summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2014-06-01ASoC: intel: The Baytrail/MAX98090 driver depends on I2CMark Brown
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared supportOder Chiou
The patch adds the function "get_clk_info" to RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared ↵Oder Chiou
support The patch adds the function of the PLL clock calculation to RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and ↵Oder Chiou
RT5651 The patch adds the RL6231 class device shared support for RT5640, RT5645 and RT5651. The function of the DMIC clock calculation can be shared by RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01Merge branches 'topic/rt5640', 'topic/rt5645' and 'topic/rt5651' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rl6231
2014-06-01ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error.Xiubo Li
Since we cannot make sure the 'reg_size' will always be none zero here, and then if 'reg_size' equals to zero, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the 'reg_size' zero check before calling kzalloc(). Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ALSA: bebob: sizeof() vs ARRAY_SIZE() typoDan Carpenter
ARRAY_SIZE() was intended here instead of sizeof(). The "bridgeco_freq_table" array holds integers so the original condition is never true. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-01Merge branch 'topic/fsl' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-fsl-ssi Conflicts: sound/soc/fsl/Kconfig
2014-06-01ASoC: wm9713: correct mono out PGA sourcesMatt Reimer
The mono output PGA input only has four possible sources, so omit the rest. Signed-off-by: Matt Reimer <mreimer@sdgsystems.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ALSA: synth: emux: soundfont.c: Cleaning up memory leakRickard Strandqvist
There is a risk for memory leak in when something unexpected happens and the function returns. This was largely found by using a static code analysis program called cppcheck. [fixed a typo of kfree() by tiwai] Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-01ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320Alexander Shiyan
Eukrea-i.MX51 board was converted to use DT, ie we no longer have a MACH_EUKREA_MBIMXSD51_BASEBOARD symbol. Transformation of other boards planned for the near future, so this patch removes all these dependencies and restricts build of this driver to ARCH_MXC. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: fsl-ssi: Use regmapMarkus Pargmann
This patch replaces the ssi specific functions write_ssi, read_ssi and write_ssi_mask by standard regmap function calls. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: fsl-ssi: reorder and document fsl_ssi_privateMarkus Pargmann
Reorder all variables in struct fsl_ssi_private to have groups that make sense together. The patch also updates the struct documentation. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: fsl-ssi: Fix baudclock handlingMarkus Pargmann
The baudclock may be used and set by different streams. Allow only the first stream to set the bitclock rate. Other streams have to try to get to the correct rate without modifying the bitclock rate using the SSI internal clock modifiers. The variable baudclk_streams is introduced to keep track of the active streams that are using the baudclock. This way we know if the baudclock may be set and whether we may enable/disable the clock. baudclock enable/disable is moved to hw_params()/hw_free(). This way we can keep track of the baudclock in those two functions and avoid a running clock while it is not used. As hw_params()/hw_free() may be called multiple times for the same stream, we have to use baudclk_streams variable to know whether we may enable/disable the clock. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: fsl-ssi: Set framerate divider correctly for i2s master modeSascha Hauer
In i2s master mode the fsl_ssi driver depends on someone calling .set_tdm_slot correctly. In this mode though only a DC value of 2 is allowed, so set it in this case and no longer depend on .set_tdm_slot. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: fsl-ssi: remove unnecessary spinlockSascha Hauer
The baudclock_locked variable is only used in functions which are serialized anyway from the core. No need to have a lock around the variable, so remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: fsl-ssi: set bitclock in master mode from hw_paramsSascha Hauer
The fsl_ssi driver uses the .set_sysclk callback to configure the bitclock for master mode. This is unnecessary since the bitclock is known in hw_params. This patch configures the bitclock from .hw_params. .set_dai_sysclk now sets a bitclock frequency which is preferred over the default calculated bitclock frequency. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: fsl-ssi: make fsl,mode property optionalMarkus Pargmann
The simple soundcard binding has its own way for specifying the dai format. To be able to use this binding we have to make the fsl,mode property optional. As the property is used in existing devicetrees keep the option around for compatibility reasons. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: fsl-ssi: introduce SoC specific dataSascha Hauer
