summaryrefslogtreecommitdiffstats
path: root/net/nfc
AgeCommit message (Collapse)Author
2013-08-14NFC: Update secure element stateArron Wang
The secure element state was not updated from the enable/disable ops, leaving the SE state to disabled for ever. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: Fix secure element state checkArron Wang
Another typo from the initial commit where we check for the secure element type field instead of its state when enabling or disabling it. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: hci: Fix enable/disable confusionDan Carpenter
There is a cut and paste bug so we enable a second time instead of disabling. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: netlink: Add result of firmware operation to completion eventEric Lapuyade
Result is added as an NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS attribute containing the standard errno positive value of the completion result. This event will be sent when the firmare download operation is done and will contain the operation result. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: Move nfc_fw_download_done() definition from private to publicEric Lapuyade
This API must be called by NFC drivers, and its prototype was incorrectly placed. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: Add a GET_SE netlink APISamuel Ortiz
In order to fetch the discovered secure elements from an NFC controller, we need to send a netlink command that will dump the list of available SEs from NFC. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: Fix SE discovery failure warning conditionSamuel Ortiz
This is a typo coming from the initial implementation. se_discover fails when it returns something different than zero and we should only display a warning in that case. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOADSamuel Ortiz
Loading a firmware into a target is typically called firmware download, not firmware upload. So we rename the netlink API to NFC_CMD_FW_DOWNLOAD in order to avoid any terminology confusion from userspace. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-19NFC: Fix NCI over SPI buildFrederic Danis
kbuild test robot found following error: net/built-in.o: In function `nci_spi_send': >> spi.c:(.text+0x19a76f): undefined reference to `crc_ccitt' Add CRC_CCITT module to Kconfig to fix it Reported-by: kbuild test robot. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: llcp: Fix the well known services endiannessSamuel Ortiz
The WKS (Well Known Services) bitmask should be transmitted in big endian order. Picky implementations will refuse to establish an LLCP link when the WKS bit 0 is not set to 1. The vast majority of implementations out there are not that picky though... Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: llcp: Set the LLC Link Management well known service bitSamuel Ortiz
In order to advertise our LLCP support properly and to follow the LLCP specs requirements, we need to initialize the WKS (Well-Known Services) bitfield to 1 as SAP 0 is the only mandatory supported service. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: llcp: Do not send pending Tx frames when the remote is not readySamuel Ortiz
When we receive a RNR, the remote is busy processing the last received frame. We set a local flag for that, and we should send a SYMM when it is set instead of sending any pending frame. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: llcp: Fix non blocking sockets connectionsSamuel Ortiz
Without the new LLCP_CONNECTING state, non blocking sockets will be woken up with a POLLHUP right after calling connect() because their state is stuck at LLCP_CLOSED. That prevents userspace from implementing any proper non blocking socket based NFC p2p client. Cc: stable@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Fix a potential memory leakThierry Escande
In nfc_llcp_tx_work() the sk_buff is not freed when the llcp_sock is null and the PDU is an I one. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Keep socket alive until the DISC PDU is actually sentThierry Escande
This patch keeps the socket alive and therefore does not remove it from the sockets list in the local until the DISC PDU has been actually sent. Otherwise we would reply with DM PDUs before sending the DISC one. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Rename nfc_llcp_disconnect() to nfc_llcp_send_disconnect()Thierry Escande
nfc_llcp_send_disconnect() already exists but is not used. nfc_llcp_disconnect() naming is not consistent with other PDU sending functions. This patch removes nfc_llcp_send_disconnect() and renames nfc_llcp_disconnect() Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add secure element enablement netlink APISamuel Ortiz
Enabling or disabling an NFC accessible secure element through netlink requires giving both an NFC controller and a secure element indexes. Once enabled the secure element will handle card emulation once polling starts. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add secure element enablement internal APISamuel Ortiz
Called via netlink, this API will enable or disable a specific secure element. When a secure element is enabled, it will handle card emulation and more generically ISO-DEP target mode, i.e. all target mode cases except for p2p target mode. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Remove and free all SEs when releasing an NFC deviceSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Send netlink events for secure elements additions and removalsSamuel Ortiz
