From 3724ace582d9f675134985727fd5e9811f23c059 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 24 Jun 2019 15:08:55 +0000 Subject: EDAC/mc: Fix grain_bits calculation The grain in EDAC is defined as "minimum granularity for an error report, in bytes". The following calculation of the grain_bits in edac_mc is wrong: grain_bits = fls_long(e->grain) + 1; Where grain_bits is defined as: grain = 1 << grain_bits Example: grain = 8 # 64 bit (8 bytes) grain_bits = fls_long(8) + 1 grain_bits = 4 + 1 = 5 grain = 1 << grain_bits grain = 1 << 5 = 32 Replace it with the correct calculation: grain_bits = fls_long(e->grain - 1); The example gives now: grain_bits = fls_long(8 - 1) grain_bits = fls_long(7) grain_bits = 3 grain = 1 << 3 = 8 Also, check if the hardware reports a reasonable grain != 0 and fallback with a warning to 1 byte granularity otherwise. [ bp: massage a bit. ] Signed-off-by: Robert Richter Signed-off-by: Borislav Petkov Cc: "linux-edac@vger.kernel.org" Cc: James Morse Cc: Mauro Carvalho Chehab Cc: Tony Luck Link: https://lkml.kernel.org/r/20190624150758.6695-2-rrichter@marvell.com --- drivers/edac/edac_mc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 64922c8fa7e3..d899d86897d0 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -1235,9 +1235,13 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type, if (p > e->location) *(p - 1) = '\0'; - /* Report the error via the trace interface */ - grain_bits = fls_long(e->grain) + 1; + /* Sanity-check driver-supplied grain value. */ + if (WARN_ON_ONCE(!e->grain)) + e->grain = 1; + + grain_bits = fls_long(e->grain - 1); + /* Report the error via the trace interface */ if (IS_ENABLED(CONFIG_RAS)) trace_mc_event(type, e->msg, e->label, e->error_count, mci->mc_idx, e->top_layer, e->mid_layer, -- cgit v1.2.3