summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)Author
2010-06-04perf symbols: Set the DSO long name when using symbol_conf.vmlinux_nameArnaldo Carvalho de Melo
We need to set the long name to the name specified via, for instance, 'perf annotate --vmlinux /path/to/vmlinux', if not it will remain as '[kernel.kallsyms]' and that will make annotate fail when passing this as the vmlinux name in the call to objdump. The way this is setup grew unwieldly and dso__load_vmlinux is the function that should allocate space for the long name, with callers not assuming that filenames should be allocated somehow by then (strdup, dso__build_id_filename, etc). For now this is the minimalistic patch, a proper fix for .36 will be made. Reported-by: Stephane Eranian <eranian@google.com> Tested-by: Stephane Eranian <eranian@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100604003900.GD10469@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-02Merge branch 'perf/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent
2010-06-01perf buildid-list: Fix --with-hits event processingArnaldo Carvalho de Melo
When we use plain 'perf buildid-list' we use only what is in the buildid table in the perf.data header. And those have absolute pathnames because at 'perf record' time we used __perf_session__process_events and that doesn't sets up the path shortening code in map__new() that happens if symbol_conf.full_paths is false, the default. On the other hand, when we use 'perf buildid-list --with-hits' we process all the events using perf_session__process_events, adding entries to the global DSO list _after_ removing the current directory from the DSO name, for presentation purposes. Because of that we end up having two entries in the DSO list when recording events for binaries using relative pathnames. Fix it minimally by setting symbol_conf.full_paths to true when marking the DSOs with hits in 'perf buildid-list --with-hits', as used by 'perf archive' Right fix longer term is to shorten the path only at presentation time. Will be done for 2.6.36. Reported-by: Stephane Eranian <eranian@google.com> Tested-by: Stephane Eranian <eranian@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100601183837.GC4093@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-01perf scripts python: Give field dict to unhandled callbackPierre Tardy
trace_unhandled() callback does not allow to access event fields, this patch resolves the problem. It can also been used as a more pythonic and flexible way for script writters to demux event types This will for example greatly simplify pytimechart event demux. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu>, Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <1275340329-2397-1-git-send-email-tardyp@gmail.com> Signed-off-by: Pierre Tardy <tardyp@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-01perf hist: fix objdump output parsingKonstantin Stepanyuk
hist_entry__annotate() runs objdump with -S option so the output may contain lines of any format. If a line starts with a colon strtoull() returns 0 and calculated offset will be negative. This causes perf annotate segfaults. Make sure that strtoull() has parsed at least one digit. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Konstantin Stepanyuk <konstantin.stepanyuk@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-01perf-record: Check correct pid when forkingBorislav Petkov
When forking the child to be traced, we should check the correct return value from fork() and not a local variable which is otherwise unused. Signed-off-by: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <20100531211818.GA30175@liondog.tnic> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-06-01perf: Do the comm inheritance per thread in event__process_taskFrederic Weisbecker
event__process_task() doesn't propagate the comm copy on clone, but only on process fork. So we loose all the tid:comm resolution for tasks that aren't a main process thread. Progragate the per thread granularity to event__process_task for pid resolution. This fixes various unresolved pids in perf sched, especially when we trace multithread processes. The problem is quickly reproducible with the messaging benchmark using the multithread mode "-t" : perf sched record perf bench sched messaging -t Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Stephane Eranian <eranian@google.com>
2010-06-01perf: Use event__process_task from perf schedFrederic Weisbecker
perf sched uses event__process_comm(), which means it can resolve comms from: - tasks that have exec'ed (kernel comm events) - tasks that were running when perf record started the actual recording (synthetized comm events) But perf sched can't resolve the pids of tasks that were created after the recording started. To solve this, we need to inherit the comms on fork events using event__process_task(). This fixes various unresolved pids in perf sched, easily visible with: perf sched record perf bench sched messaging Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Stephane Eranian <eranian@google.com>
2010-05-31perf: Process comm events by tidFrederic Weisbecker
