| Age | Commit message (Collapse) | Author |
|---|
|
David reports that:
<quote>
Perf has this hack where it uses the kernel symbol map as a backup when
a symbol can't be found in the user's symbol table(s).
This causes problems because the tests driving this code path use
machine__kernel_ip(), and that is completely meaningless on Sparc. On
sparc64 the kernel and user live in physically separate virtual address
spaces, rather than a shared one. And the kernel lives at a virtual
address that overlaps common userspace addresses. So this test passes
almost all the time when a user symbol lookup fails.
The consequence of this is that, if the unfound user virtual address in
the sample doesn't match up to a kernel symbol either, we trigger things
like this code in builtin-top.c:
if (al.sym == NULL && al.map != NULL) {
const char *msg = "Kernel samples will not be resolved.\n";
/*
* As we do lazy loading of symtabs we only will know if the
* specified vmlinux file is invalid when we actually have a
* hit in kernel space and then try to load it. So if we get
* here and there are _no_ symbols in the DSO backing the
* kernel map, bail out.
*
* We may never get here, for instance, if we use -K/
* --hide-kernel-symbols, even if the user specifies an
* invalid --vmlinux ;-)
*/
if (!machine->kptr_restrict_warned && !top->vmlinux_warned &&
__map__is_kernel(al.map) && map__has_symbols(al.map)) {
if (symbol_conf.vmlinux_name) {
char serr[256];
dso__strerror_load(al.map->dso, serr, sizeof(serr));
ui__warning("The %s file can't be used: %s\n%s",
symbol_conf.vmlinux_name, serr, msg);
} else {
ui__warning("A vmlinux file was not found.\n%s",
msg);
}
if (use_browser <= 0)
sleep(5);
top->vmlinux_warned = true;
}
}
When I fire up a compilation on sparc, this triggers immediately.
I'm trying to figure out what the "backup to kernel map" code is
accomplishing.
I see some language in the current code and in the changes that have
happened in this area talking about vdso. Does that really happen?
The vdso is mapped into userspace virtual addresses, not kernel ones.
More history. This didn't cause problems on sparc some time ago,
because the kernel IP check used to be "ip < 0" :-) Sparc kernel
addresses are not negative. But now with machine__kernel_ip(), which
works using the symbol table determined kernel address range, it does
trigger.
What it all boils down to is that on architectures like sparc,
machine__kernel_ip() should always return false in this scenerio, and
therefore this kind of logic:
if (cpumode == PERF_RECORD_MISC_USER && machine &&
mg != &machine->kmaps &&
machine__kernel_ip(machine, al->addr)) {
is basically invalid. PERF_RECORD_MISC_USER implies no kernel address
can possibly match for the sample/event in question (no matter how
hard you try!) :-)
</>
So, I thought something had changed and in the past we would somehow
find that address in the kallsyms, but I couldn't find anything to back
that up, the patch introducing this is over a decade old, lots of things
changed, so I was just thinking I was missing something.
I tried a gtod busy loop to generate vdso activity and added a 'perf
probe' at that branch, on x86_64 to see if it ever gets hit:
Made thread__find_map() noinline, as 'perf probe' in lines of inline
functions seems to not be working, only at function start. (Masami?)
# perf probe -x ~/bin/perf -L thread__find_map:57
<thread__find_map@/home/acme/git/perf/tools/perf/util/event.c:57>
57 if (cpumode == PERF_RECORD_MISC_USER && machine &&
58 mg != &machine->kmaps &&
59 machine__kernel_ip(machine, al->addr)) {
60 mg = &machine->kmaps;
61 load_map = true;
62 goto try_again;
}
} else {
/*
* Kernel maps might be changed when loading
* symbols so loading
* must be done prior to using kernel maps.
