| Age | Commit message (Collapse) | Author |
|---|
|
The per-cpu bpf_redirect_info is shared among all skb_do_redirect()
and BPF redirect helpers. Callers on RX path are all in BH context,
disabling preemption is not sufficient to prevent BH interruption.
In production, we observed strange packet drops because of the race
condition between LWT xmit and TC ingress, and we verified this issue
is fixed after we disable BH.
Although this bug was technically introduced from the beginning, that
is commit 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure"),
at that time call_rcu() had to be call_rcu_bh() to match the RCU context.
So this patch may not work well before RCU flavor consolidation has been
completed around v5.0.
Update the comments above the code too, as call_rcu() is now BH friendly.
Signed-off-by: Dongdong Wang <wangdongdong.6@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20201205075946.497763-1-xiyou.wangcong@gmail.com
|
|
If force_zc is set, we should exit out with an error, not fall back to
copy mode.
Fixes: 921b68692abb ("xsk: Enable sharing of dma mappings")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1607077277-41995-1-git-send-email-zhangchangzhong@huawei.com
|
|
Modify the tx writeable condition from the queue is not full to the
number of present tx queues is less than the half of the total number
of queues. Because the tx queue not full is a very short time, this will
cause a large number of EPOLLOUT events, and cause a large number of
process wake up.
Fixes: 35fcde7f8deb ("xsk: support for Tx")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/508fef55188d4e1160747ead64c6dcda36735880.1606555939.git.xuanzhuo@linux.alibaba.com
|
|
datagram_poll will judge the current socket status (EPOLLIN, EPOLLOUT)
based on the traditional socket information (eg: sk_wmem_alloc), but
this does not apply to xsk. So this patch uses sock_poll_wait instead of
datagram_poll, and the mask is calculated by xsk_poll.
Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/e82f4697438cd63edbf271ebe1918db8261b7c09.1606555939.git.xuanzhuo@linux.alibaba.com
|
|
It turns out that it does exist a path where xdp_return_buff() is
being passed an XDP buffer of type MEM_TYPE_XSK_BUFF_POOL. This path
is when AF_XDP zero-copy mode is enabled, and a buffer is redirected
to a DEVMAP with an attached XDP program that drops the buffer.
This change simply puts the handling of MEM_TYPE_XSK_BUFF_POOL back
into xdp_return_buff().
Fixes: 82c41671ca4f ("xdp: Simplify xdp_return_{frame, frame_rx_napi, buff}")
Reported-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/bpf/20201127171726.123627-1-bjorn.topel@gmail.com
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported
by syzbot.
2) Remove spurious reports on nf_tables when lockdep gets disabled,
from Florian Westphal.
3) Fix memleak in the error path of error path of
ip_vs_control_net_init(), from Wang Hai.
4) Fix missing control data in flow dissector, otherwise IP address
matching in hardware offload infra does not work.
5) Fix hardware offload match on prefix IP address when userspace
does not send a bitwise expression to represent the prefix.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables_offload: build mask based from the matching bytes
netfilter: nftables_offload: set address type in control dissector
ipvs: fix possible memory leak in ip_vs_control_net_init
netfilter: nf_tables: avoid false-postive lockdep splat
netfilter: ipset: prevent uninit-value in hash_ip6_add
====================
Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.
As a result, "ip route get" can return a different route than what
would be used when sending real packets.
For example:
$ ip route add 192.0.2.11/32 dev eth0
$ ip route add unreachable 192.0.2.11/32 tos 2
$ ip route get 192.0.2.11 tos 2
RTNETLINK answers: No route to host
But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:
$ ping -c 1 -Q 2 192.0.2.11
PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms
--- 192.0.2.11 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms
This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.
Fixes: 3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-11-28
1) Do not reference the skb for xsk's generic TX side since when looped
back into RX it might crash in generic XDP, from Björn Töpel.
2) Fix umem cleanup on a partially set up xsk socket when being destroyed,
from Magnus Karlsson.
3) Fix an incorrect netdev reference count when failing xsk_bind() operation,
from Marek Majtyka.
