| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"Quite a new features are included this time.
First off, the Collaborative Processor Performance Control interface
(version 2) defined by ACPI will now be supported on ARM64 along with
a cpufreq frontend for CPU performance scaling.
Second, ACPI gets a new infrastructure for the early probing of IRQ
chips and clock sources (along the lines of the existing similar
mechanism for DT).
Next, the ACPI core and the generic device properties API will now
support a recently introduced hierarchical properties extension of the
_DSD (Device Specific Data) ACPI device configuration object. If the
ACPI platform firmware uses that extension to organize device
properties in a hierarchical way, the kernel will automatically handle
it and make those properties available to device drivers via the
generic device properties API.
It also will be possible to build the ACPICA's AML interpreter
debugger into the kernel now and use that to diagnose AML-related
problems more efficiently. In the future, this should make it
possible to single-step AML execution and do similar things.
Interesting stuff, although somewhat experimental at this point.
Finally, the PM core gets a new mechanism that can be used by device
drivers to distinguish between suspend-to-RAM (based on platform
firmware support) and suspend-to-idle (or other variants of system
suspend the platform firmware is not involved in) and possibly
optimize their device suspend/resume handling accordingly.
In addition to that, some existing features are re-organized quite
substantially.
First, the ACPI-based handling of PCI host bridges on x86 and ia64 is
unified and the common code goes into the ACPI core (so as to reduce
code duplication and eliminate non-essential differences between the
two architectures in that area).
Second, the Operating Performance Points (OPP) framework is
reorganized to make the code easier to find and follow.
Next, the cpufreq core's sysfs interface is reorganized to get rid of
the "primary CPU" concept for configurations in which the same
performance scaling settings are shared between multiple CPUs.
Finally, some interfaces that aren't necessary any more are dropped
from the generic power domains framework.
On top of the above we have some minor extensions, cleanups and bug
fixes in multiple places, as usual.
Specifics:
- ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng).
The most significant change is to allow the AML debugger to be
built into the kernel. On top of that there is an update related
to the NFIT table (the ACPI persistent memory interface) and a few
fixes and cleanups.
- ACPI CPPC2 (Collaborative Processor Performance Control v2) support
along with a cpufreq frontend (Ashwin Chaugule).
This can only be enabled on ARM64 at this point.
- New ACPI infrastructure for the early probing of IRQ chips and
clock sources (Marc Zyngier).
- Support for a new hierarchical properties extension of the ACPI
_DSD (Device Specific Data) device configuration object allowing
the kernel to handle hierarchical properties (provided by the
platform firmware this way) automatically and make them available
to device drivers via the generic device properties interface
(Rafael Wysocki).
- Generic device properties API extension to obtain an index of
certain string value in an array of strings, along the lines of
of_property_match_string(), but working for all of the supported
firmware node types, and support for the "dma-names" device
property based on it (Mika Westerberg).
- ACPI core fix to parse the MADT (Multiple APIC Description Table)
entries in the order expected by platform firmware (and mandated by
the specification) to avoid confusion on systems with more than 255
logical CPUs (Lukasz Anaczkowski).
- Consolidation of the ACPI-based handling of PCI host bridges on x86
and ia64 (Jiang Liu).
- ACPI core fixes to ensure that the correct IRQ number is used to
represent the SCI (System Control Interrupt) in the cases when it
has been re-mapped (Chen Yu).
- New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede).
- ACPI EC driver fixes (Lv Zheng).
- Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri
Kosina, Rami Rosen, Rasmus Villemoes).
- New mechanism in the PM core allowing drivers to check if the
platform firmware is going to be involved in the upcoming system
suspend or if it has been involved in the suspend the system is
resuming from at the moment (Rafael Wysocki).
This should allow drivers to optimize their suspend/resume handling
in some cases and the changes include a couple of users of it (the
i8042 input driver, PCI PM).
- PCI PM fix to prevent runtime-suspended devices with PME enabled
from being resumed during system suspend even if they aren't
configured to wake up the system from sleep (Rafael Wysocki).
- New mechanism to report the number of a wakeup IRQ that woke up the
system from sleep last time (Alexandra Yates).
