summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)Author
2020-07-19net: remove compat_sys_{get,set}sockoptChristoph Hellwig
Now that the ->compat_{get,set}sockopt proto_ops methods are gone there is no good reason left to keep the compat syscalls separate. This fixes the odd use of unsigned int for the compat_setsockopt optlen and the missing sock_use_custom_sol_socket. It would also easily allow running the eBPF hooks for the compat syscalls, but such a large change in behavior does not belong into a consolidation patch like this one. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15selftests: mlxsw: Test policers' occupancyIdo Schimmel
Test that policers shared by different tc filters are correctly reference counted by observing policers' occupancy via devlink-resource. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15selftests: mlxsw: Add scale test for tc-policeIdo Schimmel
Query the maximum number of supported policers using devlink-resource and test that this number can be reached by configuring tc filters with police action. Test that an error is returned in case the maximum number is exceeded. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15selftests: mlxsw: tc_restrictions: Test tc-police restrictionsIdo Schimmel
Test that upper and lower limits on rate and burst size imposed by the device are rejected by the kernel. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15selftests: forwarding: Add tc-police testsIdo Schimmel
Test tc-police action in various scenarios such as Rx policing, Tx policing, shared policer and police piped to mirred. The test passes with both veth pairs and loopbacked ports. # ./tc_police.sh TEST: police on rx [ OK ] TEST: police on tx [ OK ] TEST: police with shared policer - rx [ OK ] TEST: police with shared policer - tx [ OK ] TEST: police rx and mirror [ OK ] TEST: police tx and mirror [ OK ] Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-07-14 The following pull-request contains BPF updates for your *net-next* tree. We've added 21 non-merge commits during the last 1 day(s) which contain a total of 20 files changed, 308 insertions(+), 279 deletions(-). The main changes are: 1) Fix selftests/bpf build, from Alexei. 2) Fix resolve_btfids build issues, from Jiri. 3) Pull usermode-driver-cleanup set, from Eric. 4) Two minor fixes to bpfilter, from Alexei and Masahiro. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14net: bridge: Add port attribute IFLA_BRPORT_MRP_IN_OPENHoratiu Vultur
This patch adds a new port attribute, IFLA_BRPORT_MRP_IN_OPEN, which allows to notify the userspace when the node lost the contiuity of MRP_InTest frames. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14bpf: Fix cross build for CONFIG_DEBUG_INFO_BTF optionJiri Olsa
Stephen and 0-DAY CI Kernel Test Service reported broken cross build for arm (arm-linux-gnueabi-gcc (GCC) 9.3.0), with following output: /tmp/ccMS5uth.s: Assembler messages: /tmp/ccMS5uth.s:69: Error: unrecognized symbol type "" /tmp/ccMS5uth.s:82: Error: unrecognized symbol type "" Having '@object' for .type diretive is wrong because '@' is comment character for some architectures. Using STT_OBJECT instead that should work everywhere. Also using HOST* variables to build resolve_btfids so it's properly build in crossbuilds (stolen from objtool's Makefile). Reported-by: kernel test robot <lkp@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/bpf/20200714102534.299280-2-jolsa@kernel.org
2020-07-13selftests/bpf: Fix merge conflict resolutionAlexei Starovoitov
Remove double definition of structs. Fixes: 71930d61025e ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-07-13 The following pull-request contains BPF updates for your *net-next* tree. We've added 36 non-merge commits during the last 7 day(s) which contain a total of 62 files changed, 2242 insertions(+), 468 deletions(-). The main changes are: 1) Avoid trace_printk warning banner by switching bpf_trace_printk to use its own tracing event, from Alan. 2) Better libbpf support on older kernels, from Andrii. 3) Additional AF_XDP stats, from Ciara. 4) build time resolution of BTF IDs, from Jiri. 5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13selftests: mlxsw: RED: Test offload of mirror on RED early_drop qeventPetr Machata
Add a selftest for offloading a mirror action attached to the block associated with RED early_drop qevent. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13tools/bpftool: Strip away modifiers from global variablesAndrii Nakryiko
Reliably remove all the type modifiers from read-only (.rodata) global variable definitions, including cases of inner field const modifiers and arrays of const values. Also modify one of selftests to ensure that const volatile struct doesn't prevent user-space from modifying .rodata variable. Fixes: 985ead416df3 ("bpftool: Add skeleton codegen command") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200713232409.3062144-3-andriin@fb.com
