summaryrefslogtreecommitdiffstats
path: root/net/ipv4/fib_frontend.c
AgeCommit message (Collapse)Author
2017-11-01ipv4: fix validate_source for VRF setupPaolo Abeni
David reported breakages of VRF scenarios due to the commit 6e617de84e87 ("net: avoid a full fib lookup when rp_filter is disabled."): the local addresses based test is too strict when VRFs are in place. With this change we fall-back to a full lookup when custom fib rules are in place; so that we address the VRF use case and possibly other similar issues in non trivial setups. v1 -> v2: - fix build breakage when CONFIG_IP_MULTIPLE_TABLES is not defined, reported by the kbuild test robot Reported-by: David Ahern <dsahern@gmail.com> Fixes: 6e617de84e87 ("net: avoid a full fib lookup when rp_filter is disabled.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: avoid a full fib lookup when rp_filter is disabled.Paolo Abeni
Since commit 1dced6a85482 ("ipv4: Restore accept_local behaviour in fib_validate_source()") a full fib lookup is needed even if the rp_filter is disabled, if accept_local is false - which is the default. What we really need in the above scenario is just checking that the source IP address is not local, and in most case we can do that is a cheaper way looking up the ifaddr hash table. This commit adds a helper for such lookup, and uses it to validate the src address when rp_filter is disabled and no 'local' routes are created by the user space in the relevant namespace. A new ipv4 netns flag is added to account for such routes. We need that to preserve the same behavior we had before this patch. It also drops the checks to bail early from __fib_validate_source, added by the commit 1dced6a85482 ("ipv4: Restore accept_local behaviour in fib_validate_source()") they do not give any measurable performance improvement: if we do the lookup with are on a slower path. This improves UDP performances for unconnected sockets when rp_filter is disabled by 5% and also gives small but measurable performance improvement for TCP flood scenarios. v1 -> v2: - use the ifaddr lookup helper in __ip_dev_find(), as suggested by Eric - fall-back to full lookup if custom local routes are present Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09rtnetlink: make rtnl_register accept a flags parameterFlorian Westphal
This change allows us to later indicate to rtnetlink core that certain doit functions should be called without acquiring rtnl_mutex. This change should have no effect, we simply replace the last (now unused) calcit argument with the new flag. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03net: core: Make the FIB notification chain genericIdo Schimmel
The FIB notification chain is currently soley used by IPv4 code. However, we're going to introduce IPv6 FIB offload support, which requires these notification as well. As explained in commit c3852ef7f2f8 ("ipv4: fib: Replay events when registering FIB notifier"), upon registration to the chain, the callee receives a full dump of the FIB tables and rules by traversing all the net namespaces. The integrity of the dump is ensured by a per-namespace sequence counter that is incremented whenever a change to the tables or rules occurs. In order to allow more address families to use the chain, each family is expected to register its fib_notifier_ops in its pernet init. These operations allow the common code to read the family's sequence counter as well as dump its tables and rules in the given net namespace. Additionally, a 'family' parameter is added to sent notifications, so that listeners could distinguish between the different families. Implement the common code that allows listeners to register to the chain and for address families to register their fib_notifier_ops. Subsequent patches will implement these operations in IPv6. In the future, ipmr and ip6mr will be extended to provide these notifications as well. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20ipv4: initialize fib_trie prior to register_netdev_notifier call.Mahesh Bandewar
Net stack initialization currently initializes fib-trie after the first call to netdevice_notifier() call. In fact fib_trie initialization needs to happen before first rtnl_register(). It does not cause any problem since there are no devices UP at this moment, but trying to bring 'lo' UP at initialization would make this assumption wrong and exposes the issue. Fixes following crash Call Trace: ? alternate_node_alloc+0x76/0xa0 fib_table_insert+0x1b7/0x4b0 fib_magic.isra.17+0xea/0x120 fib_add_ifaddr+0x7b/0x190 fib_netdev_event+0xc0/0x130 register_netdevice_notifier+0x1c1/0x1d0 ip_fib_init+0x72/0x85 ip_rt_init+0x187/0x1e9 ip_init+0xe/0x1a inet_init+0x171/0x26c ? ipv4_offload_init+0x66/0x66 do_one_initcall+0x43/0x160 kernel_init_freeable+0x191/0x219 ? rest_init+0x80/0x80 kernel_init+0xe/0x150 ret_from_fork+0x22/0x30 Code: f6 46 23 04 74 86 4c 89 f7 e8 ae 45 01 00 49 89 c7 4d 85 ff 0f 85 7b ff ff ff 31 db eb 08 4c 89 ff e8 16 47 01 00 48 8b 44 24 38 <45> 8b 6e 14 4d 63 76 74 48 89 04 24 0f 1f 44 00 00 48 83 c4 08 RIP: kmem_cache_alloc+0xcf/0x1c0 RSP: ffff9b1500017c28 CR2: 0000000000000014 Fixes: 7b1a74fdbb9e ("[NETNS]: Refactor fib initialization so it can handle multiple namespaces.") Fixes: 7f9b80529b8a ("[IPV4]: fib hash|trie initialization") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-05mpls: fix rtm policy in mpls_getrouteRoopa Prabhu