4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(),
from Zhen Lei.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add MAINTAINERS entry for BPF LSM
bpftool: Fix error return value in build_btf_type_table
net, xsk: Avoid taking multiple skbuff references
xsk: Fix incorrect netdev reference count
xsk: Fix umem cleanup bug at socket destruct
MAINTAINERS: Update XDP and AF_XDP entries
====================
Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-20201127' of git://git.open-mesh.org/linux-merge:
batman-adv: Don't always reallocate the fragmentation skb head
batman-adv: Reserve needed_*room for fragments
batman-adv: Consider fragmentation for needed_headroom
====================
Link: https://lore.kernel.org/r/20201127173849.19208-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the
hooks as, while it's an expected value for a bridge, routing expects
PACKET_HOST. The change is undone later on after hook traversal. This
can be seen with pairs of functions updating skb>pkt_type and then
reverting it to its original value:
For hook NF_INET_PRE_ROUTING:
setup_pre_routing / br_nf_pre_routing_finish
For hook NF_INET_FORWARD:
br_nf_forward_ip / br_nf_forward_finish
But the third case where netfilter does this, for hook
NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing
but never reverted. A comment says:
/* We assume any code from br_dev_queue_push_xmit onwards doesn't care
* about the value of skb->pkt_type. */
But when having a tunnel (say vxlan) attached to a bridge we have the
following call trace:
br_nf_pre_routing
br_nf_pre_routing_ipv6
br_nf_pre_routing_finish
br_nf_forward_ip
br_nf_forward_finish
br_nf_post_routing <- pkt_type is updated to PACKET_HOST
br_nf_dev_queue_xmit <- but not reverted to its original value
vxlan_xmit
vxlan_xmit_one
skb_tunnel_check_pmtu <- a check on pkt_type is performed
In this specific case, this creates issues such as when an ICMPv6 PTB
should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB
isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST
and returns early).
If the comment is right and no one cares about the value of
skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting
it to its original value should be safe.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-27
The first patch is by me and target the gs_usb driver and fixes the endianess
problem with candleLight firmware.
Another patch by me for the mcp251xfd driver add sanity checking to bail out if
no IRQ is configured.
The next three patches target the m_can driver. A patch by me removes the
hardcoded IRQF_TRIGGER_FALLING from the request_threaded_irq() as this clashes
with the trigger level specified in the DT. Further a patch by me fixes the
nominal bitiming tseg2 min value for modern m_can cores. Pankaj Sharma's patch
add support for cores version 3.3.x.
The last patch by Oliver Hartkopp is for af_can and converts a WARN() into a
pr_warn(), which is triggered by the syzkaller. It was able to create a
situation where the closing of a socket runs simultaneously to the notifier
call chain for removing the CAN network device in use.
* tag 'linux-can-fixes-for-5.10-20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
====================
Link: https://lore.kernel.org/r/20201127100301.512603-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When setting sk_err, set it to ee_errno, not ee_origin.
Commit f5f99309fa74 ("sock: do not set sk_err in
sock_dequeue_err_skb") disabled updating sk_err on errq dequeue,
which is correct for most error types (origins):
- sk->sk_err = err;
Commit 38b257938ac6 ("sock: reset sk_err when the error queue is
empty") reenabled the behavior for IMCP origins, which do require it:
+ if (icmp_next)
+ sk->sk_err = SKB_EXT_ERR(skb_next)->ee.ee_origin;
But read from ee_errno.
Fixes: 38b257938ac6 ("sock: reset sk_err when the error queue is empty")
Reported-by: Ayush Ranjan <ayushranjan@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20201126151220.2819322-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If an msk listener receives an MPJ carrying an invalid token, it
will zero the request socket msk entry. That should later
cause fallback and subflow reset - as per RFC - at
subflow_syn_recv_sock() time due to failing hmac validation.
Since commit 4cf8b7e48a09 ("subflow: introduce and use
mptcp_can_accept_new_subflow()"), we unconditionally dereference
- in mptcp_can_accept_new_subflow - the subflow request msk
before performing hmac validation. In the above scenario we
hit a NULL ptr dereference.
Address the issue doing the hmac validation earlier.
Fixes: 4cf8b7e48a09 ("subflow: introduce and use mptcp_can_accept_new_subflow()")
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/03b2cfa3ac80d8fc18272edc6442a9ddf0b1e34e.1606400227.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the openvswitch module is not accepting the correctly formated
netlink message for the TTL decrement action. For both setting and getting
the dec_ttl action, the actions should be nested in the
OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi.
