Age | Commit message (Collapse) | Author |
|
Three conflicts, one of which, for marvell10g.c is non-trivial and
requires some follow-up from Heiner or someone else.
The issue is that Heiner converted the marvell10g driver over to
use the generic c45 code as much as possible.
However, in 'net' a bug fix appeared which makes sure that a new
local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0
is cleared.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzbot found out that running BPF_PROG_TEST_RUN with repeat=0xffffffff
makes process unkillable. The problem is that when CONFIG_PREEMPT is
enabled, we never see need_resched() return true. This is due to the
fact that preempt_enable() (which we do in bpf_test_run_one on each
iteration) now handles resched if it's needed.
Let's disable preemption for the whole run, not per test. In this case
we can properly see whether resched is needed.
Let's also properly return -EINTR to the userspace in case of a signal
interrupt.
See recent discussion:
http://lore.kernel.org/netdev/CAH3MdRWHr4N8jei8jxDppXjmw-Nw=puNDLbu1dQOFQHxfU2onA@mail.gmail.com
I'll follow up with the same fix bpf_prog_test_run_flow_dissector in
bpf-next.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The input is packet data, the output is struct bpf_flow_key. This should
make it easy to test flow dissector programs without elaborate
setup.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-12-11
The following pull-request contains BPF updates for your *net-next* tree.
It has three minor merge conflicts, resolutions:
1) tools/testing/selftests/bpf/test_verifier.c
Take first chunk with alignment_prevented_execution.
2) net/core/filter.c
[...]
case bpf_ctx_range_ptr(struct __sk_buff, flow_keys):
case bpf_ctx_range(struct __sk_buff, wire_len):
return false;
[...]
3) include/uapi/linux/bpf.h
Take the second chunk for the two cases each.
The main changes are:
1) Add support for BPF line info via BTF and extend libbpf as well
as bpftool's program dump to annotate output with BPF C code to
facilitate debugging and introspection, from Martin.
2) Add support for BPF_ALU | BPF_ARSH | BPF_{K,X} in interpreter
and all JIT backends, from Jiong.
3) Improve BPF test coverage on archs with no efficient unaligned
access by adding an "any alignment" flag to the BPF program load
to forcefully disable verifier alignment checks, from David.
4) Add a new bpf_prog_test_run_xattr() API to libbpf which allows for
proper use of BPF_PROG_TEST_RUN with data_out, from Lorenz.
5) Extend tc BPF programs to use a new __sk_buff field called wire_len
for more accurate accounting of packets going to wire, from Petar.
6) Improve bpftool to allow dumping the trace pipe from it and add
several improvements in bash completion and map/prog dump,
from Quentin.
7) Optimize arm64 BPF JIT to always emit movn/movk/movk sequence for
kernel addresses and add a dedicated BPF JIT backend allocator,
from Ard.
8) Add a BPF helper function for IR remotes to report mouse movements,
from Sean.
9) Various cleanups in BPF prog dump e.g. to make UAPI bpf_prog_info
member naming consistent with existing conventions, from Yonghong
and Song.
10) Misc cleanups and improvements in allowing to pass interface name
via cmdline for xdp1 BPF example, from Matteo.
11) Fix a potential segfault in BPF sample loader's kprobes handling,
from Daniel T.
12) Fix SPDX license in libbpf's README.rst, from Andrey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use data_size_out as a size hint when copying test output to user space.
ENOSPC is returned if the output buffer is too small.
Callers which so far did not set data_size_out are not affected.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After commit f42ee093be29 ("bpf/test_run: support cgroup local
storage") the bpf_test_run() function may fail with -ENOMEM, if
it's not possible to allocate memory for a cgroup local storage.
This error shouldn't be mixed with the return value of the testing
program. Let's add an additional argument with a pointer where to
store the testing program's result; and make bpf_test_run()
return either 0 or -ENOMEM.
Fixes: f42ee093be29 ("bpf/test_run: support cgroup local storage")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Tests are added to make sure CGROUP_SKB cannot access:
tc_classid, data_meta, flow_keys
and can read and write:
mark, prority, and cb[0-4]
and can read other fields.
To make selftest with skb->sk work, a dummy sk is added in
bpf_prog_test_run_skb().
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In order to introduce per-cpu cgroup storage, let's generalize
bpf cgroup core to support multiple cgroup storage types.
Potentially, per-node cgroup storage can be added later.
This commit is mostly a formal change that replaces
cgroup_storage pointer with a array of cgroup_storage pointers.
It doesn't actually introduce a new storage type,
it will be done later.
Each bpf program is now able to have one cgroup storage of each type.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Allocate a temporary cgroup storage to use for bpf program test runs.
Because the test program is not actually attached to a cgroup,
the storage is allocated manually just for the execution
of the bpf program.
If the program is executed multiple times, the storage is not zeroed
on each run, emulating multiple runs of the program, attached to
a real cgroup.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
sykzaller triggered several panics similar to the below:
[...]
[ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90
[ 248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425
[...]
[ 248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13
[ 248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018
[ 248.865905] Call Trace:
[ 248.865910] dump_stack+0xd6/0x185
[ 248.865911] ? show_regs_print_info+0xb/0xb
[ 248.865913] ? printk+0x9c/0xc3
[ 248.865915] ? kmsg_dump_rewind_nolock+0xe4/0xe4
[ 248.865919] print_address_description+0x6f/0x270
[ 248.865920] kasan_report+0x25b/0x380
[ 248.865922] ? _copy_to_user+0x5c/0x90
[ 248.865924] check_memory_region+0x137/0x190
[ 248.865925] kasan_check_read+0x11/0x20
[ 248.865927] _copy_to_user+0x5c/0x90
[ 248.865930] bpf_test_finish.isra.8+0x4f/0xc0
[ 248.865932] bpf_prog_test_run_skb+0x6a0/0xba0
[...]
