summaryrefslogtreecommitdiffstats
path: root/tools/testing
AgeCommit message (Collapse)Author
2014-11-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) sunhme driver lacks DMA mapping error checks, based upon a report by Meelis Roos. 2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee. 3) DMA memory allocation sizes are wrong in systemport ethernet driver, fix from Florian Fainelli. 4) Fix use after free in mac80211 defragmentation code, from Johannes Berg. 5) Some networking uapi headers missing from Kbuild file, from Stephen Hemminger. 6) TUN driver gets csum_start offset wrong when VLAN accel is enabled, and macvtap has a similar bug, from Herbert Xu. 7) Adjust several tunneling drivers to set dev->iflink after registry, because registry sets that to -1 overwriting whatever we did. From Steffen Klassert. 8) Geneve forgets to set inner tunneling type, causing GSO segmentation to fail on some NICs. From Jesse Gross. 9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and Giuseppe CAVALLARO. 10) Fix spurious timeouts with NewReno on low traffic connections, from Marcelo Leitner. 11) Fix descriptor updates in enic driver, from Govindarajulu Varadarajan. 12) PPP calls bpf_prog_create() with locks held, which isn't kosher. Fix from Takashi Iwai. 13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel Borkmann. 14) psock_fanout selftest accesses past the end of the mmap ring, fix from Shuah Khan. 15) Fix PTP timestamping for VLAN packets, from Richard Cochran. 16) netlink_unbind() calls in netlink pass wrong initial argument, from Hiroaki SHIMODA. 17) vxlan socket reuse accidently reuses a socket when the address family is different, so we have to explicitly check this, from Marcelo Lietner. 18) Fix missing include in nft_reject_bridge.c breaking the build on ppc and other architectures, from Guenter Roeck. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) vxlan: Do not reuse sockets for a different address family smsc911x: power-up phydev before doing a software reset. lib: rhashtable - Remove weird non-ASCII characters from comments net/smsc911x: Fix delays in the PHY enable/disable routines net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode netlink: Properly unbind in error conditions. net: ptp: fix time stamp matching logic for VLAN packets. cxgb4 : dcb open-lldp interop fixes selftests/net: psock_fanout seg faults in sock_fanout_read_ring() net: bcmgenet: apply MII configuration in bcmgenet_open() net: bcmgenet: connect and disconnect from the PHY state machine net: qualcomm: Fix dependency ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx net: phy: Correctly handle MII ioctl which changes autonegotiation. ipv6: fix IPV6_PKTINFO with v4 mapped net: sctp: fix memory leak in auth key management net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet net: ppp: Don't call bpf_prog_create() in ppp_lock net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set cxgb4 : Fix bug in DCB app deletion ...
2014-11-11selftests/net: psock_fanout seg faults in sock_fanout_read_ring()Shuah Khan
The while loop in sock_fanout_read_ring() checks mmap region bounds after access, causing it to segfault. Fix it to check count before accessing header->tp_status. This problem can be reproduced consistently when the test in run as follows: make -C tools/testing/selftests TARGETS=net run_tests or make run_tests from tools/testing/selftests or make run_test from tools/testing/selftests/net Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04Merge tag 'ftracetest-3.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftracetest fix from Steven Rostedt: "Running the ftracetests on a machine that had the debugfs file system mounted in two locations caused the ftracetests to fail. This is because the ftracetests script does a grep of the /proc/mounts file to find where the debugfs file system is mounted. If it is mounted twice, then the grep returns two lines instead of just one. This causes the ftracetests to get confused and fail. Use "head -1" to only return the first mount point for debugfs" * tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftracetest: Take the first debugfs mount found
2014-11-03ftracetest: Take the first debugfs mount foundSteven Rostedt (Red Hat)