- Removal of unused interfaces from the generic power domains
framework and fixes related to latency measurements in that code
(Ulf Hansson, Daniel Lezcano).
- cpufreq core sysfs interface rework to make it handle CPUs that
share performance scaling settings (represented by a common cpufreq
policy object) more symmetrically (Viresh Kumar).
This should help to simplify the CPU offline/online handling among
other things.
- cpufreq core fixes and cleanups (Viresh Kumar).
- intel_pstate fixes related to the Turbo Activation Ratio (TAR)
mechanism on client platforms which causes the turbo P-states range
to vary depending on platform firmware settings (Srinivas
Pandruvada).
- intel_pstate sysfs interface fix (Prarit Bhargava).
- Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes
and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G
Bhat, Luis de Bethencourt).
- cpuidle mvebu driver cleanups (Russell King).
- OPP (Operating Performance Points) framework code reorganization to
make it more maintainable (Viresh Kumar).
- Intel Broxton support for the RAPL (Running Average Power Limits)
power capping driver (Amy Wiles).
- Assorted power management code fixes and cleanups (Dan Carpenter,
Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus
Villemoes)"
* tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits)
cpufreq: postfix policy directory with the first CPU in related_cpus
cpufreq: create cpu/cpufreq/policyX directories
cpufreq: remove cpufreq_sysfs_{create|remove}_file()
cpufreq: create cpu/cpufreq at boot time
cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask
cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate()
PM / Domains: Merge measurements for PM QoS device latencies
PM / Domains: Don't measure ->start|stop() latency in system PM callbacks
PM / clk: Fix broken build due to non-matching code and header #ifdefs
ACPI / Documentation: add copy_dsdt to ACPI format options
ACPI / sysfs: correctly check failing memory allocation
ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405
ACPI / CPPC: Fix potential memory leak
ACPI / CPPC: signedness bug in register_pcc_channel()
ACPI / PAD: power_saving_thread() is not freezable
ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle
ACPI: Using correct irq when waiting for events
ACPI: Use correct IRQ when uninstalling ACPI interrupt handler
cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver
cpuidle: mvebu: clean up multiple platform drivers
...
|
|
Pull networking updates from David Miller:
Changes of note:
1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.
2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
David Ahern.
3) Allow the user to ask for the statistics to be filtered out of
ipv4/ipv6 address netlink dumps. From Sowmini Varadhan.
4) More work to pass the network namespace context around deep into
various packet path APIs, starting with the netfilter hooks. From
Eric W Biederman.
5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
Richter.
6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.
7) Support Very High Throughput in wireless MESH code, from Bob
Copeland.
8) Allow setting the ageing_time in switchdev/rocker. From Scott
Feldman.
9) Properly autoload L2TP type modules, from Stephen Hemminger.
10) Fix and enable offload features by default in 8139cp driver, from
David Woodhouse.
11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
Jiri Benc.
12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
Opstad.
13) Fix IPSEC flowcache overflows on large systems, from Steffen
Klassert.
14) Convert bridging to track VLANs using rhashtable entries rather than
a bitmap. From Nikolay Aleksandrov.
15) Make TCP listener handling completely lockless, this is a major
accomplishment. Incoming request sockets now live in the
established hash table just like any other socket too.
From Eric Dumazet.
15) Provide more bridging attributes to netlink, from Nikolay
Aleksandrov.
16) Use hash based algorithm for ipv4 multipath routing, this was very
long overdue. From Peter Nørlund.
17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann.
18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.
19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This
influences the port binding selection logic used by SO_REUSEPORT.
20) Add ipv6 support to VRF, from David Ahern.
21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.
22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.
23) Implement RACK loss recovery in TCP, from Yuchung Cheng.
24) Support multipath routes in MPLS, from Roopa Prabhu.
25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
Dumazet.
26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
Sudarsana Kalluru.
27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
Sowa.
28) Support ipv6 geneve tunnels, from John W Linville.
29) Add flood control support to switchdev layer, from Ido Schimmel.
30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
Hannes Frederic Sowa.