When the original patch was sent, it was tested with a private OVS userspace
implementation. This implementation was unfortunately not upstreamed and
reviewed, hence an erroneous version of this patch was sent out.
Leaving the patch as-is would cause problems as the kernel module could
interpret additional attributes as actions and vice-versa, due to the
actions not being encapsulated/nested within the actual attribute, but
being concatinated after it.
Fixes: 744676e77720 ("openvswitch: add TTL decrement action")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Userspace might match on prefix bytes of header fields if they are on
the byte boundary, this requires that the mask is adjusted accordingly.
Use NFT_OFFLOAD_MATCH_EXACT() for meta since prefix byte matching is not
allowed for this type of selector.
The bitwise expression might be optimized out by userspace, hence the
kernel needs to infer the prefix from the number of payload bytes to
match on. This patch adds nft_payload_offload_mask() to calculate the
bitmask to match on the prefix.
Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds nft_flow_rule_set_addr_type() to set the address type
from the nft_payload expression accordingly.
If the address type is not set in the control dissector then a rule that
matches either on source or destination IP address does not work.
After this patch, nft hardware offload generates the flow dissector
configuration as tc-flower does to match on an IP address.
This patch has been also tested functionally to make sure packets are
filtered out by the NIC.
This is also getting the code aligned with the existing netfilter flow
offload infrastructure which is also setting the control dissector.
Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
kmemleak report a memory leak as follows:
BUG: memory leak
unreferenced object 0xffff8880759ea000 (size 256):
backtrace:
[<00000000c0bf2deb>] kmem_cache_zalloc include/linux/slab.h:656 [inline]
[<00000000c0bf2deb>] __proc_create+0x23d/0x7d0 fs/proc/generic.c:421
[<000000009d718d02>] proc_create_reg+0x8e/0x140 fs/proc/generic.c:535
[<0000000097bbfc4f>] proc_create_net_data+0x8c/0x1b0 fs/proc/proc_net.c:126
[<00000000652480fc>] ip_vs_control_net_init+0x308/0x13a0 net/netfilter/ipvs/ip_vs_ctl.c:4169
[<000000004c927ebe>] __ip_vs_init+0x211/0x400 net/netfilter/ipvs/ip_vs_core.c:2429
[<00000000aa6b72d9>] ops_init+0xa8/0x3c0 net/core/net_namespace.c:151
[<00000000153fd114>] setup_net+0x2de/0x7e0 net/core/net_namespace.c:341
[<00000000be4e4f07>] copy_net_ns+0x27d/0x530 net/core/net_namespace.c:482
[<00000000f1c23ec9>] create_new_namespaces+0x382/0xa30 kernel/nsproxy.c:110
[<00000000098a5757>] copy_namespaces+0x2e6/0x3b0 kernel/nsproxy.c:179
[<0000000026ce39e9>] copy_process+0x220a/0x5f00 kernel/fork.c:2072
[<00000000b71f4efe>] _do_fork+0xc7/0xda0 kernel/fork.c:2428
[<000000002974ee96>] __do_sys_clone3+0x18a/0x280 kernel/fork.c:2703
[<0000000062ac0a4d>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
[<0000000093f1ce2c>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
In the error path of ip_vs_control_net_init(), remove_proc_entry() needs
to be called to remove the added proc entry, otherwise a memory leak
will occur.
Also, add some '#ifdef CONFIG_PROC_FS' because proc_create_net* return NULL
when PROC is not used.
Fixes: b17fc9963f83 ("IPVS: netns, ip_vs_stats and its procfs")
Fixes: 61b1ab4583e2 ("IPVS: netns, add basic init per netns.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
operation sanity check
To detect potential bugs in CAN protocol implementations (double removal of
receiver entries) a WARN() statement has been used if no matching list item was
found for removal.
The fault injection issued by syzkaller was able to create a situation where
the closing of a socket runs simultaneously to the notifier call chain for
removing the CAN network device in use.
This case is very unlikely in real life but it doesn't break anything.
Therefore we just replace the WARN() statement with pr_warn() to preserve the
notification for the CAN protocol development.
Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com
Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com
Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
When a packet is fragmented by batman-adv, the original batman-adv header
is not modified. Only a new fragmentation is inserted between the original
one and the ethernet header. The code must therefore make sure that it has
a writable region of this size in the skbuff head.
But it is not useful to always reallocate the skbuff by this size even when
there would be more than enough headroom still in the skb. The reallocation
is just to costly during in this codepath.
Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The batadv net_device is trying to propagate the needed_headroom and
needed_tailroom from the lower devices. This is needed to avoid cost
intensive reallocations using pskb_expand_head during the transmission.
But the fragmentation code split the skb's without adding extra room at the
end/beginning of the various fragments. This reduced the performance of
transmissions over complex scenarios (batadv on vxlan on wireguard) because
the lower devices had to perform the reallocations at least once.
Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
If a batman-adv packets has to be fragmented, then the original batman-adv
packet header is not stripped away. Instead, only a new header is added in
front of the packet after it was split.
This size must be considered to avoid cost intensive reallocations during
the transmission through the various device layers.
Fixes: 7bca68c7844b ("batman-adv: Add lower layer needed_(head|tail)room to own ones")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
tls_device_offload_cleanup_rx doesn't clear tls_ctx->netdev after
calling tls_dev_del if TLX TX offload is also enabled. Clearing
tls_ctx->netdev gets postponed until tls_device_gc_task. It leaves a
time frame when tls_device_down may get called and call tls_dev_del for
RX one extra time, confusing the driver, which may lead to a crash.
This patch corrects this racy behavior by adding a flag to prevent
tls_device_down from calling tls_dev_del the second time.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20201125221810.69870-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When devlink reload operation is not used, netdev of an Ethernet port may
be present in different net namespace than the net namespace of the
devlink instance.
Ensure that both the devlink instance and devlink port netdev are located
in same net namespace.
Fixes: 070c63f20f6c ("net: devlink: allow to change namespaces during reload")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A netdevice of a devlink port can be moved to different net namespace
than its parent devlink instance.
This scenario occurs when devlink reload is not used.
When netdevice is undergoing migration to net namespace, its ifindex
and name may change.
In such use case, devlink port query may read stale netdev attributes.
Fix it by reading them under rtnl lock.
Fixes: bfcd3a466172 ("Introduce devlink infrastructure")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are reports wrt lockdep splat in nftables, e.g.:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 31416 at net/netfilter/nf_tables_api.c:622
lockdep_nfnl_nft_mutex_not_held+0x28/0x38 [nf_tables]
...
These are caused by an earlier, unrelated bug such as a n ABBA deadlock
in a different subsystem.
In such an event, lockdep is disabled and lockdep_is_held returns true
unconditionally. This then causes the WARN() in nf_tables.
Make the WARN conditional on lockdep still active to avoid this.
Fixes: f102d66b335a417 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/linux-kselftest/CA+G9fYvFUpODs+NkSYcnwKnXm62tmP=ksLeBPmB+KFrB2rvCtQ@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot found that we are not validating user input properly
before copying 16 bytes [1].
Using NLA_BINARY in ipaddr_policy[] for IPv6 address is not correct,
since it ensures at most 16 bytes were provided.
We should instead make sure user provided exactly 16 bytes.
In old kernels (before v4.20), fix would be to remove the NLA_BINARY,
since NLA_POLICY_EXACT_LEN() was not yet available.