fix rtm policy name typo in mpls_getroute and also remove export of rtm_ipv4_policy Fixes: 397fc9e5cefe ("mpls: route get support") Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-04ipv4: Export rtm_ipv4_policy.David S. Miller
The MPLS code now needs it. Fixes: 397fc9e5cefe ("mpls: route get support") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30net: lwtunnel: Add extack to encap attr validationDavid Ahern
Pass extack down to lwtunnel_valid_encap_type and lwtunnel_valid_encap_type_attr. Add messages for unknown or unsupported encap types. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30net: ipv4: Add extack message for invalid prefix or lengthDavid Ahern
Add extack error message for invalid prefix length and invalid prefix. Example of the latter is a route spec containing 172.16.100.1/24, where the /24 mask means the lower 8-bits should be 0. Amazing how easy that one is to overlook when an EINVAL is returned. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: ipv4: Add extack messages for route add failuresDavid Ahern
Add messages for non-obvious errors (e.g, no need to add text for malloc failures or ENODEV failures). This mostly covers the annoying EINVAL errors Some message strings violate the 80-columns but searchable strings need to trump that rule. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: ipv4: Plumb extack through route add functionsDavid Ahern
Plumb extack argument down to route add functions. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16net: Improve handling of failures on link and route dumpsDavid Ahern
In general, rtnetlink dumps do not anticipate failure to dump a single object (e.g., link or route) on a single pass. As both route and link objects have grown via more attributes, that is no longer a given. netlink dumps can handle a failure if the dump function returns an error; specifically, netlink_dump adds the return code to the response if it is <= 0 so userspace is notified of the failure. The missing piece is the rtnetlink dump functions returning the error. Fix route and link dump functions to return the errors if no object is added to an skb (detected by skb->len != 0). IPv6 route dumps (rt6_dump_route) already return the error; this patch updates IPv4 and link dumps. Other dump functions may need to be ajusted as well. Reported-by: Jan Moskyto Matejka <mq@ucw.cz> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27net: fib: Decrease one unnecessary rt cache flush in fib_disable_ipGao Feng
The func fib_flush already flushes the rt cache if necessary, so it is not necessary to invoke rt_cache_flush again in fib_disable_ip. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: rtnetlink: plumb extended ack to doit functionDavid Ahern
Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse for doit functions that call it directly. This is the first step to using extended error reporting in rtnetlink. >From here individual subsystems can be updated to set netlink_ext_ack as needed. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22ipv4: provide stronger user input validation in nl_fib_input()Eric Dumazet
Alexander reported a KMSAN splat caused by reads of uninitialized field (tb_id_in) from user provided struct fib_result_nl It turns out nl_fib_input() sanity tests on user input is a bit wrong : User can pretend nlh->nlmsg_len is big enough, but provide at sendmsg() time a too small buffer. Reported-by: Alexander Potapenko <glider@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-01net: route: add missing nla_policy entry for RTA_MARK attributeLiping Zhang
This will add stricter validating for RTA_MARK attribute. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-26ipv4: add missing initialization for flowi4_uidJulian Anastasov
Avoid matching of random stack value for uid when rules are looked up on input route or when RP filter is used. Problem should affect only setups that use ip rules with uid range. Fixes: 622ec2c9d524 ("net: core: add UID to flows, rules, and routes") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18lwtunnel: fix autoload of lwt modulesDavid Ahern
