From b04db9ac4f7641332e0133b2fd8f82e6e4553947 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 21 Jun 2012 11:53:44 +0300
Subject: iwlwifi: configure the queues from the op_mode

Since the op_mode defines the queue mapping, let it do it
completely through the API functions.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/commands.h  | 40 +++++++++++++++++++-
 drivers/net/wireless/iwlwifi/dvm/dev.h       | 16 --------
 drivers/net/wireless/iwlwifi/dvm/main.c      | 56 +---------------------------
 drivers/net/wireless/iwlwifi/dvm/ucode.c     | 37 ++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-trans.h     | 27 +++++++++-----
 drivers/net/wireless/iwlwifi/pcie/internal.h |  3 +-
 drivers/net/wireless/iwlwifi/pcie/trans.c    | 22 ++---------
 7 files changed, 98 insertions(+), 103 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/dvm/commands.h b/drivers/net/wireless/iwlwifi/dvm/commands.h
index 64811cd91635..97bea16f3592 100644
--- a/drivers/net/wireless/iwlwifi/dvm/commands.h
+++ b/drivers/net/wireless/iwlwifi/dvm/commands.h
@@ -190,6 +190,44 @@ enum {
 	REPLY_MAX = 0xff
 };
 
+/*
+ * Minimum number of queues. MAX_NUM is defined in hw specific files.
+ * Set the minimum to accommodate
+ *  - 4 standard TX queues
+ *  - the command queue
+ *  - 4 PAN TX queues
+ *  - the PAN multicast queue, and
+ *  - the AUX (TX during scan dwell) queue.
+ */
+#define IWL_MIN_NUM_QUEUES	11
+
+/*
+ * Command queue depends on iPAN support.
+ */
+#define IWL_DEFAULT_CMD_QUEUE_NUM	4
+#define IWL_IPAN_CMD_QUEUE_NUM		9
+
+#define IWL_TX_FIFO_BK		0	/* shared */
+#define IWL_TX_FIFO_BE		1
+#define IWL_TX_FIFO_VI		2	/* shared */
+#define IWL_TX_FIFO_VO		3
+#define IWL_TX_FIFO_BK_IPAN	IWL_TX_FIFO_BK
+#define IWL_TX_FIFO_BE_IPAN	4
+#define IWL_TX_FIFO_VI_IPAN	IWL_TX_FIFO_VI
+#define IWL_TX_FIFO_VO_IPAN	5
+/* re-uses the VO FIFO, uCode will properly flush/schedule */
+#define IWL_TX_FIFO_AUX		5
+#define IWL_TX_FIFO_UNUSED	255
+
+#define IWLAGN_CMD_FIFO_NUM	7
+
+/*
+ * This queue number is required for proper operation
+ * because the ucode will stop/start the scheduler as
+ * required.
+ */
+#define IWL_IPAN_MCAST_QUEUE	8
+
 /******************************************************************************
  * (0)
  * Commonly used structures and definitions:
@@ -755,8 +793,6 @@ struct iwl_qosparam_cmd {
 #define IWLAGN_BROADCAST_ID	15
 #define	IWLAGN_STATION_COUNT	16
 
-#define	IWL_INVALID_STATION 	255
-#define IWL_MAX_TID_COUNT	8
 #define IWL_TID_NON_QOS IWL_MAX_TID_COUNT
 
 #define STA_FLG_TX_RATE_MSK		cpu_to_le32(1 << 2)
diff --git a/drivers/net/wireless/iwlwifi/dvm/dev.h b/drivers/net/wireless/iwlwifi/dvm/dev.h
index 54cf085ddc89..054f728f6266 100644
--- a/drivers/net/wireless/iwlwifi/dvm/dev.h
+++ b/drivers/net/wireless/iwlwifi/dvm/dev.h
@@ -90,22 +90,6 @@
 
 #define IWL_NUM_SCAN_RATES         (2)
 
-/*
- * Minimum number of queues. MAX_NUM is defined in hw specific files.
- * Set the minimum to accommodate
- *  - 4 standard TX queues
- *  - the command queue
- *  - 4 PAN TX queues
- *  - the PAN multicast queue, and
- *  - the AUX (TX during scan dwell) queue.
- */
-#define IWL_MIN_NUM_QUEUES	11
-
-/*
- * Command queue depends on iPAN support.
- */
-#define IWL_DEFAULT_CMD_QUEUE_NUM	4
-#define IWL_IPAN_CMD_QUEUE_NUM		9
 
 #define IEEE80211_DATA_LEN              2304
 #define IEEE80211_4ADDR_LEN             30
diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index abfd7916bde6..612f05d757db 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -518,49 +518,6 @@ static void iwl_bg_tx_flush(struct work_struct *work)
  * queue/FIFO/AC mapping definitions
  */
 
-#define IWL_TX_FIFO_BK		0	/* shared */
-#define IWL_TX_FIFO_BE		1
-#define IWL_TX_FIFO_VI		2	/* shared */
-#define IWL_TX_FIFO_VO		3
-#define IWL_TX_FIFO_BK_IPAN	IWL_TX_FIFO_BK
-#define IWL_TX_FIFO_BE_IPAN	4
-#define IWL_TX_FIFO_VI_IPAN	IWL_TX_FIFO_VI
-#define IWL_TX_FIFO_VO_IPAN	5
-/* re-uses the VO FIFO, uCode will properly flush/schedule */
-#define IWL_TX_FIFO_AUX		5
-#define IWL_TX_FIFO_UNUSED	-1
-
-#define IWLAGN_CMD_FIFO_NUM	7
-
-/*
- * This queue number is required for proper operation
- * because the ucode will stop/start the scheduler as
- * required.
- */
-#define IWL_IPAN_MCAST_QUEUE	8
-
-static const u8 iwlagn_default_queue_to_tx_fifo[] = {
-	IWL_TX_FIFO_VO,
-	IWL_TX_FIFO_VI,
-	IWL_TX_FIFO_BE,
-	IWL_TX_FIFO_BK,
-	IWLAGN_CMD_FIFO_NUM,
-};
-
-static const u8 iwlagn_ipan_queue_to_tx_fifo[] = {
-	IWL_TX_FIFO_VO,
-	IWL_TX_FIFO_VI,
-	IWL_TX_FIFO_BE,
-	IWL_TX_FIFO_BK,
-	IWL_TX_FIFO_BK_IPAN,
-	IWL_TX_FIFO_BE_IPAN,
-	IWL_TX_FIFO_VI_IPAN,
-	IWL_TX_FIFO_VO_IPAN,
-	IWL_TX_FIFO_BE_IPAN,
-	IWLAGN_CMD_FIFO_NUM,
-	IWL_TX_FIFO_AUX,
-};
-
 static const u8 iwlagn_bss_ac_to_fifo[] = {
 	IWL_TX_FIFO_VO,
 	IWL_TX_FIFO_VI,
@@ -1350,6 +1307,7 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 	else
 		trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED;
 	trans_cfg.command_names = iwl_dvm_cmd_strings;
+	trans_cfg.cmd_fifo = IWLAGN_CMD_FIFO_NUM;
 
 	WARN_ON(sizeof(priv->transport_queue_stop) * BITS_PER_BYTE <
 		priv->cfg->base_params->num_of_queues);
@@ -1363,15 +1321,9 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 	if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) {
 		priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
 		trans_cfg.cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
-		trans_cfg.queue_to_fifo = iwlagn_ipan_queue_to_tx_fifo;
-		trans_cfg.n_queue_to_fifo =
-			ARRAY_SIZE(iwlagn_ipan_queue_to_tx_fifo);
 	} else {
 		priv->sta_key_max_num = STA_KEY_MAX_NUM;
 		trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
-		trans_cfg.queue_to_fifo = iwlagn_default_queue_to_tx_fifo;
-		trans_cfg.n_queue_to_fifo =
-			ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo);
 	}
 