31) Support persistent maps and progs in bpf, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
sh_eth: use DMA barriers
switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
net: sched: kill dead code in sch_choke.c
irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
net: dsa: mv88e6xxx: include DSA ports in VLANs
net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
net/core: fix for_each_netdev_feature
vlan: Invoke driver vlan hooks only if device is present
arcnet/com20020: add LEDS_CLASS dependency
bpf, verifier: annotate verbose printer with __printf
dp83640: Only wait for timestamps for packets with timestamping enabled.
ptp: Change ptp_class to a proper bitmask
dp83640: Prune rx timestamp list before reading from it
dp83640: Delay scheduled work.
dp83640: Include hash in timestamp/packet matching
ipv6: fix tunnel error handling
net/mlx5e: Fix LSO vlan insertion
net/mlx5e: Re-eanble client vlan TX acceleration
net/mlx5e: Return error in case mlx5e_set_features() fails
net/mlx5e: Don't allow more than max supported channels
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu changes from Ingo Molnar:
"There are two main areas of changes:
- Rework of the extended FPU state code to robustify the kernel's
usage of cpuid provided xstate sizes - and related changes (Dave
Hansen)"
- math emulation enhancements: new modern FPU instructions support,
with testcases, plus cleanups (Denys Vlasnko)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/fpu: Fixup uninitialized feature_name warning
x86/fpu/math-emu: Add support for FISTTP instructions
x86/fpu/math-emu, selftests: Add test for FISTTP instructions
x86/fpu/math-emu: Add support for FCMOVcc insns
x86/fpu/math-emu: Add support for F[U]COMI[P] insns
x86/fpu/math-emu: Remove define layer for undocumented opcodes
x86/fpu/math-emu, selftests: Add tests for FCMOV and FCOMI insns
x86/fpu/math-emu: Remove !NO_UNDOC_CODE
x86/fpu: Check CPU-provided sizes against struct declarations
x86/fpu: Check to ensure increasing-offset xstate offsets
x86/fpu: Correct and check XSAVE xstate size calculations
x86/fpu: Add C structures for AVX-512 state components
x86/fpu: Rework YMM definition
x86/fpu/mpx: Rework MPX 'xstate' types
x86/fpu: Add xfeature_enabled() helper instead of test_bit()
x86/fpu: Remove 'xfeature_nr'
x86/fpu: Rework XSTATE_* macros to remove magic '2'
x86/fpu: Rename XFEATURES_NR_MAX
x86/fpu: Rename XSAVE macros
x86/fpu: Remove partial LWP support definitions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm changes from Ingo Molnar:
"The main change in this cycle is another step in the big x86 system
call interface rework by Andy Lutomirski, which moves most of the low
level x86 entry code from assembly to C, for all syscall entries
except native 64-bit system calls:
arch/x86/entry/entry_32.S | 182 ++++------
arch/x86/entry/entry_64_compat.S | 547 ++++++++-----------------------
194 insertions(+), 535 deletions(-)
... our hope is that the final remaining step (converting native
64-bit system calls) will be less painful as all the previous steps,
given that most of the legacies and quirks are concentrated around
native 32-bit and compat environments"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/entry/32: Fix FS and GS restore in opportunistic SYSEXIT
x86/entry/32: Fix entry_INT80_32() to expect interrupts to be on
um/x86: Fix build after x86 syscall changes
x86/asm: Remove the xyz_cfi macros from dwarf2.h
selftests/x86: Style fixes for the 'unwind_vdso' test
x86/entry/64/compat: Document sysenter_fix_flags's reason for existence
x86/entry: Split and inline syscall_return_slowpath()
x86/entry: Split and inline prepare_exit_to_usermode()
x86/entry: Use pt_regs_to_thread_info() in syscall entry tracing
x86/entry: Hide two syscall entry assertions behind CONFIG_DEBUG_ENTRY
x86/entry: Micro-optimize compat fast syscall arg fetch
x86/entry: Force inlining of 32-bit syscall code
x86/entry: Make irqs_disabled checks in exit code depend on lockdep
x86/entry: Remove unnecessary IRQ twiddling in fast 32-bit syscalls
x86/asm: Remove thread_info.sysenter_return
x86/entry/32: Re-implement SYSENTER using the new C path
x86/entry/32: Switch INT80 to the new C syscall path
x86/entry/32: Open-code return tracking from fork and kthreads
x86/entry/compat: Implement opportunistic SYSRETL for compat syscalls
x86/vdso/compat: Wire up SYSENTER and SYSCSALL for compat userspace
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Improve accuracy of perf/sched clock on x86. (Adrian Hunter)
- Intel DS and BTS updates. (Alexander Shishkin)
- Intel cstate PMU support. (Kan Liang)
- Add group read support to perf_event_read(). (Peter Zijlstra)
- Branch call hardware sampling support, implemented on x86 and
PowerPC. (Stephane Eranian)
- Event groups transactional interface enhancements. (Sukadev
Bhattiprolu)
- Enable proper x86/intel/uncore PMU support on multi-segment PCI
systems. (Taku Izumi)
- ... misc fixes and cleanups.
