summaryrefslogtreecommitdiffstats
path: root/net/tipc/bearer.h
AgeCommit message (Collapse)Author
2013-04-17tipc: add InfiniBand media typePatrick McHardy
Add InfiniBand media type based on the ethernet media type. The only real difference is that in case of InfiniBand, we need the entire 20 bytes of space reserved for media addresses, so the TIPC media type ID is not explicitly stored in the packet payload. Sample output of tipc-config: # tipc-config -v -addr -netid -nt=all -p -m -b -n -ls node address: <10.1.4> current network id: 4711 Type Lower Upper Port Identity Publication Scope 0 167776257 167776257 <10.1.1:1855512577> 1855512578 cluster 167776260 167776260 <10.1.4:1216454657> 1216454658 zone 1 1 1 <10.1.4:1216479235> 1216479236 node Ports: 1216479235: bound to {1,1} 1216454657: bound to {0,167776260} Media: eth ib Bearers: ib:ib0 Nodes known: <10.1.1>: up Link <broadcast-link> Window:20 packets RX packets:0 fragments:0/0 bundles:0/0 TX packets:0 fragments:0/0 bundles:0/0 RX naks:0 defs:0 dups:0 TX naks:0 acks:0 dups:0 Congestion bearer:0 link:0 Send queue max:0 avg:0 Link <10.1.4:ib0-10.1.1:ib0> ACTIVE MTU:2044 Priority:10 Tolerance:1500 ms Window:50 packets RX packets:80 fragments:0/0 bundles:0/0 TX packets:40 fragments:0/0 bundles:0/0 TX profile sample:22 packets average:54 octets 0-64:100% -256:0% -1024:0% -4096:0% -16384:0% -32768:0% -66000:0% RX states:410 probes:213 naks:0 defs:0 dups:0 TX states:410 probes:197 naks:0 acks:0 dups:0 Congestion bearer:0 link:0 Send queue max:1 avg:0 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17tipc: move bcast_addr from struct tipc_media to struct tipc_bearerPatrick McHardy
Some network protocols, like InfiniBand, don't have a fixed broadcast address but one that depends on the configuration. Move the bcast_addr to struct tipc_bearer and initialize it with the broadcast address of the network device when the bearer is enabled. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17tipc: remove unused str2addr media callbackPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-21tipc: remove the bearer congestion mechanismYing Xue
Currently at the TIPC bearer layer there is the following congestion mechanism: Once sending packets has failed via that bearer, the bearer will be flagged as being in congested state at once. During bearer congestion, all packets arriving at link will be queued on the link's outgoing buffer. When we detect that the state of bearer congestion has relaxed (e.g. some packets are received from the bearer) we will try our best to push all packets in the link's outgoing buffer until the buffer is empty, or until the bearer is congested again. However, in fact the TIPC bearer never receives any feedback from the device layer whether a send was successful or not, so it must always assume it was successful. Therefore, the bearer congestion mechanism as it exists currently is of no value. But the bearer blocking state is still useful for us. For example, when the physical media goes down/up, we need to change the state of the links bound to the bearer. So the code maintaing the state information is not removed. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-13tipc: phase out most of the struct print_buf usageErik Hugne
The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-10net: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30tipc: compress out gratuitous extra carriage returnsPaul Gortmaker
Some of the comment blocks are floating in limbo between two functions, or between blocks of code. Delete the extra line feeds between any comment and its associated following block of code, to be consistent with the majority of the rest of the kernel. Also delete trailing newlines at EOF and fix a couple trivial typos in existing comments. This is a 100% cosmetic change with no runtime impact. We get rid of over 500 lines of non-code, and being blank line deletes, they won't even show up as noise in git blame. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct bearer_name to struct tipc_bearer_namesPaul Gortmaker
The addition of the "s" to indicate pluralization is intentional, since the struct actually contains two name variants. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct link* to struct tipc_link*Paul Gortmaker
This converts the following: struct link -> struct tipc_link struct link_req -> struct tipc_link_req struct link_name -> struct tipc_link_name Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct media to struct tipc_mediaPaul Gortmaker
Give it a meaningful prefix, as suggested by DaveM, so that it is consistent with things like struct tipc_bearer, and so it isn't confused with anything else. This has no impact on the actual runtime code behaviour. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Allow run-time alteration of default link settingsAllan Stephens
Permits run-time alteration of default link settings on a per-media and per-bearer basis, in addition to the existing per-link basis. The following syntax can now be used: tipc-config -lt=<link-name|bearer-name|media-name>/<tolerance> tipc-config -lp=<link-name|bearer-name|media-name>/<priority> tipc-config -lw=<link-name|bearer-name|media-name>/<window> Note that changes to the default settings for a given media type has no effect on the default settings used by existing bearers. Similarly, changes to default bearer settings has no effect on existing link endpoints that utilize that interface. Thanks to Florian Westphal <fw@strlen.de> for his contributions to the development of this enhancement. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Hide media-specific addressing details from generic bearer codeAllan Stephens