[1]
BUG: KMSAN: uninit-value in hash_ip6_add+0x1cba/0x3a50 net/netfilter/ipset/ip_set_hash_gen.h:892
CPU: 1 PID: 11611 Comm: syz-executor.0 Not tainted 5.10.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197
hash_ip6_add+0x1cba/0x3a50 net/netfilter/ipset/ip_set_hash_gen.h:892
hash_ip6_uadt+0x976/0xbd0 net/netfilter/ipset/ip_set_hash_ip.c:267
call_ad+0x329/0xd00 net/netfilter/ipset/ip_set_core.c:1720
ip_set_ad+0x111f/0x1440 net/netfilter/ipset/ip_set_core.c:1808
ip_set_uadd+0xf6/0x110 net/netfilter/ipset/ip_set_core.c:1833
nfnetlink_rcv_msg+0xc7d/0xdf0 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x70a/0x820 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x4f0/0x4380 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x11da/0x14b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x173c/0x1840 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45deb9
Code: 0d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe2e503fc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000029ec0 RCX: 000000000045deb9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003
RBP: 000000000118bf60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118bf2c
R13: 000000000169fb7f R14: 00007fe2e50409c0 R15: 000000000118bf2c
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
kmsan_internal_chain_origin+0xad/0x130 mm/kmsan/kmsan.c:289
__msan_chain_origin+0x57/0xa0 mm/kmsan/kmsan_instr.c:147
ip6_netmask include/linux/netfilter/ipset/pfxlen.h:49 [inline]
hash_ip6_netmask net/netfilter/ipset/ip_set_hash_ip.c:185 [inline]
hash_ip6_uadt+0xb1c/0xbd0 net/netfilter/ipset/ip_set_hash_ip.c:263
call_ad+0x329/0xd00 net/netfilter/ipset/ip_set_core.c:1720
ip_set_ad+0x111f/0x1440 net/netfilter/ipset/ip_set_core.c:1808
ip_set_uadd+0xf6/0x110 net/netfilter/ipset/ip_set_core.c:1833
nfnetlink_rcv_msg+0xc7d/0xdf0 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x70a/0x820 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x4f0/0x4380 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x11da/0x14b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x173c/0x1840 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
kmsan_internal_chain_origin+0xad/0x130 mm/kmsan/kmsan.c:289
kmsan_memcpy_memmove_metadata+0x25e/0x2d0 mm/kmsan/kmsan.c:226
kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:246
__msan_memcpy+0x46/0x60 mm/kmsan/kmsan_instr.c:110
ip_set_get_ipaddr6+0x2cb/0x370 net/netfilter/ipset/ip_set_core.c:310
hash_ip6_uadt+0x439/0xbd0 net/netfilter/ipset/ip_set_hash_ip.c:255
call_ad+0x329/0xd00 net/netfilter/ipset/ip_set_core.c:1720
ip_set_ad+0x111f/0x1440 net/netfilter/ipset/ip_set_core.c:1808
ip_set_uadd+0xf6/0x110 net/netfilter/ipset/ip_set_core.c:1833
nfnetlink_rcv_msg+0xc7d/0xdf0 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x70a/0x820 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x4f0/0x4380 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x11da/0x14b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x173c/0x1840 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
kmsan_internal_poison_shadow+0x5c/0xf0 mm/kmsan/kmsan.c:104
kmsan_slab_alloc+0x8d/0xe0 mm/kmsan/kmsan_hooks.c:76
slab_alloc_node mm/slub.c:2906 [inline]
__kmalloc_node_track_caller+0xc61/0x15f0 mm/slub.c:4512
__kmalloc_reserve net/core/skbuff.c:142 [inline]
__alloc_skb+0x309/0xae0 net/core/skbuff.c:210
alloc_skb include/linux/skbuff.h:1094 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1176 [inline]
netlink_sendmsg+0xdb8/0x1840 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
After cited commit, gro_cells_destroy() became damn slow
on hosts with a lot of cores.
This is because we have one additional synchronize_net() per cpu as
stated in the changelog.
gro_cells_init() is setting NAPI_STATE_NO_BUSY_POLL, and this was enough
to not have one synchronize_net() call per netif_napi_del()
We can factorize all the synchronize_net() to a single one,
right before freeing per-cpu memory.
Fixes: 5198d545dba8 ("net: remove napi_hash_del() from driver-facing API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201124203822.1360107-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kmemleak report a memory leak as follows:
unreferenced object 0xffff8880059c6a00 (size 64):
comm "ip", pid 23696, jiffies 4296590183 (age 1755.384s)
hex dump (first 32 bytes):
20 01 00 10 00 00 00 00 00 00 00 00 00 00 00 00 ...............