The perf tooling team was very busy again with 200+ commits, the full
diff doesn't fit into lkml size limits. Here's an (incomplete) list
of the tooling highlights:
New features:
- Change the default event used in all tools (record/top): use the
most precise "cycles" hw counter available, i.e. when the user
doesn't specify any event, it will try using cycles:ppp, cycles:pp,
etc and fall back transparently until it finds a working counter.
(Arnaldo Carvalho de Melo)
- Integration of perf with eBPF that, given an eBPF .c source file
(or .o file built for the 'bpf' target with clang), will get it
automatically built, validated and loaded into the kernel via the
sys_bpf syscall, which can then be used and seen using 'perf trace'
and other tools.
(Wang Nan)
Various user interface improvements:
- Automatic pager invocation on long help output. (Namhyung Kim)
- Search for more options when passing args to -h, e.g.: (Arnaldo
Carvalho de Melo)
$ perf report -h interface
Usage: perf report [<options>]
--gtk Use the GTK2 interface
--stdio Use the stdio interface
--tui Use the TUI interface
- Show ordered command line options when -h is used or when an
unknown option is specified. (Arnaldo Carvalho de Melo)
- If options are passed after -h, show just its descriptions, not all
options. (Arnaldo Carvalho de Melo)
- Implement column based horizontal scrolling in the hists browser
(top, report), making it possible to use the TUI for things like
'perf mem report' where there are many more columns than can fit in
a terminal. (Arnaldo Carvalho de Melo)
- Enhance the error reporting of tracepoint event parsing, e.g.:
$ oldperf record -e sched:sched_switc usleep 1
event syntax error: 'sched:sched_switc'
\___ unknown tracepoint
Run 'perf list' for a list of valid events
Now we get the much nicer:
$ perf record -e sched:sched_switc ls
event syntax error: 'sched:sched_switc'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_switc
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
And after we have those mount point permissions fixed:
$ perf record -e sched:sched_switc ls
event syntax error: 'sched:sched_switc'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sched/sched_switc not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
I.e. basically now the event parsing routing uses the strerror_open()
routines introduced by and used in 'perf trace' work. (Jiri Olsa)
- Fail properly when pattern matching fails to find a tracepoint,
i.e. '-e non:existent' was being correctly handled, with a proper
error message about that not being a valid event, but '-e
non:existent*' wasn't, fix it. (Jiri Olsa)
- Do event name substring search as last resort in 'perf list'.
(Arnaldo Carvalho de Melo)
E.g.:
# perf list clock
List of pre-defined events (to be used in -e):
cpu-clock [Software event]
task-clock [Software event]
uncore_cbox_0/clockticks/ [Kernel PMU event]
uncore_cbox_1/clockticks/ [Kernel PMU event]
kvm:kvm_pvclock_update [Tracepoint event]
kvm:kvm_update_master_clock [Tracepoint event]
power:clock_disable [Tracepoint event]
power:clock_enable [Tracepoint event]
power:clock_set_rate [Tracepoint event]
syscalls:sys_enter_clock_adjtime [Tracepoint event]
syscalls:sys_enter_clock_getres [Tracepoint event]
syscalls:sys_enter_clock_gettime [Tracepoint event]
syscalls:sys_enter_clock_nanosleep [Tracepoint event]
syscalls:sys_enter_clock_settime [Tracepoint event]
syscalls:sys_exit_clock_adjtime [Tracepoint event]
syscalls:sys_exit_clock_getres [Tracepoint event]
syscalls:sys_exit_clock_gettime [Tracepoint event]
syscalls:sys_exit_clock_nanosleep [Tracepoint event]
syscalls:sys_exit_clock_settime [Tracepoint event]
Intel PT hardware tracing enhancements:
- Accept a zero --itrace period, meaning "as often as possible". In
the case of Intel PT that is the same as a period of 1 and a unit
of 'instructions' (i.e. --itrace=i1i). (Adrian Hunter)
- Harmonize itrace's synthesized callchains with the existing
--max-stack tool option. (Adrian Hunter)
- Allow time to be displayed in nanoseconds in 'perf script'.