*/
69 if (load_map)
70 map__load(al->map);
71 al->addr = al->map->map_ip(al->map, al->addr);
# perf probe -x ~/bin/perf thread__find_map:60
Added new event:
probe_perf:thread__find_map (on thread__find_map:60 in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:thread__find_map -aR sleep 1
#
Then used this to see if, system wide, those probe points were being hit:
# perf trace -e *perf:thread*/max-stack=8/
^C[root@jouet ~]#
No hits when running 'perf top' and:
# cat gtod.c
#include <sys/time.h>
int main(void)
{
struct timeval tv;
while (1)
gettimeofday(&tv, 0);
return 0;
}
[root@jouet c]# ./gtod
^C
Pressed 'P' in 'perf top' and the [vdso] samples are there:
62.84% [vdso] [.] __vdso_gettimeofday
8.13% gtod [.] main
7.51% [vdso] [.] 0x0000000000000914
5.78% [vdso] [.] 0x0000000000000917
5.43% gtod [.] _init
2.71% [vdso] [.] 0x000000000000092d
0.35% [kernel] [k] native_io_delay
0.33% libc-2.26.so [.] __memmove_avx_unaligned_erms
0.20% [vdso] [.] 0x000000000000091d
0.17% [i2c_i801] [k] i801_access
0.06% firefox [.] free
0.06% libglib-2.0.so.0.5400.3 [.] g_source_iter_next
0.05% [vdso] [.] 0x0000000000000919
0.05% libpthread-2.26.so [.] __pthread_mutex_lock
0.05% libpixman-1.so.0.34.0 [.] 0x000000000006d3a7
0.04% [kernel] [k] entry_SYSCALL_64_trampoline
0.04% libxul.so [.] style::dom_apis::query_selector_slow
0.04% [kernel] [k] module_get_kallsym
0.04% firefox [.] malloc
0.04% [vdso] [.] 0x0000000000000910
I added a 'perf probe' to thread__find_map:69, and that surely got tons
of hits, i.e. for every map found, just to make sure the 'perf probe'
command was really working.
In the process I noticed a bug, we're only have records for '[vdso]' for
pre-existing commands, i.e. ones that are running when we start 'perf top',
when we will generate the PERF_RECORD_MMAP by looking at /perf/PID/maps.
I.e. like this, for preexisting processes with a vdso map, again,
tracing for all the system, only pre-existing processes get a [vdso] map
(when having one):
[root@jouet ~]# perf probe -x ~/bin/perf __machine__addnew_vdso
Added new event:
probe_perf:__machine__addnew_vdso (on __machine__addnew_vdso in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:__machine__addnew_vdso -aR sleep 1
[root@jouet ~]# perf trace -e probe_perf:__machine__addnew_vdso/max-stack=8/
0.000 probe_perf:__machine__addnew_vdso:(568eb3)
__machine__addnew_vdso (/home/acme/bin/perf)
map__new (/home/acme/bin/perf)
machine__process_mmap2_event (/home/acme/bin/perf)
machine__process_event (/home/acme/bin/perf)
perf_event__process (/home/acme/bin/perf)
perf_tool__process_synth_event (/home/acme/bin/perf)
perf_event__synthesize_mmap_events (/home/acme/bin/perf)
__event__synthesize_thread (/home/acme/bin/perf)
The kernel is generating a PERF_RECORD_MMAP for vDSOs, but somehow
'perf top' is not getting those records while 'perf record' is:
# perf record ~acme/c/gtod
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.076 MB perf.data (1499 samples) ]
# perf report -D | grep PERF_RECORD_MMAP2
71293612401913 0x11b48 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x400000(0x1000) @ 0 fd:02 1137 541179306]: r-xp /home/acme/c/gtod
71293612419012 0x11be0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a2783000(0x227000) @ 0 fd:00 3146370 854107250]: r-xp /usr/lib64/ld-2.26.so
71293612432110 0x11c50 [0x60]: PERF_RECORD_MMAP2 25484/25484: [0x7ffcdb53a000(0x2000) @ 0 00:00 0 0]: r-xp [vdso]
71293612509944 0x11cb0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a23cd000(0x3b6000) @ 0 fd:00 3149723 262067164]: r-xp /usr/lib64/libc-2.26.so
#
# perf script | grep vdso | head
gtod 25484 71293.612768: 2485554 cycles:ppp: 7ffcdb53a914 [unknown] ([vdso])
gtod 25484 71293.613576: 2149343 cycles:ppp: 7ffcdb53a917 [unknown] ([vdso])
gtod 25484 71293.614274: 1814652 cycles:ppp: 7ffcdb53aca8 __vdso_gettimeofday+0x98 ([vdso])
gtod 25484 71293.614862: 1669070 cycles:ppp: 7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso])
gtod 25484 71293.615404: 1451589 cycles:ppp: 7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso])
gtod 25484 71293.615999: 1269941 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
gtod 25484 71293.616405: 1177946 cycles:ppp: 7ffcdb53a914 [unknown] ([vdso])
gtod 25484 71293.616775: 1121290 cycles:ppp: 7ffcdb53ac47 __vdso_gettimeofday+0x37 ([vdso])
gtod 25484 71293.617150: 1037721 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
gtod 25484 71293.617478: 994526 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
#
The patch is the obvious one and with it we also continue to resolve
vdso symbols for pre-existing processes in 'perf top' and for all
processes in 'perf record' + 'perf report/script'.