Running ftracetests on a box that mounted debugfs in two locations made the ftracetests fail. This is because the tests uses a grep of debugfs from the /proc/mounts file to find the debugfs mount point, and then appends "/tracing" to that string to get the tracing directory. If the debugfs directory is mounted twice, then that grep will return two answers and appending "/tracing" to a string with two lines will not work. Use "head -1" to only take the first mount point found. Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-13Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes in this cycle were: - changes related to No-CBs CPUs and NO_HZ_FULL - RCU-tasks implementation - torture-test updates - miscellaneous fixes - locktorture updates - RCU documentation updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits) workqueue: Use cond_resched_rcu_qs macro workqueue: Add quiescent state between work items locktorture: Cleanup header usage locktorture: Cannot hold read and write lock locktorture: Fix __acquire annotation for spinlock irq locktorture: Support rwlocks rcu: Eliminate deadlock between CPU hotplug and expedited grace periods locktorture: Document boot/module parameters rcutorture: Rename rcutorture_runnable parameter locktorture: Add test scenario for rwsem_lock locktorture: Add test scenario for mutex_lock locktorture: Make torture scripting account for new _runnable name locktorture: Introduce torture context locktorture: Support rwsems locktorture: Add infrastructure for torturing read locks torture: Address race in module cleanup locktorture: Make statistics generic locktorture: Teach about lock debugging locktorture: Support mutexes locktorture: Add documentation ...
2014-10-12Merge tag 'kselftest-3.18-updates-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - fix for missing arguments to printf - fix to build failures on 32-bit systems. - enhancement to run memfd_test run on all architectures as most architectures support __NR_memfd_create * tag 'kselftest-3.18-updates-1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/memfd: Run test on all architectures memfd_test: Add missing argument to printf() memfd_test: Make it work on 32-bit systems
2014-10-12Merge tag 'ftracetest-3.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace test code from Steven Rostedt: "This patch series starts a new selftests section in the tools/testing/selftest directory called "ftrace" that holds tests aimed at testing ftrace and subsystems that use ftrace (like kprobes). So far only a few tests were written (by Masami Hiramatsu), but more will be added in the near future (3.19)" * tag 'ftracetest-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Add selftest scripts testing kprobe-tracer as startup test ftracetest: Add POSIX.3 standard and XFAIL result codes ftracetest: Add kprobe basic testcases ftracetest: Add ftrace basic testcases ftracetest: Initial commit for ftracetest
2014-10-12Merge tag 'ktest-v3.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest update from Steven Rostedt: "A fix and a clean up to ktest, as well as two small features. - A way to allow users to skip a manual bisect. - Allowing cherry picked patches to be tested. The cherry pick worked for a test I needed, but stressing it may not have all the desired effects. It doesn't cause any regressions so I kept it in" * tag 'ktest-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Don't bother with bisect good or bad on replay ktest: Fix check for new kernel success on rebooting to good kernel ktest: add ability to skip during BISECT_MANUAL ktest: Add PATCHCHECK_CHERRY
2014-10-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "Here's a first pull request for powerpc updates for 3.18. The bulk of the additions are for the "cxl" driver, for IBM's Coherent Accelerator Processor Interface (CAPI). Most of it's in drivers/misc, which Greg & Arnd maintain, Greg said he was happy for us to take it through our tree. There's the usual minor cleanups and fixes, including a bit of noise in drivers from some of those. A bunch of updates to our EEH code, which has been getting more testing. Several nice speedups from Anton, including 20% in clear_page(). And a bunch of updates for freescale from Scott" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (130 commits) cxl: Fix afu_read() not doing finish_wait() on signal or non-blocking cxl: Add documentation for userspace APIs cxl: Add driver to Kbuild and Makefiles cxl: Add userspace header file cxl: Driver code for powernv PCIe based cards for userspace access cxl: Add base builtin support powerpc/mm: Add hooks for cxl powerpc/opal: Add PHB to cxl mode call powerpc/mm: Add new hash_page_mm() powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts cxl: Add new header for call backs and structs powerpc/powernv: Split out set MSI IRQ chip code powerpc/mm: Export mmu_kernel_ssize and mmu_linear_psize powerpc/msi: Improve IRQ bitmap allocator powerpc/cell: Make spu_flush_all_slbs() generic powerpc/cell: Move data segment faulting code out of cell platform powerpc/cell: Move spu_handle_mm_fault() out of cell platform powerpc/pseries: Use new defines when calling H_SET_MODE powerpc: Update contact info in Documentation files powerpc/perf/hv-24x7: Simplify catalog_read() ...