(Adrian Hunter)
- Fix potential infinite loop when handling Intel PT timestamps.
(Adrian Hunter)
- Slighly improve Intel PT debug logging. (Adrian Hunter)
- Warn when AUX data has been lost, just like when processing
PERF_RECORD_LOST. (Adrian Hunter)
- Further document export-to-postgresql.py script. (Adrian Hunter)
- Add option to synthesize branch stack from auxtrace data. (Adrian
Hunter)
Misc notable changes:
- Switch the default callchain output mode to 'graph,0.5,caller', to
make it look like the default for other tools, reducing the
learning curve for people used to 'caller' based viewing. (Arnaldo
Carvalho de Melo)
- various call chain usability enhancements. (Namhyung Kim)
- Introduce the 'P' event modifier, meaning 'max precision level,
please', i.e.:
$ perf record -e cycles:P usleep 1
Is now similar to:
$ perf record usleep 1
Useful, for instance, when specifying multiple events. (Jiri Olsa)
- Add 'socket' sort entry, to sort by the processor socket in 'perf
top' and 'perf report'. (Kan Liang)
- Introduce --socket-filter to 'perf report', for filtering by
processor socket. (Kan Liang)
- Add new "Zoom into Processor Socket" operation in the perf hists
browser, used in 'perf top' and 'perf report'. (Kan Liang)
- Allow probing on kmodules without DWARF. (Masami Hiramatsu)
- Fix 'perf probe -l' for probes added to kernel module functions.
(Masami Hiramatsu)
- Preparatory work for the 'perf stat record' feature that will allow
generating perf.data files with counting data in addition to the
sampling mode we have now (Jiri Olsa)
- Update libtraceevent KVM plugin. (Paolo Bonzini)
- ... plus lots of other enhancements that I failed to list properly,
by: Adrian Hunter, Alexander Shishkin, Andi Kleen, Andrzej Hajda,
Arnaldo Carvalho de Melo, Dima Kogan, Don Zickus, Geliang Tang, He
Kuang, Huaitong Han, Ingo Molnar, Jan Stancek, Jiri Olsa, Kan
Liang, Kirill Tkhai, Masami Hiramatsu, Matt Fleming, Namhyung Kim,
Paolo Bonzini, Peter Zijlstra, Rabin Vincent, Scott Wood, Stephane
Eranian, Sukadev Bhattiprolu, Taku Izumi, Vaishali Thakkar, Wang
Nan, Yang Shi and Yunlong Song"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (260 commits)
perf unwind: Pass symbol source to libunwind
tools build: Fix libiberty feature detection
perf tools: Compile scriptlets to BPF objects when passing '.c' to --event
perf record: Add clang options for compiling BPF scripts
perf bpf: Attach eBPF filter to perf event
perf tools: Make sure fixdep is built before libbpf
perf script: Enable printing of branch stack
perf trace: Add cmd string table to decode sys_bpf first arg
perf bpf: Collect perf_evsel in BPF object files
perf tools: Load eBPF object into kernel
perf tools: Create probe points for BPF programs
perf tools: Enable passing bpf object file to --event
perf ebpf: Add the libbpf glue
perf tools: Make perf depend on libbpf
perf symbols: Fix endless loop in dso__split_kallsyms_for_kcore
perf tools: Enable pre-event inherit setting by config terms
perf symbols: we can now read separate debug-info files based on a build ID
perf symbols: Fix type error when reading a build-id
perf tools: Search for more options when passing args to -h
perf stat: Cache aggregated map entries in extra cpumap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
"The main changes in this cycle were:
- Improvements to expedited grace periods (Paul E McKenney)
- Performance improvements to and locktorture tests for percpu-rwsem
(Oleg Nesterov, Paul E McKenney)
- Torture-test changes (Paul E McKenney, Davidlohr Bueso)
- Documentation updates (Paul E McKenney)
- Miscellaneous fixes (Paul E McKenney, Boqun Feng, Oleg Nesterov,
Patrick Marlier)"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
fs/writeback, rcu: Don't use list_entry_rcu() for pointer offsetting in bdi_split_work_to_wbs()
rcu: Better hotplug handling for synchronize_sched_expedited()