When we synthetize the existing running tasks though procfs, we walk through every threads of a process, queuing one comm events per tid. But then on report time, event__process_comm() only creates and sets the comm on a per process granularity. This is the right thing for comm events that came from the kernel, as they are only created on exec. Sub-threads then inherit their comm from fork events. But that doesn't work with our synthetized comm events taken from procfs informations as the per thread granularity is done on comm events directly there. Hence we need event__process_comm() to work with the tid rather than the pid. It won't change anything for comm events coming from the kernel but this will fix the synthetized ones. Before: $ ./perf report -D | grep COMM | grep firefox 0x2c7b8 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c7d0 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c7e8 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c800 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c818 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c830 [0x18]: PERF_RECORD_COMM: firefox:5297 After: $ ./perf report -D | grep COMM | grep firefox 0x2c7b8 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c7d0 [0x18]: PERF_RECORD_COMM: firefox:5299 0x2c7e8 [0x18]: PERF_RECORD_COMM: firefox:5300 0x2c800 [0x18]: PERF_RECORD_COMM: firefox:5308 0x2c818 [0x18]: PERF_RECORD_COMM: firefox:5309 0x2c830 [0x18]: PERF_RECORD_COMM: firefox:5312 This fixes various unresolved pid on perf sched. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Stephane Eranian <eranian@google.com>
2010-05-30Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tui: Fix last use_browser problem related to .perfconfig perf symbols: Add the build id cache to the vmlinux path perf tui: Reset use_browser if stdout is not a tty ring-buffer: Move zeroing out excess in page to ring buffer code ring-buffer: Reset "real_end" when page is filled
2010-05-27Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits) tracing: Add __used annotation to event variable perf, trace: Fix !x86 build bug perf report: Support multiple events on the TUI perf annotate: Fix up usage of the build id cache x86/mmiotrace: Remove redundant instruction prefix checks perf annotate: Add TUI interface perf tui: Remove annotate from popup menu after failure perf report: Don't start the TUI if -D is used perf: Fix getline undeclared perf: Optimize perf_tp_event_match() perf: Remove more code from the fastpath perf: Optimize the !vmalloc backed buffer perf: Optimize perf_output_copy() perf: Fix wakeup storm for RO mmap()s perf-record: Share per-cpu buffers perf-record: Remove -M perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig ...
2010-05-27perf tui: Fix last use_browser problem related to .perfconfigArnaldo Carvalho de Melo
When we moved to using ~/.perfconfig to set the value of use_browser, it changed from a boolean to an int so that the convention used for use_pager was followed. That convention is: -1: unspecified, that is what use_{browser,pager} is initialized 0: Don't use the browser (should be TUI), because was explicitely set to 0/off/false on ~/.perfconfig [tui] cmd =, or because we're redirecting the stdout to a file or piping it to some other command (!isatty()). 1: Use the TUI Some code was not properly audited and continued testing it as a boolean, this seems to be the last one. Reported-by: Frédéric Weisbecker <fweisbec@gmail.com> Tested-by: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-26perf symbols: Add the build id cache to the vmlinux pathArnaldo Carvalho de Melo
So that if the kernel DSO has a build id because record inserted it in the perf.data build id table in the header, or a BUILD_ID event was inserted in the stream, we first look at the build id cache ($HOME/.debug/). If we find it there, try to use it, allowing offline annotation in addition to 'perf report'. Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-26perf tui: Reset use_browser if stdout is not a ttyArnaldo Carvalho de Melo
The newt initialization routines weren't being called because the output was a file (perf annotate > /tmp/bla) but use_browser was still 1, because ~/.perfconfig had it as 'on', so, later on newt routines segfaulted. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-23perf report: Support multiple events on the TUIArnaldo Carvalho de Melo
The hists__tty_browse_tree function was created with the loop to print all events, and its equivalent, hists__tui_browse_tree, was created in a similar fashion, where it is possible to switch among the multiple events, if present, using TAB to go the next event, and shift+TAB (UNTAB) to go to the previous. The report TUI now shows as the window title the name of the event and a leak was fixed wrt pstacks. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-23perf annotate: Fix up usage of the build id cacheArnaldo Carvalho de Melo
It was assuming that the cache was always available and also wasn't checking if the file found in the build id cache was just a kallsyms file, that is not supported by objdump for disassembly. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-22perf annotate: Add TUI interfaceArnaldo Carvalho de Melo