Suggested-by: David Miller <davem@davemloft.net>
Acked-by: David Miller <davem@davemloft.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-cs7skq9pp0kjypiju6o7trse@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So the extra user build flags are propagated to libtraceevent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: "Herton R. Krzesinski" <herton@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Link: http://lkml.kernel.org/r/20181016150614.21260-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the function name for an inline frame is invalid, we must not try
to demangle this symbol, otherwise we crash with:
#0 0x0000555555895c01 in bfd_demangle ()
#1 0x0000555555823262 in demangle_sym (dso=0x555555d92b90, elf_name=0x0, kmodule=0) at util/symbol-elf.c:215
#2 dso__demangle_sym (dso=dso@entry=0x555555d92b90, kmodule=<optimized out>, kmodule@entry=0, elf_name=elf_name@entry=0x0) at util/symbol-elf.c:400
#3 0x00005555557fef4b in new_inline_sym (funcname=0x0, base_sym=0x555555d92b90, dso=0x555555d92b90) at util/srcline.c:89
#4 inline_list__append_dso_a2l (dso=dso@entry=0x555555c7bb00, node=node@entry=0x555555e31810, sym=sym@entry=0x555555d92b90) at util/srcline.c:264
#5 0x00005555557ff27f in addr2line (dso_name=dso_name@entry=0x555555d92430 "/home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf", addr=addr@entry=2888, file=file@entry=0x0,
line=line@entry=0x0, dso=dso@entry=0x555555c7bb00, unwind_inlines=unwind_inlines@entry=true, node=0x555555e31810, sym=0x555555d92b90) at util/srcline.c:313
#6 0x00005555557ffe7c in addr2inlines (sym=0x555555d92b90, dso=0x555555c7bb00, addr=2888, dso_name=0x555555d92430 "/home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf")
at util/srcline.c:358
So instead handle the case where we get invalid function names for
inlined frames and use a fallback '??' function name instead.
While this crash was originally reported by Hadrien for rust code, I can
now also reproduce it with trivial C++ code. Indeed, it seems like
libbfd fails to interpret the debug information for the inline frame
symbol name:
$ addr2line -e /home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf -if b48
main
/usr/include/c++/8.2.1/complex:610
??
/usr/include/c++/8.2.1/complex:618
??
/usr/include/c++/8.2.1/complex:675
??
/usr/include/c++/8.2.1/complex:685
main
/home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39
I've reported this bug upstream and also attached a patch there which
should fix this issue:
https://sourceware.org/bugzilla/show_bug.cgi?id=23715
Reported-by: Hadrien Grasland <grasland@lal.in2p3.fr>
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a64489c56c30 ("perf report: Find the inline stack for a given address")
[ The above 'Fixes:' cset is where originally the problem was
introduced, i.e. using a2l->funcname without checking if it is NULL,
but this current patch fixes the current codebase, i.e. multiple csets
were applied after a64489c56c30 before the problem was reported by Hadrien ]
Link: http://lkml.kernel.org/r/20180926135207.30263-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The size of the resulting cpu map can be smaller than a multiple of
sizeof(u64), resulting in SIGBUS on cpus like Sparc as the next event
will not be aligned properly.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: 6c872901af07 ("perf cpu_map: Add cpu_map event synthesize function")
Link: http://lkml.kernel.org/r/20181011.224655.716771175766946817.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When a build is run from something like a cron job, the user's $PATH is
rather minimal, of note, not including /usr/sbin in my own case. Because
of that, an automated rpm package build ultimately fails to find
libperf-jvmti.so, because somewhere within the build, this happens...
/bin/sh: alternatives: command not found
/bin/sh: alternatives: command not found
Makefile.config:849: No openjdk development package found, please install
JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel
...and while the build continues, libperf-jvmti.so isn't built, and
things fall down when rpm tries to find all the %files specified. Exact
same system builds everything just fine when the job is launched from a
login shell instead of a cron job, since alternatives is in $PATH, so
openjdk is actually found.