rcu: Enable stall warnings for synchronize_rcu_expedited()
rcu: Add tasks to expedited stall-warning messages
rcu: Add online/offline info to expedited stall warning message
rcu: Consolidate expedited CPU selection
rcu: Prepare for consolidating expedited CPU selection
cpu: Remove try_get_online_cpus()
rcu: Stop excluding CPU hotplug in synchronize_sched_expedited()
rcu: Stop silencing lockdep false positive for expedited grace periods
rcu: Switch synchronize_sched_expedited() to IPI
locktorture: Fix module unwind when bad torture_type specified
torture: Forgive non-plural arguments
rcutorture: Fix unused-function warning for torturing_tasks()
rcutorture: Fix module unwind when bad torture_type specified
rcu_sync: Cleanup the CONFIG_PROVE_RCU checks
locking/percpu-rwsem: Clean up the lockdep annotations in percpu_down_read()
locking/percpu-rwsem: Fix the comments outdated by rcu_sync
locking/percpu-rwsem: Make use of the rcu_sync infrastructure
locking/percpu-rwsem: Make percpu_free_rwsem() after kzalloc() safe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timer departement provides:
- More y2038 work in the area of ntp and pps.
- Optimization of posix cpu timers
- New time related selftests
- Some new clocksource drivers
- The usual pile of fixes, cleanups and improvements"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
timeconst: Update path in comment
timers/x86/hpet: Type adjustments
clocksource/drivers/armada-370-xp: Implement ARM delay timer
clocksource/drivers/tango_xtal: Add new timer for Tango SoCs
clocksource/drivers/imx: Allow timer irq affinity change
clocksource/drivers/exynos_mct: Use container_of() instead of this_cpu_ptr()
clocksource/drivers/h8300_*: Remove unneeded memset()s
clocksource/drivers/sh_cmt: Remove unneeded memset() in sh_cmt_setup()
clocksource/drivers/em_sti: Remove unneeded memset()s
clocksource/drivers/mediatek: Use GPT as sched clock source
clockevents/drivers/mtk: Fix spurious interrupt leading to crash
posix_cpu_timer: Reduce unnecessary sighand lock contention
posix_cpu_timer: Convert cputimer->running to bool
posix_cpu_timer: Check thread timers only when there are active thread timers
posix_cpu_timer: Optimize fastpath_timer_check()
timers, kselftest: Add 'adjtick' test to validate adjtimex() tick adjustments
timers: Use __fls in apply_slack()
clocksource: Remove return statement from void functions
net: sfc: avoid using timespec
ntp/pps: use y2038 safe types in pps_event_time
...
|
|
* acpica:
ACPICA: Update version to 20150930
ACPICA: Debugger: Fix dead lock issue ocurred in single stepping mode
ACPI: Enable build of AML interpreter debugger
ACPICA: Debugger: Add thread ID support so that single step mode can only apply to the debugger thread
ACPICA: Debugger: Fix "terminate" command by cleaning up subsystem shutdown logic
ACPICA: Debugger: Fix "quit/exit" command by cleaning up user commands termination logic
ACPICA: Linuxize: Export debugger files to Linux
ACPICA: iASL: General cleanup of the file suffix #defines
ACPICA: Improve typechecking, both compile-time and runtime
ACPICA: Update NFIT table to rename a flags field
ACPICA: Debugger: Update mutexes used for multithreaded debugger
ACPICA: Update exception code for "file not found" error
ACPICA: iASL: Add symbolic operator support for Index() operator
ACPICA: Remove unnecessary conditional compilation
|
|
Mere possession of vm86 state is strange. Make sure that nothing
gets corrupted if we fork after calling vm86().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Stas Sergeev <stsp@list.ru>
Link: http://lkml.kernel.org/r/08f83295460a80e41dc5e3e81ec40d6844d316f5.1446270067.git.luto@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Even if --symfs is used to point to the debug binaries, we send in the
non-debug filenames to libunwind, which leads to libunwind not finding
the debug frame. Fix this by preferring the file in --symfs, if it is
available.