When annotating multiple entries, for instance, when running simply as: $ perf annotate the right and left keys, as well as TAB can be used to cycle thru the multiple symbols being annotated. If one doesn't like TUI annotate, disable it by editing ~/.perfconfig and adding: [tui] annotate = off Just like it is possible for report. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-22perf tui: Remove annotate from popup menu after failureArnaldo Carvalho de Melo
Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-21perf report: Don't start the TUI if -D is usedArnaldo Carvalho de Melo
One day we'll have support for the "dump raw trace in ASCII" in the TUI frontend, but till then, use the tty code. Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-21perf: Fix getline undeclaredFrederic Weisbecker
We need to have stdio.h included with _GNU_SOURCEfopr getline, which is broken with the inclusion of build-id.h. Keep util.h included first in hist.c Fixes: util/hist.c: Dans la fonction «hist_entry__parse_objdump_line» : util/hist.c:938: attention : déclaration implicite de la fonction « «getline» » util/hist.c:938: attention : nested extern declaration of «getline» make: *** [util/hist.o] Erreur 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1274438919-5104-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21perf-record: Share per-cpu buffersPeter Zijlstra
It seems a waste of space to create a buffer per event, share it per-cpu. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20100521090710.634824884@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21perf-record: Remove -MPeter Zijlstra
Since it is not allowed to create cross-cpu (or cross-task) buffers, this option is no longer valid. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20100521090710.582740993@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21Merge branch 'perf' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits) USB: remove unused usb_buffer_alloc and usb_buffer_free macros usb: musb: update gfp/slab.h includes USB: ftdi_sio: fix legacy SIO-device header USB: kl5usb105: reimplement using generic framework USB: kl5usb105: minor clean ups USB: kl5usb105: fix memory leak USB: io_ti: use kfifo to implement write buffering USB: io_ti: remove unsused private counter USB: ti_usb: use kfifo to implement write buffering USB: ir-usb: fix incorrect write-buffer length USB: aircable: fix incorrect write-buffer length USB: safe_serial: straighten out read processing USB: safe_serial: reimplement read using generic framework USB: safe_serial: reimplement write using generic framework usb-storage: always print quirks USB: usb-storage: trivial debug improvements USB: oti6858: use port write fifo USB: oti6858: use kfifo to implement write buffering USB: cypress_m8: use kfifo to implement write buffering USB: cypress_m8: remove unused drain define ... Fix up conflicts (due to usb_buffer_alloc/free renaming) in drivers/input/tablet/acecad.c drivers/input/tablet/kbtab.c drivers/input/tablet/wacom_sys.c drivers/media/video/gspca/gspca.c sound/usb/usbaudio.c
2010-05-20perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfigArnaldo Carvalho de Melo
Using the same scheme as for git's/perf's pager setup, i.e. if one doesn't want to, on a newt enabled perf binary, to disable the TUI for 'perf report', its just a matter of doing: [root@doppio linux-2.6-tip]# printf "[tui]\n\nreport = off\n" > /root/.perfconfig [root@doppio linux-2.6-tip]# cat /root/.perfconfig [tui] report = off [root@doppio linux-2.6-tip]# System wide settings are also possible, by editing /etc/perfconfig, etc, i.e. the git machinery for config files applies to perf as well, so when in doubt where to put your settings, consult the git documentation, if it fails, please let us know. Suggested-by: Ingo Molnar <mingo@elte.hu> Discussed-with: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20perf record: remove unneeded gettimeofday() callRuss Anderson
Perf record repeatedly calls gettimeofday() which adds noise to the performance measurements. Since gettimeofday() is only used for the error printf, delete it. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <20100518225240.GC25589@sgi.com> Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20USB: testusb: testusb compatibility with FunctionFS gadgetMichal Nazarewicz
The FunctionFS gadget may provide the source/sink interface not as the first interface (with id == 0) but some different interface hence a code to find the interface number is required. (Note that you will still configure the gadget to report idProduct == 0xa4a4 (an "echo 0xa4a4 >/sys/module/g_ffs/parameters/usb_product" should suffice) or configure host to handle 0x0525:0xa4ac devices using the usbtest driver.) Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: testusb: an USB testing applicationDavid Brownell
The testusb program just issues ioctls to perform the tests implemented by the kernel driver. It can generate a variety of transfer patterns; you should make sure to test both regular streaming and mixes of transfer sizes (including short transfers). For more information on how this can be used and on USB testing refer to <URL:http://www.linux-usb.org/usbtest/>. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ffs-test: FunctionFS testing programMichal Nazarewicz