The test required to get into this section of code actually specifies
the full path, as does a block just above it, so let's do that here too.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Fixes: d4dfdf00d43e ("perf jvmti: Plug compilation into perf build")
Link: http://lkml.kernel.org/r/20180906221812.11167-1-jarod@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_event__synthesize_event_update_cpus
John reported crash when recording on an event under PMU with cpumask defined:
root@localhost:~# ./perf_debug_ record -e armv8_pmuv3_0/br_mis_pred/ sleep 1
perf: Segmentation fault
Obtained 9 stack frames.
./perf_debug_() [0x4c5ef8]
[0xffff82ba267c]
./perf_debug_() [0x4bc5a8]
./perf_debug_() [0x419550]
./perf_debug_() [0x41a928]
./perf_debug_() [0x472f58]
./perf_debug_() [0x473210]
./perf_debug_() [0x4070f4]
/lib/aarch64-linux-gnu/libc.so.6(__libc_start_main+0xe0) [0xffff8294c8a0]
Segmentation fault (core dumped)
We synthesize an update event that needs to touch the evsel id array, which is
not defined at that time. Fixing this by forcing the id allocation for events
with their own cpus.
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Fixes: bfd8f72c2778 ("perf record: Synthesize unit/scale/... in event update")
Link: http://lkml.kernel.org/r/20181003212052.GA32371@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Michael reported that he could not stat following event:
$ perf stat -e unc_p_freq_ge_1200mhz_cycles -a -- ls
event syntax error: '..e_1200mhz_cycles'
\___ value too big for format, maximum is 255
Run 'perf list' for a list of valid events
The event is unwrapped into:
uncore_pcu/event=0xb,filter_band0=1200/
where filter_band0 format says it's one byte only:
# cat uncore_pcu/format/filter_band0
config1:0-7
while JSON files specifies bigger number:
"Filter": "filter_band0=1200",
all the filter_band* formats show 1 byte width:
# cat uncore_pcu/format/filter_band1
config1:8-15
# cat uncore_pcu/format/filter_band2
config1:16-23
# cat uncore_pcu/format/filter_band3
config1:24-31
The reason of the issue is that filter_band* values are supposed to be
in 100Mhz units.. it's stated in the JSON help for the events, like:
filter_band3=XXX, with XXX in 100Mhz units
This patch divides the filter_band* values by 100, plus there's couple
of changes that actually change the number completely, like:
- "Filter": "edge=1,filter_band2=4000",
+ "Filter": "edge=1,filter_band2=30",
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181010080339.GB15790@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This reverts commit ac0e2cd555373ae6f8f3a3ad3fbbf5b6d1e7aaaa.
Michael reported an issue with oversized terms values assignment
and I noticed there was actually a misunderstanding of the max
value check in the past.
The above commit's changelog says:
If bit 21 is set, there is parsing issues as below.
$ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/
event syntax error: '..pi_0/event=0x200002,umask=0x8/'
\___ value too big for format, maximum is 511
But there's no issue there, because the event value is distributed
along the value defined by the format. Even if the format defines
separated bit, the value is treated as a continual number, which
should follow the format definition.
In above case it's 9-bit value with last bit separated:
$ cat uncore_qpi_0/format/event
config:0-7,21
Hence the value 0x200002 is correctly reported as format violation,
because it exceeds 9 bits. It should have been 0x102 instead, which
sets the 9th bit - the bit 21 of the format.
$ perf stat -vv -a -e uncore_qpi_0/event=0x102,umask=0x8/
Using CPUID GenuineIntel-6-2D
...
------------------------------------------------------------
perf_event_attr:
type 10
size 112
config 0x200802
sample_type IDENTIFIER
...
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: ac0e2cd55537 ("perf tools: Fix PMU term format max value calculation")
Link: http://lkml.kernel.org/r/20181003072046.29276-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Only use the mapped IP to find inline frames, but keep using the
unmapped IP for the callchain cursor. This ensures we properly show the
unmapped IP when displaying a frame we received via the
dso__parse_addr_inlines API for a module which does not contain
sufficient debug symbols to show the srcline.
This is another follow-up to commit 19610184693c ("perf script: Show
virtual addresses instead of offsets").