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1446104978-26429-1-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Any CFLAGS or LDFLAGS set by the user need to be passed to the feature
build command. This many include for example -I or -L to point to
libraries and include files in custom paths.
In most of the test-*.bin rules in build/feature/Makefile, we use the BUILD
macro which always sends in CFLAGS and LDFLAGS. The libiberty build line
however doesn't use the BUILD macro and thus needs to send in CFLAGS and
LDFLAGS explicitly. Without this, when using custom CFLAGS/LDFLAGS, libiberty
fails to be detected and the perf link fails with something like:
LINK perf
libbfd.a(bfd.o): In function `bfd_errmsg':
bfd.c:(.text+0x168): undefined reference to `xstrerror'
bbfd.a(opncls.o): In function `_bfd_new_bfd':
opncls.c:(.text+0xe8): undefined reference to `objalloc_create'
...
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1446104978-26429-2-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch provides infrastructure for passing source files to --event
directly using:
# perf record --event bpf-file.c command
This patch does following works:
1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is
expanded to allow caller tell it whether the passed file is source
file or object.
2) llvm__compile_bpf() is called to compile the '.c' file, the result
is saved into memory. Use bpf_object__open_buffer() to load the
in-memory object.
Introduces a bpf-script-example.c so we can manually test it:
# perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1
Note that '--clang-opt' must put before '--event'.
Futher patches will merge it into a testcase so can be tested automatically.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Although previous patch allows setting BPF compiler related options in
perfconfig, on some ad-hoc situation it still requires passing options
through cmdline. This patch introduces 2 options to 'perf record' for
this propose: --clang-path and --clang-opt.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-9-git-send-email-wangnan0@huawei.com
[ Add the new options to the 'record' man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is the final patch which makes basic BPF filter work. After
applying this patch, users are allowed to use BPF filter like:
# perf record --event ./hello_world.o ls
A bpf_fd field is appended to 'struct evsel', and setup during the
callback function add_bpf_event() for each 'probe_trace_event'.
PERF_EVENT_IOC_SET_BPF ioctl is used to attach eBPF program to a newly
created perf event. The file descriptor of the eBPF program is passed to
perf record using previous patches, and stored into evsel->bpf_fd.
It is possible that different perf event are created for one kprobe
events for different CPUs. In this case, when trying to call the ioctl,
EEXIST will be return. This patch doesn't treat it as an error.
Committer note:
The bpf proggie used so far:
__attribute__((section("fork=_do_fork"), used))
int fork(void *ctx)
{
return 0;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
failed to produce any samples, even with forks happening and it being
running in system wide mode.
That is because now the filter is being associated, and the code above
always returns zero, meaning that all forks will be probed but filtered
away ;-/
Change it to 'return 1;' instead and after that:
# trace --no-syscalls --event /tmp/foo.o
0.000 perf_bpf_probe:fork:(ffffffff8109be30))
2.333 perf_bpf_probe:fork:(ffffffff8109be30))
3.725 perf_bpf_probe:fork:(ffffffff8109be30))
4.550 perf_bpf_probe:fork:(ffffffff8109be30))
^C#
And it works with all tools, including 'perf trace'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While doing 'make -C tools/perf build-test':
LD fixdep-in.o
LINK fixdep
/bin/sh: /home/acme/git/linux/tools/build/fixdep: Permission denied
make[6]: *** [bpf.o] Error 1
make[5]: *** [libbpf-in.o] Error 2
make[4]: *** [/home/acme/git/linux/tools/lib/bpf/libbpf.a] Error 2
make[4]: *** Waiting for unfinished jobs....
