Age | Commit message (Collapse) | Author |
|
Test that each veto that was added in the previous patch, is indeed
vetoed.
$ ./q_in_q_veto.sh
TEST: create 802.1ad vlan upper on top of a front panel [ OK ]
TEST: create 802.1ad vlan upper on top of a bridge port [ OK ]
TEST: create 802.1ad vlan upper on top of a lag [ OK ]
TEST: create 802.1ad vlan upper on top 802.1q bridge [ OK ]
TEST: create 802.1ad vlan upper on top 802.1ad bridge [ OK ]
TEST: create 802.1q vlan upper on top 802.1ad bridge [ OK ]
TEST: create vlan upper on top of front panel enslaved to 802.1ad bridge
[ OK ]
TEST: create vlan upper on top of lag enslaved to 802.1ad bridge [ OK ]
TEST: enslave front panel with vlan upper to 802.1ad bridge [ OK ]
TEST: enslave lag with vlan upper to 802.1ad bridge [ OK ]
TEST: IP address addition to 802.1ad bridge [ OK ]
TEST: switch bridge protocol [ OK ]
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Store the size and the checksum fields in the footer as le32
instead of u32. This will allow us to apply bootconfig to the
cross build initrd without caring the endianness.
Link: https://lkml.kernel.org/r/160583935332.547349.5897811300636587426.stgit@devnote2
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Flavored variants of test_progs (e.g. test_progs-no_alu32) change their
working directory to the corresponding subdirectory (e.g. no_alu32).
Since the setup script required by test_ima (ima_setup.sh) is not
mentioned in the dependencies, it does not get copied to these
subdirectories and causes flavored variants of test_ima to fail.
Adding the script to TRUNNER_EXTRA_FILES ensures that the file is also
copied to the subdirectories for the flavored variants of test_progs.
Fixes: 34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Yonghong Song <yhs@fb.com>
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201126184946.1708213-1-kpsingh@chromium.org
|
|
a proper kernel configuration for running kselftest can be obtained with:
$ yes | make kselftest-merge
enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail
when trying to run tdc test items contained in red.json.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-11-28
1) Do not reference the skb for xsk's generic TX side since when looped
back into RX it might crash in generic XDP, from Björn Töpel.
2) Fix umem cleanup on a partially set up xsk socket when being destroyed,
from Magnus Karlsson.
3) Fix an incorrect netdev reference count when failing xsk_bind() operation,
from Marek Majtyka.
4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(),
from Zhen Lei.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add MAINTAINERS entry for BPF LSM
bpftool: Fix error return value in build_btf_type_table
net, xsk: Avoid taking multiple skbuff references
xsk: Fix incorrect netdev reference count
xsk: Fix umem cleanup bug at socket destruct
MAINTAINERS: Update XDP and AF_XDP entries
====================
Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new cipher as a variant of standard tls selftests
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace size_t with __u32 in the xsk interfaces that contain this.
There is no reason to have size_t since the internal variable that
is manipulated is a __u32. The following APIs are affected:
__u32 xsk_ring_prod__reserve(struct xsk_ring_prod *prod, __u32 nb, __u32 *idx)
void xsk_ring_prod__submit(struct xsk_ring_prod *prod, __u32 nb)
__u32 xsk_ring_cons__peek(struct xsk_ring_cons *cons, __u32 nb, __u32 *idx)
void xsk_ring_cons__cancel(struct xsk_ring_cons *cons, __u32 nb)
void xsk_ring_cons__release(struct xsk_ring_cons *cons, __u32 nb)
The "nb" variable and the return values have been changed from size_t
to __u32.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1606383455-8243-1-git-send-email-magnus.karlsson@gmail.com
|
|
Since some gcc generates a broken DWARF which lacks DW_AT_declaration
attribute from the subprogram DIE of function prototype.
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97060)
So, in addition to the DW_AT_declaration check, we also check the
subprogram DIE has DW_AT_inline or actual entry pc.
Committer testing:
# cat /etc/fedora-release
Fedora release 33 (Thirty Three)
#
Before:
# perf test vfs_getname
78: Use vfs_getname probe to get syscall args filenames : FAILED!
79: Check open filename arg using perf trace + vfs_getname : FAILED!