 	/* Configure transport layer */
@@ -1460,9 +1412,6 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 		ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
 		priv->sta_key_max_num = STA_KEY_MAX_NUM;
 		trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
-		trans_cfg.queue_to_fifo = iwlagn_default_queue_to_tx_fifo;
-		trans_cfg.n_queue_to_fifo =
-			ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo);
 
 		/* Configure transport layer again*/
 		iwl_trans_configure(priv->trans, &trans_cfg);
@@ -1480,9 +1429,6 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 		atomic_set(&priv->queue_stop_count[i], 0);
 	}
 
-	WARN_ON(trans_cfg.queue_to_fifo[trans_cfg.cmd_queue] !=
-						IWLAGN_CMD_FIFO_NUM);
-
 	if (iwl_init_drv(priv))
 		goto out_free_eeprom;
 
diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c
index b3a314ba48c7..6d8d6dd7943f 100644
--- a/drivers/net/wireless/iwlwifi/dvm/ucode.c
+++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c
@@ -226,13 +226,50 @@ int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
 	return ret;
 }
 
+static const u8 iwlagn_default_queue_to_tx_fifo[] = {
+	IWL_TX_FIFO_VO,
+	IWL_TX_FIFO_VI,
+	IWL_TX_FIFO_BE,
+	IWL_TX_FIFO_BK,
+};
+
+static const u8 iwlagn_ipan_queue_to_tx_fifo[] = {
+	IWL_TX_FIFO_VO,
+	IWL_TX_FIFO_VI,
+	IWL_TX_FIFO_BE,
+	IWL_TX_FIFO_BK,
+	IWL_TX_FIFO_BK_IPAN,
+	IWL_TX_FIFO_BE_IPAN,
+	IWL_TX_FIFO_VI_IPAN,
+	IWL_TX_FIFO_VO_IPAN,
+	IWL_TX_FIFO_BE_IPAN,
+	IWL_TX_FIFO_UNUSED,
+	IWL_TX_FIFO_AUX,
+};
 
 static int iwl_alive_notify(struct iwl_priv *priv)
 {
+	const u8 *queue_to_txf;
+	u8 n_queues;
 	int ret;
+	int i;
 
 	iwl_trans_fw_alive(priv->trans);
 
+	if (priv->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN &&
+	    priv->eeprom_data->sku & EEPROM_SKU_CAP_IPAN_ENABLE) {
+		n_queues = ARRAY_SIZE(iwlagn_ipan_queue_to_tx_fifo);
+		queue_to_txf = iwlagn_ipan_queue_to_tx_fifo;
+	} else {
+		n_queues = ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo);
+		queue_to_txf = iwlagn_default_queue_to_tx_fifo;
+	}
+
+	for (i = 0; i < n_queues; i++)
+		if (queue_to_txf[i] != IWL_TX_FIFO_UNUSED)
+			iwl_trans_ac_txq_enable(priv->trans, i,
+						queue_to_txf[i]);
+
 	priv->passive_no_rx = false;
 	priv->transport_queue_stop = 0;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 00efde8e5536..867d8e194da4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -290,16 +290,17 @@ static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
  * currently supports
  */
 #define IWL_MAX_HW_QUEUES		32
+#define IWL_INVALID_STATION	255
+#define IWL_MAX_TID_COUNT	8
+#define IWL_FRAME_LIMIT	64
 
 /**
  * struct iwl_trans_config - transport configuration
  *
  * @op_mode: pointer to the upper layer.
- * @queue_to_fifo: queue to FIFO mapping to set up by
- *	default
- * @n_queue_to_fifo: number of queues to set up
  * @cmd_queue: the index of the command queue.
  *	Must be set before start_fw.
+ * @cmd_fifo: the fifo for host commands
  * @no_reclaim_cmds: Some devices erroneously don't set the
  *	SEQ_RX_FRAME bit on some notifications, this is the
  *	list of such notifications to filter. Max length is
@@ -314,10 +315,9 @@ static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
  */
 struct iwl_trans_config {
 	struct iwl_op_mode *op_mode;
-	const u8 *queue_to_fifo;
-	u8 n_queue_to_fifo;
 
 	u8 cmd_queue;
+	u8 cmd_fifo;
 	const u8 *no_reclaim_cmds;
 	int n_no_reclaim_cmds;
 
@@ -355,9 +355,9 @@ struct iwl_trans;
  *	Must be atomic
  * @reclaim: free packet until ssn. Returns a list of freed packets.
  *	Must be atomic
- * @txq_enable: setup a tx queue for AMPDU - will be called once the HW is
- *	ready and a successful ADDBA response has been received.
- *	May sleep
+ * @txq_enable: setup a queue. To setup an AC queue, use the
+ *	iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before
+ *	this one. The op_mode must not configure the HCMD queue. May sleep.
  * @txq_disable: de-configure a Tx queue to send AMPDUs
  *	Must be atomic
  * @wait_tx_queue_empty: wait until all tx queues are empty
@@ -497,9 +497,9 @@ static inline void iwl_trans_fw_alive(struct iwl_trans *trans)
 {
 	might_sleep();
 
-	trans->ops->fw_alive(trans);
-
 	trans->state = IWL_TRANS_FW_ALIVE;
+
+	trans->ops->fw_alive(trans);
 }
 
 static inline int iwl_trans_start_fw(struct iwl_trans *trans,
@@ -593,6 +593,13 @@ static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
 				 frame_limit, ssn);
 }
 
+static inline void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue,
+					   int fifo)
+{
+	iwl_trans_txq_enable(trans, queue, fifo, IWL_INVALID_STATION,
+			     IWL_MAX_TID_COUNT, IWL_FRAME_LIMIT, 0);
+}
+
 static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans)
 {
 	WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h
index 5024fb662bf6..d9694c58208c 100644
--- a/drivers/net/wireless/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/iwlwifi/pcie/internal.h
@@ -269,10 +269,9 @@ struct iwl_trans_pcie {
 	wait_queue_head_t ucode_write_waitq;
 	unsigned long status;
 	u8 cmd_queue;
+	u8 cmd_fifo;
 	u8 n_no_reclaim_cmds;
 	u8 no_reclaim_cmds[MAX_NO_RECLAIM_CMDS];
-	u8 setup_q_to_fifo[IWL_MAX_HW_QUEUES];
-	u8 n_q_to_fifo;
 
 	bool rx_buf_size_8k;
 	u32 rx_page_order;
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 42f369d15f48..bac0eb0d046d 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -1059,7 +1059,7 @@ static void iwl_tx_start(struct iwl_trans *trans)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	u32 a;
-	int i, chan;
+	int chan;
 	u32 reg_val;
 
 	/* make sure all queue are not stopped/used */
@@ -1091,12 +1091,8 @@ static void iwl_tx_start(struct iwl_trans *trans)
 	 */
 	iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
 
-	for (i = 0; i < trans_pcie->n_q_to_fifo; i++) {
-		int fifo = trans_pcie->setup_q_to_fifo[i];
-
-		iwl_trans_pcie_txq_enable(trans, i, fifo, IWL_INVALID_STATION,
-					  IWL_TID_NON_QOS, SCD_FRAME_LIMIT, 0);
-	}
+	iwl_trans_ac_txq_enable(trans, trans_pcie->cmd_queue,
+				trans_pcie->cmd_fifo);
 
 	/* Activate all Tx DMA/FIFO channels */
 	iwl_trans_txq_set_sched(trans, IWL_MASK(0, 7));
@@ -1528,6 +1524,7 @@ static void iwl_trans_pcie_configure(struct iwl_trans *trans,
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 
 	trans_pcie->cmd_queue = trans_cfg->cmd_queue;
+	trans_pcie->cmd_fifo = trans_cfg->cmd_fifo;
 	if (WARN_ON(trans_cfg->n_no_reclaim_cmds > MAX_NO_RECLAIM_CMDS))
 		trans_pcie->n_no_reclaim_cmds = 0;
 	else
@@ -1536,17 +1533,6 @@ static void iwl_trans_pcie_configure(struct iwl_trans *trans,
 		memcpy(trans_pcie->no_reclaim_cmds, trans_cfg->no_reclaim_cmds,
 		       trans_pcie->n_no_reclaim_cmds * sizeof(u8));
 