The fixdep tool needs to be built as the first binary. Libraries are
built in paralel, so each of them needs to depend on fixdep target.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151028204450.GA25553@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch improves perf script by enabling printing of the
branch stack via the 'brstack' and 'brstacksym' arguments to
the field selection option -F. The option is off by default
and operates only if the perf.data file has branch stack content.
The branches are printed in to/from pairs. The most recent branch
is printed first. The number of branch entries vary based on the
underlying hardware and filtering used.
The brstack prints FROM/TO addresses in raw hexadecimal format.
The brstacksym prints FROM/TO addresses in symbolic form wherever
possible.
$ perf script -F ip,brstack
5d3000 0x401aa0/0x5d2000/M/-/-/-/0 ...
$ perf script -F ip,brstacksym
4011e0 noploop+0x0/noploop+0x0/P/-/-/0
The notation F/T/M/X/A/C describes the attributes of the branch.
F=from, T=to, M/P=misprediction/prediction, X=TSX, A=TSX abort, C=cycles (SKL)
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yuanfang Chen <cyfmxc@gmail.com>
Link: http://lkml.kernel.org/r/1441039273-16260-5-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
# perf trace -e bpf perf record -e /tmp/foo.o -a
362.779 (0.130 ms): perf/3451 bpf(cmd: PROG_LOAD, uattr: 0x7ffe9a6825d0, size: 48) = 3
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2b0nknu53baz9e0wj4thcdd8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch utilizes bpf_object__load() provided by libbpf to load all
objects into kernel.
Committer notes:
Testing it:
When using an incorrect kernel version number, i.e., having this in your
eBPF proggie:
int _version __attribute__((section("version"), used)) = 0x40100;
For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event
parsing time, to provide a better error report to the user:
# perf record --event /tmp/foo.o sleep 1
libbpf: load bpf program failed: Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
libbpf: -- END LOG --
libbpf: failed to load program 'fork=_do_fork'
libbpf: failed to load object '/tmp/foo.o'
event syntax error: '/tmp/foo.o'
\___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+
kernel, the whole process goes thru:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.202 MB perf.data ]
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch introduces bpf__{un,}probe() functions to enable callers to
create kprobe points based on section names a BPF program. It parses the
section names in the program and creates corresponding 'struct
perf_probe_event' structures. The parse_perf_probe_command() function is
used to do the main parsing work. The resuling 'struct perf_probe_event'
is stored into program private data for further using.
By utilizing the new probing API, this patch creates probe points during
event parsing.
To ensure probe points be removed correctly, register an atexit hook so
even perf quit through exit() bpf__clear() is still called, so probing
points are cleared. Note that bpf_clear() should be registered before
bpf__probe() is called, so failure of bpf__probe() can still trigger
bpf__clear() to remove probe points which are already probed.
strerror style error reporting scaffold is created by this patch.
bpf__strerror_probe() is the first error reporting function in
bpf-loader.c.
Committer note:
Trying it:
To build a test eBPF object file:
I am testing using a script I built from the 'perf test -v LLVM' output:
$ cat ~/bin/hello-ebpf
export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h"
export WORKING_DIR=/lib/modules/4.2.0/build
export CLANG_SOURCE=-
export CLANG_OPTIONS=-xc
OBJ=/tmp/foo.o
rm -f $OBJ
echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \
clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ
---
First asking to put a probe in a function not present in the kernel
(misses the initial _):
$ perf record --event /tmp/foo.o sleep 1
Probe point 'do_fork' not found.
event syntax error: '/tmp/foo.o'
\___ You need to check probing points in BPF file
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
---
Now, with "__attribute__((section("fork=_do_fork"), used)):
$ grep _do_fork /proc/kallsyms
ffffffff81099ab0 T _do_fork
$ perf record --event /tmp/foo.o sleep 1
Failed to open kprobe_events: Permission denied
event syntax error: '/tmp/foo.o'
\___ Permission denied
---
Cool, we need to provide some better hints, "kprobe_events" is too low
level, one doesn't strictly need to know the precise details of how
these things are put in place, so something that shows the command
needed to fix the permissions would be more helpful.
Lets try as root instead:
# perf record --event /tmp/foo.o sleep 1
Lowering default frequency rate to 1000.
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# perf evlist
/tmp/foo.o
[root@felicio ~]# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
---
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
