summaryrefslogtreecommitdiffstats
path: root/net/wireless
AgeCommit message (Collapse)Author
2014-03-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-03-20Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-03-19cfg80211: remove macro ASSERT_RDEV_LOCK(rdev)Zhao, Gang
Macro ASSERT_RDEV_LOCK(rdev) is equal to ASSERT_RTNL(), so replace it with ASSERT_RTNL() and remove it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-19cfg80211: remove unnecessary checkZhao, Gang
RCU pointer bss->pub.beacon_ies is checked before in previous statement: if (rcu_access_pointer(bss->pub.beacon_ies)) continue; There is no need to check it twice(and in the wrong way :) ). Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-19cfg80211/mac80211: ignore signal if the frame was heard on wrong channelEmmanuel Grumbach
On 2.4Ghz band, the channels overlap since the delta between different channels is 5Mhz while the width of the receiver is 20Mhz (at least). This means that we can hear beacons or probe responses from adjacent channels. These frames will have a significant lower RSSI which will feed all kinds of logic with inaccurate data. An obvious example is the roaming algorithm that will think our AP is getting weak and will try to move to another AP. In order to avoid this, update the signal only if the frame has been heard on the same channel as the one advertised by the AP in its DS / HT IEs. We refrain from updating the values only if the AP is already in the BSS list so that we will still have a valid (but inaccurate) value if the AP was heard on an adjacent channel only. To achieve this, stop taking the channel from DS / HT IEs in mac80211. The DS / HT IEs is taken into account to discard the frame if it was received on a disabled channel. This can happen due to the same phenomenon: the frame is sent on channel 12, but heard on channel 11 while channel 12 can be disabled on certain devices. Since this check is done in cfg80211, stop even checking this in mac80211. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [remove unused rx_freq variable] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-19cfg80211: make __cfg80211_join_ibss() staticZhao, Gang
Function __cfg80211_join_ibss() is only used in net/wireless/ibss.c, so make it static. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/r8152.c drivers/net/xen-netback/netback.c Both the r8152 and netback conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/ath/ath9k/recv.c
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-04cfg80211: add MPLS and 802.21 classificationSimon Wunderlich
MPLS labels may contain traffic control information, which should be evaluated and used by the wireless subsystem if present. Also check for IEEE 802.21 which is always network control traffic. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c
2014-03-03cfg80211: allow reprocessing of pending requestsLuis R. Rodriguez
In certain situations we want to trigger reprocessing of the last regulatory hint. One situation in which this makes sense is the case where the cfg80211 was built-in to the kernel, CFG80211_INTERNAL_REGDB was not enabled and the CRDA binary is on a partition not availble during early boot. In such a case we want to be able to re-process the same request at some other point. When we are asked to re-process the same request we need to be careful to not kfree it, addresses that. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [rename function] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-03cfg80211: remove racy beacon_interval assignmentJohannes Berg
In case of AP mode, the beacon interval is already reset to zero inside cfg80211_stop_ap(), and in the other modes it isn't relevant. Remove the assignment to remove a potential race since the assignment isn't properly locked. Reported-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: send stop AP event only due to internal reasonIlan Peer
Commit "nl80211: send event when AP operation is stopped" added an event to notify user space that an AP interface has been stopped, to handle cases such as suspend etc. The event is sent regardless if the stop AP flow was triggered by user space or due to internal state change. This might cause issues with wpa_supplicant/hostapd flows that consider stop AP flow as a synchronous one, e.g., AP/GO channel change in the absence of CSA support. In such cases, the flow will restart the AP immediately after the stop AP flow is done, and only handle the stop AP event after the current flow is done, and as a result stop the AP again. Change the current implementation to only send the event in case the stop AP was triggered due to an internal reason. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: DFS get CAC time from regulatory databaseJanusz Dziedzic
Send Channel Availability Check time as a parameter of start_radar_detection() callback. Get CAC time from regulatory database. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: regulatory: allow getting DFS CAC time from userspaceJanusz Dziedzic
Introduce DFS CAC time as a regd param, configured per REG_RULE and set per channel in cfg80211. DFS CAC time is close connected with regulatory database configuration. Instead of using hardcoded values, get DFS CAC time form regulatory database. Pass DFS CAC time to user mode (mainly for iw reg get, iw list, iw info). Allow setting DFS CAC time via CRDA. Add support for internal regulatory database. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [rewrap commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: regulatory: allow user to set world regdomainJanusz Dziedzic