2020-07-13libbpf: Support stripping modifiers for btf_dumpAndrii Nakryiko
One important use case when emitting const/volatile/restrict is undesirable is BPF skeleton generation of DATASEC layout. These are further memory-mapped and can be written/read from user-space directly. For important case of .rodata variables, bpftool strips away first-level modifiers, to make their use on user-space side simple and not requiring extra type casts to override compiler complaining about writing to const variables. This logic works mostly fine, but breaks in some more complicated cases. E.g.: const volatile int params[10]; Because in BTF it's a chain of ARRAY -> CONST -> VOLATILE -> INT, bpftool stops at ARRAY and doesn't strip CONST and VOLATILE. In skeleton this variable will be emitted as is. So when used from user-space, compiler will complain about writing to const array. This is problematic, as also mentioned in [0]. To solve this for arrays and other non-trivial cases (e.g., inner const/volatile fields inside the struct), teach btf_dump to strip away any modifier, when requested. This is done as an extra option on btf_dump__emit_type_decl() API. Reported-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200713232409.3062144-2-andriin@fb.com
2020-07-13selftests/bpf: Add selftests verifying bpf_trace_printk() behaviourAlan Maguire
Simple selftests that verifies bpf_trace_printk() returns a sensible value and tracing messages appear. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/1594641154-18897-3-git-send-email-alan.maguire@oracle.com
2020-07-13tools/bpftool: Remove warning about PID iterator supportAndrii Nakryiko
Don't emit warning that bpftool was built without PID iterator support. This error garbles JSON output of otherwise perfectly valid show commands. Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200710232605.20918-1-andriin@fb.com
2020-07-13xsk: Add new statisticsCiara Loftus
It can be useful for the user to know the reason behind a dropped packet. Introduce new counters which track drops on the receive path caused by: 1. rx ring being full 2. fill ring being empty Also, on the tx path introduce a counter which tracks the number of times we attempt pull from the tx ring when it is empty. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200708072835.4427-2-ciara.loftus@intel.com
2020-07-13selftests/bpf: Add test for resolve_btfidsJiri Olsa
Adding resolve_btfids test under test_progs suite. It's possible to use btf_ids.h header and its logic in user space application, so we can add easy test for it. The test defines BTF_ID_LIST and checks it gets properly resolved. For this reason the test_progs binary (and other binaries that use TRUNNER* macros) is processed with resolve_btfids tool, which resolves BTF IDs in .BTF_ids section. The BTF data are taken from btf_data.o object rceated from progs/btf_data.c. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200711215329.41165-10-jolsa@kernel.org
2020-07-13tools headers: Adopt verbatim copy of btf_ids.h from kernel sourcesJiri Olsa
It will be needed by bpf selftest for resolve_btfids tool. Also adding __PASTE macro as btf_ids.h dependency, which is defined in: include/linux/compiler_types.h but because tools/include do not have this header, I'm putting the macro into linux/compiler.h header. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200711215329.41165-9-jolsa@kernel.org
2020-07-13bpf: Compile resolve_btfids tool at kernel compilation startJiri Olsa
The resolve_btfids tool will be used during the vmlinux linking, so it's necessary it's ready for it. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200711215329.41165-3-jolsa@kernel.org
2020-07-13bpf: Add resolve_btfids tool to resolve BTF IDs in ELF objectJiri Olsa
The resolve_btfids tool scans elf object for .BTF_ids section and resolves its symbols with BTF ID values. It will be used to during linking time to resolve arrays of BTF ID values used in verifier, so these IDs do not need to be resolved in runtime. The expected layout of .BTF_ids section is described in main.c header. Related kernel changes are coming in following changes. Build issue reported by 0-DAY CI Kernel Test Service. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200711215329.41165-2-jolsa@kernel.org
2020-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