2014-10-09selftests/vm/transhuge-stress: stress test for memory compactionKonstantin Khlebnikov
This tool induces memory fragmentation via sequential allocation of transparent huge pages and splitting off everything except their last sub-pages. It easily generates pressure to the memory compaction code. $ perf stat -e 'compaction:*' -e 'migrate:*' ./transhuge-stress transhuge-stress: allocate 7858 transhuge pages, using 15716 MiB virtual memory and 61 MiB of ram transhuge-stress: 1.653 s/loop, 0.210 ms/page, 9504.828 MiB/s 7858 succeed, 0 failed, 2439 different pages transhuge-stress: 1.537 s/loop, 0.196 ms/page, 10226.227 MiB/s 7858 succeed, 0 failed, 2364 different pages transhuge-stress: 1.658 s/loop, 0.211 ms/page, 9479.215 MiB/s 7858 succeed, 0 failed, 2179 different pages transhuge-stress: 1.617 s/loop, 0.206 ms/page, 9716.992 MiB/s 7858 succeed, 0 failed, 2421 different pages ^C./transhuge-stress: Interrupt Performance counter stats for './transhuge-stress': 1.744.051 compaction:mm_compaction_isolate_migratepages 1.014 compaction:mm_compaction_isolate_freepages 1.744.051 compaction:mm_compaction_migratepages 1.647 compaction:mm_compaction_begin 1.647 compaction:mm_compaction_end 1.744.051 migrate:mm_migrate_pages 0 migrate:mm_numa_migrate_ratelimit 7,964696835 seconds time elapsed Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09Merge branch 'rcu/next' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull additional commits for locktorture, from Paul E. McKenney. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-08tracing/kprobes: Add selftest scripts testing kprobe-tracer as startup testMasami Hiramatsu
Add two selftest scripts which tests kprobe-tracer as the startup selftest does. These test cases are testing that the kprobe_event can accept a kprobe event with $stack related arguments and a kretprobe event with $retval argument. Link: http://lkml.kernel.org/p/20141008040307.13415.45145.stgit@kbuild-f20.novalocal Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-07ktest: Don't bother with bisect good or bad on replaySteven Rostedt (Red Hat)
If git bisect reply is being used in the bisect tests, don't bother doing the git bisect good or git bisect bad calls. The git bisect reply will override them anyway, and that's called immediately after the other two. Going the git bisect (good|bad) is just a waste of time. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-07ktest: Fix check for new kernel success on rebooting to good kernelSteven Rostedt (Red Hat)
The reboot function when rebooting back to a good kernel has a check to make sure that a new kernel was indeed booted. But that check uses a timeout value, which when calling the monitor will still return success if the timeout is hit (no bug was found). It should return an error to let the reboot code know that a new kernel was not reached. Only the reboot code checks the return value of the monitor. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-03ftracetest: Add POSIX.3 standard and XFAIL result codesMasami Hiramatsu
Add XFAIL and POSIX 1003.3 standard codes (UNRESOLVED/ UNTESTED/UNSUPPORTED) as result codes. These are used for the results that test case is expected to fail or unsupported feature (by config). To return these result code, this introduces exit_unresolved, exit_untested, exit_unsupported and exit_xfail functions, which use real-time signals to notify the result code to ftracetest. This also set "errexit" option for the testcases, so that the tests don't need to exit explicitly. Note that if the test returns UNRESOLVED/UNSUPPORTED/FAIL, its test log including executed commands is shown on console and main logfile as below. ------ # ./ftracetest samples/ === Ftrace unit tests === [1] failure-case example [FAIL] execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/fail.tc + . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/fail.tc ++ cat non-exist-file cat: non-exist-file: No such file or directory [2] pass-case example [PASS] [3] unresolved-case example [UNRESOLVED] execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unresolved.tc + . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unresolved.tc ++ trap exit_unresolved INT ++ kill -INT 29324 +++ exit_unresolved +++ kill -s 38 29265 +++ exit 0 [4] unsupported-case example [UNSUPPORTED] execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unsupported.tc + . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unsupported.tc ++ exit_unsupported ++ kill -s 40 29265 ++ exit 0 [5] untested-case example [UNTESTED] [6] xfail-case example [XFAIL] # of passed: 1 # of failed: 1 # of unresolved: 1 # of untested: 1 # of unsupported: 1 # of xfailed: 1 # of undefined(test bug): 0 ------ Link: http://lkml.kernel.org/p/20140929120211.30203.99510.stgit@kbuild-f20.novalocal Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-30locktorture: Support rwlocksDavidlohr Bueso