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Fixes: 19610184693c ("perf script: Show virtual addresses instead of offsets")
Link: http://lkml.kernel.org/r/20180926135207.30263-2-milian.wolff@kdab.com
Link: http://lkml.kernel.org/r/20181002073949.3297-1-milian.wolff@kdab.com
[ Squashed a fix from Milian for a problem reported by Ravi, fixed up space damage ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When building in ClearLinux using 'make PYTHON=python3' with gcc 8.2.1
it fails with:
GEN /tmp/build/perf/python/perf.so
In file included from /usr/include/python3.7m/Python.h:126,
from /git/linux/tools/perf/util/python.c:2:
/usr/include/python3.7m/import.h:58:24: error: redundant redeclaration of ‘_PyImport_AddModuleObject’ [-Werror=redundant-decls]
PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *, PyObject *);
^~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/python3.7m/import.h:47:24: note: previous declaration of ‘_PyImport_AddModuleObject’ was here
PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *name,
^~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
error: command 'gcc' failed with exit status 1
And indeed there is a redundant declaration in that Python.h file, one
with parameter names and the other without, so just add
-Wno-error=redundant-decls to the python setup instructions.
Now perf builds with gcc in ClearLinux with the following Dockerfile:
# docker.io/acmel/linux-perf-tools-build-clearlinux:latest
FROM docker.io/clearlinux:latest
MAINTAINER Arnaldo Carvalho de Melo <acme@kernel.org>
RUN swupd update && \
swupd bundle-add sysadmin-basic-dev
RUN mkdir -m 777 -p /git /tmp/build/perf /tmp/build/objtool /tmp/build/linux && \
groupadd -r perfbuilder && \
useradd -m -r -g perfbuilder perfbuilder && \
chown -R perfbuilder.perfbuilder /tmp/build/ /git/
USER perfbuilder
COPY rx_and_build.sh /
ENV EXTRA_MAKE_ARGS=PYTHON=python3
ENTRYPOINT ["/rx_and_build.sh"]
Now to figure out why the build fails with clang, that is present in the
above container as detected by the rx_and_build.sh script:
clang version 6.0.1 (tags/RELEASE_601/final)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/sbin
make: Entering directory '/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
Makefile.config:331: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
make[1]: *** [Makefile.perf:206: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/git/linux/tools/perf'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-c3khb9ac86s00qxzjrueomme@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixes a crash when the report encounters an address that could not be
associated with an mmaped region:
#0 0x00005555557bdc4a in callchain_srcline (ip=<error reading variable: Cannot access memory at address 0x38>, sym=0x0, map=0x0) at util/machine.c:2329
#1 unwind_entry (entry=entry@entry=0x7fffffff9180, arg=arg@entry=0x7ffff5642498) at util/machine.c:2329
#2 0x00005555558370af in entry (arg=0x7ffff5642498, cb=0x5555557bdb50 <unwind_entry>, thread=<optimized out>, ip=18446744073709551615) at util/unwind-libunwind-local.c:586
#3 get_entries (ui=ui@entry=0x7fffffff9620, cb=0x5555557bdb50 <unwind_entry>, arg=0x7ffff5642498, max_stack=<optimized out>) at util/unwind-libunwind-local.c:703
#4 0x0000555555837192 in _unwind__get_entries (cb=<optimized out>, arg=<optimized out>, thread=<optimized out>, data=<optimized out>, max_stack=<optimized out>) at util/unwind-libunwind-local.c:725
#5 0x00005555557c310f in thread__resolve_callchain_unwind (max_stack=127, sample=0x7fffffff9830, evsel=0x555555c7b3b0, cursor=0x7ffff5642498, thread=0x555555c7f6f0) at util/machine.c:2351
#6 thread__resolve_callchain (thread=0x555555c7f6f0, cursor=0x7ffff5642498, evsel=0x555555c7b3b0, sample=0x7fffffff9830, parent=0x7fffffff97b8, root_al=0x7fffffff9750, max_stack=127) at util/machine.c:2378
#7 0x00005555557ba4ee in sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fffffff97b8, evsel=<optimized out>, al=al@entry=0x7fffffff9750,
max_stack=<optimized out>) at util/callchain.c:1085
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 2a9d5050dc84 ("perf script: Show correct offsets for DWARF-based unwinding")
Link: http://lkml.kernel.org/r/20180926135207.30263-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With the "branches" export option, not all sample columns are exported.