All conflicts seemed rather trivial, with some guidance from Saeed Mameed on the tc_ct.c one. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking BPF programs, from Maciej Żenczykowski. 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu Mariappan. 3) Slay memory leak in nl80211 bss color attribute parsing code, from Luca Coelho. 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin. 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric Dumazet. 6) xsk code dips too deeply into DMA mapping implementation internals. Add dma_need_sync and use it. From Christoph Hellwig 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko. 8) Check for disallowed attributes when loading flow dissector BPF programs. From Lorenz Bauer. 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from Jason A. Donenfeld. 10) Don't advertise checksum offload on ipa devices that don't support it. From Alex Elder. 11) Resolve several issues in TCP MD5 signature support. Missing memory barriers, bogus options emitted when using syncookies, and failure to allow md5 key changes in established states. All from Eric Dumazet. 12) Fix interface leak in hsr code, from Taehee Yoo. 13) VF reset fixes in hns3 driver, from Huazhong Tan. 14) Make loopback work again with ipv6 anycast, from David Ahern. 15) Fix TX starvation under high load in fec driver, from Tobias Waldekranz. 16) MLD2 payload lengths not checked properly in bridge multicast code, from Linus Lüssing. 17) Packet scheduler code that wants to find the inner protocol currently only works for one level of VLAN encapsulation. Allow Q-in-Q situations to work properly here, from Toke Høiland-Jørgensen. 18) Fix route leak in l2tp, from Xin Long. 19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport support and various protocols. From Martin KaFai Lau. 20) Fix socket cgroup v2 reference counting in some situations, from Cong Wang. 21) Cure memory leak in mlx5 connection tracking offload support, from Eli Britstein. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) mlxsw: pci: Fix use-after-free in case of failed devlink reload mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON() net: macb: fix call to pm_runtime in the suspend/resume functions net: macb: fix macb_suspend() by removing call to netif_carrier_off() net: macb: fix macb_get/set_wol() when moving to phylink net: macb: mark device wake capable when "magic-packet" property present net: macb: fix wakeup test in runtime suspend/resume routines bnxt_en: fix NULL dereference in case SR-IOV configuration fails libbpf: Fix libbpf hashmap on (I)LP32 architectures net/mlx5e: CT: Fix memory leak in cleanup net/mlx5e: Fix port buffers cell size value net/mlx5e: Fix 50G per lane indication net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash net/mlx5e: Fix VXLAN configuration restore after function reload net/mlx5e: Fix usage of rcu-protected pointer net/mxl5e: Verify that rpriv is not NULL net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode net/mlx5: Fix eeprom support for SFP module cgroup: Fix sock_cgroup_data on big-endian. selftests: bpf: Fix detach from sockmap tests ...
2020-07-10selftests: net: add a test for UDP tunnel info infraJakub Kicinski
Add validating the UDP tunnel infra works. $ ./udp_tunnel_nic.sh PASSED all 383 checks Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10Merge tag 'linux-kselftest-fixes-5.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "TPM2 test changes to run on python3 and kselftest framework fix to incorrect return type" * tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: ksft_test_num return type should be unsigned selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3
2020-07-10libbpf: Fix memory leak and optimize BTF sanitizationAndrii Nakryiko
Coverity's static analysis helpfully reported a memory leak introduced by 0f0e55d8247c ("libbpf: Improve BTF sanitization handling"). While fixing it, I realized that btf__new() already creates a memory copy, so there is no need to do this. So this patch also fixes misleading btf__new() signature to make data into a `const void *` input parameter. And it avoids unnecessary memory allocation and copy in BTF sanitization code altogether. Fixes: 0f0e55d8247c ("libbpf: Improve BTF sanitization handling") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200710011023.1655008-1-andriin@fb.com
2020-07-09libbpf: Fix libbpf hashmap on (I)LP32 architecturesJakub Bogusz
On ILP32, 64-bit result was shifted by value calculated for 32-bit long type and returned value was much outside hashmap capacity. As advised by Andrii Nakryiko, this patch uses different hashing variant for architectures with size_t shorter than long long. Fixes: e3b924224028 ("libbpf: add resizable non-thread safe internal hashmap") Signed-off-by: Jakub Bogusz <qboosh@pld-linux.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200709225723.1069937-1-andriin@fb.com
2020-07-09selftests: bpf: Fix detach from sockmap testsLorenz Bauer
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour. In the first case, the tests check that detaching without giving a program succeeds. Since these are not the desired semantics, invert the condition. In the second case, the clean up code doesn't supply the necessary program fds. Fixes: bb0de3131f4c ("bpf: sockmap: Require attach_bpf_fd when detaching a program") Reported-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
2020-07-09selftests: net: Add port split testDanielle Ratson