1c 00 00 00 00 00 00 00 00 00 00 00 07 00 00 00 ................
backtrace:
[<00000000aa4e7a87>] ip6addrlbl_add+0x90/0xbb0
[<0000000070b8d7f1>] ip6addrlbl_net_init+0x109/0x170
[<000000006a9ca9d4>] ops_init+0xa8/0x3c0
[<000000002da57bf2>] setup_net+0x2de/0x7e0
[<000000004e52d573>] copy_net_ns+0x27d/0x530
[<00000000b07ae2b4>] create_new_namespaces+0x382/0xa30
[<000000003b76d36f>] unshare_nsproxy_namespaces+0xa1/0x1d0
[<0000000030653721>] ksys_unshare+0x3a4/0x780
[<0000000007e82e40>] __x64_sys_unshare+0x2d/0x40
[<0000000031a10c08>] do_syscall_64+0x33/0x40
[<0000000099df30e7>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
We should free all rules when we catch an error in ip6addrlbl_net_init().
otherwise a memory leak will occur.
Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201124071728.8385-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- set module owner to THIS_MODULE, by Taehee Yoo
* tag 'batadv-net-pullrequest-20201124' of git://git.open-mesh.org/linux-merge:
batman-adv: set .owner to THIS_MODULE
====================
Link: https://lore.kernel.org/r/20201124134417.17269-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a BPF program is used to select between a type of TCP congestion
control algorithm that uses either ECN or not there is a case where the
synack for the frame was coming up without the ECT0 bit set. A bit of
research found that this was due to the final socket being configured to
dctcp while the listener socket was staying in cubic.
To reproduce it all that is needed is to monitor TCP traffic while running
the sample bpf program "samples/bpf/tcp_cong_kern.c". What is observed,
assuming tcp_dctcp module is loaded or compiled in and the traffic matches
the rules in the sample file, is that for all frames with the exception of
the synack the ECT0 bit is set.
To address that it is necessary to make one additional call to
tcp_bpf_ca_needs_ecn using the request socket and then use the output of
that to set the ECT0 bit for the tos/tclass of the packet.
Fixes: 91b5b21c7c16 ("bpf: Add support for changing congestion control")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/160593039663.2604.1374502006916871573.stgit@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY")
addressed the problem that packets were discarded from the Tx AF_XDP
ring, when the driver returned NETDEV_TX_BUSY. Part of the fix was
bumping the skbuff reference count, so that the buffer would not be
freed by dev_direct_xmit(). A reference count larger than one means
that the skbuff is "shared", which is not the case.
If the "shared" skbuff is sent to the generic XDP receive path,
netif_receive_generic_xdp(), and pskb_expand_head() is entered the
BUG_ON(skb_shared(skb)) will trigger.
This patch adds a variant to dev_direct_xmit(), __dev_direct_xmit(),
where a user can select the skbuff free policy. This allows AF_XDP to
avoid bumping the reference count, but still keep the NETDEV_TX_BUSY
behavior.
Fixes: 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201123175600.146255-1-bjorn.topel@gmail.com
|
|
Fix reload stats structure exposed to the user. Change stats structure
hierarchy to have the reload action as a parent of the stat entry and
then stat entry includes value per limit. This will also help to avoid
string concatenation on iproute2 output.
Reload stats structure before this fix:
"stats": {
"reload": {
"driver_reinit": 2,
"fw_activate": 1,
"fw_activate_no_reset": 0
}
}
After this fix:
"stats": {
"reload": {
"driver_reinit": {
"unspecified": 2
},
"fw_activate": {
"unspecified": 1,
"no_reset": 0
}
}
Fixes: a254c264267e ("devlink: Add reload stats")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/1606109785-25197-1-git-send-email-moshe@mellanox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the patchset merged by commit b9fcf0a0d826
("Merge branch 'support-AF_PACKET-for-layer-3-devices'") L3 devices which
did not have header_ops were given one for the purpose of protocol parsing
on af_packet transmit path.
That change made af_packet receive path regard these devices as having a
visible L3 header and therefore aligned incoming skb->data to point to the
skb's mac_header. Some devices, such as ipip, xfrmi, and others, do not
reset their mac_header prior to ingress and therefore their incoming
packets became malformed.
Ideally these devices would reset their mac headers, or af_packet would be
able to rely on dev->hard_header_len being 0 for such cases, but it seems
this is not the case.
Fix by changing af_packet RX ll visibility criteria to include the
existence of a '.create()' header operation, which is used when creating
a device hard header - via dev_hard_header() - by upper layers, and does
not exist in these L3 devices.
As this predicate may be useful in other situations, add it as a common
dev_has_header() helper in netdevice.h.