Allow to set world regulatory domain in case of user request (iw reg set 00). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: regulatory: reset regdomain in case of errorJanusz Dziedzic
Reset regdomain to world regdomain in case of errors in set_regdom() function. This will fix a problem with such scenario: - iw reg set US - iw reg set 00 - iw reg set US The last step always fail and we get deadlock in kernel regulatory code. Next setting new regulatory wasn't possible due to: Pending regulatory request, waiting for it to be processed... Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Acked-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: regulatory: simplify uevent sendingJohannes Berg
There's no need for the struct device_type with the uevent function etc., just fill the country alpha2 when sending the event. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21cfg80211: remove radar requirements check from cfg80211_can_use_iftype_chan()Luciano Coelho
We don't have to double check whether the parameters passed to cfg80211_can_use_iftype_chan() are correct. We should just make sure they *are* when we call this function. Remove the radar_detect argument check in cfg80211_can_use_iftype_chan() to simplify the code. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> [keep braces around a long comment + single statement] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21nl80211: make sure we check for DFS with mesh channel switchLuciano Coelho
Since mesh support for DFS channels was added, we also need to check for DFS channels when performing a channel switch with NL80211_IFTYPE_MESHPOINT. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> [use switch statement, slight code cleanup] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21cfg80211: regulatory: introduce NL80211_RRF_AUTO_BW rule flagJanusz Dziedzic
Introduce NL80211_RRF_AUTO_BW rule flag. If this flag set maximum available bandwidth should be calculated base on contiguous rules and wider channels will be allowed to cross multiple contiguous/overlapping frequency ranges. In case of old kernels maximum bandwidth from regulatory rule will be used, while there is no NL80211_RRF_AUTO_BW flag. This fixes the previous commit 9752482083066af7ac18a5ca376f ("cfg80211: regulatory introduce maximum bandwidth calculation") which was found to be a problem for userspace API compatibility. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [edit commit log, use sizeof()] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-02-20cfg80211: Pass TDLS peer capability information in tdls_mgmtSunil Dutt Undekari
While framing the TDLS Setup Confirmation frame, the driver needs to know if the TDLS peer is VHT/HT/WMM capable and thus shall construct the VHT/HT operation / WMM parameter elements accordingly. Supplicant determines if the TDLS peer is VHT/HT/WMM capable based on the presence of the respective IEs in the received TDLS Setup Response frame. The host driver should not need to parse the received TDLS Response frame and thus, should be able to rely on the supplicant to indicate the capability of the peer through additional flags while transmitting the TDLS Setup Confirmation frame through tdls_mgmt operations. Signed-off-by: Sunil Dutt Undekari <usdutt@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg
2014-02-19cfg80211: bugfix in regulatory user hint processInbal Hacohen
After processing hint_user, we would want to schedule the timeout work only if we are actually waiting to CRDA. This happens when the status is not "IGNORE" nor "ALREADY_SET". Signed-off-by: Inbal Hacohen <Inbal.Hacohen@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-13net: remove unnecessary return'sstephen hemminger
One of my pet coding style peeves is the practice of adding extra return; at the end of function. Kill several instances of this in network code. I suppose some coccinelle wizardy could do this automatically. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-02-12nl80211: use ie_len in scheduled scanJohannes Berg
We've already checked the IE length and assigned request->ie based on that, so continue using it to make the code a bit clearer. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-12cfg80211: remove NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNELJohannes Berg
There's no driver using this flag and consequently no userspace application is actually looking at it. As it seems unlikely for any driver to start using it, remove it and the (very little) code that used it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06cfg80211: send scan results from work queueJohannes Berg
Due to the previous commit, when a scan finishes, it is in theory possible to hit the following sequence: 1. interface starts being removed 2. scan is cancelled by driver and cfg80211 is notified 3. scan done work is scheduled 4. interface is removed completely, rdev->scan_req is freed, event sent to userspace but scan done work remains pending 5. new scan is requested on another virtual interface 6. scan done work runs, freeing the still-running scan To fix this situation, hang on to the scan done message and block new scans while that is the case, and only send the message from the work function, regardless of whether the scan_req is already freed from interface removal. This makes step 5 above impossible and changes step 6 to be 5. scan done work runs, sending the scan done message As this can't work for wext, so we send the message immediately, but this shouldn't be an issue since we still return -EBUSY. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06cfg80211: fix scan done raceJohannes Berg