Add a "rw_lock" torture test to stress kernel rwlocks and their irq variant. Reader critical regions are 5x longer than writers. As such a similar ratio of lock acquisitions is seen in the statistics. In the case of massive contention, both hold the lock for 1/10 of a second. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-30selftests/powerpc: Add test of load_unaligned_zero_pad()Michael Ellerman
It is a rarely exercised case, so we want to have a test to ensure it works as required. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-23ftracetest: Add kprobe basic testcasesMasami Hiramatsu
Add basic testcases for kprobe dynamic events. This also shows that the ftracetest accepts sub-directory for new testcases. Link: http://lkml.kernel.org/p/20140922234254.23415.46964.stgit@kbuild-f20.novalocal Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-23ftracetest: Add ftrace basic testcasesMasami Hiramatsu
Add ftrace basic testcases. This just checks ftrace debugfs interface works as it is designed. Link: http://lkml.kernel.org/p/20140922234252.23415.62897.stgit@kbuild-f20.novalocal Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-23ftracetest: Initial commit for ftracetestMasami Hiramatsu
ftracetest is a collection of testcase shell-scripts for ftrace. To avoid regressions of ftrace, these testcases check correct ftrace behaviors. If someone would like to add any features on ftrace, the patch series should have at least one testcase for checking the new behavior. Link: http://lkml.kernel.org/p/20140922234250.23415.68758.stgit@kbuild-f20.novalocal Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-23Merge branch 'rcu/next' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull the v3.18 RCU changes from Paul E. McKenney: " * Update RCU documentation. These were posted to LKML at https://lkml.org/lkml/2014/8/28/378. * Miscellaneous fixes. These were posted to LKML at https://lkml.org/lkml/2014/8/28/386. An additional fix that eliminates a documented (but now inconvenient) deadlock between RCU hotplug and expedited grace periods was posted at https://lkml.org/lkml/2014/8/28/573. * Changes related to No-CBs CPUs and NO_HZ_FULL. These were posted to LKML at https://lkml.org/lkml/2014/8/28/412. * Torture-test updates. These were posted to LKML at https://lkml.org/lkml/2014/8/28/546 and at https://lkml.org/lkml/2014/9/11/1114. * RCU-tasks implementation. These were posted to LKML at https://lkml.org/lkml/2014/8/28/540. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-19ktest: add ability to skip during BISECT_MANUALChris J Arges
When doing a manual bisect, a build can fail or a test can be inconclusive. In these cases it would be helpful to be able to skip the test entirely. Link: http://lkml.kernel.org/r/1409164021-2136-1-git-send-email-chris.j.arges@canonical.com Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-19ktest: Add PATCHCHECK_CHERRYSteven Rostedt (Red Hat)
Add a way to run a patchcheck test on the commits that are in one branch but not in another. This uses git cherry to find a list of commits to test each one with. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-17selftests/memfd: Run test on all architecturesPranith Kumar
Remove the dependence on x86 to run the memfd test. Verfied on 32-bit powerpc. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-09-16rcutorture: Rename rcutorture_runnable parameterPaul E. McKenney
This commit changes rcutorture_runnable to torture_runnable, which is consistent with the names of the other parameters and is a bit shorter as well. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-16locktorture: Add test scenario for rwsem_lockPaul E. McKenney
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-16locktorture: Add test scenario for mutex_lockPaul E. McKenney
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-16locktorture: Make torture scripting account for new _runnable namePaul E. McKenney
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-16Merge branch 'rcu-tasks.2014.09.10a' into HEADPaul E. McKenney
rcu-tasks.2014.09.10a: Add RCU-tasks flavor of RCU.