Test port split configuration using previously added number of port lanes attribute. Check that all the splittable ports are successfully split to their maximum number of lanes and below, and that those which are not splittable fail to be split. Test output example: TEST: swp4 is unsplittable [ OK ] TEST: split port swp53 into 4 [ OK ] TEST: Unsplit port pci/0000:03:00.0/25 [ OK ] TEST: split port swp53 into 2 [ OK ] TEST: Unsplit port pci/0000:03:00.0/25 [ OK ] Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09Merge tag 'kallsyms_show_value-v5.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kallsyms fix from Kees Cook: "Refactor kallsyms_show_value() users for correct cred. I'm not delighted by the timing of getting these changes to you, but it does fix a handful of kernel address exposures, and no one has screamed yet at the patches. Several users of kallsyms_show_value() were performing checks not during "open". Refactor everything needed to gain proper checks against file->f_cred for modules, kprobes, and bpf" * tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests: kmod: Add module address visibility test bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok() kprobes: Do not expose probe addresses to non-CAP_SYSLOG module: Do not expose section addresses to non-CAP_SYSLOG module: Refactor section attr into bin attribute kallsyms: Refactor kallsyms_show_value() to take cred
2020-07-09selftests/mptcp: add diag interface testsPaolo Abeni
basic functional test, triggering the msk diag interface code. Require appropriate iproute2 support, skip elsewhere. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08selftests: kmod: Add module address visibility testKees Cook
Make sure we don't regress the CAP_SYSLOG behavior of the module address visibility via /proc/modules nor /sys/module/*/sections/*. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-09selftests/bpf: Switch perf_buffer test to tracepoint and skeletonAndrii Nakryiko
Switch perf_buffer test to use skeleton to avoid use of bpf_prog_load() and make test a bit more succinct. Also switch BPF program to use tracepoint instead of kprobe, as that allows to support older kernels, which had tracepoint support before kprobe support in the form that libbpf expects (i.e., libbpf expects /sys/bus/event_source/devices/kprobe/type, which doesn't always exist on old kernels). Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200708015318.3827358-7-andriin@fb.com
2020-07-09libbpf: Handle missing BPF_OBJ_GET_INFO_BY_FD gracefully in perf_bufferAndrii Nakryiko
perf_buffer__new() is relying on BPF_OBJ_GET_INFO_BY_FD availability for few sanity checks. OBJ_GET_INFO for maps is actually much more recent feature than perf_buffer support itself, so this causes unnecessary problems on old kernels before BPF_OBJ_GET_INFO_BY_FD was added. This patch makes those sanity checks optional and just assumes best if command is not supported. If user specified something incorrectly (e.g., wrong map type), kernel will reject it later anyway, except user won't get a nice explanation as to why it failed. This seems like a good trade off for supporting perf_buffer on old kernels. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200708015318.3827358-6-andriin@fb.com
2020-07-09selftests/bpf: Add test relying only on CO-RE and no recent kernel featuresAndrii Nakryiko
Add a test that relies on CO-RE, but doesn't expect any of the recent features, not available on old kernels. This is useful for Travis CI tests running against very old kernels (e.g., libbpf has 4.9 kernel testing now), to verify that CO-RE still works, even if kernel itself doesn't support BTF yet, as long as there is .BTF embedded into vmlinux image by pahole. Given most of CO-RE doesn't require any kernel awareness of BTF, it is a useful test to validate that libbpf's BTF sanitization is working well even with ancient kernels. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200708015318.3827358-5-andriin@fb.com
2020-07-09libbpf: Improve BTF sanitization handlingAndrii Nakryiko
Change sanitization process to preserve original BTF, which might be used by libbpf itself for Kconfig externs, CO-RE relocs, etc, even if kernel is old and doesn't support BTF. To achieve that, if libbpf detects the need for BTF sanitization, it would clone original BTF, sanitize it in-place, attempt to load it into kernel, and if successful, will preserve loaded BTF FD in original `struct btf`, while freeing sanitized local copy. If kernel doesn't support any BTF, original btf and btf_ext will still be preserved to be used later for CO-RE relocation and other BTF-dependent libbpf features, which don't dependon kernel BTF support. Patch takes care to not specify BTF and BTF.ext features when loading BPF programs and/or maps, if it was detected that kernel doesn't support BTF features. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200708015318.3827358-4-andriin@fb.com
2020-07-09libbpf: Add btf__set_fd() for more control over loaded BTF FDAndrii Nakryiko