-	trans_pcie->n_q_to_fifo = trans_cfg->n_queue_to_fifo;
-
-	if (WARN_ON(trans_pcie->n_q_to_fifo > IWL_MAX_HW_QUEUES))
-		trans_pcie->n_q_to_fifo = IWL_MAX_HW_QUEUES;
-
-	/* at least the command queue must be mapped */
-	WARN_ON(!trans_pcie->n_q_to_fifo);
-
-	memcpy(trans_pcie->setup_q_to_fifo, trans_cfg->queue_to_fifo,
-	       trans_pcie->n_q_to_fifo * sizeof(u8));
-
 	trans_pcie->rx_buf_size_8k = trans_cfg->rx_buf_size_8k;
 	if (trans_pcie->rx_buf_size_8k)
 		trans_pcie->rx_page_order = get_order(8 * 1024);
-- 
cgit v1.2.3


From eecf21a126dd23030c66949796561a9b0dde8b6e Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 22 Jun 2012 15:21:02 +0200
Subject: iwlwifi: bump trace message limit

There's one message that goes just over the
limit of 100 characters, so bump the limit to
110 to get rid of the warning from that.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-devtrace.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
index 65364793021f..ad2dba8fc450 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
@@ -176,7 +176,7 @@ TRACE_EVENT(iwlwifi_dev_ucode_wrap_event,
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM iwlwifi_msg
 
-#define MAX_MSG_LEN	100
+#define MAX_MSG_LEN	110
 
 DECLARE_EVENT_CLASS(iwlwifi_msg_event,
 	TP_PROTO(struct va_format *vaf),
-- 
cgit v1.2.3


From 94bfa4a255b3436e9a258585be6687d1f5c02a71 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 22 Jun 2012 19:39:23 +0200
Subject: iwlwifi: use __get_str in tracing

__get_str() is identical to (char *)__get_dynamic_array()
that is in the code now, substitute __get_str to make the
code more readable.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-devtrace.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
index ad2dba8fc450..06ca505bb2cc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
@@ -189,7 +189,7 @@ DECLARE_EVENT_CLASS(iwlwifi_msg_event,
 				       MAX_MSG_LEN, vaf->fmt,
 				       *vaf->va) >= MAX_MSG_LEN);
 	),
-	TP_printk("%s", (char *)__get_dynamic_array(msg))
+	TP_printk("%s", __get_str(msg))
 );
 
 DEFINE_EVENT(iwlwifi_msg_event, iwlwifi_err,
-- 
cgit v1.2.3


From b3a6d2e0e727c3b126093c9b5fcdf41dd12bc4fd Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 22 Jun 2012 15:57:55 +0200
Subject: iwlwifi: limit dwell time more strictly

The dwell time for scanning is currently limited
so that it fits into the timings inside the ucode
when that is tracking DTIM/beacon periods for the
AP(s) it's connected to.

However, when it's connected to two APs, those
may be in lockstep, for example if they both have
a DTIM interval of 100 TU, then one could be 50
TU after the other, leaving only 50 TU free to
be used by scanning.

Since we can't know how far apart they are the
only option is to restrict to 1/2 of the minium
of the two APs.

In theory, it would be possible to not use 1/2 of
the minimum but take into account that if they
have different intervals then there will be a bit
more time since they can't be in lockstep, but as
they will have 100 TU intervals in practice that
complex calculation will probably just result in
hard-to-find bugs.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/scan.c | 37 ++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c
index 6633074258c7..e3467fa86899 100644
--- a/drivers/net/wireless/iwlwifi/dvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/dvm/scan.c
@@ -396,15 +396,21 @@ static u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
 static u16 iwl_limit_dwell(struct iwl_priv *priv, u16 dwell_time)
 {
 	struct iwl_rxon_context *ctx;
+	int limits[NUM_IWL_RXON_CTX] = {};
+	int n_active = 0;
+	u16 limit;
+
+	BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
 
 	/*
 	 * If we're associated, we clamp the dwell time 98%
-	 * of the smallest beacon interval (minus 2 * channel
-	 * tune time)
+	 * of the beacon interval (minus 2 * channel tune time)
+	 * If both contexts are active, we have to restrict to
+	 * 1/2 of the minimum of them, because they might be in
+	 * lock-step with the time inbetween only half of what
+	 * time we'd have in each of them.
 	 */
 	for_each_context(priv, ctx) {
-		u16 value;
-
 		switch (ctx->staging.dev_type) {
 		case RXON_DEV_TYPE_P2P:
 			/* no timing constraints */
@@ -424,14 +430,25 @@ static u16 iwl_limit_dwell(struct iwl_priv *priv, u16 dwell_time)
 			break;
 		}
 
-		value = ctx->beacon_int;
-		if (!value)
-			value = IWL_PASSIVE_DWELL_BASE;
-		value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
-		dwell_time = min(value, dwell_time);
+		limits[n_active++] = ctx->beacon_int ?: IWL_PASSIVE_DWELL_BASE;
 	}
 
-	return dwell_time;
+	switch (n_active) {
+	case 0:
+		return dwell_time;
+	case 2:
+		limit = (limits[1] * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+		limit /= 2;
+		dwell_time = min(limit, dwell_time);
+		/* fall through to limit further */
+	case 1:
+		limit = (limits[0] * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+		limit /= n_active;
+		return min(limit, dwell_time);
+	default:
+		WARN_ON_ONCE(1);
+		return dwell_time;
+	}
 }
 
 static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
-- 
cgit v1.2.3


From 020c876738bf6ea55687543bfd2c0227ddbd3126 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 24 Jun 2012 15:51:59 +0300
Subject: iwlwifi: disable the watchdog for queues by default

I saw that when the watchdog triggers, the packets do go
through if we wait enough time. So we still have an issue
where packets are blocked in the Tx queue for a short while
and this needs to be debugged separately. For now, don't
restart the driver when it is not needed.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index 095547b37a27..6322e2a692cc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -1011,6 +1011,7 @@ struct iwl_mod_params iwlwifi_mod_params = {
 	.power_level = IWL_POWER_INDEX_1,
 	.bt_ch_announce = true,
 	.auto_agg = true,
+	.wd_disable = true,
 	/* the rest are 0 by default */
 };
 EXPORT_SYMBOL_GPL(iwlwifi_mod_params);
-- 
cgit v1.2.3


From cc45ae547b960b805ee0b201b3807e93a0060472 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 21 Jun 2012 22:30:52 +0200
Subject: mac80211: make __ieee80211_recalc_idle static

Since it's not called from any file outside where
it's defined, the function can be static if moved
up in the file before the callers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/ieee80211_i.h |   1 -
 net/mac80211/iface.c       | 242 ++++++++++++++++++++++-----------------------
 2 files changed, 121 insertions(+), 122 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index f834a005e1c5..341d77d472d2 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1284,7 +1284,6 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
 			     enum nl80211_iftype type);
 void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata);
 void ieee80211_remove_interfaces(struct ieee80211_local *local);
-u32 __ieee80211_recalc_idle(struct ieee80211_local *local);
 void ieee80211_recalc_idle(struct ieee80211_local *local);
 void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
 				    const int offset);
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 58c2ab3d483a..0a6b4e1043cb 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -43,6 +43,127 @@
  */
 