When an interface/wdev is removed, any ongoing scan should be cancelled by the driver. This will make it call cfg80211, which only queues a work struct. If interface/wdev removal is quick enough, this can leave the scan request pending and processed only after the interface is gone, causing a use-after-free. Fix this by making sure the scan request is not pending after the interface is destroyed. We can't flush or cancel the work item due to locking concerns, but when it'll run it shouldn't find anything to do. This leaves a potential issue, if a new scan gets requested before the work runs, it prematurely stops the running scan, potentially causing another crash. I'll fix that in the next patch. This was particularly observed with P2P_DEVICE wdevs, likely because freeing them is quicker than freeing netdevs. Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Fixes: 4a58e7c38443 ("cfg80211: don't "leak" uncompleted scans") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06cfg80211: re-enable 5/10 MHz supportJohannes Berg
Unfortunately I forgot this during the merge window, but the patch seems small enough to go in as a fix. The userspace API bug that was the reason for disabling it has long been fixed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06nl80211: Reset split_start when netlink skb is exhaustedPontus Fuchs
When the netlink skb is exhausted split_start is left set. In the subsequent retry, with a larger buffer, the dump is continued from the failing point instead of from the beginning. This was causing my rt28xx based USB dongle to now show up when running "iw list" with an old iw version without split dump support. Cc: stable@vger.kernel.org Fixes: 3713b4e364ef ("nl80211: allow splitting wiphy information in dumps") Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> [avoid the entire workaround when state->split is set] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-05cfg80211: regulatory introduce maximum bandwidth calculationJanusz Dziedzic
In case we will get regulatory request with rule where max_bandwidth_khz is set to 0 handle this case as a special one. If max_bandwidth_khz == 0 we should calculate maximum available bandwidth base on all frequency contiguous rules. In case we need auto calculation we just have to set: country PL: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ AUTO), (N/A, 20) (5250 - 5330 @ AUTO), (N/A, 20), DFS (5490 - 5710 @ 80), (N/A, 27), DFS This mean we will calculate maximum bw for rules where AUTO (N/A) were set, 160MHz (5330 - 5170) in example above. So we will get: (5170 - 5250 @ 160), (N/A, 20) (5250 - 5330 @ 160), (N/A, 20), DFS In other case: country FR: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ AUTO), (N/A, 20) (5250 - 5330 @ 80), (N/A, 20), DFS (5490 - 5710 @ 80), (N/A, 27), DFS We will get 80MHz (5250 - 5170): (5170 - 5250 @ 80), (N/A, 20) (5250 - 5330 @ 80), (N/A, 20), DFS Base on this calculations we will set correct channel bandwidth flags (eg. IEEE80211_CHAN_NO_80MHZ). We don't need any changes in CRDA or internal regulatory. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [extend nl80211 description a bit, fix typo] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04cfg80211: consider existing DFS interfacesMichal Kazior
It was possible to break interface combinations in the following way: combo 1: iftype = AP, num_ifaces = 2, num_chans = 2, combo 2: iftype = AP, num_ifaces = 1, num_chans = 1, radar = HT20 With the above interface combinations it was possible to: step 1. start AP on DFS channel by matching combo 2 step 2. start AP on non-DFS channel by matching combo 1 This was possible beacuse (step 2) did not consider if other interfaces require radar detection. The patch changes how cfg80211 tracks channels - instead of channel itself now a complete chandef is stored. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04cfg80211: fix channel configuration in IBSS joinAntonio Quartulli
When receiving an IBSS_JOINED event select the BSS object based on the {bssid, channel} couple rather than the bssid only. With the current approach if another cell having the same BSSID (but using a different channel) exists then cfg80211 picks up the wrong BSS object. The result is a mismatching channel configuration between cfg80211 and the driver, that can lead to any sort of problem. The issue can be triggered by having an IBSS sitting on given channel and then asking the driver to create a new cell using the same BSSID but with a different frequency. By passing the channel to cfg80211_get_bss() we can solve this ambiguity and retrieve/create the correct BSS object. All the users of cfg80211_ibss_joined() have been changed accordingly. Moreover WARN when cfg80211_ibss_joined() gets a NULL channel as argument and remove a bogus call of the same function in ath6kl (it does not make sense to call cfg80211_ibss_joined() with a zero BSSID on ibss-leave). Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Bing Zhao <bzhao@marvell.com> Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi> Cc: libertas-dev@lists.infradead.org Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> [minor code cleanup in ath6kl] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04net: wireless: move regulatory timeout work to power efficient workqueueShaibal Dutta