81: Add vfs_getname probe to get syscall args filenames : FAILED!
#
After:
# perf test vfs_getname
78: Use vfs_getname probe to get syscall args filenames : Ok
79: Check open filename arg using perf trace + vfs_getname : Ok
81: Add vfs_getname probe to get syscall args filenames : Ok
#
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: http://lore.kernel.org/lkml/160645613571.2824037.7441351537890235895.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix die_entrypc() to return error correctly if the DIE has no
DW_AT_ranges attribute. Since dwarf_ranges() will treat the case as an
empty ranges and return 0, we have to check it by ourselves.
Fixes: 91e2f539eeda ("perf probe: Fix to show function entry line as probe-able")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/160645612634.2824037.5284932731175079426.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently perf stat shows some metrics (like IPC) for defined events.
But when no aggregation mode is used (-A option), it shows incorrect
values since it used a value from a different cpu.
Before:
$ perf stat -aA -e cycles,instructions sleep 1
Performance counter stats for 'system wide':
CPU0 116,057,380 cycles
CPU1 86,084,722 cycles
CPU2 99,423,125 cycles
CPU3 98,272,994 cycles
CPU0 53,369,217 instructions # 0.46 insn per cycle
CPU1 33,378,058 instructions # 0.29 insn per cycle
CPU2 58,150,086 instructions # 0.50 insn per cycle
CPU3 40,029,703 instructions # 0.34 insn per cycle
1.001816971 seconds time elapsed
So the IPC for CPU1 should be 0.38 (= 33,378,058 / 86,084,722)
but it was 0.29 (= 33,378,058 / 116,057,380) and so on.
After:
$ perf stat -aA -e cycles,instructions sleep 1
Performance counter stats for 'system wide':
CPU0 109,621,384 cycles
CPU1 159,026,454 cycles
CPU2 99,460,366 cycles
CPU3 124,144,142 cycles
CPU0 44,396,706 instructions # 0.41 insn per cycle
CPU1 120,195,425 instructions # 0.76 insn per cycle
CPU2 44,763,978 instructions # 0.45 insn per cycle
CPU3 69,049,079 instructions # 0.56 insn per cycle
1.001910444 seconds time elapsed
Fixes: 44d49a600259 ("perf stat: Support metrics in --per-core/socket mode")
Reported-by: Sam Xi <xyzsam@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201127041404.390276-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It didn't check the tool->cgroup_events bit which is set when the
--all-cgroups option is given. Without it, samples will not have cgroup
info so no reason to synthesize.
We can check the PERF_RECORD_CGROUP records after running perf record
*WITHOUT* the --all-cgroups option:
Before:
$ perf report -D | grep CGROUP
0 0 0x8430 [0x38]: PERF_RECORD_CGROUP cgroup: 1 /
CGROUP events: 1
CGROUP events: 0
CGROUP events: 0
After:
$ perf report -D | grep CGROUP
CGROUP events: 0
CGROUP events: 0
CGROUP events: 0
Committer testing:
Before:
# perf record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data (10003 samples) ]
# perf report -D | grep "CGROUP events"
CGROUP events: 146
CGROUP events: 0
CGROUP events: 0
#
After:
# perf record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data (10448 samples) ]
# perf report -D | grep "CGROUP events"
CGROUP events: 0
CGROUP events: 0
CGROUP events: 0
#
With all-cgroups:
# perf record --all-cgroups -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.374 MB perf.data (11526 samples) ]
# perf report -D | grep "CGROUP events"
CGROUP events: 146
CGROUP events: 0
CGROUP events: 0
#
Fixes: 8fb4b67939e16 ("perf record: Add --all-cgroups option")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201127054356.405481-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
An appropriate return value should be set on the failed path.
Fixes: 2a09a84c720b436a ("perf diff: Support hot streams comparison")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201124103652.438-1-thunder.leizhen@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
7a078d2d18801bba ("libbpf, hashmap: Fix undefined behavior in hash_bits")
That don't entail any changes in tools/perf.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before this patch, profiler.inc.h wouldn't compile with clang-11 (before
the __builtin_preserve_enum_value LLVM builtin was introduced in
https://reviews.llvm.org/D83242).