Fixes: b9fcf0a0d826 ("Merge branch 'support-AF_PACKET-for-layer-3-devices'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201121062817.3178900-1-eyal.birger@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting from commit 8692cefc433f ("virtio_vsock: Fix race condition
in virtio_transport_recv_pkt"), we discard packets in
virtio_transport_recv_pkt() if the socket has been released.
When the socket is connected, we schedule a delayed work to wait the
RST packet from the other peer, also if SHUTDOWN_MASK is set in
sk->sk_shutdown.
This is done to complete the virtio-vsock shutdown algorithm, releasing
the port assigned to the socket definitively only when the other peer
has consumed all the packets.
If we discard the RST packet received, the socket will be closed only
when the VSOCK_CLOSE_TIMEOUT is reached.
Sergio discovered the issue while running ab(1) HTTP benchmark using
libkrun [1] and observing a latency increase with that commit.
To avoid this issue, we discard packet only if the socket is really
closed (SOCK_DONE flag is set).
We also set SOCK_DONE in virtio_transport_release() when we don't need
to wait any packets from the other peer (we didn't schedule the delayed
work). In this case we remove the socket from the vsock lists, releasing
the port assigned.
[1] https://github.com/containers/libkrun
Fixes: 8692cefc433f ("virtio_vsock: Fix race condition in virtio_transport_recv_pkt")
Cc: justin.he@arm.com
Reported-by: Sergio Lopez <slp@redhat.com>
Tested-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jia He <justin.he@arm.com>
Link: https://lore.kernel.org/r/20201120104736.73749-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the TCP stack is in SYN flood mode, the server child socket is
created from the SYN cookie received in a TCP packet with the ACK flag
set.
The child socket is created when the server receives the first TCP
packet with a valid SYN cookie from the client. Usually, this packet
corresponds to the final step of the TCP 3-way handshake, the ACK
packet. But is also possible to receive a valid SYN cookie from the
first TCP data packet sent by the client, and thus create a child socket
from that SYN cookie.
Since a client socket is ready to send data as soon as it receives the
SYN+ACK packet from the server, the client can send the ACK packet (sent
by the TCP stack code), and the first data packet (sent by the userspace
program) almost at the same time, and thus the server will equally
receive the two TCP packets with valid SYN cookies almost at the same
instant.
When such event happens, the TCP stack code has a race condition that
occurs between the momement a lookup is done to the established
connections hashtable to check for the existence of a connection for the
same client, and the moment that the child socket is added to the
established connections hashtable. As a consequence, this race condition
can lead to a situation where we add two child sockets to the
established connections hashtable and deliver two sockets to the
userspace program to the same client.
This patch fixes the race condition by checking if an existing child
socket exists for the same client when we are adding the second child
socket to the established connections socket. If an existing child
socket exists, we drop the packet and discard the second child socket
to the same client.
Signed-off-by: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix incorrect netdev reference count in xsk_bind operation. Incorrect
reference count of the device appears when a user calls bind with the
XDP_ZEROCOPY flag on an interface which does not support zero-copy.
In such a case, an error is returned but the reference count is not
decreased. This change fixes the fault, by decreasing the reference count
in case of such an error.
The problem being corrected appeared in '162c820ed896' for the first time,
and the code was moved to new file location over the time with commit
'c2d3d6a47462'. This specific patch applies to all version starting
from 'c2d3d6a47462'. The same solution should be applied but on different
file (net/xdp/xdp_umem.c) and function (xdp_umem_assign_dev) for versions
from '162c820ed896' to 'c2d3d6a47462' excluded.
Fixes: 162c820ed896 ("xdp: hold device for umem regardless of zero-copy mode")
Signed-off-by: Marek Majtyka <marekx.majtyka@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201120151443.105903-1-marekx.majtyka@intel.com
|
|
Child sockets erroneously inherit their parent's sk_type (ie. SOCK_*),
instead of the PF_IUCV protocol that the parent was created with in
iucv_sock_create().
We're currently not using sk->sk_protocol ourselves, so this shouldn't
have much impact (except eg. getting the output in skb_dump() right).