Trying to add an mpls encap route when the MPLS modules are not loaded hangs. For example: CONFIG_MPLS=y CONFIG_NET_MPLS_GSO=m CONFIG_MPLS_ROUTING=m CONFIG_MPLS_IPTUNNEL=m $ ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2 The ip command hangs: root 880 826 0 21:25 pts/0 00:00:00 ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2 $ cat /proc/880/stack [<ffffffff81065a9b>] call_usermodehelper_exec+0xd6/0x134 [<ffffffff81065efc>] __request_module+0x27b/0x30a [<ffffffff814542f6>] lwtunnel_build_state+0xe4/0x178 [<ffffffff814aa1e4>] fib_create_info+0x47f/0xdd4 [<ffffffff814ae451>] fib_table_insert+0x90/0x41f [<ffffffff814a8010>] inet_rtm_newroute+0x4b/0x52 ... modprobe is trying to load rtnl-lwt-MPLS: root 881 5 0 21:25 ? 00:00:00 /sbin/modprobe -q -- rtnl-lwt-MPLS and it hangs after loading mpls_router: $ cat /proc/881/stack [<ffffffff81441537>] rtnl_lock+0x12/0x14 [<ffffffff8142ca2a>] register_netdevice_notifier+0x16/0x179 [<ffffffffa0033025>] mpls_init+0x25/0x1000 [mpls_router] [<ffffffff81000471>] do_one_initcall+0x8e/0x13f [<ffffffff81119961>] do_init_module+0x5a/0x1e5 [<ffffffff810bd070>] load_module+0x13bd/0x17d6 ... The problem is that lwtunnel_build_state is called with rtnl lock held preventing mpls_init from registering. Given the potential references held by the time lwtunnel_build_state it can not drop the rtnl lock to the load module. So, extract the module loading code from lwtunnel_build_state into a new function to validate the encap type. The new function is called while converting the user request into a fib_config which is well before any table, device or fib entries are examined. Fixes: 745041e2aaf1 ("lwtunnel: autoload of lwt modules") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rulesAlexander Duyck
In the case of custom rules being present we need to handle the case of the LOCAL table being intialized after the new rule has been added. To address that I am adding a new check so that we can make certain we don't use an alias of MAIN for LOCAL when allocating a new table. Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Reported-by: Oliver Brunel <jjk@jjacky.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-03ipv4: fib: Allow for consistent FIB dumpingIdo Schimmel
The next patch will enable listeners of the FIB notification chain to request a dump of the FIB tables. However, since RTNL isn't taken during the dump, it's possible for the FIB tables to change mid-dump, which will result in inconsistency between the listener's table and the kernel's. Allow listeners to know about changes that occurred mid-dump, by adding a change sequence counter to each net namespace. The counter is incremented just before a notification is sent in the FIB chain. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All conflicts were simple overlapping changes except perhaps for the Thunder driver. That driver has a change_mtu method explicitly for sending a message to the hardware. If that fails it returns an error. Normally a driver doesn't need an ndo_change_mtu method becuase those are usually just range changes, which are now handled generically. But since this extra operation is needed in the Thunder driver, it has to stay. However, if the message send fails we have to restore the original MTU before the change because the entire call chain expects that if an error is thrown by ndo_change_mtu then the MTU did not change. Therefore code is added to nicvf_change_mtu to remember the original MTU, and to restore it upon nicvf_update_hw_max_frs() failue. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16ipv4: Restore fib_trie_flush_external function and fix call orderingAlexander Duyck
The patch that removed the FIB offload infrastructure was a bit too aggressive and also removed code needed to clean up us splitting the table if additional rules were added. Specifically the function fib_trie_flush_external was called at the end of a new rule being added to flush the foreign trie entries from the main trie. I updated the code so that we only call fib_trie_flush_external on the main table so that we flush the entries for local from main. This way we don't call it for every rule change which is what was happening previously. Fixes: 347e3b28c1ba2 ("switchdev: remove FIB offload infrastructure") Reported-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04net: core: add UID to flows, rules, and routesLorenzo Colitti
- Define a new FIB rule attributes, FRA_UID_RANGE, to describe a range of UIDs. - Define a RTA_UID attribute for per-UID route lookups and dumps. - Support passing these attributes to and from userspace via rtnetlink. The value INVALID_UID indicates no UID was specified. - Add a UID field to the flow structures. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28switchdev: remove FIB offload infrastructureJiri Pirko