2014-09-10rcutorture: Add RCU-tasks tests to default rcutorture listPaul E. McKenney
Although the test cases have been added, they must be specified explicitly via the kvm.sh --configs argument in order to run them. This commit therefore adds the RCU-tasks tests to the CFLIST so that they will be run automatically by default. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07rcutorture: Add RCU-tasks test casesPaul E. McKenney
This commit adds the TASKS01 and TASKS02 Kconfig fragments, along with the corresponding TASKS01.boot and TASKS02.boot boot-parameter files specifying that rcutorture test RCU-tasks instead of the default flavor. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07torture: Check for nul bytes in console outputPaul E. McKenney
When starting a new torture run while an old one is still running, both qemu processes can be outputting to the same console.out file. This can cause quite a bit of confusion, so this commit checks for this situation, which is normally indicated by nul bytes in the console output. Yes, if your new run uses up an exact number of blocks of the file, this check will be ineffective, but the odds are not bad. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07torture: Print PID in hung-kernel diagnostic messagePaul E. McKenney
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07rcutorture: Specify CONFIG_CPUMASK_OFFSTACK=y for TREE07Paul E. McKenney
This commit specifies offstack cpumasks in TREE07 in order to catch references to unallocated cpumask_var_t variables. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07rcutorture: Specify MAXSMP=y for TREE01Paul E. McKenney
Setting CONFIG_MAXSMP=y causes cpumasks to be moved offstack, which introduces the possibility of NULL cpumask_var_t pointers. This commit therefore enables CONFIG_MAXSMP=y in TREE01 to increase test coverage. However, because CONFIG_MAXSMP=y implies 8192 CPUs, we need to use the maxcpus= boot parameter to limit the number of CPUs to something reasonable, which in turn requires updating the scripts to handle this. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07rcutorture: Test partial nohz_full= configurationPaul E. McKenney
The current set of tests covers only cases where either all possible CPUs are nohz_full= CPUs or none of them are. Because there have been some recent bug escapes in cases where only some of the CPUs are nohz_full= CPUs, this commit add a configuration where only half of the CPUs are nohz_full= CPUs. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07rcu: Add step to initrd documentationPaul E. McKenney
This commit tries to get people into the correct directory before creating the initrd directory. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07rcutorture: Set executable bit and drop bash from UsagePranith Kumar
This commit sets the executable bit on test scripts config2frag.sh and kvm.sh. Since #!/bin/bash is set in all the scripts, this commit also drops it from all usage lines because the scripts can now all be invoked directly. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07rcutorture: Use bash shell for all the test scriptsPranith Kumar
Some of the scripts encode a default /bin/sh shell. On systems which use dash as default shell, these scripts fail as they are bash scripts. I encountered this while testing the sprintf() changes on a Debian system where dash is the default shell. This commit changes all such uses to use bash explicitly. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-04memfd_test: Add missing argument to printf()Pranith Kumar
Add a missing path argument buf to printf() Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-09-04memfd_test: Make it work on 32-bit systemsPranith Kumar
This test currently fails on 32-bit systems since we use u64 type to pass the flags to fcntl. This commit changes this to use 'unsigned int' type for flags to fcntl making it work on 32-bit systems. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-08-29tools: selftests: fix build issue with make kselftests targetPhong Tran