However the unwanted columns are not at the end of the tuple, as assumed
by the code. Fix by taking the first 15 and last 3 values, instead of
the first 18.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180911114504.28516-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Occasional export failures were found to be caused by truncating 64-bit
pointers to 32-bits. Fix by explicitly setting types for all ctype
arguments and results.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180911114504.28516-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dependency for the man page rule using asciidoctor incorrectly
specifies a source file in $(OUTPUT). When building out-of-tree, the
source file is not found, resulting in a fall-back to the following rule
which uses xmlto.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180916151704.GF4765@decadent.org.uk
Fixes: ffef80ecf89f ("perf Documentation: Support for asciidoctor")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 1c5aae7710bb ("perf machine: Create maps for x86 PTI entry
trampolines") revealed a problem with maps__find_symbol_by_name() that
resulted in probes not being found e.g.
$ sudo perf probe xsk_mmap
xsk_mmap is out of .text, skip it.
Probe point 'xsk_mmap' not found.
Error: Failed to add events.
maps__find_symbol_by_name() can optionally return the map of the found
symbol. It can get the map wrong because, in fact, the symbol is found
on the map's dso, not allowing for the possibility that the dso has more
than one map. Fix by always checking the map contains the symbol.
Reported-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 1c5aae7710bb ("perf machine: Create maps for x86 PTI entry trampolines")
Link: http://lkml.kernel.org/r/20180907085116.25782-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Starting with binutils 2.28, aarch64 objdump adds comments to the
disassembly output to show the alternative names of a condition code
[1].
It is assumed that commas in objdump comments could occur in other
arches now or in the future, so this fix is arch-independent.
The fix could have been done with arm64 specific jump__parse and
jump__scnprintf functions, but the jump__scnprintf instruction would
have to have its comment character be a literal, since the scnprintf
functions cannot receive a struct arch easily.
This inconvenience also applies to the generic jump__scnprintf, which is
why we add a raw_comment pointer to struct ins_operands, so the __parse
function assigns it to be re-used by its corresponding __scnprintf
function.
Example differences in 'perf annotate --stdio2' output on an aarch64
perf.data file:
BEFORE: → b.cs ffff200008133d1c <unwind_frame+0x18c> // b.hs, dffff7ecc47b
AFTER : ↓ b.cs 18c
BEFORE: → b.cc ffff200008d8d9cc <get_alloc_profile+0x31c> // b.lo, b.ul, dffff727295b
AFTER : ↓ b.cc 31c
The branch target labels 18c and 31c also now appear in the output:
BEFORE: add x26, x29, #0x80
AFTER : 18c: add x26, x29, #0x80
BEFORE: add x21, x21, #0x8
AFTER : 31c: add x21, x21, #0x8
The Fixes: tag below is added so stable branches will get the update; it
doesn't necessarily mean that commit was broken at the time, rather it
didn't withstand the aarch64 objdump update.
Tested no difference in output for sample x86_64, power arch perf.data files.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=bb7eff5206e4795ac79c177a80fe9f4630aaf730
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: b13bbeee5ee6 ("perf annotate: Fix branch instruction with multiple operands")
Link: http://lkml.kernel.org/r/20180827125340.a2f7e291901d17cea05daba4@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This makes sure that the SyS symbols are ignored for any powerpc system,
not just the big endian ones.
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: fb6d59423115 ("perf probe ppc: Use the right prefix when ignoring SyS symbols on ppc")
Link: http://lkml.kernel.org/r/20180828090848.1914-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some implementations of libc do not support the 'm' width modifier as
part of the scanf string format specifier. This can cause the parsing to
fail. Since the parser never checks if the scanf parsing was
successesful, this can result in a crash.
Change the comm string to be allocated as a fixed size instead of
dynamically using 'm' scanf width modifier. This can be safely done
since comm size is limited to 16 bytes by TASK_COMM_LEN within the
kernel.
This change prevents perf from crashing when linked against bionic as
well as reduces the total number of heap allocations and frees invoked
while accomplishing the same task.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180830021950.15563-1-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the write to the output_fd in the error condition of
record_saved_cmdline(), we are writing 8 bytes from a memory location on
the stack that contains a primitive that is only 4 bytes in size.
