summaryrefslogtreecommitdiffstats
path: root/net/tipc
AgeCommit message (Collapse)Author
2012-04-30tipc: compress out gratuitous extra carriage returnsPaul Gortmaker
Some of the comment blocks are floating in limbo between two functions, or between blocks of code. Delete the extra line feeds between any comment and its associated following block of code, to be consistent with the majority of the rest of the kernel. Also delete trailing newlines at EOF and fix a couple trivial typos in existing comments. This is a 100% cosmetic change with no runtime impact. We get rid of over 500 lines of non-code, and being blank line deletes, they won't even show up as noise in git blame. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-27tipc: Reject payload messages with invalid message typeAllan Stephens
Adds check to ensure TIPC sockets reject incoming payload messages that have an unrecognized message type. Remove the old open question about whether TIPC_ERR_NO_PORT is the proper return value. It is appropriate here since there are valid instances where another node can make use of the reply, and at this point in time the host is already broadcasting TIPC data, so there are no real security concerns. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Enhance error checking of published namesAllan Stephens
Consolidates validation of scope and name sequence range values into a single routine where it applies both to local name publications and to name publications issued by other nodes in the network. This change means that the scope value for non-local publications is now validated and the name sequence range for local publications is now validated only once. Additionally, a publication attempt that fails validation now creates an entry in the system log file only if debugging capabilities have been enabled; this prevents the system log from being cluttered up with messages caused by a defective application or network node. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Create helper routine to delete unused name sequence structureAllan Stephens
Replaces two identical chunks of code that delete an unused name sequence structure from TIPC's name table with calls to a new routine that performs this operation. This change is cosmetic and doesn't impact the operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: remove redundant memset and stale comment from subscr.cAllan Stephens
Eliminate code to zero-out the main topology service structure, which is already zeroed-out. Get rid of a comment documenting a field of the main topology service structure that no longer exists. Both are cosmetic changes with no impact on runtime behaviour. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Optimize initialization of network topology serviceAllan Stephens
Initialization now occurs in the calling thread of control, rather than being deferred to the TIPC tasklet. With the current codebase, the deferral is no longer necessary. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Enhance re-initialization of network topology serviceAllan Stephens
Streamlines the job of re-initializing TIPC's network topology service when a node's network address is first assigned. Rather than destroying the topology server port and breaking its connections to existing subscribers, TIPC now simply lets the service continue running (since the change to the port identifier of each port used by the topology service no longer impacts the flow of messages between the service and its subscribers). This enhancement means that applications that utilize the topology service prior to the assignment of TIPC's network address no longer need to re-establish their subscriptions when the address is finally assigned. However, it is worth noting that any subsequent events for existing subscriptions report the new port identifier of the publishing port, rather than the original port identifier. (For example, a name that was previously reported as being published by <0.0.0:ref> may be subsequently withdrawn by <Z.C.N:ref>.) This doesn't impact any of the existing known userspace in tipc-utils, since (a) TIPC continues to treat references to the original port ID correctly and (b) normal use cases assign an address before active use. However if there does happen to be some rare/custom application out there that was relying on this, they can simply bypass the enhancement by issuing a subscription to {0,0} and break its connection to the topology service, if an associated withdrawal event occurs. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Optimize termination of configuration serviceAllan Stephens
Termination no longer tests to see if the configuration service port was successfully created or not. In the unlikely event that the port was not created, attempting to delete the non-existent port is detected gracefully and causes no harm. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Optimize initialization of configuration serviceAllan Stephens
Initialization now occurs in the calling thread of control, rather than being deferred to the TIPC tasklet. With the current codebase, the deferral is no longer necessary. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Optimize re-initialization of configuration serviceAllan Stephens
Streamlines the job of re-initializing TIPC's configuration service when a node's network address is first assigned. Rather than destroying the configuration server port and then recreating it, TIPC now simply withdraws the existing {0,<0.0.0>} name publication and creates a new {0,<Z.C.N>} name publication that identifies the node's network address to interested subscribers. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-24tipc: remove inline instances from C source files.Paul Gortmaker
Untie gcc's hands and let it do what it wants within the individual source files. There are two files, node.c and port.c -- only the latter effectively changes (gcc-4.5.2). Objdump shows gcc deciding to not inline port_peernode(). Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23net: add a limit parameter to sk_add_backlog()Eric Dumazet
sk_add_backlog() & sk_rcvqueues_full() hard coded sk_rcvbuf as the memory limit. We need to make this limit a parameter for TCP use. No functional change expected in this patch, all callers still using the old sk_rcvbuf limit. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19tipc: Ensure network address change doesn't impact configuration serviceAllan Stephens