Fix the typo of ARCH when running 'make kselftests'. Change the 'X86' to 'x86'. Test by compilation. Signed-off-by: Phong Tran <tranmanphong@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace updates from Eric Biederman: "This is a bunch of small changes built against 3.16-rc6. The most significant change for users is the first patch which makes setns drmatically faster by removing unneded rcu handling. The next chunk of changes are so that "mount -o remount,.." will not allow the user namespace root to drop flags on a mount set by the system wide root. Aks this forces read-only mounts to stay read-only, no-dev mounts to stay no-dev, no-suid mounts to stay no-suid, no-exec mounts to stay no exec and it prevents unprivileged users from messing with a mounts atime settings. I have included my test case as the last patch in this series so people performing backports can verify this change works correctly. The next change fixes a bug in NFS that was discovered while auditing nsproxy users for the first optimization. Today you can oops the kernel by reading /proc/fs/nfsfs/{servers,volumes} if you are clever with pid namespaces. I rebased and fixed the build of the !CONFIG_NFS_FS case yesterday when a build bot caught my typo. Given that no one to my knowledge bases anything on my tree fixing the typo in place seems more responsible that requiring a typo-fix to be backported as well. The last change is a small semantic cleanup introducing /proc/thread-self and pointing /proc/mounts and /proc/net at it. This prevents several kinds of problemantic corner cases. It is a user-visible change so it has a minute chance of causing regressions so the change to /proc/mounts and /proc/net are individual one line commits that can be trivially reverted. Unfortunately I lost and could not find the email of the original reporter so he is not credited. From at least one perspective this change to /proc/net is a refgression fix to allow pthread /proc/net uses that were broken by the introduction of the network namespace" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: Point /proc/mounts at /proc/thread-self/mounts instead of /proc/self/mounts proc: Point /proc/net at /proc/thread-self/net instead of /proc/self/net proc: Implement /proc/thread-self to point at the directory of the current thread proc: Have net show up under /proc/<tgid>/task/<tid> NFS: Fix /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes mnt: Add tests for unprivileged remount cases that have found to be faulty mnt: Change the default remount atime from relatime to the existing value mnt: Correct permission checks in do_remount mnt: Move the test for MNT_LOCK_READONLY from change_mount_flags into do_remount mnt: Only change user settable mount flags in remount namespaces: Use task_lock and not rcu to protect nsproxy
2014-08-08selftests: add memfd/sealing page-pinning testsDavid Herrmann
Setting SEAL_WRITE is not possible if there're pending GUP users. This commit adds selftests for memfd+sealing that use FUSE to create pending page-references. FUSE is very helpful here in that it allows us to delay direct-IO operations for an arbitrary amount of time. This way, we can force the kernel to pin pages and then run our normal selftests. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08selftests: add memfd_create() + sealing testsDavid Herrmann
Some basic tests to verify sealing on memfds works as expected and guarantees the advertised semantics. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08tools/testing/selftests/ptrace/peeksiginfo.c: add PAGE_SIZE definitionThierry Fauck
On IBM powerpc where multiple page size value are supported, current ppc64 and ppc64el distro don't define the PAGE_SIZE variable in /usr/include as this is a dynamic value retrieved by the getpagesize() or sysconf() defined in unistd.h. The PAGE_SIZE variable sounds defined when only one value is supported by the kernel. As such, when the PAGE_SIZE definition doesn't exist system should retrieve the dynamic value. Signed-off-by: Thierry Fauck <thierry@linux.vnet.ibm.com> Cc: Andrey Vagin <avagin@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