 
+static u32 ieee80211_idle_off(struct ieee80211_local *local,
+			      const char *reason)
+{
+	if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
+		return 0;
+
+	local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
+	return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+static u32 ieee80211_idle_on(struct ieee80211_local *local)
+{
+	if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
+		return 0;
+
+	drv_flush(local, false);
+
+	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
+	return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+static u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+	struct ieee80211_sub_if_data *sdata;
+	int count = 0;
+	bool working = false, scanning = false;
+	unsigned int led_trig_start = 0, led_trig_stop = 0;
+	struct ieee80211_roc_work *roc;
+
+#ifdef CONFIG_PROVE_LOCKING
+	WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
+		!lockdep_is_held(&local->iflist_mtx));
+#endif
+	lockdep_assert_held(&local->mtx);
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!ieee80211_sdata_running(sdata)) {
+			sdata->vif.bss_conf.idle = true;
+			continue;
+		}
+
+		sdata->old_idle = sdata->vif.bss_conf.idle;
+
+		/* do not count disabled managed interfaces */
+		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+		    !sdata->u.mgd.associated &&
+		    !sdata->u.mgd.auth_data &&
+		    !sdata->u.mgd.assoc_data) {
+			sdata->vif.bss_conf.idle = true;
+			continue;
+		}
+		/* do not count unused IBSS interfaces */
+		if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+		    !sdata->u.ibss.ssid_len) {
+			sdata->vif.bss_conf.idle = true;
+			continue;
+		}
+		/* count everything else */
+		sdata->vif.bss_conf.idle = false;
+		count++;
+	}
+
+	if (!local->ops->remain_on_channel) {
+		list_for_each_entry(roc, &local->roc_list, list) {
+			working = true;
+			roc->sdata->vif.bss_conf.idle = false;
+		}
+	}
+
+	if (local->scan_sdata &&
+	    !(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) {
+		scanning = true;
+		local->scan_sdata->vif.bss_conf.idle = false;
+	}
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
+		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+			continue;
+		if (sdata->old_idle == sdata->vif.bss_conf.idle)
+			continue;
+		if (!ieee80211_sdata_running(sdata))
+			continue;
+		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
+	}
+
+	if (working || scanning)
+		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
+	else
+		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
+
+	if (count)
+		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
+	else
+		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
+
+	ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
+
+	if (working)
+		return ieee80211_idle_off(local, "working");
+	if (scanning)
+		return ieee80211_idle_off(local, "scanning");
+	if (!count)
+		return ieee80211_idle_on(local);
+	else
+		return ieee80211_idle_off(local, "in use");
+
+	return 0;
+}
+
+void ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+	u32 chg;
+
+	mutex_lock(&local->iflist_mtx);
+	chg = __ieee80211_recalc_idle(local);
+	mutex_unlock(&local->iflist_mtx);
+	if (chg)
+		ieee80211_hw_config(local, chg);
+}
+
 static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
 {
 	int meshhdrlen;
@@ -1403,127 +1524,6 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local)
 	list_del(&unreg_list);
 }
 
-static u32 ieee80211_idle_off(struct ieee80211_local *local,
-			      const char *reason)
-{
-	if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
-		return 0;
-
-	local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
-	return IEEE80211_CONF_CHANGE_IDLE;
-}
-
-static u32 ieee80211_idle_on(struct ieee80211_local *local)
-{
-	if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
-		return 0;
-
-	drv_flush(local, false);
-
-	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
-	return IEEE80211_CONF_CHANGE_IDLE;
-}
-
-u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
-{
-	struct ieee80211_sub_if_data *sdata;
-	int count = 0;
-	bool working = false, scanning = false;
-	unsigned int led_trig_start = 0, led_trig_stop = 0;
-	struct ieee80211_roc_work *roc;
-
-#ifdef CONFIG_PROVE_LOCKING
-	WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
-		!lockdep_is_held(&local->iflist_mtx));
-#endif
-	lockdep_assert_held(&local->mtx);
-
-	list_for_each_entry(sdata, &local->interfaces, list) {
-		if (!ieee80211_sdata_running(sdata)) {
-			sdata->vif.bss_conf.idle = true;
-			continue;
-		}
-
-		sdata->old_idle = sdata->vif.bss_conf.idle;
-
-		/* do not count disabled managed interfaces */
-		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
-		    !sdata->u.mgd.associated &&
-		    !sdata->u.mgd.auth_data &&
-		    !sdata->u.mgd.assoc_data) {
-			sdata->vif.bss_conf.idle = true;
-			continue;
-		}
-		/* do not count unused IBSS interfaces */
-		if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
-		    !sdata->u.ibss.ssid_len) {
-			sdata->vif.bss_conf.idle = true;
-			continue;
-		}
-		/* count everything else */
-		sdata->vif.bss_conf.idle = false;
-		count++;
-	}
-
-	if (!local->ops->remain_on_channel) {
-		list_for_each_entry(roc, &local->roc_list, list) {
-			working = true;
-			roc->sdata->vif.bss_conf.idle = false;
-		}
-	}
-
-	if (local->scan_sdata &&
-	    !(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) {
-		scanning = true;
-		local->scan_sdata->vif.bss_conf.idle = false;
-	}
-
-	list_for_each_entry(sdata, &local->interfaces, list) {
-		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
-		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
-			continue;
-		if (sdata->old_idle == sdata->vif.bss_conf.idle)
-			continue;
-		if (!ieee80211_sdata_running(sdata))
-			continue;
-		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
-	}
-
-	if (working || scanning)
-		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
-	else
-		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
-
-	if (count)
-		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
-	else
-		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
-
-	ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
-
-	if (working)
-		return ieee80211_idle_off(local, "working");
-	if (scanning)
-		return ieee80211_idle_off(local, "scanning");
-	if (!count)
-		return ieee80211_idle_on(local);
-	else
-		return ieee80211_idle_off(local, "in use");
-
-	return 0;
-}
-
-void ieee80211_recalc_idle(struct ieee80211_local *local)
-{
-	u32 chg;
-
-	mutex_lock(&local->iflist_mtx);
-	chg = __ieee80211_recalc_idle(local);
-	mutex_unlock(&local->iflist_mtx);
-	if (chg)
-		ieee80211_hw_config(local, chg);
-}
-
 static int netdev_notify(struct notifier_block *nb,
 			 unsigned long state,
 			 void *ndev)
-- 
cgit v1.2.3


From dfb89c56add259b72a9c68d6b2846c1cd8c4e4b6 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 27 Jun 2012 09:23:48 +0200
Subject: cfg80211: don't allow WoWLAN support without CONFIG_PM

When CONFIG_PM is disabled, no device can possibly
support WoWLAN since it can't go to sleep to start
with. Due to this, mac80211 had even rejected the
hardware registration. By making all the code and
data for WoWLAN depend on CONFIG_PM we can promote
this runtime error to a compile-time error.

Add #ifdef around all WoWLAN code to remove it in
systems that don't need it as they never suspend.

Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Acked-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 2 ++
 drivers/net/wireless/ti/wlcore/main.c      | 2 ++
 include/net/cfg80211.h                     | 2 ++
 net/mac80211/main.c                        | 7 +++----
 net/wireless/core.c                        | 4 ++++
 net/wireless/nl80211.c                     | 6 ++++++
 6 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index f27e9732951d..b8fce0d4d72e 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3487,6 +3487,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	wiphy->cipher_suites = cipher_suites;
 	wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
 
+#ifdef CONFIG_PM
 	wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
 			      WIPHY_WOWLAN_DISCONNECT |
 			      WIPHY_WOWLAN_GTK_REKEY_FAILURE  |
@@ -3496,6 +3497,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	wiphy->wowlan.n_patterns = WOW_MAX_FILTERS_PER_LIST;
 	wiphy->wowlan.pattern_min_len = 1;
 	wiphy->wowlan.pattern_max_len = WOW_PATTERN_SIZE;
+#endif
 
 	wiphy->max_sched_scan_ssids = MAX_PROBED_SSID_INDEX;
 
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 1156e3f578c1..747a997bc608 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5321,6 +5321,7 @@ int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
 		goto out_free_hw;
 	}
 
+#ifdef CONFIG_PM
 	ret = enable_irq_wake(wl->irq);
 	if (!ret) {
 		wl->irq_wake_enabled = true;
@@ -5334,6 +5335,7 @@ int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
 				WL1271_RX_FILTER_MAX_PATTERN_SIZE;
 		}
 	}
+#endif
 	disable_irq(wl->irq);
 
 	ret = wl12xx_get_hw_info(wl);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 061c01957e54..7d3cd3ce9a26 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2153,7 +2153,9 @@ struct wiphy {
 	char fw_version[ETHTOOL_BUSINFO_LEN];
 	u32 hw_version;
 
+#ifdef CONFIG_PM
 	struct wiphy_wowlan_support wowlan;
+#endif
 
 	u16 max_remain_on_channel_duration;
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 0b040fb73673..aded0018f6f3 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -706,12 +706,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	     local->hw.offchannel_tx_hw_queue >= local->hw.queues))
 		return -EINVAL;
 
-	if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns)
 #ifdef CONFIG_PM
-	    && (!local->ops->suspend || !local->ops->resume)
-#endif
-	    )
+	if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns) &&
+	    (!local->ops->suspend || !local->ops->resume))
 		return -EINVAL;
+#endif
 
 	if ((hw->flags & IEEE80211_HW_SCAN_WHILE_IDLE) && !local->ops->hw_scan)
 		return -EINVAL;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 907f62c80e28..ddd32afa5f0a 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -421,9 +421,11 @@ int wiphy_register(struct wiphy *wiphy)
 	int i;
 	u16 ifmodes = wiphy->interface_modes;
 
+#ifdef CONFIG_PM
 	if (WARN_ON((wiphy->wowlan.flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
 		    !(wiphy->wowlan.flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
 		return -EINVAL;
+#endif
 
 	if (WARN_ON(wiphy->ap_sme_capa &&
 		    !(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME)))
@@ -500,12 +502,14 @@ int wiphy_register(struct wiphy *wiphy)
 		return -EINVAL;
 	}
 
+#ifdef CONFIG_PM
 	if (rdev->wiphy.wowlan.n_patterns) {
 		if (WARN_ON(!rdev->wiphy.wowlan.pattern_min_len ||
 			    rdev->wiphy.wowlan.pattern_min_len >
 			    rdev->wiphy.wowlan.pattern_max_len))
 			return -EINVAL;
 	}
+#endif
 
 	/* check and set up bitrates */
 	ieee80211_set_bitrate_flags(wiphy);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 234ff3bbd104..067c9fe02a7f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1112,6 +1112,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		nla_nest_end(msg, nl_ifs);
 	}
 
+#ifdef CONFIG_PM
 	if (dev->wiphy.wowlan.flags || dev->wiphy.wowlan.n_patterns) {
 		struct nlattr *nl_wowlan;
 
@@ -1152,6 +1153,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 
 		nla_nest_end(msg, nl_wowlan);
 	}
+#endif
 
 	if (nl80211_put_iftypes(msg, NL80211_ATTR_SOFTWARE_IFTYPES,
 				dev->wiphy.software_iftypes))
@@ -6276,6 +6278,7 @@ static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info)
 	return cfg80211_leave_mesh(rdev, dev);
 }
 
+#ifdef CONFIG_PM
 static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -6504,6 +6507,7 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
 	kfree(new_triggers.patterns);
 	return err;
 }
+#endif
 
 static int nl80211_set_rekey_data(struct sk_buff *skb, struct genl_info *info)
 {
@@ -7158,6 +7162,7 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+#ifdef CONFIG_PM
 	{
 		.cmd = NL80211_CMD_GET_WOWLAN,
 		.doit = nl80211_get_wowlan,
@@ -7174,6 +7179,7 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_WIPHY |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+#endif
 	{
 		.cmd = NL80211_CMD_SET_REKEY_OFFLOAD,
 		.doit = nl80211_set_rekey_data,
-- 
cgit v1.2.3


From fc8a7321d3d68af759a369a9ad3e2426688742d3 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 28 Jun 2012 10:33:25 +0200
Subject: mac80211: don't expose ieee80211_add_srates_ie()

This and ieee80211_add_ext_srates_ie() aren't
exported, so can't be used by drivers anyway,
but there's also no reason that they should be
so make them private to mac80211 and use sdata
instead of vif arguments.

Acked-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h     |  6 ------
 net/mac80211/cfg.c         | 12 ++++++------
 net/mac80211/ieee80211_i.h |  4 ++++
 net/mac80211/mesh_plink.c  |  4 ++--
 net/mac80211/tx.c          |  4 ++--
 net/mac80211/util.c        | 10 ++++------
 6 files changed, 18 insertions(+), 22 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 510d852d5222..5e67020b1702 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3826,12 +3826,6 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
 
 void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
 
-int ieee80211_add_srates_ie(struct ieee80211_vif *vif,
-			    struct sk_buff *skb, bool need_basic);
-
-int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif,
-				struct sk_buff *skb, bool need_basic);
-
 /**
  * ieee80211_ave_rssi - report the average rssi for the specified interface
  *
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 7722a7336a58..ebc353ef6902 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2665,8 +2665,8 @@ ieee80211_prep_tdls_encap_data(struct wiphy *wiphy, struct net_device *dev,
 		tf->u.setup_req.capability =
 			cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata));
 
-		ieee80211_add_srates_ie(&sdata->vif, skb, false);
-		ieee80211_add_ext_srates_ie(&sdata->vif, skb, false);
+		ieee80211_add_srates_ie(sdata, skb, false);
+		ieee80211_add_ext_srates_ie(sdata, skb, false);
 		ieee80211_tdls_add_ext_capab(skb);
 		break;
 	case WLAN_TDLS_SETUP_RESPONSE:
@@ -2679,8 +2679,8 @@ ieee80211_prep_tdls_encap_data(struct wiphy *wiphy, struct net_device *dev,
 		tf->u.setup_resp.capability =
 			cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata));
 
-		ieee80211_add_srates_ie(&sdata->vif, skb, false);
-		ieee80211_add_ext_srates_ie(&sdata->vif, skb, false);
+		ieee80211_add_srates_ie(sdata, skb, false);
+		ieee80211_add_ext_srates_ie(sdata, skb, false);
 		ieee80211_tdls_add_ext_capab(skb);
 		break;
 	case WLAN_TDLS_SETUP_CONFIRM:
@@ -2740,8 +2740,8 @@ ieee80211_prep_tdls_direct(struct wiphy *wiphy, struct net_device *dev,
 		mgmt->u.action.u.tdls_discover_resp.capability =
 			cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata));
 
-		ieee80211_add_srates_ie(&sdata->vif, skb, false);
-		ieee80211_add_ext_srates_ie(&sdata->vif, skb, false);
+		ieee80211_add_srates_ie(sdata, skb, false);
+		ieee80211_add_ext_srates_ie(sdata, skb, false);
 		ieee80211_tdls_add_ext_capab(skb);
 		break;
 	default:
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 341d77d472d2..6b7157d20507 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1480,6 +1480,10 @@ u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 			       struct ieee80211_channel *channel,
 			       enum nl80211_channel_type channel_type,
 			       u16 prot_mode);
+int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata,
+			    struct sk_buff *skb, bool need_basic);
+int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
+				struct sk_buff *skb, bool need_basic);
 