Since this is now taken care of by FIB notifier, remove the code, with all unused dependencies. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28fib: introduce FIB notification infrastructureJiri Pirko
This allows to pass information about added/deleted FIB entries/rules to whoever is interested. This is done in a very similar way as devinet notifies address additions/removals. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06net: Don't delete routes in different VRFsMark Tomlinson
When deleting an IP address from an interface, there is a clean-up of routes which refer to this local address. However, there was no check to see that the VRF matched. This meant that deletion wasn't confined to the VRF it should have been. To solve this, a new field has been added to fib_info to hold a table id. When removing fib entries corresponding to a local ip address, this table id is also used in the comparison. The table id is populated when the fib_info is created. This was already done in some places, but not in ip_rt_ioctl(). This has now been fixed. Fixes: 021dd3b8a142 ("net: Add routes to the table associated with the device") Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09net: Remove fib_local variableDavid Ahern
After commit 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") fib_local is set but not used. Remove it. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06net: vrf: Create FIB tables on link createDavid Ahern
Tables have to exist for VRFs to function. Ensure they exist when VRF device is created. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24ipv4/fib: don't warn when primary address is missing if in_dev is deadPaolo Abeni
After commit fbd40ea0180a ("ipv4: Don't do expensive useless work during inetdev destroy.") when deleting an interface, fib_del_ifaddr() can be executed without any primary address present on the dead interface. The above is safe, but triggers some "bug: prim == NULL" warnings. This commit avoids warning if the in_dev is dead Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-22ipv4: initialize flowi4_flags before calling fib_lookup()Lance Richardson
Field fl4.flowi4_flags is not initialized in fib_compute_spec_dst() before calling fib_lookup(), which means fib_table_lookup() is using non-deterministic data at this line: if (!(flp->flowi4_flags & FLOWI_FLAG_SKIP_NH_OIF)) { Fix by initializing the entire fl4 structure, which will prevent similar issues as fields are added in the future by ensuring that all fields are initialized to zero unless explicitly initialized to another value. Fixes: 58189ca7b2741 ("net: Fix vti use case with oif in dst lookups") Suggested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13ipv4: Don't do expensive useless work during inetdev destroy.David S. Miller
When an inetdev is destroyed, every address assigned to the interface is removed. And in this scenerio we do two pointless things which can be very expensive if the number of assigned interfaces is large: 1) Address promotion. We are deleting all addresses, so there is no point in doing this. 2) A full nf conntrack table purge for every address. We only need to do this once, as is already caught by the existing masq_dev_notifier so masq_inet_event() can skip this. Reported-by: Solar Designer <solar@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org>
2015-12-13net: Flush local routes when device changes vrf associationDavid Ahern
The VRF driver cycles netdevs when an interface is enslaved or released: the down event is used to flush neighbor and route tables and the up event (if the interface was already up) effectively moves local and connected routes to the proper table. As of 4f823defdd5b the local route is left hanging around after a link down, so when a netdev is moved from one VRF to another (or released from a VRF altogether) local routes are left in the wrong table. Fix by handling the NETDEV_CHANGEUPPER event. When the upper dev is an L3mdev then call fib_disable_ip to flush all routes, local ones to. Fixes: 4f823defdd5b ("ipv4: fix to not remove local route on link down") Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were fixing the "BH-ness" of the counter bumps whilst in 'net-next' the functions were modified to take an explicit 'net' parameter. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-01ipv4: fix to not remove local route on link downJulian Anastasov
When fib_netdev_event calls fib_disable_ip on NETDEV_DOWN event we should not delete the local routes if the local address is still present. The confusion comes from the fact that both fib_netdev_event and fib_inetaddr_event use the NETDEV_DOWN constant. Fix it by returning back the variable 'force'. Steps to reproduce: modprobe dummy ifconfig dummy0 192.168.168.1 up ifconfig dummy0 down ip route list table local | grep dummy | grep host local 192.168.168.1 dev dummy0 proto kernel scope host src 192.168.168.1 Fixes: 8a3d03166f19 ("net: track link-status of ipv4 nexthops") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23ipv4: implement support for NOPREFIXROUTE ifa flag for ipv4 addressPaolo Abeni