For better use of CPU idle time, allow the scheduler to select the CPU on which the timeout work of regulatory settings would be executed. This extends CPU idle residency time and saves power. This functionality is enabled when CONFIG_WQ_POWER_EFFICIENT is selected. Cc: "John W. Linville" <linville@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Shaibal Dutta <shaibal.dutta@broadcom.com> [zoran.markovic@linaro.org: Rebased to latest kernel. Added commit message.] Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04cfg80211: add helper reg_get_regdomain() functionJanusz Dziedzic
Add helper function that will return regdomain. Follow the driver's regulatory domain, if present, unless a country IE has been processed or a user wants to help compliance further. Signed-off-by: Janusz Dziedzic <janusz.dziedzi@tieto.com> [remove useless reg variable] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04cfg80211: set preset_chandef after channel switchJanusz Dziedzic
Set preset_chandef in channel switch notification. In other case we will have old preset_chandef. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04nl80211: fix scheduled scan RSSI matchset attribute confusionJohannes Berg
The scheduled scan matchsets were intended to be a list of filters, with the found BSS having to pass at least one of them to be passed to the host. When the RSSI attribute was added, however, this was broken and currently wpa_supplicant adds that attribute in its own matchset; however, it doesn't intend that to mean that anything that passes the RSSI filter should be passed to the host, instead it wants it to mean that everything needs to also have higher RSSI. This is semantically problematic because we have a list of filters like [ SSID1, SSID2, SSID3, RSSI ] with no real indication which one should be OR'ed and which one AND'ed. To fix this, move the RSSI filter attribute into each matchset. As we need to stay backward compatible, treat a matchset with only the RSSI attribute as a "default RSSI filter" for all other matchsets, but only if there are other matchsets (an RSSI-only matchset by itself is still desirable.) To make driver implementation easier, keep a global min_rssi_thold for the entire request as well. The only affected driver is ath6kl. I found this when I looked into the code after Raja Mani submitted a patch fixing the n_match_sets calculation to disregard the RSSI, but that patch didn't address the semantic issue. Reported-by: Raja Mani <rmani@qti.qualcomm.com> Acked-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04nl80211: send event when AP operation is stoppedJohannes Berg
There are a few cases, e.g. suspend, where an AP interface is stopped by the kernel rather than by userspace request, most commonly when suspending. To let userspace know about this, send the NL80211_CMD_STOP_AP command as an event every time an AP interface is stopped. This also happens when userspace did in fact request the AP stop, but that's not a problem. For full-MAC drivers this may need to be extended to also cover cases where the device stopped the AP operation for some reason, this a bit more complicated because then all cfg80211 state also needs to be reset; such API is not part of this patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04nl80211: check nla_parse() return valuesJohannes Berg
If there's a policy, then nla_parse() return values must be checked, otherwise the policy is useless and there's nothing that ensures the attributes are actually what we expect them to be. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04cfg80211: make device_type constJohannes Berg
Instances of struct device_type are never modified, make them const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04nl80211: make netlink attribute policies constJohannes Berg
There's no reason for netlink attribute policies to be __read_mostly, they can just be const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04nl80211: check channel switch validity betterJohannes Berg
Before allowing userspace to initiate a channel switch, check that it's actually connected in some sense. Also use a more appropriate error code for the not connected case. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04cfg80211: fix few minor issues in reg_process_hint()Ilan Peer
Fix the following issues in reg_process_hint(): 1. Add verification that wiphy is valid before processing NL80211_REGDOMAIN_SET_BY_COUNTRY_IE. 2. Free the request in case of invalid initiator. 3. Remove WARN_ON check on reg_request->alpha2 as it is not a pointer. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04nl80211: add Guard Interval support for set_bitrate_maskJanusz Dziedzic
Allow to force SGI, LGI. Mainly for test purpose. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04cfg80211: Clean up connect params and channel fetchingJouni Malinen
Addition of the frequency hints showed up couple of places in cfg80211 where pointers could be marked const and a shared function could be used to fetch a valid channel. Signed-off-by: Jouni Malinen <j@w1.fi> [fix mwifiex] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04cfg80211: Advertise maximum associated STAs in AP modeJouni Malinen
This allows drivers to advertise the maximum number of associated stations they support in AP mode (including P2P GO). User space applications can use this for cleaner way of handling the limit (e.g., hostapd rejecting IEEE 802.11 authentication without manual configuration of the limit) or to figure out what type of use cases can be executed with multiple devices before trying and failing. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>