Enhances command validation done by TIPC's configuration service so that it works properly even if the node's network address is changed in mid-operation. The default node address of <0.0.0> is now recognized as an alias for "this node" even after a new network address has been assigned. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Ensure network address change doesn't impact rejected messageAllan Stephens
Revises handling of a rejected message to ensure that a locally originated message is returned properly even if the node's network address is changed in mid-operation. The routine now treats the default node address of <0.0.0> as an alias for "this node" when determining where to send a returned message. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: handle <0.0.0> as an alias for this node on outgoing msgsAllan Stephens
Revises handling of send routines for payload messages to ensure that they are processed properly even if the node's network address is changed in mid-operation. The routines now treat the default node address of <0.0.0> as an alias for "this node" when determining where to send an outgoing message. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: properly handle off-node send requests with invalid addrAllan Stephens
There are two send routines that might conceivably be asked by an application to send a message off-node when the node is still using the default network address. These now have an added check that detects this and rejects the message gracefully. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: take lock while updating node network addressAllan Stephens
The routine that changes the node's network address now takes TIPC's network lock in write mode while the main address variable and associated data structures are being changed; this is needed to ensure that the link subsystem won't attempt to send a message off-node until the sending port's message header template has been updated with the node's new network address. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Ensure network address change doesn't impact local connectionsAllan Stephens
Revises routines that deal with connections between two ports on the same node to ensure the connection is not impacted if the node's network address is changed in mid-operation. The routines now treat the default node address of <0.0.0> as an alias for "this node" in the following situations: 1) Incoming messages destined to a connected port now handle the alias properly when validating that the message was sent by the expected peer port, ensuring that the message will be accepted regardless of whether it specifies the node's old network address or it's current one. 2) The code which completes connection establishment now handles the alias properly when determining if the peer port is on the same node as the connected port. An added benefit of addressing issue 1) is that some peer port validation code has been relocated to TIPC's socket subsystem, which means that validation is no longer done twice when a message is sent to a non-socket port (such as TIPC's configuration service or network topology service). Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: delete duplicate peerport/peernode helper functionsAllan Stephens
Prior to commit 23dd4cce387124ec3ea06ca30d17854ae4d9b772 "tipc: Combine port structure with tipc_port structure" there was a need for the two sets of helper functions. But now they are just duplicates. Remove the globally visible ones, and mark the remaining ones as inline. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Ensure network address change doesn't impact new portAllan Stephens
Re-orders port creation logic so that the initialization of a new port's message header template occurs while the port list lock is held. This ensures that a change to the node's network address that occurs at the same time as the port is being created does not result in the template identifying the sender using the former network address. The new approach guarantees that the new port's template is using the current network address or that it will be updated when the address changes. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Optimize re-initialization of port message header templatesAllan Stephens
Removes an unnecessary check in the logic that updates the message header template for existing ports when a node's network address is first assigned. There is no longer any need to check to see if the node's network address has actually changed since the calling routine has already verified that this is so. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Ensure network address change doesn't impact name table updatesAllan Stephens
Revises routines that add and remove an entry from a node's name table so that the publication scope lists are updated properly even if the node's network address is changed in mid-operation. The routines now recognize the default node address of <0.0.0> as an alias for "this node" even after a new network address has been assigned. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Add routines for safe checking of node's network addressAllan Stephens
Introduces routines that test whether a given network address is equal to a node's own network address or if it lies within the node's own network cluster, and which work properly regardless of whether the node is using the default network address <0.0.0> or a non-zero network address that is assigned later on. In essence, these routines ensure that address <0.0.0> is treated as an alias for "this node", regardless of which network address the node is actually using. Old users of the pre-existing more strict match in_own_cluster() have been accordingly redirected to what is now called in_own_cluster_exact() --- which does not extend matching to <0,0,0>. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Don't record failed publication attempt as a successAllan Stephens
No longer increments counter of number of publications by a node if an attempt to add a new publication fails. This prevents TIPC from incorrectly blocking future publications because the configured maximum number of publications has been reached. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Update node-scope publications when network address is assignedAllan Stephens
Ensures that node-scope name publications that exist prior to the configuration of a node's network address are properly re-initialized with that address when it is assigned. TIPC's node-scope publications are now tracked using a publications list like the lists used for cluster-scope and zone-scope publications so they can be easily updated when required. The inclusion of node scope name publications in a conventional publication list means that they must now also be withdrawn, just like cluster and zone scope publications are currently withdrawn. So some conditional tests on scope ==/!= TIPC_NODE_SCOPE are inserted/removed accordingly. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Separate cluster-scope and zone-scope names into distinct listsAllan Stephens