Currently adding a new ipv4 address always cause the creation of the related network route, with default metric. When a host has multiple interfaces on the same network, multiple routes with the same metric are created. If the userspace wants to set specific metric on each routes, i.e. giving better metric to ethernet links in respect to Wi-Fi ones, the network routes must be deleted and recreated, which is error-prone. This patch implements the support for IFA_F_NOPREFIXROUTE for ipv4 address. When an address is added with such flag set, no associated network route is created, no network route is deleted when said IP is gone and it's up to the user space manage such route. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/dsa/slave.c net/dsa/slave.c simply had overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: Initialize flow flags in input pathDavid Ahern
The fib_table_lookup tracepoint found 2 places where the flowi4_flags is not initialized. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: Replace vrf_dev_table and friendsDavid Ahern
Replace calls to vrf_dev_table and friends with l3mdev_fib_table and kin. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: Replace vrf_master_ifindex{, _rcu} with l3mdev equivalentsDavid Ahern
Replace calls to vrf_master_ifindex_rcu and vrf_master_ifindex with either l3mdev_master_ifindex_rcu or l3mdev_master_ifindex. The pattern: oif = vrf_master_ifindex(dev) ? : dev->ifindex; is replaced with oif = l3mdev_fib_oif(dev); And remove the now unused vrf macros. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01net: Make table id type u32David Ahern
A number of VRF patches used 'int' for table id. It should be u32 to be consistent with the rest of the stack. Fixes: 4e3c89920cd3a ("net: Introduce VRF related flags and helpers") 15be405eb2ea9 ("net: Add inet_addr lookup by table") 30bbaa1950055 ("net: Fix up inet_addr_type checks") 021dd3b8a142d ("net: Add routes to the table associated with the device") dc028da54ed35 ("inet: Move VRF table lookup to inlined function") f6d3c19274c74 ("net: FIB tracepoints") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29net: FIB tracepointsDavid Ahern
A few useful tracepoints developing VRF driver. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net: Add routes to the table associated with the deviceDavid Ahern
When a device associated with a VRF is brought up or down routes should be added to/removed from the table associated with the VRF. fib_magic defaults to using the main or local tables. Have it use the table with the device if there is one. A part of this is directing prefsrc validations to the correct table as well. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net: Fix up inet_addr_type checksDavid Ahern
Currently inet_addr_type and inet_dev_addr_type expect local addresses to be in the local table. With the VRF device local routes for devices associated with a VRF will be in the table associated with the VRF. Provide an alternate inet_addr lookup to use a specific table rather than defaulting to the local table. inet_addr_type_dev_table keeps the same semantics as inet_addr_type but if the passed in device is enslaved to a VRF then the table for that VRF is used for the lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net: Add inet_addr lookup by tableDavid Ahern
Currently inet_addr_type and inet_dev_addr_type expect local addresses to be in the local table. With the VRF device local routes for devices associated with a VRF will be in the table associated with the VRF. Provide an alternate inet_addr lookup to use a specific table rather than defaulting to the local table. Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net: Use VRF device index for lookups on RXDavid Ahern
On ingress use index of VRF master device for route lookups if real device is enslaved. Rules are expected to be installed for the VRF device to direct lookups to a specific table. Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21route: Extend flow representation with tunnel keyThomas Graf
Add a new flowi_tunnel structure which is a subset of ip_tunnel_key to allow routes to match on tunnel metadata. For now, the tunnel id is added to flowi_tunnel which allows for routes to be bound to specific virtual tunnels. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21ipv4: support for fib route lwtunnel encap attributesRoopa Prabhu
This patch adds support in ipv4 fib functions to parse user provided encap attributes and attach encap state data to fib_nh and rtable. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-23 15:20:22 +0000