Introduce a SoC data struct which contains the differences between the different SoCs this driver supports. This makes it easy to support more differences without having to introduce a new switch/case each time. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: Intel: byt-rt5640: Use card PM ops from coreJarkko Nikula
Use card PM ops from ASoC core instead of defining custom PM ops here since we are calling anyway common suspend/resume callbacks. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: Intel: Use devm_snd_soc_register_cardJarkko Nikula
Simplify byt-rt5640.c and haswell.c machine drivers by using devm_snd_soc_register_card(). Remove also needless dev_set_drvdata() from byt_rt5640_probe() since snd_soc_register_card() does it too. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: Intel: remove duplicate headersAndy Shevchenko
A few files contain duplicate headers. This patch removes the second entry of duplicate in each file under question. There is no functional changes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: Intel: Clear stored Baytrail DSP DMA pointer before stream startJarkko Nikula
Stored DSP DMA pointer must be cleared before starting the stream since PCM pointer callback sst_byt_pcm_pointer() can be called before pointer is updated. In that case last position of previous stream was wronly returned. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: cs42l56: Fix new value argument in snd_soc_update_bits callsAxel Lin
The new value argument needs proper shift to match the mask bit fields. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Brian Austin <brian.austin@cirrus.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: Intel: byt/hsw: Add missing kthread_stop to error/cleanup pathImre Deak
Baytrail and Haswell SST IPC don't stop the kernel thread in error and cleanup path thus leaving orphan kernel thread behind in such a case. Also while at it, fix one error path in sst-haswell-ipc.c that doesn't free hsw->msg. [Jarkko: I edited the commit log a little] Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: Intel: Add Baytrail byt-max98090 machine driverJarkko Nikula
Add machine driver and ACPI probing for Baytrail SST with MAX98090 codec. Jack detect code from Kevin Strasser <kevin.strasser@intel.com>, GPIO resolving from Mika Westerberg <mika.westerberg@linux.intel.com> and fixes and cleanups from Liam Girdwood <liam.r.girdwood@linux.intel.com>. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: tlv320aci3x: Fix custom snd_soc_dapm_put_volsw_aic3x() functionPeter Ujfalusi
For some unknown reason the parameters for snd_soc_test_bits() were in wrong order: It was: snd_soc_test_bits(codec, val, mask, reg); /* WRONG!!! */ while it should be: snd_soc_test_bits(codec, reg, mask, val); Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-05-30ALSA: firewire: Fix dependency on PCM and rawmidiTakashi Iwai
Now snd-firewire-lib supports rawmidi in addition to PCM, thus we need to give a proper dependency. For fixing and simplification, move the selections of SND_PCM and SND_RAWMIDI into SND_FIREWIRE_LIB section. Then each driver doesn't have to select them but only SND_FIREWIRE_LIB. Reported-by: Jim Davis <jim.epost@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-30ALSA: hda/analog - Fix silent output on ASUS A8JNTakashi Iwai
ASUS A8JN with AD1986A codec seems following the normal EAPD in the normal order (0 = off, 1 = on) unlike other machines with AD1986A. Apply the workaround used for Toshiba laptop that showed the same problem. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=75041 Cc: <stable@vger.kernel.org> [3.11+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-30ALSA: gus: remove checks for CONFIG_SND_DEBUG_ROMPaul Bolle
Checks for CONFIG_SND_DEBUG_ROM were added in v2.5.5 but a Kconfig symbol SND_DEBUG_ROM was never added. These checks have always evaluated to false. Remove them and the printk()s they hide. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-30sound: remove checks for CONFIG_BCM_CS4297A_CSWARMPaul Bolle
Checks for CONFIG_BCM_CS4297A_CSWARM were added in v2.6.11. The related Kconfig symbol was never added so these checks always evaluated to true. Remove them. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-29ASoC: wm8804: Allow control of master clock divider in PLL generationDaniel Matuschek
WM8804 can run with PLL frequencies of 256xfs and 128xfs for most sample rates. At 192kHz only 128xfs is supported. The existing driver selects 128xfs automatically for some lower samples rates. By using an additional mclk_div divider, it is now possible to control the behaviour. This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow lower jitter and better signal quality. The behavior has to be controlled by the sound card driver, because some sample frequency share the same setting. e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the MCLK divider. Signed-off-by: Daniel Matuschek <daniel@matuschek.net> Tested-by: Florian Meier <florian.meier@koalo.de> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-29ALSA: hda - move some alc662 family machines to hda_pin_quirk tableHui Wang
Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-29ALSA: hda - move some alc269 family machines to hda_pin_quirk tableHui Wang
Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-29Revert "ALSA: hda - drop def association and sequence from pinconf comparing"Hui Wang
This reverts commit c687200b9d4ef60042a50f7d942cfef120cc7bf1. Dropping the def association and sequence from pinconf comparing is a bit risky, It will introduce a greater risk of catching unwanted machines. And in addition, so far no BIOS experts give us an explicit answer whether it makes senses to compare these two fields or not. For safety reason, we revert this commit. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-29ALSA: fireworks: small leak on error pathDan Carpenter
There was a typo here so we return directly instead of freeing "hwinfo". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-29ALSA: fireworks: remove some stray checksDan Carpenter
We checked "err" earlier. These things seem to be left over code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-28ALSA: au1x00: Use resource_size instead of computationBenoit Taine
This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/resource_size.cocci Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27ASoC: Blackfin: ADAU1X81 eval board supportLars-Peter Clausen
This patch adds a ASoC machine driver to support the EVAL-ADAU1X81 board connected to a Analog Devices BF5XX evaluation board. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27ASoC: Blackfin: ADAU1X61 eval board supportLars-Peter Clausen
This patch adds a ASoC machine driver to support the EVAL-ADAU1X61 board connected to a Analog Devices BF5XX evaluation board. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27ASoC: Add ADAU1381/ADAU1781 audio CODEC supportLars-Peter Clausen
This patch adds support for the Analog Devices ADAU1381 and ADAU1781 audio CODECs. The device is a low-power, 24-bit stereo audio CODEC with multiple analog inputs and outputs, two digital microphone inputs and an I2S interface. The device can be controlled either using I2C or SPI. The main difference between the two variants is that the ADAU1781 has a freely programmable SigmaDSP processor, while the ADAU1381 has a fixed function wind noise reduction filter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27ASoC: Add ADAU1361/ADAU1761 audio CODEC supportLars-Peter Clausen
This patch adds support for the Analog Devices ADAU1361 and ADAU1761 CODECs. The device is a a low-power, 24-bit stereo audio CODEC with multiple analog input and outputs, one digital microphone input and an I2S interface. The device can be controlled either via I2C or SPI. The main difference between the two variants is that the ADAU1761 has a built-in SigmaDSP, while the ADAU1361 has not. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27ASoC: Add ADAU1X61 and ADAU1X81 CODECs common codeLars-Peter Clausen
The ADAU1X61 and ADAU1X81 are very similar in the digital domain, but are quite different in the analog domain. This patch adds support for the common parts of the ADAU1X61 and ADAU1X81 CODECs. The patch also restores some of the alphabetical order in the Makfile and Kconfig. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27Merge branch 'topic/firewire' into for-nextTakashi Iwai
This is a merge of big firewire audio stack updates by Takashi Sakamoto.
2014-05-27ALSA: bebob: Improve comments about stream formatTakashi Sakamoto
Currently bebob driver apply Raw Audio Data channel (in IEC 61883-1:2002, Multi Bit Linear Audio Data channel in IEC 61883-6:20005) to IEC 60958 Conformant Data channel because both fireworks and bebob based devices can handle it by ignoring each label. This patch improves a comment about this. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27ALSA: bebob: Remove meaningless mutex_unlock()Takashi Sakamoto
Currently mutex_unlock() is called in module's cleanup function. But after cleaned up, this mutex is automatically released. So this function call is meaningless. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27ALSA: bebob: Add static specifier to identifier with file scopeTakashi Sakamoto
Some variables were declared without static even if they're not referred to from external files. This commit make them local symbols for better information-hiding by file unit. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27ALSA: bebob: Use different names for identifiers in the same fileTakashi Sakamoto
To suppress 'sparse' warning. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27ALSA: fireworks/bebob: Improve indentationTakashi Sakamoto
According to coding rule. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27ALSA: fireworks/bebob: Add suffix for long long integer literalTakashi Sakamoto
This commit adds suffix to register values of each device, to supress 'sparse' warnings. Additionally, this commit changes offset values with integer literal. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-25 07:38:51 +0000