Reworks TIPC's media address data structure and associated processing routines to transfer all media-specific details of address conversion to the associated TIPC media adaptation code. TIPC's generic bearer code now only needs to know which media type an address is associated with and whether or not it is a broadcast address, and totally ignores the "value" field that contains the actual media-specific addressing info. These changes eliminate the need for a number of endianness conversion operations and will make it easier for TIPC to support new media types in the future. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Add new address conversion routines for Ethernet mediaAllan Stephens
Enhances TIPC's Ethernet media support to provide 3 new address conversion routines, which allow TIPC to interpret an address that is in string form and to convert an address to and from the 20 byte format used in TIPC's neighbor discovery messages. These routines are pre-requisites to a follow on commit that hides all media-specific addressing details from TIPC's generic bearer code. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Improve handling of media address printing errorsAllan Stephens
Enhances conversion of a media address to printable form so that an unconvertable address will be displayed as a string of hex digits, rather than not being displayed at all. (Also removes a pointless check for the existence of the media-specific address conversion routine, since the routine is not optional.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Register new media using pre-compiled structureAllan Stephens
Speeds up the registration of TIPC media types by passing in a structure containing the required information, rather than by passing in the various fields describing the media type individually. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17tipc: Lower limits for number of bearers and media typesAllan Stephens
Reduces the number of bearers a node can support to 2, which can use identical or non-identical media. This change won't impact users, since they are currently limited to a maximum of 2 Ethernet bearers, and will save memory by eliminating a number of unused entries in TIPC's media and bearer arrays. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24tipc: Eliminate unused field in bearer structureAllan Stephens
Gets rid of counter that records the number of times a bearer has resumed after congestion or blocking, since the value is never referenced anywhere. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Remove bearer flag indicating existence of broadcast addressAllan Stephens
Eliminates the flag in the TIPC bearer structure that indicates if the bearer supports broadcasting, since the flag is always set to 1 and serves no useful purpose. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Remove unused field in bearer structureAllan Stephens
Eliminates a field in TIPC's bearer objects that is set, but never referenced. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Correct misnamed references to neighbor discovery domainAllan Stephens
Renames items that are improperly labelled as "network scope" items (which are represented by simple integer values) rather than "network domain" items (which are represented by <Z.C.N>-type network addresses). This change is purely cosmetic, and does not affect the operation of TIPC. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Combine bearer structure with tipc_bearer structureAllan Stephens
Combines two distinct structures containing information about a TIPC bearer into a single structure. The structures were previously kept separate so that public information about a bearer could be made available to plug-in media types using TIPC's native API, while the remaining information was kept private for use by TIPC itself. However, now that the native API has been removed there is no longer any need for this arrangement. Since one of the structures was already embedded within the other, the change largely involves replacing instances of "publ.foo" with "foo". The changes do not otherwise alter the operation of TIPC bearers. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2010-12-02tipc: Delete useless function prototypesAllan Stephens
Removes several function declarations that aren't used anywhere, either because they reference routines that no longer exist or because all users of the function reference it after it has already been defined. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02tipc: Remove obsolete inclusions of header filesAllan Stephens
Gets rid of #include statements that are no longer required as a result of the merging of obsolete native API header file content into other TIPC include files. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02tipc: Remove obsolete native API files and exportsAllan Stephens