 /* channel management */
 enum ieee80211_chan_mode {
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index a1dbd1540276..425685914d7d 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -258,8 +258,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 			pos = skb_put(skb, 2);
 			memcpy(pos + 2, &plid, 2);
 		}
-		if (ieee80211_add_srates_ie(&sdata->vif, skb, true) ||
-		    ieee80211_add_ext_srates_ie(&sdata->vif, skb, true) ||
+		if (ieee80211_add_srates_ie(sdata, skb, true) ||
+		    ieee80211_add_ext_srates_ie(sdata, skb, true) ||
 		    mesh_add_rsn_ie(skb, sdata) ||
 		    mesh_add_meshid_ie(skb, sdata) ||
 		    mesh_add_meshconf_ie(skb, sdata))
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index ec8f53467374..4e753032e48d 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2420,9 +2420,9 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 		*pos++ = WLAN_EID_SSID;
 		*pos++ = 0x0;
 
-		if (ieee80211_add_srates_ie(&sdata->vif, skb, true) ||
+		if (ieee80211_add_srates_ie(sdata, skb, true) ||
 		    mesh_add_ds_params_ie(skb, sdata) ||
-		    ieee80211_add_ext_srates_ie(&sdata->vif, skb, true) ||
+		    ieee80211_add_ext_srates_ie(sdata, skb, true) ||
 		    mesh_add_rsn_ie(skb, sdata) ||
 		    mesh_add_ht_cap_ie(skb, sdata) ||
 		    mesh_add_ht_oper_ie(skb, sdata) ||
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 242ecde381f6..c4245695afc3 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1764,15 +1764,14 @@ ieee80211_ht_oper_to_channel_type(struct ieee80211_ht_operation *ht_oper)
 	return channel_type;
 }
 
-int ieee80211_add_srates_ie(struct ieee80211_vif *vif,
+int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata,
 			    struct sk_buff *skb, bool need_basic)
 {
-	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband;
 	int rate;
 	u8 i, rates, *pos;
-	u32 basic_rates = vif->bss_conf.basic_rates;
+	u32 basic_rates = sdata->vif.bss_conf.basic_rates;
 
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 	rates = sband->n_bitrates;
@@ -1796,15 +1795,14 @@ int ieee80211_add_srates_ie(struct ieee80211_vif *vif,
 	return 0;
 }
 
-int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif,
+int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
 				struct sk_buff *skb, bool need_basic)
 {
-	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband;
 	int rate;
 	u8 i, exrates, *pos;
-	u32 basic_rates = vif->bss_conf.basic_rates;
+	u32 basic_rates = sdata->vif.bss_conf.basic_rates;
 
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 	exrates = sband->n_bitrates;
-- 
cgit v1.2.3


From f823981e288f83113bf1129ff2c94e2fd74a28dd Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Wed, 27 Jun 2012 14:18:22 +0300
Subject: mac80211: flush queues before deauth/disassoc

On deauth/disassoc we tear down all BA sessions. These
DELBA packets are sent on the appropriate TID, while
deauth/disassoc is always sent on VO. This sometimes
ends with the DELBA being sent after the deauth was
already sent.

Fix it by flushing all the pending frames before
sending deauth/disassoc.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mlme.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e11cd0e033ef..c54388b3ebff 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1364,6 +1364,10 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	}
 	mutex_unlock(&local->sta_mtx);
 
+	/* flush out any pending frame (e.g. DELBA) before deauth/disassoc */
+	if (tx)
+		drv_flush(local, false);
+
 	/* deauthenticate/disassociate now */
 	if (tx || frame_buf)
 		ieee80211_send_deauth_disassoc(sdata, bssid, stype, reason,
-- 
cgit v1.2.3


From c9b22fb87a00ceb8afa78089d5cf676cf8b3319d Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 25 Jun 2012 10:48:25 +0300
Subject: mac80211: don't require associated->beacon_ies for ps

beacon_ies is needed only in order to extract the dtim
period. However, even if it's missing we can still enter
ps with dtim=1 (which also happens if the TIM ie is invalid).

Most drivers don't use conf.max_sleep_period/ps_dtim_period
anyway, and this check prevents them from entering ps if
they don't have beacon (but only probe response), even though
the beacon is not needed at all.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mlme.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index c54388b3ebff..398acc4f649d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -902,9 +902,6 @@ static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
 	if (!mgd->associated)
 		return false;
 
-	if (!mgd->associated->beacon_ies)
-		return false;
-
 	if (mgd->flags & (IEEE80211_STA_BEACON_POLL |
 			  IEEE80211_STA_CONNECTION_POLL))
 		return false;
-- 
cgit v1.2.3


From ce0e169529a2db1cd910d2d45a5713fcdc29f6e1 Mon Sep 17 00:00:00 2001
From: Mahesh Palivela <maheshp@posedge.com>
Date: Fri, 22 Jun 2012 07:27:46 +0000
Subject: wireless: add VHT (802.11ac) definitions

Add the VHT definitions to be used by drivers supporting it.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/ieee80211.h | 70 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 318fc1f705b1..abf0e5fe6d24 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1092,6 +1092,73 @@ struct ieee80211_ht_operation {
 #define WLAN_HT_SMPS_CONTROL_STATIC	1
 #define WLAN_HT_SMPS_CONTROL_DYNAMIC	3
 
+#define VHT_MCS_SUPPORTED_SET_SIZE      8
+
+struct ieee80211_vht_capabilities {
+	__le32 vht_capabilities_info;
+	u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE];
+} __packed;
+
+struct ieee80211_vht_operation {
+	u8 vht_op_info_chwidth;
+	u8 vht_op_info_chan_center_freq_seg1_idx;
+	u8 vht_op_info_chan_center_freq_seg2_idx;
+	__le16 vht_basic_mcs_set;
+} __packed;
+
+/**
+ * struct ieee80211_vht_mcs_info - VHT MCS information
+ * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams
+ * @rx_highest: Indicates highest long GI VHT PPDU data rate
+ *	STA can receive. Rate expressed in units of 1 Mbps.
+ *	If this field is 0 this value should not be used to
+ *	consider the highest RX data rate supported.
+ * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams
+ * @tx_highest: Indicates highest long GI VHT PPDU data rate
+ *	STA can transmit. Rate expressed in units of 1 Mbps.
+ *	If this field is 0 this value should not be used to
+ *	consider the highest TX data rate supported.
+ */
+struct ieee80211_vht_mcs_info {
+	__le16 rx_mcs_map;
+	__le16 rx_highest;
+	__le16 tx_mcs_map;
+	__le16 tx_highest;
+} __packed;
+
+#define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0
+#define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1
+#define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT  2
+#define IEEE80211_VHT_MCS_NOT_SUPPORTED 3
+
+/* 802.11ac VHT Capabilities */
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895                0x00000000
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991                0x00000001
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454               0x00000002
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ              0x00000004
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ     0x00000008
+#define IEEE80211_VHT_CAP_RXLDPC                              0x00000010
+#define IEEE80211_VHT_CAP_SHORT_GI_80                         0x00000020
+#define IEEE80211_VHT_CAP_SHORT_GI_160                        0x00000040
+#define IEEE80211_VHT_CAP_TXSTBC                              0x00000080
+#define IEEE80211_VHT_CAP_RXSTBC_1                            0x00000100
+#define IEEE80211_VHT_CAP_RXSTBC_2                            0x00000200
+#define IEEE80211_VHT_CAP_RXSTBC_3                            0x00000300
+#define IEEE80211_VHT_CAP_RXSTBC_4                            0x00000400
+#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE               0x00000800
+#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE               0x00001000
+#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX             0x00006000
+#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX              0x00030000
+#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE               0x00080000
+#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE               0x00100000
+#define IEEE80211_VHT_CAP_VHT_TXOP_PS                         0x00200000
+#define IEEE80211_VHT_CAP_HTC_VHT                             0x00400000
+#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT          0x00800000
+#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB   0x08000000
+#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB     0x0c000000
+#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN                  0x10000000
+#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN                  0x20000000
+
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
@@ -1352,6 +1419,9 @@ enum ieee80211_eid {
 	WLAN_EID_DSE_REGISTERED_LOCATION = 58,
 	WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
 	WLAN_EID_EXT_CHANSWITCH_ANN = 60,
+
+	WLAN_EID_VHT_CAPABILITY = 191,
+	WLAN_EID_VHT_OPERATION = 192,
 };
 