Utilizes distinct lists to track zone-scope and cluster-scope names published by a node. For now, TIPC continues to process the entries in both lists in the same way; however, an upcoming patch will utilize the existence of the lists to prevent the sending of cluster-scope names to nodes that are not part of the local cluster. To achieve this, an array of publication lists is introduced, so that they can be iterated over and accessed via publ->scope as an index where convenient. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-18tipc: Factor out name publication code to a separate functionAllan Stephens
This is done so that it can be reused with differing publication lists, instead of being hard coded to the cluster publicaton list. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-18tipc: introduce publication lists structAllan Stephens
There is currently a single list that is containing both cluster-scope and zone-scope publications, and the list count is a separate free floating variable. Create a struct to bind the count to the list, and to pave the way for factoring out the publications into zone/cluster/node scope. The current "publ_root" most matches what will be the cluster scope list, so it is named accordingly in this commit. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-29tipc: Optimize setting of immutable payload message header fieldsAllan Stephens
Optimizes routines that send payload messages so that they no longer update the "originating node" and "originating port" fields of the outgoing message header template, since these fields are initialized when the sending port is created and never change thereafter. Also optimizes the routine which updates the message header template when a connection to a port is established, for the same reason. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-29tipc: Eliminate obsolete code for re-sending a messageAllan Stephens
Removes code that updated the "previous node" field of an out-going message over TIPC's links. Such updating is unnecessary since the removal of the prototype multi-cluster capability means that all outgoing messages are generated locally and already have this field populated correctly. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-29tipc: Un-inline port routine for processing incoming messagesAllan Stephens
Converts a non-trivial routine from inline to non-inline form to avoid bloating the TIPC code base with 6 copies of its body. This change is essentially cosmetic, and doesn't change existing TIPC behavior. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Eliminate support for tipc_mode global variableAllan Stephens
Removes all references to the global variable that records whether TIPC is running in "single node" mode or "network" mode, since this information can be easily deduced from the global variable that records TIPC's network address. (i.e. a non-zero network address means that TIPC is running in network mode.) The changes made update most existing mode-based checks to use the network address global variable. A few checks that are no longer needed are removed entirely, along with any associated code lying on non-executable control paths. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Eliminate obsolete support for "not running" modeAllan Stephens
Removes all references to TIPC's "not running" mode, since the removal of support for the native API means that there is no longer any way to interact with TIPC if it has not been initialized. The changes made consist of removing mode-based checks that are no longer needed, along with any associated code lying on non-executable control paths. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Revert name table translation optimizationAllan Stephens
Restores name table translation using a non-zero domain that is "out of scope", which was broken by an earlier commit (5d9c54c1e9ececcf7e99c4f014f9bec7ee3a7def). Comments have now been added to the name table translation routine to make it clear that there are actually three possible outcomes to a translation request (found/not found/deferred), rather than just two (found/not found). Note that a straightforward revert of the earlier commit is not possible, as other changes to the name table translation logic have occurred since the incorrect optimization was made. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Minor optimization to broadcast link synchronization logicAllan Stephens
Optimizes processing done when contact with a neighboring node is established to avoid recording the current state of outgoing broadcast messages if the neighboring node isn't a valid broadcast link destination, since this state information isn't needed for such nodes. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Remove obsolete comments about routing table updatesAllan Stephens
Eliminates a block of comments that describe how routing table updates are to be handled. These comments no longer apply following the removal of TIPC's prototype multi-cluster support. Note that these changes are essentially cosmetic in nature, and have no impact on the actual operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Eliminate trivial buffer manipulation helper routinesAllan Stephens
Gets rid of two inlined routines that simply call existing sk_buff manipulation routines, since there is no longer any extra processing done by the helper routines. Note that these changes are essentially cosmetic in nature, and have no impact on the actual operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Hide internal details of node table implementationAllan Stephens
Relocates information about the size of TIPC's node table index and its associated hash function, since only node subsystem routines need to have access to this information. Note that these changes are essentially cosmetic in nature, and have no impact on the actual operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Eliminate a test for negative unsigned quantitiesAllan Stephens
Simplifies a comparison operation to eliminate a useless test that checks if an unsigned value is less than zero. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: nuke the delimit static inline function.Paul Gortmaker
This "shortform" is actually longer than typing out what it is really trying to do, and just makes reading the code more difficult, so lets simply shoot it in the head. In the case of log.c - the comparison is on a u32, so we can drop the check for < 0 at the same time. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Add check to prevent insertion of duplicate name table entriesAllan Stephens
