Age | Commit message (Collapse) | Author |
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
BUG_ON(x) should raise an error if x is true, but assert(x) raises an
error if x is false. Remove this bogus definition of BUG_ON(), which
isn't used anyway.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fixes: d38499530e5 ("fs: decouple READ and WRITE from the block layer ops")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fixes: 6da2ec56059 ("treewide: kmalloc() -> kmalloc_array()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fixes: 55e49dc43a8 ("virtio_ring: switch to dma_XX barriers for rpmsg")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This was introduced more than a decade ago when sg chaining was
added, but we never really caught anything with it. The scatterlist
entry size can be critical, since drivers allocate it, so remove
the magic member. Recently it's been triggering allocation stalls
and failures in NVMe.
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This was used by the ide, scsi and networking code in the past to
determine if they should bounce payloads. Now that the dma mapping
always have to support dma to all physical memory (thanks to swiotlb
for non-iommu systems) there is no need to this crude hack any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv)
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
Fixes after recent use of kvmalloc
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull virtio/vhost updates from Michael Tsirkin:
"virtio, vhost: fixes, cleanups, features
This includes the disk/cache memory stats for for the virtio balloon,
as well as multiple fixes and cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: don't hold onto file pointer for VHOST_SET_LOG_FD
vhost: don't hold onto file pointer for VHOST_SET_VRING_ERR
vhost: don't hold onto file pointer for VHOST_SET_VRING_CALL
ringtest: ring.c malloc & memset to calloc
virtio_vop: don't kfree device on register failure
virtio_pci: don't kfree device on register failure
virtio: split device_register into device_initialize and device_add
vhost: remove unused lock check flag in vhost_dev_cleanup()
vhost: Remove the unused variable.
virtio_blk: print capacity at probe time
virtio: make VIRTIO a menuconfig to ease disabling it all
virtio/ringtest: virtio_ring: fix up need_event math
virtio/ringtest: fix up need_event math
virtio: virtio_mmio: make of_device_ids const.
firmware: Use PTR_ERR_OR_ZERO()
virtio-mmio: Use PTR_ERR_OR_ZERO()
vhost/scsi: Improve a size determination in four functions
virtio_balloon: include disk/file caches memory statistics
|
|
Code cleanup change - moving from malloc & memset to calloc.
Signed-off-by: Peter Malone <peter.malone@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
last kicked event index must be updated unconditionally:
even if we don't need to kick, we do not want to re-check
the same entry for events.
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
|
|
last kicked event index must be updated unconditionally:
even if we don't need to kick, we do not want to re-check
the same entry for events.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Offset 128 overlaps the last word of the redzone.
Use 132 which is always beyond that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is to make ptr_ring test build again.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't rely on lockless guarantees, but it
seems cleaner than inverting __ptr_ring_peek.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull virtio regression fixes from Michael Tsirkin:
"Fixes two issues in the latest kernel"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_mmio: fix devm cleanup
ptr_ring: fix up after recent ptr_ring changes
|
|
Add more stubs to make it build.
Fixes: 81fbfe8a ("ptr_ring: use kmalloc_array()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
MFENCE appears to be way slower than a locked instruction - let's use
LOCK ADD unconditionally, as we always did on old 32-bit.
Performance testing results:
perf stat -r 10 -- ./virtio_ring_0_9 --sleep --host-affinity 0 --guest-affinity 0
Before:
0.922565990 seconds time elapsed ( +- 1.15% )
After:
0.578667024 seconds time elapsed ( +- 1.21% )
i.e. about ~60% faster.
Just poking at SP would be the most natural, but if we then read the
value from SP, we get a false dependency which will slow us down.
This was noted in this article:
http://shipilev.net/blog/2014/on-the-fence-with-dependencies/
And is easy to reproduce by sticking a barrier in a small non-inline
function.
So let's use a negative offset - which avoids this problem since we
build with the red zone disabled.
For userspace, use an address just below the redzone.
The one difference between LOCK ADD and MFENCE is that LOCK ADD does
not affect CLFLUSH, previous patches converted all uses of CLFLUSH to
call mb(), such that changes to smp_mb() won't affect it.
Update mb/rmb/wmb() on 32-bit to use the negative offset, too, for
consistency.
As a follow-up, it might be worth considering switching users
of CLFLUSH to another API (e.g. clflush_mb()?) - we will
then be able to convert mb() to smp_mb() again.
Also arguably, GCC should switch to use LOCK ADD for __sync_synchronize().