After scrubbing the BPF prog a bit from the noise, turns out it called
bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing
wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb()
and the same skb thus keeps changing until the pskb_expand_head() called
from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM.
So upon return we'll basically have 0 headroom left yet blindly do the
__skb_push() of 14 bytes and keep copying data from there in bpf_test_finish()
out of bounds. Fix to check if we have enough headroom and if pskb_expand_head()
fails, bail out with error.
Another bug independent of this fix (but related in triggering above) is
that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to
it's original state from input as otherwise repeating the same test in a
loop won't work for benchmarking when underlying input buffer is getting
changed by the prog each time and reused for the next run leading to
unexpected results.
Fixes: 1cf1cae963c2 ("bpf: introduce BPF_PROG_TEST_RUN command")
Reported-by: syzbot+709412e651e55ed96498@syzkaller.appspotmail.com
Reported-by: syzbot+54f39d6ab58f39720a55@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
after introduction of bpf_xdp_adjust_tail helper packet length
could be changed not only if xdp->data pointer has been changed
but xdp->data_end as well. making bpf_prog_test_run aware of this
possibility
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
syzkaller was able to generate the following XDP program ...
(18) r0 = 0x0
(61) r5 = *(u32 *)(r1 +12)
(04) (u32) r0 += (u32) 0
(95) exit
... and trigger a NULL pointer dereference in ___bpf_prog_run()
via bpf_prog_test_run_xdp() where this was attempted to run.
Reason is that recent xdp_rxq_info addition to XDP programs
updated all drivers, but not bpf_prog_test_run_xdp(), where
xdp_buff is set up. Thus when context rewriter does the deref
on the netdev it's NULL at runtime. Fix it by using xdp_rxq
from loopback dev. __netif_get_rx_queue() helper can also be
reused in various other locations later on.
Fixes: 02dd3291b2f0 ("bpf: finally expose xdp_rxq_info to XDP bpf-programs")
Reported-by: syzbot+1eb094057b338eb1fc00@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This work enables generic transfer of metadata from XDP into skb. The
basic idea is that we can make use of the fact that the resulting skb
must be linear and already comes with a larger headroom for supporting
bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work
on a similar principle and introduce a small helper bpf_xdp_adjust_meta()
for adjusting a new pointer called xdp->data_meta. Thus, the packet has
a flexible and programmable room for meta data, followed by the actual
packet data. struct xdp_buff is therefore laid out that we first point
to data_hard_start, then data_meta directly prepended to data followed
by data_end marking the end of packet. bpf_xdp_adjust_head() takes into
account whether we have meta data already prepended and if so, memmove()s
this along with the given offset provided there's enough room.
xdp->data_meta is optional and programs are not required to use it. The
rationale is that when we process the packet in XDP (e.g. as DoS filter),
we can push further meta data along with it for the XDP_PASS case, and
give the guarantee that a clsact ingress BPF program on the same device
can pick this up for further post-processing. Since we work with skb
there, we can also set skb->mark, skb->priority or other skb meta data
out of BPF, thus having this scratch space generic and programmable
allows for more flexibility than defining a direct 1:1 transfer of
potentially new XDP members into skb (it's also more efficient as we
don't need to initialize/handle each of such new members). The facility
also works together with GRO aggregation. The scratch space at the head
of the packet can be multiple of 4 byte up to 32 byte large. Drivers not
yet supporting xdp->data_meta can simply be set up with xdp->data_meta
as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out,
such that the subsequent match against xdp->data for later access is
guaranteed to fail.
The verifier treats xdp->data_meta/xdp->data the same way as we treat
xdp->data/xdp->data_end pointer comparisons. The requirement for doing
the compare against xdp->data is that it hasn't been modified from it's
original address we got from ctx access. It may have a range marking
already from prior successful xdp->data/xdp->data_end pointer comparisons
though.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just do the rename into bpf_compute_data_pointers() as we'll add
one more pointer here to recompute.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure we apply NET_IP_ALIGN when reserving headroom for SKB
and XDP test runs, just like a real driver would.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Instead, pass the kattr in which has a kernel side copy of this
data structure from userspace already.
Fix based upon a suggestion from Alexei Starovoitov.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
development and testing of networking bpf programs is quite cumbersome.
Despite availability of user space bpf interpreters the kernel is
the ultimate authority and execution environment.
Current test frameworks for TC include creation of netns, veth,
qdiscs and use of various packet generators just to test functionality
of a bpf program. XDP testing is even more complicated, since
qemu needs to be started with gro/gso disabled and precise queue
configuration, transferring of xdp program from host into guest,
attaching to virtio/eth0 and generating traffic from the host
while capturing the results from the guest.
Moreover analyzing performance bottlenecks in XDP program is
impossible in virtio environment, since cost of running the program
is tiny comparing to the overhead of virtio packet processing,
so performance testing can only be done on physical nic
with another server generating traffic.
Furthermore ongoing changes to user space control plane of production
applications cannot be run on the test servers leaving bpf programs
stubbed out for testing.
Last but not least, the upstream llvm changes are validated by the bpf
backend testsuite which has no ability to test the code generated.
To improve this situation introduce BPF_PROG_TEST_RUN command
to test and performance benchmark bpf programs.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|