Add setter for BTF FD to allow application more fine-grained control in more advanced scenarios. Storing BTF FD inside `struct btf` provides little benefit and probably would be better done differently (e.g., btf__load() could just return FD on success), but we are stuck with this due to backwards compatibility. The main problem is that it's impossible to load BTF and than free user-space memory, but keep FD intact, because `struct btf` assumes ownership of that FD upon successful load and will attempt to close it during btf__free(). To allow callers (e.g., libbpf itself for BTF sanitization) to have more control over this, add btf__set_fd() to allow to reset FD arbitrarily, if necessary. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200708015318.3827358-3-andriin@fb.com
2020-07-09libbpf: Make BTF finalization strictAndrii Nakryiko
With valid ELF and valid BTF, there is no reason (apart from bugs) why BTF finalization should fail. So make it strict and return error if it fails. This makes CO-RE relocation more reliable, as they are not going to be just silently skipped, if BTF finalization failed. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200708015318.3827358-2-andriin@fb.com
2020-07-09selftests/bpf: test_progs avoid minus shell exit codesJesper Dangaard Brouer
There are a number of places in test_progs that use minus-1 as the argument to exit(). This is confusing as a process exit status is masked to be a number between 0 and 255 as defined in man exit(3). Thus, users will see status 255 instead of minus-1. This patch use positive exit code 3 instead of minus-1. These cases are put in the same group of infrastructure setup errors. Fixes: fd27b1835e70 ("selftests/bpf: Reset process and thread affinity after each test/sub-test") Fixes: 811d7e375d08 ("bpf: selftests: Restore netns after each test") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159410594499.1093222.11080787853132708654.stgit@firesoul
2020-07-09selftests/bpf: test_progs use another shell exit on non-actionsJesper Dangaard Brouer
This is a follow up adjustment to commit 6c92bd5cd465 ("selftests/bpf: Test_progs indicate to shell on non-actions"), that returns shell exit indication EXIT_FAILURE (value 1) when user selects a non-existing test. The problem with using EXIT_FAILURE is that a shell script cannot tell the difference between a non-existing test and the test failing. This patch uses value 2 as shell exit indication. (Aside note unrecognized option parameters use value 64). Fixes: 6c92bd5cd465 ("selftests/bpf: Test_progs indicate to shell on non-actions") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159410593992.1093222.90072558386094370.stgit@firesoul
2020-07-09bpf: Fix another bpftool segfault without skeleton code enabledLouis Peens
emit_obj_refs_json needs to added the same as with emit_obj_refs_plain to prevent segfaults, similar to Commit "8ae4121bd89e bpf: Fix bpftool without skeleton code enabled"). See the error below: # ./bpftool -p prog { "error": "bpftool built without PID iterator support" },[{ "id": 2, "type": "cgroup_skb", "tag": "7be49e3934a125ba", "gpl_compatible": true, "loaded_at": 1594052789, "uid": 0, "bytes_xlated": 296, "jited": true, "bytes_jited": 203, "bytes_memlock": 4096, "map_ids": [2,3 Segmentation fault (core dumped) The same happens for ./bpftool -p map, as well as ./bpftool -j prog/map. Fixes: d53dee3fe013 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs") Signed-off-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200708110827.7673-1-louis.peens@netronome.com
2020-07-08Raise gcc version requirement to 4.9Linus Torvalds
I realize that we fairly recently raised it to 4.8, but the fact is, 4.9 is a much better minimum version to target. We have a number of workarounds for actual bugs in pre-4.9 gcc versions (including things like internal compiler errors on ARM), but we also have some syntactic workarounds for lacking features. In particular, raising the minimum to 4.9 means that we can now just assume _Generic() exists, which is likely the much better replacement for a lot of very convoluted built-time magic with conditionals on sizeof and/or __builtin_choose_expr() with same_type() etc. Using _Generic also means that you will need to have a very recent version of 'sparse', but thats easy to build yourself, and much less of a hassle than some old gcc version can be. The latest (in a long string) of reasons for minimum compiler version upgrades was commit 5435f73d5c4a ("efi/x86: Fix build with gcc 4"). Ard points out that RHEL 7 uses gcc-4.8, but the people who stay back on old RHEL versions persumably also don't build their own kernels anyway. And maybe they should cross-built or just have a little side affair with a newer compiler? Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-08selftests: bpf: Remove unused bpf_map_def_legacy structDaniel T. Lee
samples/bpf no longer use bpf_map_def_legacy and instead use the libbpf's bpf_map_def or new BTF-defined MAP format. This commit removes unused bpf_map_def_legacy struct from selftests/bpf/bpf_legacy.h. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200707184855.30968-5-danieltimlee@gmail.com