Adds a new check to TIPC's name table logic to reject any attempt to create a new name publication that is identical to an existing one. (Such an attempt will never happen under normal circumstances, but could arise if another network node malfunctions and issues a duplicate name publication message.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Simplify enforcement of reserved name type prohibitionAllan Stephens
Streamlines the logic that prevents an application from binding a reserved TIPC name type to a port by moving the check to the code that handles a socket bind() operation. This allows internal TIPC subsystems to bind a reserved name without having to set an atomic flag to gain permission to use such a name. (This simplification is now possible due to the elimination of support for TIPC's native API.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Remove duplicate check of message destination nodeAllan Stephens
Eliminates a check in the processing of TIPC messages arriving from off node that ensures the message is destined for this node, since this check duplicates an earlier check. (The check would be necessary if TIPC needed to be able to route incoming messages to another node, but the elimination of multi-cluster support means that this never happens and all incoming messages are consumed by the receiving node.) Note: This change involves the elimination of a single "if" statement with a large "then" clause; consequently, a significant number of lines end up getting re-indented. In addition, a simple message header access routine that is no longer referenced is eliminated. However, the only functional change is the elimination of the single check described above. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Detect duplicate nodes using different network interfacesAllan Stephens
Utilizes the new "node signature" field in neighbor discovery messages to ensure that all links TIPC associates with a given <Z.C.N> network address belong to the same neighboring node. (Previously, TIPC could not tell if link setup requests arriving on different interfaces were from the same node or from two different nodes that has mistakenly been assigned the same network address.) The revised algorithm for detecting a duplicate node considers both the node signature and the network interface adddress specified in a request message when deciding how to respond to a link setup request. This prevents false alarms that might otherwise arise during normal network operation under the following scenarios: a) A neighboring node reboots. (The node's signature changes, but the network interface address remains unchanged.) b) A neighboring node's network interface is replaced. (The node's signature remains unchanged, but the network interface address changes.) c) A neighboring node is completely replaced. (The node's signature and network interface address both change.) The algorithm also handles cases in which a node reboots and re-establishes its links to TIPC (or begins re-establishing those links) before TIPC detects that it is using a new node signature. In such cases of "delayed rediscovery" TIPC simply accepts the new signature without disrupting communication that is already underway over the links. Thanks to Laser [gotolaser@gmail.com] for his contributions to the development of this enhancement. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Introduce node signature field in neighbor discovery messageAllan Stephens
Adds support for the new "node signature" in neighbor discovery messages, which is a 16 bit identifier chosen randomly when TIPC is initialized. This field makes it possible for nodes receiving a neighbor discovery message to detect if multiple neighboring nodes are using the same network address (i.e. <Z.C.N>), even when the messages are arriving on different interfaces. This first phase of node signature support creates the signature, incorporates it into outgoing neighbor discovery messages, and tracks the signature used by valid neighbors. An upcoming patch builds on this foundation to implement the improved duplicate neighbor detection checking. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Minor optimization to rejection of connection-based messagesAllan Stephens
Modifies message rejection logic so that TIPC doesn't attempt to send a FIN message to the rejecting port if it is known in advance that there is no such message because the rejecting port doesn't exist. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Eliminate alteration of publication key during name table purgingAllan Stephens
Removes code that alters the publication key of a name table entry that is being forcibly purged from TIPC's name table after contact with the publishing node has been lost. Current TIPC ensures that all defunct names are purged before re-establishing contact with a failed node. There used to be a risk that the publication might be accidentally deleted because it might be re-added to the name table before the purge operation was completed. But now there is no longer a need to ensure that the new key is different than the old one. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Prevent loss of fragmented messages over broadcast linkAllan Stephens
Modifies broadcast link so that an incoming fragmented message is not lost if reassembly cannot begin because there currently is no buffer big enough to hold the entire reassembled message. The broadcast link now ignores the first fragment completely, which causes the sending node to retransmit the first fragment so that reassembly can be re-attempted. Previously, the sender would have had no reason to retransmit the 1st fragment, so we would never have a chance to re-try the allocation. To do this cleanly without duplicaton, a new bclink_accept_pkt() function is introduced. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Prevent loss of fragmented messages over unicast linksAllan Stephens
Modifies unicast link endpoint logic so an incoming fragmented message is not lost if reassembly cannot begin because there is no buffer big enough to hold the entire reassembled message. The link endpoint now ignores the first fragment completely, which causes the sending node to retransmit the first fragment so that reassembly can be re-attempted. Previously, the sender would have had no reason to retransmit the 1st fragment, so we would never have a chance to re-try the allocation. Signed-off-by: Allan Stephens <allan.stephens@windriver.com>