2014-08-04Merge tag 'driver-core-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the big driver-core pull request for 3.17-rc1. Largest thing in here is the dma-buf rework and fence code, that touched many different subsystems so it was agreed it should go through this tree to handle merge issues. There's also some firmware loading updates, as well as tests added, and a few other tiny changes, the changelog has the details. All have been in linux-next for a long time" * tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) ARM: imx: Remove references to platform_bus in mxc code firmware loader: Fix _request_firmware_load() return val for fw load abort platform: Remove most references to platform_bus device test: add firmware_class loader test doc: fix minor typos in firmware_class README staging: android: Cleanup style issues Documentation: devres: Sort managed interfaces Documentation: devres: Add devm_kmalloc() et al fs: debugfs: remove trailing whitespace kernfs: kernel-doc warning fix debugfs: Fix corrupted loop in debugfs_remove_recursive stable_kernel_rules: Add pointer to netdev-FAQ for network patches driver core: platform: add device binding path 'driver_override' driver core/platform: remove unused implicit padding in platform_object firmware loader: inform direct failure when udev loader is disabled firmware: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN firmware: read firmware size using i_size_read() firmware loader: allow disabling of udev as firmware loader reservation: add suppport for read-only access using rcu reservation: update api and add some helpers ... Conflicts: drivers/base/platform.c
2014-08-04Merge tag 'char-misc-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver patches from Greg KH: "Here's the big driver misc / char pull request for 3.17-rc1. Lots of things in here, the thunderbolt support for Apple laptops, some other new drivers, testing fixes, and other good things. All have been in linux-next for a long time" * tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (119 commits) misc: bh1780: Introduce the use of devm_kzalloc Lattice ECP3 FPGA: Correct endianness drivers/misc/ti-st: Load firmware from ti-connectivity directory. dt-bindings: extcon: Add support for SM5502 MUIC device extcon: sm5502: Change internal hardware switch according to cable type extcon: sm5502: Detect cable state after completing platform booting extcon: sm5502: Add support new SM5502 extcon device driver extcon: arizona: Get MICVDD against extcon device extcon: Remove unnecessary OOM messages misc: vexpress: Fix sparse non static symbol warnings mei: drop unused hw dependent fw status functions misc: bh1770glc: Use managed functions pcmcia: remove DEFINE_PCI_DEVICE_TABLE usage misc: remove DEFINE_PCI_DEVICE_TABLE usage ipack: Replace DEFINE_PCI_DEVICE_TABLE macro use drivers/char/dsp56k.c: drop check for negativity of unsigned parameter mei: fix return value on disconnect timeout mei: don't schedule suspend in pm idle mei: start disconnect request timer consistently mei: reset client connection state on timeout ...
2014-08-04Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes from Ingo Molar: "The main changes: - torture-test updates - callback-offloading changes - maintainership changes - update RCU documentation - miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) rcu: Allow for NULL tick_nohz_full_mask when nohz_full= missing rcu: Fix a sparse warning in rcu_report_unblock_qs_rnp() rcu: Fix a sparse warning in rcu_initiate_boost() rcu: Fix __rcu_reclaim() to use true/false for bool rcu: Remove CONFIG_PROVE_RCU_DELAY rcu: Use __this_cpu_read() instead of per_cpu_ptr() rcu: Don't use NMIs to dump other CPUs' stacks rcu: Bind grace-period kthreads to non-NO_HZ_FULL CPUs rcu: Simplify priority boosting by putting rt_mutex in rcu_node rcu: Check both root and current rcu_node when setting up future grace period rcu: Allow post-unlock reference for rt_mutex rcu: Loosen __call_rcu()'s rcu_head alignment constraint rcu: Eliminate read-modify-write ACCESS_ONCE() calls rcu: Remove redundant ACCESS_ONCE() from tick_do_timer_cpu rcu: Make rcu node arrays static const char * const signal: Explain local_irq_save() call rcu: Handle obsolete references to TINY_PREEMPT_RCU rcu: Document deadlock-avoidance information for rcu_read_unlock() scripts: Teach get_maintainer.pl about the new "R:" tag rcu: Update rcu torture maintainership filename patterns ...