When an NFC driver or host controller stack discovers a secure element, it will call nfc_add_se(). In order for userspace applications to use these secure elements, a netlink event will then be sent with the SE index and its type. With that information userspace applications can decide wether or not to enable SEs, through their indexes. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add secure elements addition and removal APISamuel Ortiz
This API will allow NFC drivers to add and remove the secure elements they know about or detect. Typically this should be called (asynchronously or not) from the driver or the host interface stack detect_se hook. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Extend and fix the internal secure element APISamuel Ortiz
Secure elements need to be discovered after enabling the NFC controller. This is typically done by the NCI core and the HCI drivers (HCI does not specify how to discover SEs, it is left to the specific drivers). Also, the SE enable/disable API explicitely takes a SE index as its argument. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Remove the static supported_se fieldSamuel Ortiz
Supported secure elements are typically found during a discovery process initiated when the NFC controller is up and running. For a given NFC chipset there can be many configurations (embedded SE or not, with or without a SIM card wired to the NFC controller SWP interface, etc...) and thus driver code will never know before hand which SEs are available. So we remove this field, it will be replaced by a real SE discovery mechanism. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add NCI over SPI receiveFrederic Danis
Before any operation, driver interruption is de-asserted to prevent race condition between TX and RX. Transaction starts by emitting "Direct read" and acknowledged mode bytes. Then packet length is read allowing to allocate correct NCI socket buffer. After that payload is retrieved. A delay after the transaction can be added. This delay is determined by the driver during nci_spi_allocate_device() call and can be 0. If acknowledged mode is set: - CRC of header and payload is checked - if frame reception fails (CRC error): NACK is sent - if received frame has ACK or NACK flag: unblock nci_spi_send() Payload is passed to NCI module. At the end, driver interruption is re asserted. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add NCI over SPI sendFrederic Danis
Before any operation, driver interruption is de-asserted to prevent race condition between TX and RX. The NCI over SPI header is added in front of NCI packet. If acknowledged mode is set, CRC-16-CCITT is added to the packet. Then the packet is forwarded to SPI module to be sent. A delay after the transaction is added. This delay is determined by the driver during nci_spi_allocate_device() call and can be 0. After data has been sent, driver interruption is re-asserted. If acknowledged mode is set, nci_spi_send will block until acknowledgment is received. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add basic NCI over SPIFrederic Danis
The NFC Forum defines a transport interface based on Serial Peripheral Interface (SPI) for the NFC Controller Interface (NCI). This module implements the SPI transport of NCI, calling SPI module directly to read/write data to NFC controller (NFCC). NFCC driver should provide functions performing device open and close. It should also provide functions asserting/de-asserting interruption to prevent TX/RX race conditions. NFCC driver can also fix a delay between transactions if needed by the hardware. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: HCI: Follow a positive code path in the HCI ops implementationsSamuel Ortiz
Exiting on the error case is more typical to the kernel coding style. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: HCI: Implement fw_upload opsEric Lapuyade
This is a simple forward to the HCI driver. When driver is done with the operation, it shall directly notify NFC Core by calling nfc_fw_upload_done(). Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add firmware upload netlink commandEric Lapuyade
As several NFC chipsets can have their firmwares upgraded and reflashed, this patchset adds a new netlink command to trigger that the driver loads or flashes a new firmware. This will allows userspace triggered firmware upgrade through netlink. The firmware name or hint is passed as a parameter, and the driver will eventually fetch the firmware binary through the request_firmware API. The cmd can only be executed when the nfc dev is not in use. Actual firmware loading/flashing is an asynchronous operation. Result of the operation shall send a new event up to user space through the nfc dev multicast socket. During operation, the nfc dev is not openable and thus not usable. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: NCI: Fix skb->dev usageFrederic Danis
skb->dev is used for carrying a net_device pointer and not an nci_dev pointer. Remove usage of skb-dev to carry nci_dev and replace it by parameter in nci_recv_frame(), nci_send_frame() and driver send() functions. NfcWilink driver is also updated to use those functions. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-21NFC: Remove commented out LLCP related Makefile linePaul Bolle