Fixes: eac3731bd04c ("[S390]: Add AF_IUCV socket support")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Link: https://lore.kernel.org/r/20201120100657.34407-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When setting congestion control via a BPF program it is seen that the
SYN/ACK for packets within a given flow will not include the ECT0 flag. A
bit of simple printk debugging shows that when this is configured without
BPF we will see the value INET_ECN_xmit value initialized in
tcp_assign_congestion_control however when we configure this via BPF the
socket is in the closed state and as such it isn't configured, and I do not
see it being initialized when we transition the socket into the listen
state. The result of this is that the ECT0 bit is configured based on
whatever the default state is for the socket.
Any easy way to reproduce this is to monitor the following with tcpdump:
tools/testing/selftests/bpf/test_progs -t bpf_tcp_ca
Without this patch the SYN/ACK will follow whatever the default is. If dctcp
all SYN/ACK packets will have the ECT0 bit set, and if it is not then ECT0
will be cleared on all SYN/ACK packets. With this patch applied the SYN/ACK
bit matches the value seen on the other packets in the given stream.
Fixes: 91b5b21c7c16 ("bpf: Add support for changing congestion control")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An issue was recently found where DCTCP SYN/ACK packets did not have the
ECT bit set in the L3 header. A bit of code review found that the recent
change referenced below had gone though and added a mask that prevented the
ECN bits from being populated in the L3 header.
This patch addresses that by rolling back the mask so that it is only
applied to the flags coming from the incoming TCP request instead of
applying it to the socket tos/tclass field. Doing this the ECT bits were
restored in the SYN/ACK packets in my testing.
One thing that is not addressed by this patch set is the fact that
tcp_reflect_tos appears to be incompatible with ECN based congestion
avoidance algorithms. At a minimum the feature should likely be documented
which it currently isn't.
Fixes: ac8f1710c12b ("tcp: reflect tos value received in SYN to the socket")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case when tcp socket received FIN after some data and the
parser haven't started before reading data caller will receive
an empty buffer. This behavior differs from plain TCP socket and
leads to special treating in user-space.
The flow that triggers the race is simple. Server sends small
amount of data right after the connection is configured to use TLS
and closes the connection. In this case receiver sees TLS Handshake
data, configures TLS socket right after Change Cipher Spec record.
While the configuration is in process, TCP socket receives small
Application Data record, Encrypted Alert record and FIN packet. So
the TCP socket changes sk_shutdown to RCV_SHUTDOWN and sk_flag with
SK_DONE bit set. The received data is not parsed upon arrival and is
never sent to user-space.
Patch unpauses parser directly if we have unparsed data in tcp
receive queue.
Fixes: fcf4793e278e ("tls: check RCV_SHUTDOWN in tls_wait_data")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1605801588-12236-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rose_send_frame() dereferences `neigh->dev` when called from
rose_transmit_clear_request(), and the first occurrence of the
`neigh` is in rose_loopback_timer() as `rose_loopback_neigh`,
and it is initialized in rose_add_loopback_neigh() as NULL.
i.e when `rose_loopback_neigh` used in rose_loopback_timer()
its `->dev` was still NULL and rose_loopback_timer() was calling
rose_rx_call_request() without checking for NULL.
- net/rose/rose_link.c
This bug seems to get triggered in this line:
rose_call = (ax25_address *)neigh->dev->dev_addr;
Fix it by adding NULL checking for `rose_loopback_neigh->dev`
in rose_loopback_timer().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: syzbot+a1c743815982d9496393@syzkaller.appspotmail.com
Tested-by: syzbot+a1c743815982d9496393@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=9d2a7ca8c7f2e4b682c97578dfa3f236258300b3
Signed-off-by: Anmol Karn <anmol.karan123@gmail.com>
Link: https://lore.kernel.org/r/20201119191043.28813-1-anmol.karan123@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a bug that is triggered when a partially setup socket is
destroyed. For a fully setup socket, a socket that has been bound to a
device, the cleanup of the umem is performed at the end of the buffer
pool's cleanup work queue item. This has to be performed in a work
queue, and not in RCU cleanup, as it is doing a vunmap that cannot
execute in interrupt context. However, when a socket has only been
partially set up so that a umem has been created but the buffer pool
has not, the code erroneously directly calls the umem cleanup function
instead of using a work queue, and this leads to a BUG_ON() in
vunmap().
As there in this case is no buffer pool, we cannot use its work queue, |