As part of the removal of TIPC's native API support it is no longer necessary for TIPC to export symbols for routines that can be called by kernel-based applications, nor for it to have header files that kernel-based applications can include to access the declarations for those routines. This commit eliminates the exporting of symbols by TIPC and migrates the contents of each obsolete native API include file into its corresponding non-native API equivalent. The code which was migrated in this commit was migrated intact, in that there are no technical changes combined with the relocation. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12tipc: Reduce footprint by un-inlining bearer congestion routineAllan Stephens
Convert bearer congestion inline routine that is more than one line into a standard function, thereby eliminating some repeated code. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-04tipc: Fix oops on send prior to entering networked mode (v3)Neil Horman
Fix TIPC to disallow sending to remote addresses prior to entering NET_MODE user programs can oops the kernel by sending datagrams via AF_TIPC prior to entering networked mode. The following backtrace has been observed: ID: 13459 TASK: ffff810014640040 CPU: 0 COMMAND: "tipc-client" [exception RIP: tipc_node_select_next_hop+90] RIP: ffffffff8869d3c3 RSP: ffff81002d9a5ab8 RFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000001001001 RBP: 0000000001001001 R8: 0074736575716552 R9: 0000000000000000 R10: ffff81003fbd0680 R11: 00000000000000c8 R12: 0000000000000008 R13: 0000000000000001 R14: 0000000000000001 R15: ffff810015c6ca00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 RIP: 0000003cbd8d49a3 RSP: 00007fffc84e0be8 RFLAGS: 00010206 RAX: 000000000000002c RBX: ffffffff8005d116 RCX: 0000000000000000 RDX: 0000000000000008 RSI: 00007fffc84e0c00 RDI: 0000000000000003 RBP: 0000000000000000 R8: 00007fffc84e0c10 R9: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffc84e0d10 R14: 0000000000000000 R15: 00007fffc84e0c30 ORIG_RAX: 000000000000002c CS: 0033 SS: 002b What happens is that, when the tipc module in inserted it enters a standalone node mode in which communication to its own address is allowed <0.0.0> but not to other addresses, since the appropriate data structures have not been allocated yet (specifically the tipc_net pointer). There is nothing stopping a client from trying to send such a message however, and if that happens, we attempt to dereference tipc_net.zones while the pointer is still NULL, and explode. The fix is pretty straightforward. Since these oopses all arise from the dereference of global pointers prior to their assignment to allocated values, and since these allocations are small (about 2k total), lets convert these pointers to static arrays of the appropriate size. All the accesses to these bits consider 0/NULL to be a non match when searching, so all the lookups still work properly, and there is no longer a chance of a bad dererence anywhere. As a bonus, this lets us eliminate the setup/teardown routines for those pointers, and elimnates the need to preform any locking around them to prevent access while their being allocated/freed. I've updated the tipc_net structure to behave this way to fix the exact reported problem, and also fixed up the tipc_bearers and media_list arrays to fix an obvious simmilar problem that arises from issuing tipc-config commands to manipulate bearers/links prior to entering networked mode I've tested this for a few hours by running the sanity tests and stress test with the tipcutils suite, and nothing has fallen over. There have been a few lockdep warnings, but those were there before, and can be addressed later, as they didn't actually result in any deadlock. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Allan Stephens <allan.stephens@windriver.com> CC: David S. Miller <davem@davemloft.net> CC: tipc-discussion@lists.sourceforge.net bearer.c | 37 ++++++------------------------------- bearer.h | 2 +- net.c | 25 ++++--------------------- 3 files changed, 11 insertions(+), 53 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-02tipc: Don't use structure names which easily globally conflict.David S. Miller
Andrew Morton reported a build failure on sparc32, because TIPC uses names like "struct node" and there is a like named data structure defined in linux/node.h This just regexp replaces "struct node*" to "struct tipc_node*" to avoid this and any future similar problems. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10[NET] TIPC: Fix whitespace errors.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18[TIPC] Avoid polluting the global namespacePer Liden
This patch adds a tipc_ prefix to all externally visible symbols. Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18[TIPC] Minor changes to #includesJon Maloy
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
2006-01-12[TIPC] More updates of file headersPer Liden
Updated copyright notice to include the year the file was actually created. Information about file creation dates was extracted from the files in the old CVS repository at tipc.sourceforge.net. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12[TIPC] Update of file headersPer Liden
The copyright statements from different parts of Ericsson have been merged into one. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12[TIPC] License header updatePer Liden
The license header in each file now more clearly state that this code is licensed under a dual BSD/GPL. Before this was only evident if you looked at the MODULE_LICENSE line in core.c. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12[TIPC] Initial mergePer Liden
TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>