The Kconfig symbol NFC_LLCP was removed in commit 30cc458765 ("NFC: Move LLCP code to the NFC top level diirectory"). But the reference to its macro in this Makefile was only commented out. Remove it now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/net/ethernet/emulex/benet/be.h include/net/tcp.h net/mac802154/mac802154.h Most conflicts were minor overlapping stuff. The be2net driver brought in some fixes that added __vlan_put_tag calls, which in net-next take an additional argument. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-04-27NFC: Add missing RFKILL dependency for KconfigMarcel Holtmann
Since the NFC subsystem gained RFKILL support, it needs to be able to build properly with whatever option for RFKILL has been selected. on i386: net/built-in.o: In function `nfc_unregister_device': (.text+0x6a36d): undefined reference to `rfkill_unregister' net/built-in.o: In function `nfc_unregister_device': (.text+0x6a378): undefined reference to `rfkill_destroy' net/built-in.o: In function `nfc_register_device': (.text+0x6a493): undefined reference to `rfkill_alloc' net/built-in.o: In function `nfc_register_device': (.text+0x6a4a4): undefined reference to `rfkill_register' net/built-in.o: In function `nfc_register_device': (.text+0x6a4b3): undefined reference to `rfkill_destroy' net/built-in.o: In function `nfc_dev_up': (.text+0x6a8e8): undefined reference to `rfkill_blocked' when CONFIG_RFKILL=m but NFC is builtin. Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-26NFC: Move LLCP code to the NFC top level diirectorySamuel Ortiz
And stop making it optional. LLCP is a fundamental part of the NFC specifications and making it optional does not make much sense. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-25NFC: llcp: two bugs in ->getname()Dan Carpenter
The sockaddr_nfc_llcp struct has as hole between ->sa_family and ->dev_idx so I've added a memset() to clear it and prevent an information leak. Also the ->nfc_protocol element wasn't set so I've added that. "uaddr->sa_family" and "llcp_addr->sa_family" are the same thing but it's less confusing to use llcp_addr consistently throughout. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-04-12NFC: RFKILL supportSamuel Ortiz
All NFC devices will now get proper RFKILL support as long as they provide some dev_up and dev_down hooks. Rfkilling an NFC device will bring it down while it is left to userspace to bring it back up when being rfkill unblocked. This is very similar to what Bluetooth does. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: Prevent polling when device is downSamuel Ortiz
Some devices turn radio on whenever they're asked to start a poll. To prevent that from happening, we just don't call into the driver start_poll hook when the NFC device is down. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Terminate connection when receiving a DISC on (0,0)Samuel Ortiz
According to the LLCP specs, we must terminate the LLCP link when receiving a DISC with both ssap and dsap set to 0. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Remove local_cleanup last argumentSamuel Ortiz
local_cleanup is always called with device set to false as it means the local LLCP is going away. So no need to pass this switch as an argument. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Only keep raw sockets alive when the LLCP local leavesSamuel Ortiz
When the MAC goes down, connected and connection less sockets should be notified, but raw sockets should be kept alive. They will get notified only when the physical devices goes away. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Add support in getsockopt for RW, LTO, and MIU remote parametersThierry Escande
Useful for LLCP validation tests. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Reset RW, LTO, and MIU remote parameters when link goes downThierry Escande
This resets remote parameters in both local and socket llcp structures when the link goes down. That way, nfc_llcp_getsockopt won't return values corresponding to the previous link parameters. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Use localy stored remote_miu value if not set at socket levelThierry Escande
If remote_miu value is not set in the socket (i.e. connection-less socket) the value stored in the local is used. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Aggregated frames supportThierry Escande
This adds support for AGF PDUs. For each PDU contained in the AGF, a new sk_buff is allocated and dispatched to its corresponding handler. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Fix zero octets length SDU handlingOlivier Guiter
LLCP Validation test #2 (Connection-less information transfer) send a service data unit of zero octets length. This is now handled correctly. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Fall back to local values when getting socket optionsSamuel Ortiz
If a socket option has not been set by the user, fall back to the LLCP local ones. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Socket miux is a big endian fieldSamuel Ortiz
The MIUX must be transmitted in big endian and as such we have to convert it properly. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c