This adds an example user-space FunctionFS driver which implements a source/sink interface used for testing. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20perf annotate: Use build-ids to find the right DSOArnaldo Carvalho de Melo
We were still using the pathname found on the MMAP event, that could not be the one we used when recording, so use the build-id cache for that, only falling back to use the pathname in the MMAP event if no build-ids are available. With this we now also are able to do secure, seamless offline annotation. Example: [root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10 8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges 4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba 3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints [root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand [root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0 bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0 [root@doppio linux-2.6-tip]# Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20perf TUI: Make 'space' be an alias to 'PgDn'Arnaldo Carvalho de Melo
Just like if one is using the stdio based pager, or more/less, for that matter. Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20Merge branch 'perf/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
2010-05-20perf: Fix unaligned accesses while fetching trace valuesFrederic Weisbecker
Accessing trace values of an 8 size may end up in a segfault on archs that can't deal with misaligned access, which is the case for sparc 64. This is because PERF_SAMPLE_RAW are aligned to 4 and not to 8. Fix this on the macros that get the values of 8 size. This fixes segfaults on perf tools in sparc 64. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: David Miller <davem@davemloft.net>
2010-05-20perf: Use read() instead of lseek() in trace_event_read.c:skip()Tom Zanussi
This is a small fix for a problem affecting live-mode, introduced recently: root@tropicana:~# perf trace rwtop perf trace started with Perl script /root/libexec/perf-core/scripts/perl/rwtop.pl Fatal: did not read header event commit d00a47cce569a3e660a8c9de5d57af28d6a9f0f7 added a skip() function to skip over e.g. header_page, but this doesn't work for live mode. This patch re-implements skip() to use read() instead of lseek() to fix that. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1273032130.6383.28.camel@tropicana> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-19perf session: Make read_build_id routines look at the host_machine tooArnaldo Carvalho de Melo
The changes made to support host and guest machines in a session, that started when the 'perf kvm' tool was introduced ended up introducing a bug where the host_machine was not having its DSOs traversed for build-id processing. Fix it by moving some methods to the right classes and considering the host_machine when processing build-ids. Reported-by: Tom Zanussi <tzanussi@gmail.com> Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-19perf symbols: Don't try to read the build-id twiceArnaldo Carvalho de Melo
In __dsos__read_build_ids if the dso already had its build-id read, don't try again. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-18perf tools: remove xstrndup, xmalloc, xzallocArnaldo Carvalho de Melo
All the functions that call this can handle the equivalent, non panic'ing wrapped routines. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-18perf probe: Don't call die()Arnaldo Carvalho de Melo
Functions that were calling xzalloc also returned -1 when, for other reasons, it could fail, and the calleds are coping with failures, so stop using die() and xzalloc(). Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-18perf probe: Fix some error exit pathsArnaldo Carvalho de Melo
That could leave filedescriptors open and leak memory. Also stop using xmalloc, use malloc and handle results just like other error cases in the same routine that used it. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-18perf tools: Remove some unused functionsArnaldo Carvalho de Melo
Without the bloated cplus_demangle from binutils, i.e building with: $ make NO_DEMANGLE=1 O=~acme/git/build/perf -j3 -C tools/perf/ install Before: text data bss dec hex filename 471851 29280 4025056 4526187 45106b /home/acme/bin/perf After: [acme@doppio linux-2.6-tip]$ size ~/bin/perf text data bss dec hex filename 446886 29232 4008576 4484694 446e56 /home/acme/bin/perf So its a 5.3% size reduction in code, but the interesting part is in the git diff --stat output: 19 files changed, 20 insertions(+), 1909 deletions(-) If we ever need some of the things we got from git but weren't using, we just have to go to the git repo and get fresh, uptodate source code bits. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-18perf stat: add perf stat -B to pretty print large numbersStephane Eranian