 /* Action category code */
-- 
cgit v1.2.3


From bf0c111ec80355ee9fe2e2bdb609a536b54768d8 Mon Sep 17 00:00:00 2001
From: Mahesh Palivela <maheshp@posedge.com>
Date: Fri, 22 Jun 2012 07:27:46 +0000
Subject: cfg80211: allow advertising VHT capabilities

Allow drivers to advertise their VHT capabilities
and export them to userspace via nl80211.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/nl80211.h |  6 ++++++
 include/net/cfg80211.h  | 17 +++++++++++++++++
 net/wireless/nl80211.c  |  9 +++++++++
 3 files changed, 32 insertions(+)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index c0fc5d277338..23003272c70e 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1813,6 +1813,9 @@ enum nl80211_mpath_info {
  * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
  * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
  * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
+ *	defined in 802.11ac
+ * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
  * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
  * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
  */
@@ -1826,6 +1829,9 @@ enum nl80211_band_attr {
 	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
 	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
 
+	NL80211_BAND_ATTR_VHT_MCS_SET,
+	NL80211_BAND_ATTR_VHT_CAPA,
+
 	/* keep last */
 	__NL80211_BAND_ATTR_AFTER_LAST,
 	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7d3cd3ce9a26..1fc89c4f930c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -210,6 +210,22 @@ struct ieee80211_sta_ht_cap {
 	struct ieee80211_mcs_info mcs;
 };
 
+/**
+ * struct ieee80211_sta_vht_cap - STA's VHT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11ac VHT capabilities for an STA.
+ *
+ * @vht_supported: is VHT supported by the STA
+ * @cap: VHT capabilities map as described in 802.11ac spec
+ * @vht_mcs: Supported VHT MCS rates
+ */
+struct ieee80211_sta_vht_cap {
+	bool vht_supported;
+	u32 cap; /* use IEEE80211_VHT_CAP_ */
+	struct ieee80211_vht_mcs_info vht_mcs;
+};
+
 /**
  * struct ieee80211_supported_band - frequency band definition
  *
@@ -233,6 +249,7 @@ struct ieee80211_supported_band {
 	int n_channels;
 	int n_bitrates;
 	struct ieee80211_sta_ht_cap ht_cap;
+	struct ieee80211_sta_vht_cap vht_cap;
 };
 
 /*
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 067c9fe02a7f..5c4a720f0442 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -921,6 +921,15 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 				dev->wiphy.bands[band]->ht_cap.ampdu_density)))
 			goto nla_put_failure;
 
+		/* add VHT info */
+		if (dev->wiphy.bands[band]->vht_cap.vht_supported &&
+		    (nla_put(msg, NL80211_BAND_ATTR_VHT_MCS_SET,
+			     sizeof(dev->wiphy.bands[band]->vht_cap.vht_mcs),
+			     &dev->wiphy.bands[band]->vht_cap.vht_mcs) ||
+		     nla_put_u32(msg, NL80211_BAND_ATTR_VHT_CAPA,
+				 dev->wiphy.bands[band]->vht_cap.cap)))
+			goto nla_put_failure;
+
 		/* add frequencies */
 		nl_freqs = nla_nest_start(msg, NL80211_BAND_ATTR_FREQS);
 		if (!nl_freqs)
-- 
cgit v1.2.3


From 60771780c27cbc93d0b78da0c7fd7a8a540b029e Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:46:56 +0200
Subject: cfg80211: introduce cfg80211_stop_ap

This functionality will be reused when interface
is going down. Avoids code duplication. Also adds
missing wdev locking.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/Makefile  |  2 +-
 net/wireless/ap.c      | 44 ++++++++++++++++++++++++++++++++++++++++++++
 net/wireless/core.h    |  4 ++++
 net/wireless/nl80211.c | 17 +----------------
 4 files changed, 50 insertions(+), 17 deletions(-)
 create mode 100644 net/wireless/ap.c

diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index 55a28ab21db9..0f7e0d621ab0 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_WEXT_SPY) += wext-spy.o
 obj-$(CONFIG_WEXT_PRIV) += wext-priv.o
 
 cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o
-cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o
+cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o ap.o
 cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
 cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o
 cfg80211-$(CONFIG_CFG80211_INTERNAL_REGDB) += regdb.o
diff --git a/net/wireless/ap.c b/net/wireless/ap.c
new file mode 100644
index 000000000000..45199cca63d5
--- /dev/null
+++ b/net/wireless/ap.c
@@ -0,0 +1,44 @@
+#include <linux/ieee80211.h>
+#include <linux/export.h>
+#include <net/cfg80211.h>
+#include "nl80211.h"
+#include "core.h"
+
+
+static int __cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
+			      struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (!rdev->ops->stop_ap)
+		return -EOPNOTSUPP;
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
+		return -EOPNOTSUPP;
+
+	if (!wdev->beacon_interval)
+		return -ENOENT;
+
+	err = rdev->ops->stop_ap(&rdev->wiphy, dev);
+	if (!err)
+		wdev->beacon_interval = 0;
+
+	return err;
+}
+
+int cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
+		     struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	wdev_lock(wdev);
+	err = __cfg80211_stop_ap(rdev, dev);
+	wdev_unlock(wdev);
+
+	return err;
+}
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 609a579255ac..fef476d2117e 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -289,6 +289,10 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
 			   struct wireless_dev *wdev, int freq,
 			   enum nl80211_channel_type channel_type);
 
+/* AP */
+int cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
+		     struct net_device *dev);
+
 /* MLME */
 int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
 			 struct net_device *dev,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 5c4a720f0442..20d0fd6d1286 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2521,23 +2521,8 @@ static int nl80211_stop_ap(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct net_device *dev = info->user_ptr[1];
-	struct wireless_dev *wdev = dev->ieee80211_ptr;
-	int err;
-
-	if (!rdev->ops->stop_ap)
-		return -EOPNOTSUPP;
 
-	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
-	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
-		return -EOPNOTSUPP;
-
-	if (!wdev->beacon_interval)
-		return -ENOENT;
-
-	err = rdev->ops->stop_ap(&rdev->wiphy, dev);
-	if (!err)
-		wdev->beacon_interval = 0;
-	return err;
+	return cfg80211_stop_ap(rdev, dev);
 }
 
 static const struct nla_policy sta_flags_policy[NL80211_STA_FLAG_MAX + 1] = {
-- 
cgit v1.2.3


From ac800140c20e7ae51117e71289065bedd4930fc2 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:46:57 +0200
Subject: cfg80211: .stop_ap when interface is going down

We'll need this for proper channel tracking (which
is going to be needed for channel context
accounting and finding matching/active interface
combination).

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/core.c | 3 +++
 net/wireless/util.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/net/wireless/core.c b/net/wireless/core.c
index ddd32afa5f0a..c65f59c952c9 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -810,6 +810,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
 		case NL80211_IFTYPE_MESH_POINT:
 			cfg80211_leave_mesh(rdev, dev);
 			break;
+		case NL80211_IFTYPE_AP:
+			cfg80211_stop_ap(rdev, dev);
+			break;
 		default:
 			break;
 		}
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 316cfd00914f..fc948d0a53f3 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -814,6 +814,9 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 		dev->ieee80211_ptr->mesh_id_up_len = 0;
 
 		switch (otype) {
+		case NL80211_IFTYPE_AP:
+			cfg80211_stop_ap(rdev, dev);
+			break;
 		case NL80211_IFTYPE_ADHOC:
 			cfg80211_leave_ibss(rdev, dev, false);
 			break;
-- 
cgit v1.2.3


From f4489ebeffa436c8427a20e2f05004e783708cde Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:46:58 +0200
Subject: cfg80211: add channel tracking for AP and mesh

We need to know which channel is used by a running
AP and mesh for channel context accounting and
finding matching/active interface combination.