Another test that uses this builtin (test_core_enumval) is conditionally
skipped if the compiler is too old. In that spirit, this patch inhibits
part of populate_cgroup_info(), which needs this CO-RE builtin. The
selftests build again on clang-11.
The affected test (the profiler test) doesn't pass on clang-11 because
it's missing https://reviews.llvm.org/D85570, but at least the test suite
as a whole compiles. The test's expected failure is already called out in
the README.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Florian Lehner <dev@der-flo.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201125035255.17970-1-andreimatei1@gmail.com
|
|
The test does the following:
- Mounts a loopback filesystem and appends the IMA policy to measure
executions only on this file-system. Restricting the IMA policy to
a particular filesystem prevents a system-wide IMA policy change.
- Executes an executable copied to this loopback filesystem.
- Calls the bpf_ima_inode_hash in the bprm_committed_creds hook and
checks if the call succeeded and checks if a hash was calculated.
The test shells out to the added ima_setup.sh script as the setup is
better handled in a shell script and is more complicated to do in the
test program or even shelling out individual commands from C.
The list of required configs (i.e. IMA, SECURITYFS,
IMA_{WRITE,READ}_POLICY) for running this test are also updated.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (limit policy rule to loopback mount)
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201124151210.1081188-4-kpsingh@chromium.org
|
|
Provide a wrapper function to get the IMA hash of an inode. This helper
is useful in fingerprinting files (e.g executables on execution) and
using these fingerprints in detections like an executable unlinking
itself.
Since the ima_inode_hash can sleep, it's only allowed for sleepable
LSM hooks.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201124151210.1081188-3-kpsingh@chromium.org
|
|
Add a new function for returning descriptors the user received
after an xsk_ring_cons__peek call. After the application has
gotten a number of descriptors from a ring, it might not be able
to or want to process them all for various reasons. Therefore,
it would be useful to have an interface for returning or
cancelling a number of them so that they are returned to the ring.
This patch adds a new function called xsk_ring_cons__cancel that
performs this operation on nb descriptors counted from the end of
the batch of descriptors that was received through the peek call.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
[ Magnus Karlsson: rewrote changelog ]
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1606202474-8119-1-git-send-email-lirongqing@baidu.com
|
|
An appropriate return value should be set on the failed path.
Fixes: 4d374ba0bf30 ("tools: bpftool: implement "bpftool btf show|list"")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201124104100.491-1-thunder.leizhen@huawei.com
|
|
A couple of places in the readme had invalid rst formatting causing the
rendering to be off. This patch fixes them with minimal edits.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201122022205.57229-2-andreimatei1@gmail.com
|
|
The link was bad because of invalid rst; it was pointing to itself and
was rendering badly.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201122022205.57229-1-andreimatei1@gmail.com
|
|
Test that packets hitting a blackhole nexthop are trapped to the CPU
when the trap is enabled. Test that packets are not reported when the
trap is disabled.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that IPv4 and IPv6 ping fail when the route is using a blackhole
nexthop or a group with a blackhole nexthop. Test that ping passes when
the route starts using a valid nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test the mlxsw allows blackhole nexthops to be installed and that the
nexthops are marked as offloaded.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This gets the seccomp selftests running again on powerpc and sh, and
fixes an audit reporting oversight noticed in both seccomp and ptrace.
- Fix typos in seccomp selftests on powerpc and sh (Kees Cook)
- Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël
Salaün)"
* tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: sh: Fix register names
selftests/seccomp: powerpc: Fix typo in macro variable name
seccomp: Set PF_SUPERPRIV when checking capability
ptrace: Set PF_SUPERPRIV when checking capability
|
|
This patch added IPv6 support for do_transfer, and the test cases for
ADD_ADDR IPv6.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test case where a link fails with multiple subflows.
The expectation is that MPTCP will transmit any data that
could not be delivered via the failed link on another subflow.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a nexthop objects version of gre_multipath.sh. Unlike the original
test, it also tests IPv6 overlay which is not possible with the legacy
nexthop implementation. See commit 9a2ad3623868 ("selftests: forwarding:
gre_multipath: Drop IPv6 tests") for more info.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a similar fashion to router_multipath.sh and its nexthop objects
version router_mpath_nh.sh, create a nexthop objects version of
router.sh.
