From 5d0d4b91bf627f14f95167b738d524156c9d440b Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Sun, 13 Nov 2016 13:01:32 +0800 Subject: Revert "bnx2: Reset device during driver initialization" This reverts commit 3e1be7ad2d38c6bd6aeef96df9bd0a7822f4e51c. When people build bnx2 driver into kernel, it will fail to detect and load firmware because firmware is contained in initramfs and initramfs has not been uncompressed yet during do_initcalls. So revert commit 3e1be7a and work out a new way in the later patch. Signed-off-by: Baoquan He Acked-by: Paul Menzel Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index b3791b394715..c55797291b57 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -6361,6 +6361,10 @@ bnx2_open(struct net_device *dev) struct bnx2 *bp = netdev_priv(dev); int rc; + rc = bnx2_request_firmware(bp); + if (rc < 0) + goto out; + netif_carrier_off(dev); bnx2_disable_int(bp); @@ -6429,6 +6433,7 @@ open_err: bnx2_free_irq(bp); bnx2_free_mem(bp); bnx2_del_napi(bp); + bnx2_release_firmware(bp); goto out; } @@ -8575,12 +8580,6 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); - rc = bnx2_request_firmware(bp); - if (rc < 0) - goto error; - - - bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET); memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN); dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | @@ -8613,7 +8612,6 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; error: - bnx2_release_firmware(bp); pci_iounmap(pdev, bp->regview); pci_release_regions(pdev); pci_disable_device(pdev); -- cgit v1.2.3 From 6df77862f63f389df3b1ad879738e04440d7385d Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Sun, 13 Nov 2016 13:01:33 +0800 Subject: bnx2: Wait for in-flight DMA to complete at probe stage In-flight DMA from 1st kernel could continue going in kdump kernel. New io-page table has been created before bnx2 does reset at open stage. We have to wait for the in-flight DMA to complete to avoid it look up into the newly created io-page table at probe stage. Suggested-by: Michael Chan Signed-off-by: Baoquan He Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2.c | 38 ++++++++++++++++++++++++++++++------ 1 file changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index c55797291b57..1f7034d739b0 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -49,6 +49,7 @@ #include #include #include +#include #if IS_ENABLED(CONFIG_CNIC) #define BCM_CNIC 1 @@ -4764,15 +4765,16 @@ bnx2_setup_msix_tbl(struct bnx2 *bp) BNX2_WR(bp, BNX2_PCI_GRC_WINDOW3_ADDR, BNX2_MSIX_PBA_ADDR); } -static int -bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) +static void +bnx2_wait_dma_complete(struct bnx2 *bp) { u32 val; - int i, rc = 0; - u8 old_port; + int i; - /* Wait for the current PCI transaction to complete before - * issuing a reset. */ + /* + * Wait for the current PCI transaction to complete before + * issuing a reset. + */ if ((BNX2_CHIP(bp) == BNX2_CHIP_5706) || (BNX2_CHIP(bp) == BNX2_CHIP_5708)) { BNX2_WR(bp, BNX2_MISC_ENABLE_CLR_BITS, @@ -4796,6 +4798,21 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) } } + return; +} + + +static int +bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) +{ + u32 val; + int i, rc = 0; + u8 old_port; + + /* Wait for the current PCI transaction to complete before + * issuing a reset. */ + bnx2_wait_dma_complete(bp); + /* Wait for the firmware to tell us it is ok to issue a reset. */ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1, 1); @@ -8580,6 +8597,15 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); + /* + * In-flight DMA from 1st kernel could continue going in kdump kernel. + * New io-page table has been created before bnx2 does reset at open stage. + * We have to wait for the in-flight DMA to complete to avoid it look up + * into the newly created io-page table. + */ + if (is_kdump_kernel()) + bnx2_wait_dma_complete(bp); + memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN); dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | -- cgit v1.2.3