Change the primitive to 8 bytes in size to match the size of the write
in order to avoid reading unknown memory from the stack.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180829061954.18871-1-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We were emitting 4 lines, two of them misleading:
make: Entering directory '/home/acme/git/perf/tools/perf'
<SNIP>
INSTALL lib
INSTALL include/bpf
INSTALL lib
INSTALL examples/bpf
<SNIP>
make: Leaving directory '/home/acme/git/perf/tools/perf'
Make it more compact by showing just two lines:
make: Entering directory '/home/acme/git/perf/tools/perf'
INSTALL bpf-headers
INSTALL bpf-examples
make: Leaving directory '/home/acme/git/perf/tools/perf'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0nvkyciqdkrgy829lony5925@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If evsel is NULL, we should return NULL to avoid a NULL pointer
dereference a bit later in the code.
Signed-off-by: Hisao Tanabe <xtanabe@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 03e0a7df3efd ("perf tools: Introduce bpf-output event")
LPU-Reference: 20180824154556.23428-1-xtanabe@gmail.com
Link: https://lkml.kernel.org/n/tip-e5plzjhx6595a5yjaf22jss3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The new syscall table support for arm64 mistakenly used the system's
asm-generic/unistd.h file when processing the
tools/arch/arm64/include/uapi/asm/unistd.h file's include directive:
#include <asm-generic/unistd.h>
See "Committer notes" section of commit 2b5882435606 "perf arm64:
Generate system call table from asm/unistd.h" for more details.
This patch removes the committer's temporary workaround, and instructs
the host compiler to search the build tree's include path for the right
copy of the unistd.h file, instead of the one on the system's
/usr/include path.
It thus fixes the committer's test that cross-builds an arm64 perf on an
x86 platform running Ubuntu 14.04.5 LTS with an old toolchain:
$ tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc `pwd`/tools tools/arch/arm64/include/uapi/asm/unistd.h | grep bpf
[280] = "bpf",
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 2b5882435606 ("perf arm64: Generate system call table from asm/unistd.h")
Link: http://lkml.kernel.org/r/20180806172800.bbcec3cfcc51e2facc978bf2@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding to tests that aims on kernel breakpoint modification bugs.
First test creates HW breakpoint, tries to change it and checks it was
properly changed. It aims on kernel issue that prevents HW breakpoint to
be changed via ptrace interface.
The first test forks, the child sets itself as ptrace tracee and waits
in signal for parent to trace it, then it calls bp_1 and quits.
The parent does following steps:
- creates a new breakpoint (id 0) for bp_2 function
- changes that breakpoint to bp_1 function
- waits for the breakpoint to hit and checks
it has proper rip of bp_1 function
This test aims on an issue in kernel preventing to change disabled
breakpoints
Second test mimics the first one except for few steps
in the parent:
- creates a new breakpoint (id 0) for bp_1 function
- changes that breakpoint to bogus (-1) address
- waits for the breakpoint to hit and checks
it has proper rip of bp_1 function
This test aims on an issue in kernel disabling enabled
breakpoint after unsuccesful change.
Committer testing:
# uname -a
Linux jouet 4.18.0-rc8-00002-g1236568ee3cb #12 SMP Tue Aug 7 14:08:26 -03 2018 x86_64 x86_64 x86_64 GNU/Linux
# perf test -v "bp modify"
62: x86 bp modify :
--- start ---
test child forked, pid 25671
in bp_1
tracee exited prematurely 2
FAILED arch/x86/tests/bp-modify.c:209 modify test 1 failed
test child finished with -1
---- end ----
x86 bp modify: FAILED!
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milind Chabbi <chabbi.milind@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180827091228.2878-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The patch changes the parsing of:
callq *0x8(%rbx)
from:
0.26 │ → callq *8
to:
0.26 │ → callq *0x8(%rbx)
in this case an address is followed by a register, thus one can't parse
only the address.
