822f8c3fee4dc9887d12bea0e63a Mon Sep 17 00:00:00 2001 From: Andreas Klinger Date: Tue, 26 Mar 2019 14:39:40 +0100 Subject: devantech-srf04.yaml: transform DT binding to YAML devantech-srf04.yaml: yaml devicetree binding for iio ultrasonic proximity driver of devantech srf04 use devantech-srf04.txt, transform binding into yaml and remove the outdated DT documentation Signed-off-by: Andreas Klinger Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron --- .../bindings/iio/proximity/devantech-srf04.txt | 28 ---------- .../bindings/iio/proximity/devantech-srf04.yaml | 59 ++++++++++++++++++++++ 2 files changed, 59 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt create mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt deleted file mode 100644 index d4dc7a227e2e..000000000000 --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Devantech SRF04 ultrasonic range finder - Bit-banging driver using two GPIOs - -Required properties: - - compatible: Should be "devantech,srf04" - - - trig-gpios: Definition of the GPIO for the triggering (output) - This GPIO is set for about 10 us by the driver to tell the - device it should initiate the measurement cycle. - - - echo-gpios: Definition of the GPIO for the echo (input) - This GPIO is set by the device as soon as an ultrasonic - burst is sent out and reset when the first echo is - received. - Thus this GPIO is set while the ultrasonic waves are doing - one round trip. - It needs to be an GPIO which is able to deliver an - interrupt because the time between two interrupts is - measured in the driver. - See Documentation/devicetree/bindings/gpio/gpio.txt for - information on how to specify a consumer gpio. - -Example: -srf04@0 { - compatible = "devantech,srf04"; - trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - echo-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml new file mode 100644 index 000000000000..e7aab785c97d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/devantech-srf04.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Devantech SRF04 ultrasonic range finder + +maintainers: + - Andreas Klinger + +description: | + Bit-banging driver using two GPIOs: + - trigger-gpio is raised by the driver to start sending out an ultrasonic + burst + - echo-gpio is held high by the sensor after sending ultrasonic burst + until it is received once again + + Specifications about the driver can be found at: + http://www.robot-electronics.co.uk/htm/srf04tech.htm + +properties: + compatible: + items: + - const: devantech,srf04 + + trig-gpios: + description: + Definition of the GPIO for the triggering (output) This GPIO is set + for about 10 us by the driver to tell the device it should initiate + the measurement cycle. + maxItems: 1 + + echo-gpios: + description: + Definition of the GPIO for the echo (input) + This GPIO is set by the device as soon as an ultrasonic burst is sent + out and reset when the first echo is received. + Thus this GPIO is set while the ultrasonic waves are doing one round + trip. + It needs to be an GPIO which is able to deliver an interrupt because + the time between two interrupts is measured in the driver. + See Documentation/devicetree/bindings/gpio/gpio.txt for information + on how to specify a consumer gpio. + maxItems: 1 + +required: + - compatible + - trig-gpios + - echo-gpios + +examples: + - | + #include + proximity { + compatible = "devantech,srf04"; + trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + echo-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + }; -- cgit v1.2.3