STA/IBSS have current_bss already which allows us
to check which channel a vif is tuned to.
Non-fixed channel IBSS can be handled with
additional changes.

Monitor mode is going to be handled differently.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h |  3 +++
 net/wireless/ap.c      |  4 +++-
 net/wireless/mesh.c    | 18 ++++++++++++++----
 net/wireless/mlme.c    |  1 +
 net/wireless/nl80211.c |  1 +
 5 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1fc89c4f930c..c62bc7864adf 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2408,6 +2408,9 @@ struct wireless_dev {
 	struct ieee80211_channel *preset_chan;
 	enum nl80211_channel_type preset_chantype;
 
+	/* for AP and mesh channel tracking */
+	struct ieee80211_channel *channel;
+
 	bool ps;
 	int ps_timeout;
 
diff --git a/net/wireless/ap.c b/net/wireless/ap.c
index 45199cca63d5..fcc60d8dbefa 100644
--- a/net/wireless/ap.c
+++ b/net/wireless/ap.c
@@ -24,8 +24,10 @@ static int __cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
 		return -ENOENT;
 
 	err = rdev->ops->stop_ap(&rdev->wiphy, dev);
-	if (!err)
+	if (!err) {
 		wdev->beacon_interval = 0;
+		wdev->channel = NULL;
+	}
 
 	return err;
 }
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 3b73b07486cf..bab381344723 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -159,6 +159,7 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 	if (!err) {
 		memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
 		wdev->mesh_id_len = setup->mesh_id_len;
+		wdev->channel = setup->channel;
 	}
 
 	return err;
@@ -184,6 +185,7 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
 			   enum nl80211_channel_type channel_type)
 {
 	struct ieee80211_channel *channel;
+	int err;
 
 	channel = rdev_freq_to_chan(rdev, freq, channel_type);
 	if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy,
@@ -205,9 +207,14 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
 
 		if (!netif_running(wdev->netdev))
 			return -ENETDOWN;
-		return rdev->ops->libertas_set_mesh_channel(&rdev->wiphy,
-							    wdev->netdev,
-							    channel);
+
+		err = rdev->ops->libertas_set_mesh_channel(&rdev->wiphy,
+							   wdev->netdev,
+							   channel);
+		if (!err)
+			wdev->channel = channel;
+
+		return err;
 	}
 
 	if (wdev->mesh_id_len)
@@ -249,8 +256,11 @@ static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
 		return -ENOTCONN;
 
 	err = rdev->ops->leave_mesh(&rdev->wiphy, dev);
-	if (!err)
+	if (!err) {
 		wdev->mesh_id_len = 0;
+		wdev->channel = NULL;
+	}
+
 	return err;
 }
 
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index da4406f11929..a7882eb8c46e 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -947,6 +947,7 @@ void cfg80211_ch_switch_notify(struct net_device *dev, int freq,
 	if (WARN_ON(!chan))
 		goto out;
 
+	wdev->channel = chan;
 	nl80211_ch_switch_notify(rdev, dev, freq, type, GFP_KERNEL);
 out:
 	wdev_unlock(wdev);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 20d0fd6d1286..12096b4ebf62 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2488,6 +2488,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		wdev->preset_chan = params.channel;
 		wdev->preset_chantype = params.channel_type;
 		wdev->beacon_interval = params.beacon_interval;
+		wdev->channel = params.channel;
 	}
 	return err;
 }
-- 
cgit v1.2.3


From c30a3d38689bc601e03d5f2ad3c37d8ea13e46ca Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:46:59 +0200
Subject: cfg80211: track ibss fixed channel

IBSS may hop between channels. It is necessary to
account this special case when considering
interface combinations.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h | 2 ++
 net/wireless/ibss.c    | 1 +
 2 files changed, 3 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index c62bc7864adf..e030c6af86dd 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2411,6 +2411,8 @@ struct wireless_dev {
 	/* for AP and mesh channel tracking */
 	struct ieee80211_channel *channel;
 
+	bool ibss_fixed;
+
 	bool ps;
 	int ps_timeout;
 
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index 89baa3328411..b90fd86b2d18 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -113,6 +113,7 @@ int __cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
 		kfree(wdev->connect_keys);
 	wdev->connect_keys = connkeys;
 
+	wdev->ibss_fixed = params->channel_fixed;
 #ifdef CONFIG_CFG80211_WEXT
 	wdev->wext.ibss.channel = params->channel;
 #endif
-- 
cgit v1.2.3


From 26ab9a0c589db9ba2710f042c4959da25fd3297b Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 29 Jun 2012 12:47:00 +0200
Subject: cfg80211: introduce cfg80211_get_chan_state

Helper function for finding out which channel is
used by a given interface.

An exclusive channel can be used only by a single
interface. This is mainly for non-fixed channel
IBSS handling.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/chan.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
 net/wireless/core.h | 12 ++++++++++++
 2 files changed, 63 insertions(+)

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index c1999e45a07c..167e7cb60089 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -92,3 +92,54 @@ int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev,
 
 	return rdev->ops->set_monitor_channel(&rdev->wiphy, chan, chantype);
 }
+
+void
+cfg80211_get_chan_state(struct cfg80211_registered_device *rdev,
+		        struct wireless_dev *wdev,
+		        struct ieee80211_channel **chan,
+		        enum cfg80211_chan_mode *chanmode)
+{
+	*chan = NULL;
+	*chanmode = CHAN_MODE_UNDEFINED;
+
+	ASSERT_RDEV_LOCK(rdev);
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (!netif_running(wdev->netdev))
+		return;
+
+	switch (wdev->iftype) {
+	case NL80211_IFTYPE_ADHOC:
+		if (wdev->current_bss) {
+			*chan = wdev->current_bss->pub.channel;
+			*chanmode = wdev->ibss_fixed
+				  ? CHAN_MODE_SHARED
+				  : CHAN_MODE_EXCLUSIVE;
+			return;
+		}
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_P2P_CLIENT:
+		if (wdev->current_bss) {
+			*chan = wdev->current_bss->pub.channel;
+			*chanmode = CHAN_MODE_SHARED;
+			return;
+		}
+		break;
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_MESH_POINT:
+		*chan = wdev->channel;
+		*chanmode = CHAN_MODE_SHARED;
+		return;
+	case NL80211_IFTYPE_MONITOR:
+	case NL80211_IFTYPE_AP_VLAN:
+	case NL80211_IFTYPE_WDS:
+		/* these interface types don't really have a channel */
+		return;
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NUM_NL80211_IFTYPES:
+		WARN_ON(1);
+	}
+
+	return;
+}
diff --git a/net/wireless/core.h b/net/wireless/core.h
index fef476d2117e..56f18c2eb919 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -241,6 +241,12 @@ struct cfg80211_cached_keys {
 	int def, defmgmt;
 };
 
+enum cfg80211_chan_mode {
+	CHAN_MODE_UNDEFINED,
+	CHAN_MODE_SHARED,
+	CHAN_MODE_EXCLUSIVE,
+};
+
 
 /* free object */
 extern void cfg80211_dev_free(struct cfg80211_registered_device *rdev);
@@ -419,6 +425,12 @@ cfg80211_can_add_interface(struct cfg80211_registered_device *rdev,
 	return cfg80211_can_change_interface(rdev, NULL, iftype);
 }
 
+void
+cfg80211_get_chan_state(struct cfg80211_registered_device *rdev,
+		        struct wireless_dev *wdev,
+		        struct ieee80211_channel **chan,
+		        enum cfg80211_chan_mode *chanmode);
+
 struct ieee80211_channel *
 rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
 		  int freq, enum nl80211_channel_type channel_type);
-- 
cgit v1.2.3


From dbbae26afa81320b3315fb4ad755b20f1ff256b4 Mon S