It reuses the same topology, but uses device-only nexthop objects
instead of legacy ones.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In addition to IPv4 multipath tests with IPv4 nexthops, also test IPv4
multipath with nexthops that use IPv6 link-local addresses.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
routing_nh_obj() is used to configure the nexthop objects employed by
the test, but it is called twice resulting in "RTNETLINK answers: File
exists" messages.
Remove the first call, so that the function is only called after
setup_wait(), when all the interfaces are up and ready.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that unsupported nexthop objects are rejected and that offload
indication is correctly set on: nexthop objects, nexthop group objects
and routes associated these objects.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add scripts to test ring and coalesce settings
of netdevsim.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As pointed out by Michal Kubecek, getting the name
with the previous approach was racy, it's better
and easier to get the name of the device with this
patch's approach.
Essentialy the function doesn't need to exist
anymore as it's a simple 'ls' command.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Factor out some useful functions so that they can be reused
by other ethtool-netdevsim scripts.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It looks like the seccomp selftests was never actually built for sh.
This fixes it, though I don't have an environment to do a runtime test
of it yet.
Fixes: 0bb605c2c7f2b4b3 ("sh: Add SECCOMP_FILTER")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/lkml/a36d7b48-6598-1642-e403-0c77a86f416d@physik.fu-berlin.de
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
A typo sneaked into the powerpc selftest. Fix the name so it builds again.
Fixes: 46138329faea ("selftests/seccomp: powerpc: Fix seccomp return value testing")
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/87y2ix2895.fsf@mpe.ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Commit 47c09d6a9f67("bpftool: Introduce "prog profile" command")
introduced "bpftool prog profile" command which can be used
to profile bpf program with metrics like # of instructions,
This patch added support for itlb_misses and dtlb_misses.
During an internal bpf program performance evaluation,
I found these two metrics are also very useful. The following
is an example output:
$ bpftool prog profile id 324 duration 3 cycles itlb_misses
1885029 run_cnt
5134686073 cycles
306893 itlb_misses
$ bpftool prog profile id 324 duration 3 cycles dtlb_misses
1827382 run_cnt
4943593648 cycles
5975636 dtlb_misses
$ bpftool prog profile id 324 duration 3 cycles llc_misses
1836527 run_cnt
5019612972 cycles
4161041 llc_misses
From the above, we can see quite some dtlb misses, 3 dtlb misses
perf prog run. This might be something worth further investigation.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201119073039.4060095-1-yhs@fb.com
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc5, including fixes from the WiFi
(mac80211), can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid
crash
- lan743x:
- prevent interrupt storm on open
- fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths, mostly
detected by the Hulk Robot"
* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
net/smc: fix matching of existing link groups
ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
libbpf: Fix VERSIONED_SYM_COUNT number parsing
net/mlx4_core: Fix init_hca fields offset
atm: nicstar: Unmap DMA on send error
page_frag: Recover from memory pressure
net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
mlxsw: core: Use variable timeout for EMAD retries
mlxsw: Fix firmware flashing
net: Have netpoll bring-up DSA management interface
atl1e: fix error return code in atl1e_probe()
atl1c: fix error return code in atl1c_probe()
ah6: fix error return code in ah6_input()
net: usb: qmi_wwan: Set DTR quirk for MR400
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
...
|
|
Pull rdma fixes from Jason Gunthorpe:
"The last two weeks have been quiet here, just the usual smattering of
long standing bug fixes.
A collection of error case bug fixes:
- Improper nesting of spinlock types in cm
- Missing error codes and kfree()
- Ensure dma_virt_ops users have the right kconfig symbols to work
properly
- Compilation failure of tools/testing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
tools/testing/scatterlist: Fix test to compile and run
IB/hfi1: Fix error return code in hfi1_init_dd()
RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs
RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device()
RDMA/cm: Make the local_id_table xarray non-irq
|
|
Alexei Starovoitov says:
====================
1) libbpf should not attempt to load unused subprogs, from Andrii.
2) Make strncpy_from_user() mask out bytes after NUL terminator, from Daniel.
3) Relax return code check for subprograms in the BPF verifier, from Dmitrii.