This might be worth pursuing separately.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: qemu-devel@nongnu.org
Cc: virtualization@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1509118355-4890-1-git-send-email-mst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
trivial fix to spelling mistake in an error message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Use the param flag for that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add a new flag for passing test-specific parameters.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Previous commit ("virtio: add context flag to find vqs")
added a new 'context' flag to vring_new_virtqueue(), but the
corresponding API in tools/virtio/ is not updated causing
build errors due to conflicting declarations.
Bring code in tools/virtio in sync with that in kernel.
I have used 'false' for the value of the new boolean 'context'
flag as that seems to be the best way to preserve existing
behavior.
Tested with:
$ make -C tools/virtio clean all ARCH=x86
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
There is an || vs && typo so the assert can never be triggered.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Make ringtest work on s390 too.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
Since ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work
without /dev/cpu") run-on-all.sh uses seq 0 $HOST_AFFINITY as the list
of ids of the CPUs to run the command on (assuming ids of online CPUs
are consecutive and start from 0), where $HOST_AFFINITY is the highest
CPU id in the system previously determined using lscpu. This can fail
on systems with offline CPUs.
Instead let's use lscpu to determine the list of online CPUs.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work without
/dev/cpu")
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
As a step towards killing off ACCESS_ONCE, use {READ,WRITE}_ONCE() for the
virtio tools uaccess primitives, pulling these in from <linux/compiler.h>.
With this done, we can kill off the now-unused ACCESS_ONCE() definition.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
|
|
The virtio tools implementation of READ_ONCE() has a single parameter called
'var', but erroneously refers to 'val' for its cast, and thus won't work unless
there's a variable of the correct type that happens to be called 'var'.
Fix this with s/var/val/, making READ_ONCE() work as expected regardless.
Fixes: a7c490333df3cff5 ("tools/virtio: use virt_xxx barriers")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
|
|
Updating the event index has a memory barrier and causes more work
on the other side to actually signal the event. It is unnecessary
if a new buffer has already appeared on the ring, so poll once before
doing the update.
The effect of this on the 0.9 ring implementation is pretty much
invisible, but on the new-style ring it provides a consistent 3%
performance improvement.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Provide new primitives used_empty/avail_empty and
build poll_avail/poll_used on top of it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
By using -flto and -fwhole-program, all functions from the ring implementation
can be treated as static and possibly inlined. Force this to happen through
the GCC flatten attribute.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fixes build after recent IOMMU-related changes,
mustly by adding more stubs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Recent changes to ptr_ring broke the ringtest
which lacks a likely() stub. Fix it up.
Fixes: 982fb490c298896d15e9323a882f34a57c11ff56
("ptr_ring: support zero length ring")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Sometimes, we need support resizing multiple queues at once. This is
because it was not easy to recover to recover from a partial failure
of multiple queues resizing.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several cases of overlapping changes, except the packet scheduler
conflicts which deal with the addition of the free list parameter
to qdisc_enqueue().
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ringtest based unit test for ptr ring.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Useful to measure testing framework overhead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
/dev/cpu is only available on x86 with certain modules (e.g. msr) enabled.
Using lscpu to get processors count is more portable.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Having typical usage example in the README file is more convinient than in
the git history...
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
just a stub pointer for now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
skips ring accesses but drops out of order support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_ring currently sends the device (usually a hypervisor)
physical addresses of its I/O buffers. This is okay when DMA
addresses and physical addresses are the same thing, but this isn't
always the case. For example, this never works on Xen guests, and
it is likely to fail if a physical "virtio" device ever ends up
behind an IOMMU or swiotlb.
The immediate use case for me is to enable virtio on Xen guests.
For that to work, we need vring to support DMA address translation
as well as a corresponding change to virtio_pci or to another
driver.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This adds micro-benchmarks useful for tuning virtio ring layouts.
Three layouts are currently implemented:
- virtio 0.9 compatible one
- an experimental extension bypassing the ring index, polling ring
itself instead
- an experimental extension bypassing avail and used ring completely
Typical use:
sh run-on-all.sh perf stat -r 10 --log-fd 1 -- ./ring
It doesn't depend on the kernel directly, but it's handy
to have as much virtio stuff as possible in one tree.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix build after API changes.
Reported-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
commit cf561f0d2eb74574ad9985a2feab134267a9d298 ("virtio: introduce
virtio_is_little_endian() helper") changed byteswap logic to
skip feature bit checks for LE platforms, but didn't
update tools/virtio, so vring_bench started failing.
Update the copy under tools/virtio/ (TODO: find a way to avoid this code
duplication).
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Makes them more generally available.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
more stubs, mostly
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|