Committer testing:
1) run 'perf record sleep 10'
2) before applying the patch, run:
perf annotate --stdio2 > /tmp/before
3) after applying the patch, run:
perf annotate --stdio2 > /tmp/after
4) diff /tmp/before /tmp/after:
--- /tmp/before 2018-08-28 11:16:03.238384143 -0300
+++ /tmp/after 2018-08-28 11:15:39.335341042 -0300
@@ -13274,7 +13274,7 @@
↓ jle 128
hash_value = hash_table->hash_func (key);
mov 0x8(%rsp),%rdi
- 0.91 → callq *30
+ 0.91 → callq *0x30(%r12)
mov $0x2,%r8d
cmp $0x2,%eax
node_hash = hash_table->hashes[node_index];
@@ -13848,7 +13848,7 @@
mov %r14,%rdi
sub %rbx,%r13
mov %r13,%rdx
- → callq *38
+ → callq *0x38(%r15)
cmp %rax,%r13
1.91 ↓ je 240
1b4: mov $0xffffffff,%r13d
@@ -14026,7 +14026,7 @@
mov %rcx,-0x500(%rbp)
mov %r15,%rsi
mov %r14,%rdi
- → callq *38
+ → callq *0x38(%rax)
mov -0x500(%rbp),%rcx
cmp %rax,%rcx
↓ jne 9b0
<SNIP tons of other such cases>
Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kim Phillips <kim.phillips@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/bd1f3932-be2b-85f9-7582-111ee0a43b07@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Jaroslav reported errors from valgrind over perf python script:
# echo 0 > /sys/devices/system/cpu/cpu4/online
# valgrind ./test.py
==7524== Memcheck, a memory error detector
...
==7524== Command: ./test.py
==7524==
pid 7526 exited
==7524== Invalid read of size 8
==7524== at 0xCC2C2B3: perf_mmap__read_forward (evlist.c:780)
==7524== by 0xCC2A681: pyrf_evlist__read_on_cpu (python.c:959)
...
==7524== Address 0x65c4868 is 16 bytes after a block of size 459,36..
==7524== at 0x4C2B955: calloc (vg_replace_malloc.c:711)
==7524== by 0xCC2F484: zalloc (util.h:35)
==7524== by 0xCC2F484: perf_evlist__alloc_mmap (evlist.c:978)
...
The reason for this is in the python interface, that allows a script to
pass arbitrary cpu number, which is then used to access struct
perf_evlist::mmap array. That's obviously wrong and works only when if
all cpus are available and fails if some cpu is missing, like in the
example above.
This patch makes pyrf_evlist__read_on_cpu() search the evlist's maps
array for the proper map to access.
It's linear search at the moment. Based on the way how is the
read_on_cpu used, I don't think we need to be fast in here. But we
could add some hash in the middle to make it fast/er.
We don't allow python interface to set write_backward event attribute,
so it's safe to check only evlist's mmaps.
Reported-by: Jaroslav Škarvada <jskarvad@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817114556.28000-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Store the real cpu number in 'struct perf_mmap', which will be used by
python interface that allows user to read a particular memory map for
given cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817114556.28000-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Having comp carrying the compression ID, we no longer need return the
extension. Removing it and updating the automated test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add implementation of the is_compressed callback for gzip.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add implementation of the is_compressed callback for lzma.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add is_compressed callback to the compressions array, that returns 0 if
the file is compressed or != 0 if not.
The new callback is used to recognize the situation when we have a
'compressed' object, like:
/lib/modules/.../drivers/net/ethernet/intel/igb/igb.ko.xz
but we need to read its debug data from debuginfo files, which might not
be compressed, like:
/root/.debug/.build-id/d6/...c4b301f/debug
So even for a 'compressed' object we read debug data from a plain
uncompressed object. To keep this transparent, we detect this in
decompress_kmodule() and return the file descriptor to the uncompressed
file.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We will add a compression check in the following patch and it makes it
easier if the file processing is done in a single place. It also makes
the current code simpler.
The decompress_kmodule function now returns the fd of the uncompressed
file and the file name in the pathname arg, if it's provided.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Once we parsed out the compression ID, we dont need to iterate all
available compressions and we can call it directly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add comp to 'struct dso' to hold the compression index. It will be used
in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Store a decompression ID in 'struct kmod_path', so it can be later
stored in 'struct dso'.
Switch 'struct kmod_path's 'comp' from 'bool' to 'int' to return the
compressions array index. Add 0 index item into compressions array, so
that the comp usage stays as it was: 0 - no compression, != 0
compression index.
Update the kmod_path tests.
Committer notes:
Use a designated initializer + terminating comma, e.g. { .fmt = NULL, }, to fix
the build in several distros:
centos:6: util/dso.c:201: error: mis |