4) Fix several sockmap issues, from John.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
libbpf: Fix VERSIONED_SYM_COUNT number parsing
bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list
bpf, sockmap: Handle memory acct if skb_verdict prog redirects to self
bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self
bpf, sockmap: Use truesize with sk_rmem_schedule()
bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect
bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made
selftests/bpf: Fix error return code in run_getsockopt_test()
bpf: Relax return code check for subprograms
tools, bpftool: Add missing close before bpftool net attach exit
MAINTAINERS/bpf: Update Andrii's entry.
selftests/bpf: Fix unused attribute usage in subprogs_unused test
bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_id
bpf: Fix passing zero to PTR_ERR() in bpf_btf_printf_prepare
libbpf: Don't attempt to load unused subprog as an entry-point BPF program
====================
Link: https://lore.kernel.org/r/20201119200721.288-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, bpf_probe_read_user_str() could potentially overcopy the
trailing bytes after the NUL due to how do_strncpy_from_user() does the
copy in long-sized strides. The issue has been fixed in the previous
commit.
This commit adds a selftest that ensures we don't regress
bpf_probe_read_user_str() again.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4d977508fab4ec5b7b574b85bdf8b398868b6ee9.1605642949.git.dxu@dxuuu.xyz
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes for CVE-2020-4788.
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1
cache before it has been completely validated, via a way-prediction
mechanism. It is not possible for an attacker to determine the
contents of impermissible memory using this method, since these
systems implement a combination of hardware and software security
measures to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker
induces the operating system to speculatively execute instructions
using data that the attacker controls. This can be used for example to
speculatively bypass "kernel user access prevention" techniques, as
discovered by Anthony Steinhauser of Google's Safeside Project. This
is not an attack by itself, but there is a possibility it could be
used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and
after the kernel performs any user accesses (patch 3). It also adds a
self-test and performs some related cleanups"
* tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
selftests/powerpc: refactor entry and rfi_flush tests
selftests/powerpc: entry flush test
powerpc: Only include kup-radix.h for 64-bit Book3S
powerpc/64s: flush L1D after user accesses
powerpc/64s: flush L1D on kernel entry
selftests/powerpc: rfi_flush: disable entry flush if present
|
|
We remove "other info" from "readelf -s --wide" output when
parsing GLOBAL_SYM_COUNT variable, which was added in [1].
But we don't do that for VERSIONED_SYM_COUNT and it's failing
the check_abi target on powerpc Fedora 33.
The extra "other info" wasn't problem for VERSIONED_SYM_COUNT
parsing until commit [2] added awk in the pipe, which assumes
that the last column is symbol, but it can be "other info".
Adding "other info" removal for VERSIONED_SYM_COUNT the same
way as we did for GLOBAL_SYM_COUNT parsing.
[1] aa915931ac3e ("libbpf: Fix readelf output parsing for Fedora")
[2] 746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check")
Fixes: 746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201118211350.1493421-1-jolsa@kernel.org
|
|
Align the bootconfig applied initrd image size to 4. To fill the gap,
the bootconfig command uses null characters in between the bootconfig
data and the footer. This will expands the footer size but don't change
the checksum.
Thus the block image of the initrd file with bootconfig is as follows.
[initrd][bootconfig][(pad)][size][csum]["#BOOTCONFIG\n"]
Link: https://lkml.kernel.org/r/160576522046.320071.8550680670010950634.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Fix to check the write(2) failure including partial write
correctly and try to rollback the partial write, because
if there is no BOOTCONFIG_MAGIC string, we can not remove it.
Link: https://lkml.kernel.org/r/160576521135.320071.3883101436675969998.stgit@devnote2
Fixes: 85c46b78da58 ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Fix not to refer the errno variable as the result of previous libc
functions after printf() because printf() can change the errno.
Link: https://lkml.kernel.org/r/160576520243.320071.51093664672431249.stgit@devnote2
Fixes: 85c46b78da58 ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
For simplicity in backporting, the original entry_flush test contained
a lot of duplicated code from the rfi_flush test. De-duplicate that code.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.
For simplicity of backporting, this test duplicates a lot of code from
rfi_flush. We clean that up in the next patch.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|