It is hard to read very large numbers so provide an option to perf stat to separate thousands using a separator. The patch leverages the locale support of stdio. You need to set your LC_NUMERIC appropriately, for instance LC_NUMERIC=en_US.UTF8. You need to pass -B to activate this feature. This way existing scripts parsing the output do not need to be changed. Here is an example. $ perf stat noploop 2 noploop for 2 seconds Performance counter stats for 'noploop 2': 1998.347031 task-clock-msecs # 0.998 CPUs 61 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 118 page-faults # 0.000 M/sec 4,138,410,900 cycles # 2070.917 M/sec (scaled from 70.01%) 2,062,650,268 instructions # 0.498 IPC (scaled from 70.01%) 2,057,653,466 branches # 1029.678 M/sec (scaled from 70.01%) 40,267 branch-misses # 0.002 % (scaled from 30.04%) 2,055,961,348 cache-references # 1028.831 M/sec (scaled from 30.03%) 53,725 cache-misses # 0.027 M/sec (scaled from 30.02%) 2.001393933 seconds time elapsed $ perf stat -B noploop 2 noploop for 2 seconds Performance counter stats for 'noploop 2': 1998.297883 task-clock-msecs # 0.998 CPUs 59 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 119 page-faults # 0.000 M/sec 4,131,380,160 cycles # 2067.450 M/sec (scaled from 70.01%) 2,059,096,507 instructions # 0.498 IPC (scaled from 70.01%) 2,054,681,303 branches # 1028.216 M/sec (scaled from 70.01%) 25,650 branch-misses # 0.001 % (scaled from 30.05%) 2,056,283,014 cache-references # 1029.017 M/sec (scaled from 30.03%) 47,097 cache-misses # 0.024 M/sec (scaled from 30.02%) 2.001391016 seconds time elapsed Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4bf28fe8.914ed80a.01ca.fffff5f5@mx.google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-18Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits) perf tools: Add mode to build without newt support perf symbols: symbol inconsistency message should be done only at verbose=1 perf tui: Add explicit -lslang option perf options: Type check all the remaining OPT_ variants perf options: Type check OPT_BOOLEAN and fix the offenders perf options: Check v type in OPT_U?INTEGER perf options: Introduce OPT_UINTEGER perf tui: Add workaround for slang < 2.1.4 perf record: Fix bug mismatch with -c option definition perf options: Introduce OPT_U64 perf tui: Add help window to show key associations perf tui: Make <- exit menus too perf newt: Add single key shortcuts for zoom into DSO and threads perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed perf newt: Fix the 'A'/'a' shortcut for annotate perf newt: Make <- exit the ui_browser x86, perf: P4 PMU - fix counters management logic perf newt: Make <- zoom out filters perf report: Report number of events, not samples perf hist: Clarify events_stats fields usage ... Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
2010-05-18perf tui: Fix build problem with slang <= 2.0.6Arnaldo Carvalho de Melo
slang versions <= 2.0.6 have a "#if HAVE_LONG_LONG" that breaks the build if it isn't defined. Use the equivalent one that glibc has on features.h. Reported-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-17perf probe: Don't compile CFI related code if elfutils is oldMasami Hiramatsu
Check elfutils version, and if it is old don't compile CFI analysis code. This allows to compile perf with old elfutils. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Tested-by: Stephane Eranian <eranian@google.com> Reported-by: Robert Richter <robert.richter@amd.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20100510171207.26029.97604.stgit@localhost6.localdomain6> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-17perf tools: Add mode to build without newt supportArnaldo Carvalho de Melo
make NO_NEWT=1 Will avoid building the newt (tui) support. Suggested-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-17perf symbols: symbol inconsistency message should be done only at verbose=1Arnaldo Carvalho de Melo
That happened for an old perf.data file that had no fake MMAP events for the kernel modules, but even then it should warn once for each module, not one time for every symbol in every module not found. Reported-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-17perf tui: Add explicit -lslang optionArnaldo Carvalho de Melo
At least on rawhide using -lnewt is not enough if we use SLang routines directly, so add an explicit -lslang since we use SLang routines. Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-17perf options: Type check all the remaining OPT_ variantsArnaldo Carvalho de Melo
OPT_SET_INT was renamed to OPT_SET_UINT since the only use in these tools is to set something that has an enum type, that is builtin compatible with unsigned int. Several string constifications were done to make OPT_STRING require a const char * type. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-17perf options: Type check OPT_BOOLEAN and fix the offendersArnaldo Carvalho de Melo
Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-17perf options: Check v type in OPT_U?INTEGERArnaldo Carvalho de Melo
To avoid problems like the one fixed by Stephane Eranian in 3de29ca, now we'll got this instead: bench/sched-messaging.c:259: error: negative width in bit-field ‘<anonymous>’ bench/sched-messaging.c:261: error: negative width in bit-field ‘<anonymous>’ Which is rather cryptic, but is how BUILD_BUG_ON_ZERO works, so kernel hackers should be already used to this. With it in place found some problems, fixed by changing the affected variables to sensible types or changed some OPT_INTEGER to OPT_UINTEGER. Next csets will go thru converting each of the remaining OPT_ so that review can be made easier by grouping changes per type per patch. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>