2020-07-08selftests/bpf: Test BPF_CGROUP_INET_SOCK_RELEASEStanislav Fomichev
Simple test that enforces a single SOCK_DGRAM socket per cgroup. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200706230128.4073544-5-sdf@google.com
2020-07-08bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASEStanislav Fomichev
Support attaching to BPF_CGROUP_INET_SOCK_RELEASE and properly display attach type upon prog dump. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200706230128.4073544-4-sdf@google.com
2020-07-08libbpf: Add support for BPF_CGROUP_INET_SOCK_RELEASEStanislav Fomichev
Add auto-detection for the cgroup/sock_release programs. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200706230128.4073544-3-sdf@google.com
2020-07-07Merge tag 'perf-tools-fixes-2020-07-07' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Intel PT fixes for PEBS-via-PT with registers - Fixes for Intel PT python based GUI - Avoid duplicated sideband events with Intel PT in system wide tracing - Remove needless 'dummy' event from TUI menu, used when synthesizing meta data events for pre-existing processes - Fix corner case segfault when pressing enter in a screen without entries in the TUI for report/top - Fixes for time stamp handling in libtraceevent - Explicitly set utf-8 encoding in perf flamegraph - Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy', silencing perf build warning * tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf report TUI: Remove needless 'dummy' event from menu perf intel-pt: Fix PEBS sample for XMM registers perf intel-pt: Fix displaying PEBS-via-PT with registers perf intel-pt: Fix recording PEBS-via-PT with registers perf report TUI: Fix segmentation fault in perf_evsel__hists_browse() tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handling tools lib traceevent: Add API to read time information from kbuffer perf scripts python: exported-sql-viewer.py: Fix time chart call tree perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' result perf scripts python: exported-sql-viewer.py: Fix zero id in call graph 'Find' result perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' result perf record: Fix duplicated sideband events with Intel PT system wide tracing perf scripts python: export-to-postgresql.py: Fix struct.pack() int argument tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy' perf flamegraph: Explicitly set utf-8 encoding
2020-07-06kselftest: ksft_test_num return type should be unsignedPaolo Bonzini
Fixes a compiler warning: In file included from sync_test.c:37: ../kselftest.h: In function ‘ksft_print_cnts’: ../kselftest.h:78:16: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare] if (ksft_plan != ksft_test_num()) ^~ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-06ipv6: fib6_select_path can not use out path for nexthop objectsDavid Ahern
Brian reported a crash in IPv6 code when using rpfilter with a setup running FRR and external nexthop objects. The root cause of the crash is fib6_select_path setting fib6_nh in the result to NULL because of an improper check for nexthop objects. More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif set causing fib6_select_path to be called with have_oif_match set. fib6_select_path has early check on have_oif_match and jumps to the out label which presumes a builtin fib6_nh. This path is invalid for nexthop objects; for external nexthops fib6_select_path needs to just return if the fib6_nh has already been set in the result otherwise it returns after the call to nexthop_path_fib6_result. Update the check on have_oif_match to not bail on external nexthops. Update selftests for this problem. Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info") Reported-by: Brian Rak <brak@choopa.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3Pengfei Xu
Python 2 is no longer supported by the Python upstream project, so upgrade TPM2 tests to Python 3. Fixed minor merge conflicts Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Pengfei Xu <pengfei.xu@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-06selftests: mptcp: capture pcap on both sidesMatthieu Baerts
When investigating performance issues that involve latency / loss / reordering it is useful to have the pcap from the sender-side as it allows to easier infer the state of the sender's congestion-control, loss-recovery, etc. Allow the selftests to capture a pcap on both sender and receiver so that this information is not lost when reproducing. This patch also improves the file names. Instead of: ns4-5ee79a56-X4O6gS-ns3-5ee79a56-X4O6gS-MPTCP-MPTCP-10.0.3.1.pcap We now have something like for the same test: 5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-connector.pcap 5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-listener.pcap It was a connection from ns3 to ns4, better to start with ns3 then. The port is also added, easier to find the trace we want. Co-developed-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-16 01:45:56 +0000